Svenman2

- Outcome of the installation/update: UNSUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Motherboard: Acer FSB 1333 Q45T-AM v:1.0 | CPU: Intel Xeon D-1527| RAM: 5120 MB - Additional comments: From af DS3617xs to update 6.2.1-23824 does not work !!! Test it first with a spare drive I recommend.

- Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2-23739 - Loader version and model: JUN'S LOADER v1.03b - DS3617xs to DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Motherboard: Acer FSB 1333 Q45T-AM v:1.0 | CPU: INTEL Core i3-4130| RAM: 5120 MB - Additional comments: Following are the steps I have implemented to upgrade from model DS3617xs with version 6.2-23739 to DS3615xs with version 6.2.1-23824 update 4: old hard drive there on DS3617xs with version 6.2-23739 stop the PC. install DS3615xs on usb reboot install version 6.2-23739 for DS3615xs. test whether everything has been saved. update to 6.2.1-23824 update 4 (test data was saved.) Turn off the PC. connect disks with data to start pc install Version 6.2.1-23824 update 4 for the DS3615xs. everything work! UPDATE From af DS3617xs to update 6.2.1-23824 does not work !!! Test it first with a spare drive I recommend.

Also see my update problems

NAS back online. All data intact! Thanks a LOT. see my forum post how I did it. https://xpenology.com/forum/topic/13535-my-experience-with-update-from-jun-v102-alpha-to-v103b/

Hi everybody, I'm still quite new with XPEnology but I've been running the summer vacation on an old PC. At the bottom you will find the PC information. Today I wanted to update my XPEnology PC. I quickly arrived at the Forum that v1.02 is not suitable for DSM 6.2! so looking for which version I ran now and Jun V1.02 with DSM 6.1.6-15266 update 1. Then the last version of DSM 6.2.1-23824 and JUNV1.03B after I did this I went to the installation procedure to follow, so put new USB in there JUN and PC restart and put I want DSM 6.2.1-23824 and PC reboot okay everything seems good to this point! I can not see my NAS coming online with an IP address !!!! so panic of what now. In doing so, I first went to see if I could go back to a previous version of DSM, unfortunately I could not get an IP address with every reboot of a recovery. Then JUN version went back the same story. Then I tried after hours and searched for this link Here were some tips that I have followed and I succeeded and I now run on version DSM 6.2-23739 with last JUN V1.03B Steps I have taken (YOU HAVE ALL YOUR APPS LOST BUT DATA REMAINS ON DISKS) 1) Disconnect all disks 2) Connect a spare HDD to SATA port 1 3) reinstall USB with JUN V1.03B and download DSM DSM 6.2-23739, create an administrator user and a server name that matches the live system, do NOT make volume / raid. (Update DSM with your pre-beta version) 4) Shut down, reconnect raid drives to SATA ports 2-n 5) Restart, log in, go to Storage Manager there you can fix partitions on raid, Check if all your data is visible again and switch off NAS. 6) Remove backup HDD and reconnect raid drives to SATA ports 1-n 7) Start your NAS, Login and check your data. 8) Turn off automatic update. I also updated from DSM 6.2-23739 to DSM 6.2.1-23824 while attempting to repair my NAS AND THAT'S NOT WELL !! DO NOT UPDATE !! OLD PC SPEC JUN Versie V1.03B DSM Versie 6.2-23739 XPEnology Model DS3617xs CPU Intel Xeon D-1527 CPU clock rate 2.5 GHz CPU Cores 4 RAM 5120 MB HHD 2x 1 TB + 1x 4TB I hope you have some information about this, how you can update and downgrade and what you should not do. If anyone has any questions, I would love to hear it. Best regards, Svenman2