Anyone have any ideas here. From what i can gather 6.2.1 has broken tg3 (used by broadcom and others). HP Microserver Gen8 relies on this for its HP Ethernet 1Gb 2-port 332i Adapter (2133). 6.2 and 6.2.1 use same kernel level driver. For now i have put in a PCIE Intel NIC but need to free this port up for SATA card
I have tried to recompile the drivers and add both to Juns loader 1.03b and manually (usr/lib/modules and .firmware + modprobe and insmod)
No joy, just get the following error in DMESG and insmod just hangs
[ 19.651923] tg3.c:v3.132 (May 21, 2013)
[ 19.663818] BUG: unable to handle kernel paging request at 00000000ffffffff
Weird that the device is detected and driver assigned - perhaps driver is bad in this update? ifconfig shows nothing
0000:03:00.0 Class 0200: Device 14e4:165f
Subsystem: Device 103c:2133
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fabf0000 (64-bit, prefetchable)
Memory at fabe0000 (64-bit, prefetchable)
Memory at fabd0000 (64-bit, prefetchable)
[virtual] Expansion ROM at fab00000 [disabled]
Capabilities: [48] Power Management version 3
Capabilities: [50] Vital Product Data
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [a0] MSI-X: Enable- Count=17 Masked-
Capabilities: [ac] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Device Serial Number 00-00-34-64-a9-9a-09-64
Capabilities: [150] Power Budgeting <?>
Capabilities: [160] Virtual Channel
Kernel driver in use: tg3
Comparing 6.2 to 6.2.1 i can see both are kernel 3.10.105 and make use of the tg3 kernel driver tg3.c:v3.132 (May 21, 2013)
