Jump to content
XPEnology Community

Bogey

Transition Member
  • Posts

    16
  • Joined

  • Last visited

Everything posted by Bogey

  1. the it87 is just there. I think the os just recognised it during boot. did you check any bios settings?
  2. Yes, the USB3 ports work in Open Media Vault work I played with OMV before I moved to DSM. I cannot recall it exactly but I believe that it the USB3 ports worked when I first started with DSM, but that was either with version 6.1 or a very early 6.2 Inserting an USB3 card will be a hit/miss procedure. One might say old chips will be supported and new ones not, but as we've seen in my case: older chipsets don't work necessary either Nevertheless I appreciate your help IG-88. A pity we couldn't get it to work.
  3. So a probable reason why the other Thecus Xpenology user does have a working USB3 port, is that it has a newer chip or firmware? That’s a pity. Yes, you’re right, there’s a pci 1x expansion slot. Is there a particular that you can recommend, one that offers the highest chance to work? (I wouldn’t use the phrase “guaranteed to work” - lol)
  4. No. The Bios is pretty basic. I’ve been looking for an update, but didn’t find any. Nor an unlock of hidden features. It’s Phoenix securecore tiano 2.2 I also tried disabling all USB settings in BIos. I can bootfrom the front ports. lsusb shows up empty except for the last two xhci ports, but with no devices.
  5. Yep, I upped it to usbportcfg="0xffffff000" -- no luck I also tinkered with BIOS settings, but no difference there either. In BIOS I also enabled ALL USB ports available: 6 UHCI and 2 EHCI. But from what I understand that's just two addresses for the same physical port, just an updated version (USB 1.1 and USB 2), correct? There's in the BIOS nothing that speaks of XHCI With all USB ports enabled in BIOS, lsusb shows: |__usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1a.7) hub |__usb2 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1d.7) hub |__2-1 f400:f400:0110 00 2.00 480MBit/s 200mA 1IF (Imation Nano 0791132C023A) |__usb3 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.0) hub |__usb4 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.1) hub |__usb5 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.2) hub |__usb6 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.0) hub |__6-2 0922:0020:0112 00 2.00 12MBit/s 2mA 1IF (DYMO DYMO LabelWriter 450 15061208355398) |__usb7 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.1) hub |__usb8 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.2) hub |__usb9 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (xhci_hcd 0000:03:00.0) hub |__usb10 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (xhci_hcd 0000:03:00.0) hub they're obviously there, those last two xhci is them, right? I've attached a new generated dmesg output too, I hope you see something that could help solve this? dmesg.txt
  6. with dmesg only 8 ports are found. also lsusb shows 8. the number of "f'" should be adequate, right? lsusb with all ports filled shows: |__usb1 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1a.7) hub |__usb2 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (ehci_hcd 0000:00:1d.7) hub |__2-1 f400:f400:0110 00 2.00 480MBit/s 200mA 1IF (Imation Nano 0791132C023A) |__2-3 058f:6387:0107 00 2.00 480MBit/s 100mA 1IF (Generic Mass Storage 9E122AC4) |__2-4 0781:5151:0020 00 2.00 480MBit/s 200mA 1IF (SanDisk Corporation Cruzer Micro SNDK4045250566506303) |__usb3 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1a.0) hub |__usb4 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.0) hub |__4-2 0922:0020:0112 00 2.00 12MBit/s 2mA 1IF (DYMO DYMO LabelWriter 450 15061208355398) |__usb5 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.1) hub |__usb6 1d6b:0001:0310 09 1.10 12MBit/s 0mA 1IF (uhci_hcd 0000:00:1d.2) hub |__usb7 1d6b:0002:0310 09 2.00 480MBit/s 0mA 1IF (xhci_hcd 0000:03:00.0) hub |__usb8 1d6b:0003:0310 09 3.00 5000MBit/s 0mA 1IF (xhci_hcd 0000:03:00.0) hub These 4 are all on the back. The two front ports don't show as having found a device (though there are USB flash drive in it). Device 2-1 is my boot device. View from the back is: | usb 2-4 | usb 2-3 | usb 4-2 | usb 2-1 | eSata
  7. Thank you IG-88. That did change something, in dmesg.txt this is now gone: [ 18.561705] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 18.563226] hub 7-0:1.0: couldn't allocate port 2 usb_device [ 24.562167] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 24.562180] hub 8-0:1.0: couldn't allocate port 1 usb_device And this is now there: [ 80.436756] usbcore: registered new interface driver usblp [ 80.640420] usbcore: registered new interface driver usbhid [ 80.640427] usbhid: USB HID core driver But, no USB drive found when inserted in front (yet).
  8. I have a Thecus N7510 running very stable for about two years now. There's one thing bugging me and that is that the two USB3 ports on the front are not working. A fellow Thecus owner has a slightly different model (5 bays instead of 7 and less USB ports). His USB3 port on the front is working fine on his rig. The controller is the same. I generated dmesg > dmesg.txt -- I find: - up to ata10 SATA entries, - ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver - ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver - xhci_hcd 0000:03:00.0: xHCI Host Controller [ 11.982054] ACPI: bus type USB registered [ 11.982648] usbcore: registered new interface driver usbfs [ 11.982958] usbcore: registered new interface driver hub [ 11.985305] usbcore: registered new interface driver ethub [ 11.991474] usbcore: registered new device driver usb [ 12.044255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 12.064521] ehci-pci: EHCI PCI platform driver [ 12.064717] ehci-pci 0000:00:1a.7: setting latency timer to 64 [ 12.064737] ehci-pci 0000:00:1a.7: EHCI Host Controller [ 12.064750] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 12.064774] ehci-pci 0000:00:1a.7: debug port 1 [ 12.068711] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported [ 12.068754] ehci-pci 0000:00:1a.7: irq 18, io mem 0xc0604c00 [ 12.073979] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 12.074639] hub 1-0:1.0: USB hub found [ 12.074658] hub 1-0:1.0: 2 ports detected [ 12.075091] ehci-pci 0000:00:1d.7: setting latency timer to 64 [ 12.075119] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 12.075138] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 12.075172] ehci-pci 0000:00:1d.7: debug port 1 [ 12.079124] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported [ 12.079190] ehci-pci 0000:00:1d.7: irq 23, io mem 0xc0604800 [ 12.085009] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 12.086184] hub 2-0:1.0: USB hub found [ 12.086215] hub 2-0:1.0: 6 ports detected [ 12.132375] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 12.155401] uhci_hcd: USB Universal Host Controller Interface driver [ 12.155654] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 12.155666] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 12.155691] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 12.155751] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060a0 [ 12.156752] hub 3-0:1.0: USB hub found [ 12.156775] hub 3-0:1.0: 2 ports detected [ 12.157182] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 12.157193] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 12.157213] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 12.157274] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00006080 [ 12.160612] hub 4-0:1.0: USB hub found [ 12.160651] hub 4-0:1.0: 2 ports detected [ 12.161140] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 12.161153] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.161174] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 12.161238] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006060 [ 12.166040] hub 5-0:1.0: USB hub found [ 12.166072] hub 5-0:1.0: 2 ports detected [ 12.166488] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 12.166501] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.166527] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 12.166593] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040 [ 12.175048] hub 6-0:1.0: USB hub found [ 12.175073] hub 6-0:1.0: 2 ports detected [ 12.252953] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 12.252976] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 7 [ 12.258420] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 12.258437] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 12.258449] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 12.258461] xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X [ 12.258475] xhci_hcd 0000:03:00.0: irq 51 for MSI/MSI-X [ 12.259265] xHCI xhci_add_endpoint called for root hub [ 12.259274] xHCI xhci_check_bandwidth called for root hub [ 12.259720] hub 7-0:1.0: USB hub found [ 12.259750] hub 7-0:1.0: 2 ports detected [ 12.259970] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 12.259987] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8 [ 12.262403] xHCI xhci_add_endpoint called for root hub [ 12.262412] xHCI xhci_check_bandwidth called for root hub [ 12.262911] hub 8-0:1.0: USB hub found [ 12.262941] hub 8-0:1.0: 2 ports detected [ 12.353584] usbcore: registered new interface driver usb-storage [ 12.410288] VMware PVSCSI driver - version 1.0.2.0-k [ 12.410889] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 12.431553] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 12.452532] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 12.517922] Fusion MPT base driver 3.04.20 [ 12.517928] Copyright (c) 1999-2008 LSI Corporation [ 12.555451] usb-storage 2-1:1.0: USB Mass Storage device detected [ 12.555621] scsi10 : usb-storage 2-1:1.0 [ 12.555635] Fusion MPT SPI Host driver 3.04.20 [ 12.595793] Fusion MPT SAS Host driver 3.04.20 [ 12.617425] Fusion MPT misc device (ioctl) driver 3.04.20 [ 12.617736] mptctl: Registered with Fusion MPT base driver [ 12.617745] mptctl: /dev/mptctl @ (major,minor=10,220) So I edited my /etc/synoinfo.conf and /etc.default/synoinfo.conf esataportcfg="0xff00000" internalportcfg="0xfff" usbportcfg="0xff000" Unfortunately no USB drives are detected when inserted in either of the front USB ports. At the end of the dmesg.txt I read: [ 18.561705] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 18.563226] hub 7-0:1.0: couldn't allocate port 2 usb_device [ 24.562167] xhci_hcd 0000:03:00.0: Timeout while waiting for a slot [ 24.562180] hub 8-0:1.0: couldn't allocate port 1 usb_device Funny thing is that I can boot DSM from the front USB! I'm definitely in for some guru guidance... Thanks, Eddie
  9. Please read everything first before doing the actual stuff! I logged in as root: sudo -i Then, from the thread above, I followed post #36 by 'gdw1963'. However: * I did not edit the .profile * I created file S99fancontrol.sh in /volume1/@optware/etc/init.d/S99fancontrol.sh Do note that running pwmconfig will overwrite the contents of /etc/fancontrol. The contents of my /etc/fancontrol are: # Configuration file generated by pwmconfig, changes will be lost INTERVAL=5 DEVPATH=hwmon1=devices/platform/it87.656 DEVNAME=hwmon1=it8728 FCTEMPS=hwmon1/device/pwm1=hwmon1/device/temp2_input hwmon1/device/pwm3=hwmon1/device/temp2_input FCFANS=hwmon1/device/pwm1=hwmon1/device/fan1_input hwmon1/device/pwm3=hwmon1/device/fan3_input MINTEMP=hwmon1/device/pwm1=20 hwmon1/device/pwm3=20 MAXTEMP=hwmon1/device/pwm1=60 hwmon1/device/pwm3=60 MINSTART=hwmon1/device/pwm1=150 hwmon1/device/pwm3=150 MINSTOP=hwmon1/device/pwm1=70 hwmon1/device/pwm3=70 MINPWM=hwmon1/device/pwm1=70 hwmon1/device/pwm3=70 MAXPWM=hwmon1/device/pwm1=255 hwmon1/device/pwm3=255 As you can see I assigned the temp and fan monitors different than gdw1963 so the result of running sensors are: It's summer now and the temperature outside is near 25 degrees C, inside it's a little cooler: 23 degrees C. The fans are NOT rotating at max speed. Current disk temperatures (not shown but can be found in Storage Manager >HDD/SDD > Health info) are 34-35 degrees C. root@N7510:~# sensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +42.0 C (crit = +100.0 C) Core 1: +42.0 C (crit = +100.0 C) it8728-isa-0290 Adapter: ISA adapter in0: +1.20 V (min = +1.93 V, max = +2.28 V) ALARM in1: +1.54 V (min = +0.44 V, max = +0.07 V) ALARM in2: +3.02 V (min = +1.86 V, max = +2.38 V) ALARM in3: +2.84 V (min = +0.65 V, max = +2.72 V) ALARM in4: +2.03 V (min = +2.38 V, max = +0.54 V) ALARM in5: +1.07 V (min = +2.65 V, max = +0.48 V) ALARM in6: +2.51 V (min = +2.39 V, max = +0.02 V) ALARM 3VSB: +1.66 V (min = +4.80 V, max = +2.59 V) ALARM Vbat: +3.29 V fan1: 1464 RPM (min = 49 RPM) fan3: 1480 RPM (min = 19 RPM) temp1: +35.0 C (low = -102.0 C, high = +68.0 C) sensor = thermal diode temp2: +38.0 C (low = +58.0 C, high = +53.0 C) sensor = thermal diode temp3: +33.0 C (low = -68.0 C, high = +52.0 C) sensor = thermal diode intrusion0: ALARM I did not do the last steps, after the last 'shutdown -h now' I was done. If everything turns out well your NAS reboots, fans are high and then after a while they go quiet. Do note, that I have enabled Smart Fan Control in BIOS, I enabled it AFTER doing the pwm settings, first you just should have them enabled.: Smart CPU Fan - Enabled Start temp: 30 degrees C. Smart AUX Fan - Enabled Start temp: 30 degrees C. Good luck!
  10. I’ll post the steps from the above thread that work for me. They’ve survived a couple of updates so far (also from 6.1 to 6.2).
  11. I used this on my Thecus N7510:
  12. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-4 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Thecus N7510 - Additional comments: USB 3.0 on front (still) not working (NEC D720200AF)
  13. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-1 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Thecus N7510 - Additional comments: USB 3.0 on front (still) not working (NEC D720200AF)
  14. Bogey

    DSM 6.2 Loader

    Well, the 7 drives are connected to a PCIe Silicon Image SiI3132 controller. I use the 1.03b DS3615xs loader without any patches. The internal DOM is disconnected and the loader is on a very cheap 2GB Imation flash drive. Ethernet is 2x Intel WG82574L.
  15. Bogey

    DSM 6.2 Loader

    Upgrade to 6.2.1 went like a charm
  16. Bogey

    DSM 6.2 Loader

    Thanks Jun! Thecus N7510: Intel Atom D2701, 4GB, RAID6 (7x WD 3TB Red), 2x Intel 1GB LAN, Fans working with lm-sensors, LCD and LEDs not working. 1.03b installer DS 6.2-23739 (DS3615xs): SUCCESSFUL UPGRADE DS6.2-23739 --> DS6.2-23739 Update 2: SUCCESS
×
×
  • Create New...