Jump to content
XPEnology Community

Big_11

Member
  • Posts

    83
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Big_11

  1. as @billat29 posted before... i'm pretty sure that 6.2.4-xxx is not supported by this loader (anyway if MBR or GPT)... @HermanCruzpls read carefully the Attentions at the top if this forum !! espacially this "Critical Update READ ME topic - IMPORTANT - XPEnology Community"
  2. @caltabpi It's quiet easy, i think... You only have to create an Bootable USB Stick in MBR Format with the same parameters (VolSize) as seen in the image.. and then simply copy the content of the original Image to this partitions...
  3. i tried this method on my 1.Box (HPE Microserver Gen8) and it works perfectly.. Thanks.. But at my "Spare"-Box (HPE Microserver Gen10) with Broadcomm Raid Controller it won't work.. I get no access to the Raid Array, surely lack of any driver for this.. Is there a solution to get this driver working (Insmod modprobe?) to geht access to the Disk-Array ?? I was trying it with Rescue Disk 6.0.4. .. Thank you
  4. i don't know about this Maschine, but possibly something went wrong creating the Boot Stick... be aware if the Stick is GPT or MBR formatted... good luck
  5. I'm not shure and haven't an Acer anymore, but i thin it was a Version of 6.1.....
  6. which Version? i think it was ver 6.1, better than 6.2...
  7. nothing special to Do but reinstall Power-Button Package... and first of all: Do a Backup!...
  8. did you looked for the "Power-Button" Package in this forum? this worked well for me but had to be reinstalled after Updates.. rgds
  9. I'm Not Sure, but you should use pat file from 6.2 Not 6.2.2.... the correct Version is shown at Synology Assistant and lower than 24922... good luck..
  10. I will report of a succesful installation and update of an HPE Proliant Microserver Gen8 (819185-421) to DMS3615xs Ver 6.2.3 - 25423 without inserting any Intel-Nic in it... what i did.... first i tried to install it from an USB-Stick (greater than 8GB) from the lower USB Port on the backside... which worked without making any changing in the bios.. as this worked i tried to install it from the internal SD-Card Reader.. this often fails with the "famous" error 13 (!) so i checked and found that the internal SD-Card Reader needs different vid and pid than my external reader attached to the pc where i brought the images to it! in my case this is vid=0x0424 and pid=0x4030 !! Don't be sure if this is the same at all this boxes.... Then i installed with with Jun's loader 103b for 3615xs with Polanskimans additon found here https://mega.nz/#!OV4gVKyZ!dCgfXx1bgAOyvbFwFiov3s7RSNoFuqnAcNmSllLoUiw first i downloaded the approbiate pat file (for 6.2 not for 6.2.2!) directly from Synology.. DSM_DS3615xs_23739.pat and installed it manually... many times ... and saw it worked... :-) then i got crocky and tride the diabolic ! wanted to update to DSM 6.2.3 -25423 directly ... from the direct "Download and recovery option" with downloading the offerde update it won't work... so i faund taht on Syn*.. Pages there is a patch file for this version and i tried ths... and it worked.... So same hours the box runs -- first creating and cheking the created volumes... I will report more, if i got more experiences which packages i need (Powerbutton, etc.) and don't forget, do alll at your own risk don't do that on an productiv system withaout having any Backup! so, take care and sty healthy ! regards Big11
  11. you can find it in the grub.cfg file.. so it is based on 1.03b rgds Big_11
  12. Hi, i ran in same Problems like above installing (using) VMM on an HPe Gen 10 running XPenology DS918+ DSM 6.2.2-24922 Update 4.. I installed VMM but cannot start it.. after that uninstalled it and tried to reinstall but without success… The package Comes Always as "to repair", also when i did manually steps like @magara .. VMM Version is 2.5.0 - 9432 are there some more issues with VMM i'm not aware ? Thanks for help...
  13. "Powerbutton" spk ist installiert?...
  14. It seems to be a driver issue.. Look if your RAID-Adapter is supported! Try Another "extra.lzma" for your Version of bootloader...
  15. @S__M Sorry, i wasn't inform About your post… here we go.. https://mega.nz/#!CoxnjADQ!tlKxrPQpjWItkVuDWyAEhKycUyj03HERs8YOdoFgvg8 regards Big11
  16. @Ziploc which Version do you use… i'm not sure and away from home, but i think it works with Version Powerbutton Package 4.2. @ikon i got mine for € 190,- incl. 1 TB HDD.... 😎
  17. No, i changed HW to a HPe Gen10 Which works with 6.2.2 flawless....
  18. Got new experience…. Acer H340 boots also from GPT BootLoaders (104b) but can't finally not install DSM 6.2.2 I tried a lot but ever ended at Error 13 (Disc Image possibly corrupted) ... I checked VID/PID many times .. used different USB Sticks.. but Nothing works.. Need any hints of what is going wrong !!! i'm not sure About the DS918+ Serial … Tried it with that inside the Loader and also with a Serial found anywhere in the Internet... but also failed… pls give me a hint or a working Loader ? Thank you
  19. That's what i did... But Loader 1.04 is GPT and the H340 boots only from MBR.. Which parts of the original Image should be the reason for the Error 13 After 57% of installing?....
  20. Hi, i need some help.. Since days i try to install DSM 6.2.x on a Acer H340 I used the Image of a 102b MBR Loader. mounted it in OSF Mount and replaced the files with the one from an DS918+ 1-04b Image. changed the values in grub.cfg to fit to my USB Stick. first i changed the Serail to one i found ….. and second left it unchanged… My Acer H340 boots up and i can find it through Synology Assistant and upload (or download) the DSM file.. (tried different) but at approx 57% the Installation (Migration) stops and the famous Error 13 come up!. any hints for that? i tried several sticks, checked the VID and PID many times cleared all the drives in the box etc. etc. any suggestions ? Thanks a lot… PS: another H340 Box works like a charm with DSM 6.1.7, but i wanted to have 6.2.x..
  21. For those who need a MBR Bootloader for DSM 6.2 i've uploaded it here, if someone will give them a Chance... i've successfully installed this on an Supermicro X7DBP-i with Intel Blackford 5000P Chipset. It is a loader for the DSM6.2-23739.pat and can be directly upgraded to 6.2.2-24922 Update 2.. http://ul.to/zg58eusm this loader is based on Jun's Mod of Genesys Loader and done with their help!... Thanks a lot..
  22. Big_11

    DSM 6.2 Loader

    GOT IT !!!... I've succesfully installed DSM 6.2.2-24922 update 2 to my Supermicro Server !!!.. After a lot of fails with installing for 916+ or 918+ i tried the DS3615xs Version Took the 1.02 MBR Loader of Genesys and replaced the files with thes from 1.03b Loader… and it worked ! i'am happy thanks to all for your support and by now i am really more experienced !.. have a nice day..
  23. @Ikon That's absolutly right... Your topic helped me absolutly and my H340 (Got two of them.. One fore spare! ) is runnig since there without any Problem! And faster and with more Tasks as my Buffalo NAS'es before.. Thank's a lot.... One Thing i try now, is to Upgrade to DSM 6.2.x.. But i can't find any images with MBR with the approbiate Files... But i continue trying and searching..
  24. So i See the difference... I've installed DS916+... So maybe there are different Updates...
×
×
  • Create New...