canuckbrian

Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: VM | ESXi 6.7.0 Update 2 (Build 13981272) - Additional comments: Remove USB 2.0 controller and add USB 3.0 controller. Reboot required.

Bump... any suggestions?

Is your NIC an onboard device or a discrete card? If it's onboard check your BIOS settings, some systems have WOL settings in the BIOS. If it's a discrete card sometimes they have a boot up firmware you can enter to configure various options, see if there is anything in there about WOL. Is your NIC even capable of doing WOL?

Hello, I'm having a problem with my newly installed Xpenology NAS getting the SSD Cache setup. Hardware Specs CPU: 2 x Xeon E5620 Motherboard: SuperMicro X8DT3 RAM: 36GB DDR3 1333 ECC Hard Drives: 4 x Seagate Barracuda 2TB SSD Drives: 2 x Samsung 840 SSD 128GB DSM Loader: 6.2 (Jun's) The 4 Seagate drives were in a different bare metal chassis before that was running Jun's 6.1 v1.02b (DS3615xs). I moved the drives to the new bare metal machine and booted up the DSM 6.2 loader and performed a re-install preserving data. Everything is working great so far. In my old setup I didn't have a cache drive because I didn't have the sATA ports available for it, but in the new machine I do. I installed two 128GB Samsung Evo 840 SSD's to onboard ports 1 & 2. The 4 drives are using the Broadcom 1068E 8-Port SAS Controller that's built into the motherboard. They appear as drives 9 thru 12 in DSM. The SSD's appear as drives 1 & 2 in DSM. When using the SSD Cache Wizard I select Read / Write Cache, select my 2 SSD disks, select RAID 1 and when pressing Next on this stage of the Wizard I get an error "Connection failed. Please check your network settings." See attached screenshot. I also tried with just one drive, it doesn't ask for a RAID level obviously, but at the screen where you select the Cache SSD I press next and see the same error message displayed. No idea what I'm doing wrong. Any help would be appreciated. Thanks!