un4given

@psychodracon i gave up and went with xpenology in a PROXMOX VM 😀

hello lads, does any1 of you have LSI 9207-8i running with 1.03a loader for DS918+? i can't make it visible in synology. saw people using it. cant install 1.03b and 3615 on my G4560 and Asrock H270M mobo, only ds918+

oh, sry. i forgot to mention the board. it is MSI B250M Mortar with 16GB Memory. I went through all possible settings, but nothing helped. but it is hard to say, maybe there is a combination which will work. need to spend some more time testing. thought maybe some1 had already issues, since there are some users in forum with similar combo of G4560 and B250M boards. i will also try to run 6.1 on my old hardware. Ahtlon 5350 with AM1 ITX board. if it works, so its hardware issue. Most probably it is the mainboard issue. i saw other users were able to use this combo with 1.03a DS918+ loader. lets see how it will work for me. i will also try to run the new combo on 5.2 and see how it will run.

Hello every1, so before switching from 5.2 to 6.2 and also changing my Athlon 5350 Build to G4560 i decided to build a small Test NAS with G4560 and see if i have any problems. Pity, problems came - functionality is missing which actually was the reason i didnt switch to unraid. My Power Settings doenst seem to work. For me it is very important that my NAS Automatically shuts down and starts again at some specific time. After i installed 6.2 and did basic configuration i tried to restart the NAS. This worked flawlessly. But as soon as i wanted to Shutdown the NAS manually, not very much happened. I heard the HDD shutdown but the mainboard kept running till i pushed power button. Any1 can help me with the investigation? What else can i do? I already tried different BIOS Settings, but nothing helped. I read that i also should try new CR2032 Mainboard battery and see how it goes. For me, it definately is a mainboard problem. Hope some1 has other ideas how i could proceed. I like Synology for its nice and tidy UI and functionality and dont want to switch to unraid or run synology in a VM on unraid thx in advance