kula

Hi all! I'm not that lucky. I've tried upgrading from 6.1 to 6.2 without success. I get the File currupt (13) error during both migration and re-install with md5 checked pat-file. Same HW bare metal Supermicro itx board with Atom 2550 and onboard quad intel nic running fine before. I've downloaded Jun's 1.03b loader and updated the vid/pid/sn/mac. Everything else is untouched. For troubleshooting I noticed that telnet isn't open when the box boots but after the installation error I can use telnet and I've tried to get some logs. Only somewhat helpful is /var/log/messages that looks like this: Aug 12 22:05:03 install.cgi: Remove /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Aug 12 22:05:03 install.cgi: Create /tmpData/upd@te...cmd=[/bin/mkdir -p /tmpData/upd@te > /dev/null 2>&1] Aug 12 22:05:03 install.cgi: Untar /tmpData/upd@te.pat...cmd=[/bin/tar xpf "/tmpData/upd@te.pat" -C /tmpData/upd@te > /dev/null 2>&1] Aug 12 22:05:04 install.cgi: ErrFHOSTCheckUpgradeFile: Remove /tmpData/upd@te.pat... Aug 12 22:05:04 install.cgi: Verify codesign of [/tmpData/upd@te]... Aug 12 22:05:07 install.cgi: Verify checksum of [/tmpData/upd@te]... Aug 12 22:05:09 install.cgi: Pass checksum of /tmpData/upd@te... Aug 12 22:05:09 updater: updater.c:6006 Start of the updater... Aug 12 22:05:09 updater: updater.c:2812 orgBuildNumber = 23739, newBuildNumber=23739 Aug 12 22:05:09 updater: updater_util.c:52 fail to read company in /tmpRoot//etc.defaults/synoinfo.conf Aug 12 22:05:09 updater: file_check_key_value.c:25 SLIBCFileGetKeyValue(runccc) failed [0x0900 file_get_key_value.c:29] Aug 12 22:05:09 updater: updater.c:6272 ==== Start flash update ==== Aug 12 22:05:09 updater: updater.c:6276 This is X86 platform Aug 12 22:05:09 updater: boot/boot_lock.c(227): failed to mount boot device /dev/synoboot2 /tmp/bootmnt (errno:2) Aug 12 22:05:09 updater: updater.c:5816 Failed to mount boot partition Aug 12 22:05:09 updater: updater.c:2711 No need to reset reason for v.23739 Aug 12 22:05:09 updater: updater.c:6810 Failed to accomplish the update! (errno = 21) Aug 12 22:05:09 install.cgi: ninstaller.c:1822 Executing [/tmpData/upd@te/updater -v /tmpData > /dev/null 2>&1] error[21] Aug 12 22:05:13 install.cgi: ninstaller.c:206 Mount partion /dev/md0 /tmpRoot Aug 12 22:05:13 install.cgi: ninstaller.c:1791 Moving updater for configuration upgrade...cmd=[/bin/mv -f /tmpData/upd@te/updater /tmpRoot/.updater > /dev/null 2>&1] Aug 12 22:05:13 install.cgi: ninstaller.c:235 umount partition /tmpRoot Aug 12 22:05:13 install.cgi: ErrFHOSTCleanPatchDirFile: After updating /tmpData/upd@te...cmd=[/bin/rm -rf /tmpData/upd@te > /dev/null 2>&1] Aug 12 22:05:13 install.cgi: ErrFHOSTCleanPatchDirFile: Remove /tmpData/upd@te.pat... Aug 12 22:05:13 install.cgi: ErrFHOSTDoUpgrade(2407): child process failed, retv=-21 Aug 12 22:05:13 install.cgi: ninstaller.c:2415(ErrFHOSTDoUpgrade) err=[-1] Aug 12 22:05:13 install.cgi: ninstaller.c:2424(ErrFHOSTDoUpgrade) retv=[-21] Aug 12 22:05:13 install.cgi: install.c:948 Upgrade by the manual patch fail. Aug 12 22:05:13 install.cgi: install.c:1263 Upgrade by the uploaded patch /tmpData/@autoupdate/upload.pat fail. The /dev/synoboot2 device doesn't exist so I'm note sure what that is. Any suggestions?