Jeong

Thanks for the reply. But I tried setting the same but it doesn't work. I think a crack version problem, but everyone seems to be doing well. Is there any other way to try it?

https://www.synology.com/en-us/knowledgebase/Surveillance/help/SurveillanceStation/camera_get_stream_path This is a stream share

SurveillanceStation-x86_64-8.2.7-6222_patch_40.spk Функция потокового общего ресурса не работает. Ты такой же? Stream share path function does not work. Are you the same?

There is no error when updating the Instant flash. An error occurs when you update the windows. I made a good update without any problems. However, the 1.04b loader is not operating properly.

Here it is. http://asrock.pc.cdn.bitgravity.com/BIOS/CPU/J4205-ITX(1.50)ROM.zip http://asrock.pc.cdn.bitgravity.com/BIOS/CPU/J4205-ITX(1.60)ROM.zip Never update in Windows!! only Instant flash update.

I upgraded my J4205-ITX BIOS to 1.60P and tested it, but /dev/dri still does not exist. I gave up and bought the original synology DS918+ today. Asrock continues to produce Gemini Lake bios, but upgrading Apollo Lake bios to version 1.60P will not solve the problem. (e.g. MCE error) I think Asrock has abandoned the Apollo Lake ITX board.

There seems to be a problem with the bios version. Upon searching, it appears that the Bios 1.5 and 1.6 versions of J3455-ITX and J4205-ITX have brick issues and some bugs have not been fixed. The bios versions of most J3455 and J4205 that are not working properly appear to be 1.4. This is just my think.

I regret my poor English. What is your motherboard for? Many people using Asrock's J3455 and J4205 are currently experiencing a situation where the /dev/dri folder does not exist and would like to know why you only operate normally. 1. Is it the main board of Asrock? 2. What's the bios version of Asrock's main board? 3. Is there any change to the bios setting you have noticed? 4. How many HDDs do you use? 5. Do you think there is a change depending on the type of USB memory? As you know, I would appreciate it if you could answer these questions. Thank you very much for your help.

First of all, Thanks Jun for all your work. And I regret my poor English. While using J4205 system, I'm also getting the same error that shows "does not exist /dev/dri" In addition, power does not turn off automatically when shutting down the system Attempted to use passthrough through ESXi, but J4205 does not support passthrough. In version 1.03a2, /dev/dri existed, but the system was very unstable and writes very slowly. Will you please provide solution for this problem? Thank you