Jump to content
XPEnology Community

mrmvd

Member
  • Posts

    47
  • Joined

  • Last visited

Everything posted by mrmvd

  1. Hello everyone After the RAID array was broken and the volume was recreated, the multimedia server stopped working normally - it does not see new files in directories, and stopping/starting does not help. The only thing that works is to completely remove the package and install it again. Then he sees the files that were at the time of installation, but again he does not see the new ones. I am using DSM 7.1 4622 Update 3. What can be done?
  2. I can't even install them thru synology package manager.
  3. Reporting: DSM 7.1 does't allow it to install
  4. Did anyone find a way to stop log flood for users that have no NVIDIA GPU?
  5. Hi! Thanks for work. Can you pleas compile VMtools for DVA1622? It is Geminilake, and DVA3221 on Atom C3538 it's codename Denverton
  6. You are absolutely right, but in my case, hardware RAID is an additional layer of abstraction for DSM, with which I want to avoid possible tripping it on disks.
  7. I enabled admin account in DSM 7.1 and looking for a ways to disable notification about how insecure is to have admin account
  8. So far, I have decided that it is most convenient to divide the RAID volume into virtual disks and assemble JBODs from them inside the DSM. When increasing the RAID array (which is also a very long operation), you can simply add a new virtual disk to the JBOD that occupies all the free space of the new array. Unfortunately, DSM 7.1 does not work very well with the number of disks greater than 16, all these problems with Sataportmap do not allow us to think that in the future, with the restructuring of the disk system, DSM 7.1 will not fail and will not be blocked. With hardware RAID, there is a problem with parallelization of write operations, which software RAID does natively by the number of disks, but fundamentally the writeback cache increases the write speed to comparable levels.
  9. Коллеги, покритикуйте костыли. Я хочу добиться того, чтобы в хост с DSM7 под ESX можно было беспроблемно добавлять / удалять диски, не заморачиваясь с Satamap? Пока что в голову пришла только такая идея: собирать RAID на контроллере и пробрасывать его через виртуальные диски (не RDM) в DSM. Внутри DSM пул строить вида JBOD, и если нужно например расширить дисковое пространство, то расширять сам массив через утилиту RAID контроллера, ждать пока ESX увидит свободное место, создавать там новый виртуальный диск, пробрасывать его в DSM и добавлять в существующий JBOD. Что скажете, насколько это всё жизнеспособно?
  10. I never did it before, will try to find how it's to do at sunday. If you have link to step-by-step guide how to receive serial log, please provide it to me, because it's something new for me
  11. Здравствуйте. Устанавливаю DSM виртуалкой на ESX 6.7 с аппаратным пробросом SAS контроллера и SAS + SATA дисками и не могу понять, как DSM 7 маппит харды. Вот у меня была (и есть) DSM 6.2 DS3617, в которой я прописал единожды через Synoinfo параметры Maxdisks, sataports и esataports сразу с запасом на 16 хардов, а потом со временем просто добавлял винчестеры в корзину - и они появлялись в DSM. Там у меня было просто - контроллер LSI, на 16 портов, к которому подключены по 1 накопителю на порт. В новой машине у меня Adaptec 8405 в режиме HBA + экспандер Adaptec 82888T, к которому буду подключать суммарно 30 накопителей, причём разных: SAS, SATA, HDD, SSD и думаю NVME SSD через виртуальный диск VMware. Установил TRPC 8 с образом DSM3622xs+ 7.1-42661. И вот что имею. Сейчас я могу к новому серверу подключить всего 7 аппаратных дисков, но я хочу убедиться, что и 36 она увидит. Я добавляю виртуальные HDD в виртуалку - больше 16 дисков суммарно не видит. (всего подключено 18, один из них под TRPC, второй просто повесил на SATA0:0 чтобы на него DSM поставить). Как мне заранее убедиться, что новые диски, которые я буду переносить из старого сервера под DSM 6.2 в новый под DSM 7.1 увидятся? Сколько бы я ни добавлял виртуальных дисков, загрузчик при команде satamap now выдаёт: Sataportmap=1 DiskIdxmap=10 И всё равно больше 16 дисков она не видит: Куда копать-то? Можно вообще достичь на DSM 7.1 беспроблемной установки 24-32 дисков, чтобы без перезагрузок, без перекомпилирования загрузчика работало? Может там прописать какие параметры с запасом?
  12. 918+ works with DSM 6.2 TRPC DX3622xs works with VMXNet3 with DSM 7.1 42661
  13. v0.3-alpha5 - VMXNET3 still not works
  14. Hello everyone. I have an Adaptec 8405 hardware RAID controller and a DSM 6.2 for ESXi 6.7. I create a hardware RAID volume (yes, I know that DSM works better with its own volumes, but that's not about it now) and send a 1.07 Tb array to the DSM via RDM. When I add more disks to the array and Adaptec expands the volume to 2.7 Tb, Xpenology continues to see the old volume of 1.07 Tb without rebooting, although both the Datastore and the RDM file already have a new size of 2.7 Tb. The ESX documentation says that in such cases it is necessary to rescan the disk volume in the operating system itself, but I do not know how to do a rescan in DSM. Tell me, who dealt with a hardware RAID under the DSM, how can you expand the array without restarting the DSM?
  15. When I try to rebuild loader, I see error: Also I see only 6 of 8 HDDs connected to my Adaptec 8405 card thru expander BTW, Is Mellanox Connect-X 2 supported?
  16. Thank you for answer. I find that with Automated Redpill Loader controller works fine under DSM 7.1 DS3622xs
  17. Just find this topic and test under VMWare ESXi 6.7U3. VMXNet3 driver did't work, E1000e boots fine. Thank you!
  18. Hello, friends. Recently purchased an Adaptec 8405 card, when installing Jun 1.03b does not see it. Tell me, have you already learned how to run these cards under DSM 6.2? I am installing the system via VMware ESX 6.7 u3.
  19. Горячо всех приветствую. Есть у меня Xpenology 6.2 крутящаяся на ESXi 6.7 с загрузчиком Jun 1.4b, и хочу я обновиться с сохранением данных и настроек, желательно на имидж серии DS36xx чтобы было побольше дисков. Правильно ли я понимаю порядок действий? 1) Устанавливаем ESXi 7 чтобы получить доступ к проброске диска с интерфейса SATA 2) Качаем и настраиваем RedPill по инструкции с форума, запускаем, устанавливаем DSM 7, 3) Обновляем DSM 7.1 4) И вот теперь подсовываем старые харды, точнее в моём случае делаем проброс контроллера LSI в Xpenology? Вот тут вопросы - всякие пакеты типа Active Backup for Business не надо устанавливать до подсовывания дисков? Есть там какие-то хитрости в подсовывании своих дисков с данными? Не хотелось бы рисковать лишний раз, у меня 4 RAID массива и штук 20 папок с шарами. 5) Нужно все диски разом пробрасывать или можно сначала для тестирования пробросить один массив, посмотреть что будет, а потом добавить остальные? 6) Нужно ли устанавливать какие-то драйверы дополнительно? Помню на DSM 6.2 я ставил driver pack, но нужен ли он был или нет - не знаю. 7) Не нашли никакого способа смотреть smart с SAS хардов встроенными средствами Xpenology? Покамест всё, спасибо.
  20. I transfer PhotoStation between NAS via Hyper Backup, but when restoring to a new NAS, the albums lose their sorting order. Is there a way to save it when migrating?
×
×
  • Create New...