HansMeier

Okay, dann kann ich da wohl nicht viel machen. Die Hardware ist zum anfüttern und vorhanden - dann gibt es eben doch kein Transcoding, wäre halt ganz nett gewesen. Den Loader 1.03a2 habe ich noch getestet, hatte damit aber auch keinen Erfolg. Egal, mit den anderen Variante läuft es ja - danke!

Ich versuche die DS916-Variante auf o.g. Board zu installieren. Die 3615 und 3617-Varianten laufen problemlos, hier verzweifle ich noch. Nach Installation ist das System nicht erreichbar. Aufruf der Adresse im Browser führt zum abschalten des Boards. Über den Umweg Upgrade von 3617 auf 916 konnte ich immerhin per SSH auf die Box und habe folgendes in messages gefunden: 2018-06-27T21:28:43+02:00 Syno2 kernel: [ 35.147960] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com> 2018-06-27T21:28:43+02:00 Syno2 kernel: [ 35.147960] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>. 2018-06-27T21:28:43+02:00 Syno2 kernel: [ 35.147960] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>. 2018-06-27T21:28:44+02:00 Syno2 synostorage: synostorage_int_disk.c:346 Disk [sdb] info cache generated 2018-06-27T21:28:45+02:00 Syno2 kernel: [ 36.908452] mtrr: type mismatch for d0000000,10000000 old: write-through new: write-combining 2018-06-27T21:28:46+02:00 Syno2 kernel: [ 38.799059] et131x: module is from the staging directory, the quality is unknown, you have been warned. 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105547] BUG: unable to handle kernel NULL pointer dereference at 0000000000000011 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105558] IP: [<ffffffff8135a1d1>] syno_ahci_disk_led_enable+0x31/0x180 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105562] PGD 63234067 PUD 6189a067 PMD 0 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105564] Oops: 0000 [#1] SMP 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105678] CPU: 0 PID: 7431 Comm: insmod Tainted: P C O 3.10.102 #15284 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105680] Hardware name: ASUS All Series/N3050T, BIOS 0407 02/06/2017 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105682] task: ffff880064ab8040 ti: ffff880063204000 task.ti: ffff880063204000 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105688] RIP: 0010:[<ffffffff8135a1d1>] [<ffffffff8135a1d1>] syno_ahci_disk_led_enable+0x31/0x180 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105692] RSP: 0018:ffff880063207cd8 EFLAGS: 00010202 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105693] RAX: ffff88006726f000 RBX: 0000000000000001 RCX: ffff880063d334b0 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105695] RDX: 000000000000000a RSI: 0000000000000000 RDI: ffff88006726f380 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105697] RBP: ffff880063207ee8 R08: 00000000000024c0 R09: 00000000000024c0 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105698] R10: 0000000000002640 R11: 0000000000002640 R12: ffff88006726f000 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105700] R13: 0000000000000001 R14: 0000000000000001 R15: ffffffffa0cab6c0 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105702] FS: 00007f303cbb1700(0000) GS:ffff88006a200000(0000) knlGS:0000000000000000 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105704] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105705] CR2: 0000000000000011 CR3: 0000000064863000 CR4: 00000000001007f0 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105707] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105708] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105709] Stack: 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105715] ffffffffa0ca4270 ffff880063207ee8 0000000000000000 ffffffffa0cab710 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105718] 0000000000000001 ffffffffa0cab6c0 ffffffffa0ca7705 ffffffff8182d040 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105721] 0000000000000001 ffffffffa0cab6c0 ffffffff81160f7f 0000011500000002 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105722] Call Trace: 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105738] [<ffffffffa0ca4270>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios] 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105747] [<ffffffffa0ca7705>] ? synobios_model_init+0x1a5/0x390 [braswell_synobios] 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105754] [<ffffffff81160f7f>] ? proc_alloc_inum+0x2f/0xb0 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105757] [<ffffffff81161099>] ? proc_register+0x99/0x140 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105762] [<ffffffff81161229>] ? proc_mkdir_data+0x49/0x70 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105769] [<ffffffffa0ca4270>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios] 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105776] [<ffffffffa0ca42de>] ? synobios_init+0x6e/0x490 [braswell_synobios] 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105782] [<ffffffffa0ca4270>] ? remove_card_detect_proc+0x20/0x20 [braswell_synobios] 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105789] [<ffffffff810003aa>] ? do_one_initcall+0xea/0x140 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105796] [<ffffffff81089a13>] ? load_module+0x1b93/0x2110 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105802] [<ffffffff810869a0>] ? store_uevent+0x40/0x40 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105809] [<ffffffff810f8799>] ? vfs_read+0xf9/0x160 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105813] [<ffffffff8108a0c0>] ? SYSC_finit_module+0x70/0x80 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105821] [<ffffffff814a6972>] ? system_call_fastpath+0x16/0x1b 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105857] Code: 56 41 55 44 8d 2e 41 54 55 53 e8 2b e0 fb ff 48 85 c0 4c 8d 20 0f 84 54 01 00 00 48 8b 98 08 05 00 00 48 85 db 0f 84 3d 01 00 00 <48> 8b 7b 10 48 8b ab 48 32 00 00 e8 0f bd 14 00 31 d2 31 ff 48 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105861] RIP [<ffffffff8135a1d1>] syno_ahci_disk_led_enable+0x31/0x180 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105863] RSP <ffff880063207cd8> 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105864] CR2: 0000000000000011 2018-06-27T21:28:47+02:00 Syno2 kernel: [ 39.105868] ---[ end trace 4975151b94ea8624 ]--- 2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth2], max LAN id is [1] 2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth5], max LAN id is [1] 2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth3], max LAN id is [1] 2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth4], max LAN id is [1] 2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth6], max LAN id is [1] 2018-06-27T21:28:47+02:00 Syno2 synochecknetworkcfg: synochecknetworkcfg.c:50 unlink [/etc/sysconfig/network-scripts/ifcfg-eth7], max LAN id is [1] 2018-06-27T21:28:47+02:00 Syno2 interface-catcher: eth0 (dhcp) is added 2018-06-27T21:28:48+02:00 Syno2 interface-catcher: lo (inet 127.0.0.1 netmask 255.0.0.0 ) is added 2018-06-27T21:28:49+02:00 Syno2 dhcp-client: started on eth0 2018-06-27T21:28:50+02:00 Syno2 [ 42.685490] init: dhcp-client (eth0) main process (7834) killed by TERM signal 2018-06-27T21:28:50+02:00 Syno2 dhcp-client: stopped on eth0 2018-06-27T21:28:51+02:00 Syno2 dhcp-client: started on eth0 2018-06-27T21:28:52+02:00 Syno2 spacetool.shared: raid_allow_rmw_check.c:48 fopen failed: /usr/syno/etc/.rmw.md2 2018-06-27T21:28:52+02:00 Syno2 spacetool.shared: spacetool.c:3151 [Info] Activate all VG 2018-06-27T21:28:52+02:00 Syno2 spacetool.shared: spacetool.c:3205 space: [/dev/md2] 2018-06-27T21:28:53+02:00 Syno2 spacetool.shared: spacetool.c:3231 space: [/dev/md2], ndisk: [1] 2018-06-27T21:28:53+02:00 Syno2 dhcp-client: stopped on eth0 2018-06-27T21:28:53+02:00 Syno2 [ 45.726041] init: dhcp-client (eth0) main process (8153) killed by TERM signal 2018-06-27T21:28:54+02:00 Syno2 dhcp-client: started on eth0 2018-06-27T21:28:54+02:00 Syno2 dhcp-client6: started on eth0 with action=client 2018-06-27T21:28:55+02:00 Syno2 spacetool.shared: hotspare_repair_config_set.c:37 synostoraged is offline, skip sending SIGHUP 2018-06-27T21:28:55+02:00 Syno2 synovspace: virtual_space_conf_check.c:78 [INFO] "PASS" checking configuration of virtual space [FCACHE], app: [1] 2018-06-27T21:28:55+02:00 Syno2 synovspace: virtual_space_conf_check.c:74 [INFO] No implementation, skip checking configuration of virtual space [HA] 2018-06-27T21:28:55+02:00 Syno2 synovspace: virtual_space_conf_check.c:74 [INFO] No implementation, skip checking configuration of virtual space [SNAPSHOT_ORG] 2018-06-27T21:28:55+02:00 Syno2 synovspace: vspace_wrapper_load_all.c:76 [INFO] No virtual layer above space: [/volume1] / [/dev/md2] 2018-06-27T21:28:57+02:00 Syno2 dhcp-client: eth0 get new IP 192.168.1.145/24 2018-06-27T21:28:57+02:00 Syno2 kernel: [ 49.132985] BTRFS: has skinny extents 2018-06-27T21:29:00+02:00 Syno2 dhclient: eth0 emit network ready event 2018-06-27T21:29:02+02:00 Syno2 configupdate: libconfigupdate.c:156 Original info before upgrade, dsmversion: 15284, smallfixnumber: 0, event: volume_ready, type: migrate 2018-06-27T21:29:02+02:00 Syno2 synocheckhotspare: synocheckhotspare.c:150 [INFO] No hotspare config, skip hotspare config check. [0x2000 virtual_space_layer_get.c:97] 2018-06-27T21:29:05+02:00 Syno2 configupdate: libconfigupdate.c:156 Original info before upgrade, dsmversion: 15284, smallfixnumber: 0, event: share_ready, type: migrate 2018-06-27T21:29:05+02:00 Syno2 synobackupd: (10289) [err] command_server.cpp:341 add watch to [/usr/local/share/synobackup] failed 2018-06-27T21:29:05+02:00 Syno2 synousbdisk: RCClean succeeded 2018-06-27T21:29:06+02:00 Syno2 syno_hdd_util: Model:[HTS725032A7E630], Firmware:[GHBOA470], S/N:[TF0400Y11RJS9J] in [/dev/sdb] is not ssd 2018-06-27T21:29:07+02:00 Syno2 hotplugd: hotplugd.c:1345 ##### ACTION:add 2018-06-27T21:29:07+02:00 Syno2 hotplugd: DEVNAME:sdb 2018-06-27T21:29:07+02:00 Syno2 hotplugd: DEVGUID:TF0400Y11RJS9J0 2018-06-27T21:29:07+02:00 Syno2 hotplugd: DEVPATH:sdb 2018-06-27T21:29:07+02:00 Syno2 hotplugd: SUBSYSTEM:block 2018-06-27T21:29:07+02:00 Syno2 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:13.0/ata2/host1/target1:0:0/1:0:0:0 2018-06-27T21:29:07+02:00 Syno2 hotplugd: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client. 2018-06-27T21:29:07+02:00 Syno2 hotplugd: hotplugd.c:1444 ==== SATA disk [sdb] hotswap [add] ==== 2018-06-27T21:29:08+02:00 Syno2 hotplugd: disk/disk_config_single.c:234 apply /usr/syno/bin/DiskApmSet.sh 255 /dev/sdb 1>/dev/null 2>&1 2018-06-27T21:29:09+02:00 Syno2 hotplugd: disk/disk_config_single.c:234 apply /usr/syno/bin/syno_disk_ctl --ncq-on /dev/sdb 1>/dev/null 2>&1 2018-06-27T21:29:09+02:00 Syno2 kernel: [ 57.896185] Get empty minor:104 2018-06-27T21:29:09+02:00 Syno2 hotplugd: hotplugd.c:1465 ==== SATA disk [sdb] Model: [HTS725032A7E630 ] ==== 2018-06-27T21:29:09+02:00 Syno2 hotplugd: hotplugd.c:1466 ==== SATA disk [sdb] Serial number: [TF0400Y11RJS9J] ==== 2018-06-27T21:29:09+02:00 Syno2 hotplugd: hotplugd.c:1467 ==== SATA disk [sdb] Firmware version: [GHBOA470] ==== 2018-06-27T21:29:12+02:00 Syno2 root: mkcert: Verifying certificate in [/usr/syno/etc/certificate/system/default]. 2018-06-27T21:29:14+02:00 Syno2 synoiscsiep: iscsi_start_all.cpp:101 Successfully started iSCSI service. 2018-06-27T21:29:16+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:29:21+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:29:24+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:29:39+02:00 Syno2 pingpong.cgi: SYSTEM: Last message 'scemd_connector/scem' repeated 7 times, suppressed by syslog-ng on Syno2 2018-06-27T21:29:39+02:00 Syno2 serv-bootup-timeout.sh: all service finish boot up. 2018-06-27T21:29:40+02:00 Syno2 synopkghelper: resource_api.cpp:288 Update feasibility-config for SynoFinder 2018-06-27T21:29:41+02:00 Syno2 syno-pkg-upgrade.sh: upgrade package: /.SynoUpgradePackages/FileStation-x86_64-1.1.4-0123.spk 2018-06-27T21:29:41+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:29:44+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:29:47+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:02+02:00 Syno2 pingpong.cgi: SYSTEM: Last message 'scemd_connector/scem' repeated 6 times, suppressed by syslog-ng on Syno2 2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release csp-rule for FileStation when 0x0002 (done) 2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release web-config for FileStation when 0x0002 (done) 2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release webapi-desc for FileStation when 0x0002 (done) 2018-06-27T21:30:02+02:00 Syno2 synopkg: resource_api.cpp:231 Release webapi-desc for FileStation when 0x0002 (done) 2018-06-27T21:30:03+02:00 Syno2 synopkg: SYSTEM: Last message 'resource_api.cpp:231' repeated 1 times, suppressed by syslog-ng on Syno2 2018-06-27T21:30:03+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release indexdb for FileStation when 0x0002 (done) 2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release web-config for FileStation when 0x0002 (done) 2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release userdata-collector for FileStation when 0x0002 (done) 2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release service-cfg for FileStation when 0x0002 (done) 2018-06-27T21:30:03+02:00 Syno2 synopkg: resource_api.cpp:231 Release sdk-plugin for FileStation when 0x0002 (done) 2018-06-27T21:30:06+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:07+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire sdk-plugin for FileStation when 0x0002 (done) 2018-06-27T21:30:08+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:12+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:14+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:24+02:00 Syno2 pingpong.cgi: SYSTEM: Last message 'scemd_connector/scem' repeated 5 times, suppressed by syslog-ng on Syno2 2018-06-27T21:30:24+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire service-cfg for FileStation when 0x0002 (done) 2018-06-27T21:30:24+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire userdata-collector for FileStation when 0x0002 (done) 2018-06-27T21:30:24+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire web-config for FileStation when 0x0002 (done) 2018-06-27T21:30:25+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire indexdb for FileStation when 0x0002 (done) 2018-06-27T21:30:25+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire csp-rule for FileStation when 0x0002 (done) 2018-06-27T21:30:27+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:28+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for FileStation when 0x0002 (done) 2018-06-27T21:30:28+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for FileStation when 0x0002 (done) 2018-06-27T21:30:28+02:00 Syno2 synopkgctl: SYSTEM: Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on Syno2 2018-06-27T21:30:28+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire web-config for FileStation when 0x0002 (done) 2018-06-27T21:30:28+02:00 Syno2 thumbd: dispatcher.cpp:21 (11966, 0) start dispatcher thread 2018-06-27T21:30:28+02:00 Syno2 thumbd: worker_pool.cpp:78 (11966, 0) start worker pool 2018-06-27T21:30:28+02:00 Syno2 thumbd: pool_monitor.cpp:91 (11966, 0) start pool monitor 2018-06-27T21:30:29+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:33+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:35+02:00 Syno2 pingpong.cgi: SYSTEM: Last message 'scemd_connector/scem' repeated 1 times, suppressed by syslog-ng on Syno2 2018-06-27T21:30:35+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire indexdb for FileStation when 0x0008 (done) 2018-06-27T21:30:35+02:00 Syno2 synopkg: resource_api.cpp:163 Acquire csp-rule for FileStation when 0x0008 (done) 2018-06-27T21:30:36+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:38+02:00 Syno2 syno-pkg-upgrade.sh: upgrade package: /.SynoUpgradePackages/SynologyUniversalSearch-x86_64-1.0.11-0167.spk 2018-06-27T21:30:39+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:42+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:200 System isn't ready, so cannot get scemd status. 2018-06-27T21:30:42+02:00 Syno2 pingpong.cgi: SYSTEM: Last message 'scemd_connector/scem' repeated 1 times, suppressed by syslog-ng on Syno2 2018-06-27T21:30:42+02:00 Syno2 synopkg: pkginstall.cpp:902 Can't downgrade SynoFinder 2018-06-27T21:30:42+02:00 Syno2 synopkg: pkginstall.cpp:311 Failed to install package: /.SynoUpgradePackages/SynologyUniversalSearch-x86_64-1.0.11-0167.spk, [267] 2018-06-27T21:30:44+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SynoFinder when 0x0000 (done) 2018-06-27T21:30:44+02:00 Syno2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SynoFinder when 0x0000 (done) 2018-06-27T21:30:45+02:00 Syno2 synopkgctl: SYSTEM: Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on Syno2 2018-06-27T21:30:45+02:00 Syno2 root: == DSM 6.1 15284-0 finished boot up == 2018-06-27T21:30:46+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client. 2018-06-27T21:30:46+02:00 Syno2 pingpong.cgi: scemd_connector/scemd_connector.c:209 Fail to SYNOScemdConnectorClient() for scemd conncetor client 2018-06-27T21:30:47+02:00 Syno2 index.cgi: external/external_microp_id_check.c:56 Fail to open synobios 2018-06-27T21:30:47+02:00 Syno2 root: platform error 2018-06-27T21:30:47+02:00 Syno2 index.cgi: feasibility_check.cpp:76 FeasibilityCheck: [Err] Failed to CheckConfEnum. 2018-06-27T21:30:48+02:00 Syno2 manutild: manutild.c:2961 not factory enviroment, finish manutild 2018-06-27T21:30:49+02:00 Syno2 updater: utils.cpp:325 Run SUS available updates 2018-06-27T21:31:04+02:00 Syno2 index.cgi: feasibility_check.cpp:76 FeasibilityCheck: [Err] Failed to CheckConfEnum. 2018-06-27T21:31:04+02:00 Syno2 index.cgi: system_sys_init.c:90 synopoweroff: System is going to poweroff 2018-06-27T21:32:04+02:00 Syno2 [ 233.653136] init: synonetd main process (5557) killed by TERM signal 2018-06-27T21:32:04+02:00 Syno2 [ 233.657639] init: synostoraged main process (9984) terminated with status 15 2018-06-27T21:32:09+02:00 Syno2 kernel: [ 239.077003] [sched_delayed] sched: RT throttling activated 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13437] /devices/virtual/block/loop1 timeout; kill it 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1703 '/devices/virtual/block/loop1' killed 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13449] /devices/virtual/block/loop0 timeout; kill it 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1701 '/devices/virtual/block/loop0' killed 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13450] /devices/virtual/block/loop7 timeout; kill it 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1715 '/devices/virtual/block/loop7' killed 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13457] /devices/virtual/block/loop2 timeout; kill it 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1705 '/devices/virtual/block/loop2' killed 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13458] /devices/virtual/block/loop3 timeout; kill it 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: seq 1707 '/devices/virtual/block/loop3' killed 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13460] /devices/virtual/block/loop4 timeout; kill it 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13437] terminated by signal 9 (Killed) 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13449] terminated by signal 9 (Killed) 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13450] terminated by signal 9 (Killed) 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13457] terminated by signal 9 (Killed) 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13458] terminated by signal 9 (Killed) 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13460] terminated by signal 9 (Killed) 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13463] terminated by signal 9 (Killed) 2018-06-27T21:32:40+02:00 Syno2 udevd[5794]: worker [13465] terminated by signal 9 (Killed) 2018-06-27T21:33:10+02:00 Syno2 syno_poweroff_task: System is acting poweroff. 2018-06-27T21:33:10+02:00 Syno2 [ 299.271733] init: hotplugd main process (10346) killed by TERM signal 2018-06-27T21:33:10+02:00 Syno2 [ 299.355306] init: smbd main process (11534) killed by TERM signal 2018-06-27T21:33:10+02:00 Syno2 [ 299.600171] init: synortc main process (13384) terminated with status 255 Die 916 würde ich wg. Hardware-Transcoding bevorzugen. Kann ich da noch was machen?