Eizo
-
Posts
8 -
Joined
-
Last visited
Posts posted by Eizo
-
-
14 minutes ago, sbv3000 said:
have you set mac1 and mac2 addresses for both adapters?
Yes, I entered the addresses for both NICs.
The grub.cfg contains this:
set vid=0x1111 set pid=0x1111 set sn=1111NZN111111 set mac1=001111111111 set mac2=002222222222 set rootdev=/dev/md0 set netif_num=2 set extra_args_918=''
-
Ich habe ein ASRock J4205-ITX. Läuft traumhaft unter 6.1 als 916, möchte gern die Netzwerkgeschwindigkeit erhöhen und nicht auf den Hardwareencoder verzichten, deshalb habe ich mir eine 5GbE zugelegt (auf das Board passt keine 10GbE) und versuche jetzt 6.2 als 918+ zum laufen zu bekommen.
Mit dem Loader 1.03a2 klappt das auch problemlos, sobald ich aber die Original-extra.lzma austausche, bootet die NAS zwar, wird aber nicht mehr im LAN gefunden. (taucht nicht im Router auf)
Switche ich wieder auf die original extra.lzma, bootet die NAS und bekommt auch eine IP.
Ich verwende diese Extras (welche leider nicht funktionieren): https://xpenology.com/forum/topic/12859-driver-extension-jun-103a2dsm62x-for-ds918/
Hat jemand ein ähnliches Board mit einer anderen "extra.lzma" am laufen? Vielleicht eine funktionierende Konfiguration als Image?
-
On 9/6/2018 at 10:48 PM, IG-88 said:
i already did a 4.9 test version for the 3615 with a newer version of the aquantia driver
so if you cant wait or just want to test you can install 3615 loader and image
when i have enough time this weekend i can compile with the newer driver from your link for dsm 6.1/loader 1.02 for all three versions, should be a smaller task to do it and release a new version (at least much smaller then doing 1.03/dsm 6.2 for 3615/3617)
I have now tried version 1.03a2 and DS918+ -> boots and is found in the LAN.
However, if I try an extra.lzma (version 0.2-0.5_test), the NAS will boot normally, but will not be found in my LAN.If I change the extra.lzma on the stick to its original lzma - everyting works fine (unfortunately the second network card is not recognized), but as soon as I use another lzma, nothing appears in my LAN anymore. Is there anything to consider?
My NIC is a Realtek RTL8111GR on ASRock J4205
-
Sounds great to me.
I can wait because I'm too stupid to compile for myself. 😑
-
Hi,
i use a brand-new Aquantia AQN-108 (5Gbit) in my NAS. Loader is jun's 1.02b + extra.lzma 4.8 - DS916+ (ASRock J4205)
No matter what I do, I just can't get the network card to work. Neither original-extra.lzma nor the 4.8-version work with the network card.
Maybe there are new drivers ? https://s3-us-west-1.amazonaws.com/aquantia-staging/wp-content/uploads/2018/07/20180706_Linux_2.0.15.0.zip
lspci -k | grep 'Kernel driver' Kernel driver in use: ahci Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: pcieport Kernel driver in use: xhci_hcd Kernel driver in use: r8168 Kernel driver in use: ahci
Spoiler0000:00:00.0 Class 0600: Device 8086:5af0 (rev 0b)
Subsystem: Device 1849:5af0
0000:00:02.0 Class 0300: Device 8086:5a84 (rev 0b)
Subsystem: Device 1849:5a84
0000:00:0f.0 Class 0780: Device 8086:5a9a (rev 0b)
Subsystem: Device 1849:5a9a
0000:00:12.0 Class 0106: Device 8086:5ae3 (rev 0b)
Subsystem: Device 1849:5ae3
Kernel driver in use: ahci
0000:00:13.0 Class 0604: Device 8086:5ad8 (rev fb)
Kernel driver in use: pcieport
0000:00:13.1 Class 0604: Device 8086:5ad9 (rev fb)
Kernel driver in use: pcieport
0000:00:13.2 Class 0604: Device 8086:5ada (rev fb)
Kernel driver in use: pcieport
0000:00:13.3 Class 0604: Device 8086:5adb (rev fb)
Kernel driver in use: pcieport
0000:00:15.0 Class 0c03: Device 8086:5aa8 (rev 0b)
Subsystem: Device 1849:5aa8
Kernel driver in use: xhci_hcd
0000:00:1f.0 Class 0601: Device 8086:5ae8 (rev 0b)
Subsystem: Device 1849:5ae8
0000:00:1f.1 Class 0c05: Device 8086:5ad4 (rev 0b)
Subsystem: Device 1849:5ad4
0000:01:00.0 Class 0200: Device 10ec:8168 (rev 11)
Subsystem: Device 1849:8168
Kernel driver in use: r8168
0000:03:00.0 Class 0106: Device 1b21:0612 (rev 02)
Subsystem: Device 1849:0612
Kernel driver in use: ahci
0000:04:00.0 Class 0200: Device 1d6a:d108 (rev 02)
Subsystem: Device 1d6a:0001
0001:00:02.0 Class 0000: Device 8086:22b1 (rev ff)
0001:00:14.0 Class 0000: Device 8086:22b5 (rev ff)
0001:00:1c.0 Class 0000: Device 8086:22c8 (rev ff)
0001:00:1c.1 Class 0000: Device 8086:22ca (rev ff)
0001:00:1f.3 Class 0000: Device 8086:2292 (rev ff)
0001:01:00.0 Class 0000: Device 8086:1539 (rev ff)
0001:02:00.0 Class 0000: Device 8086:1539 (rev ff)
0001:03:00.0 Class 0000: Device 1b4b:9215 (rev ff)
0001:04:00.0 Class 0000: Device 1b6f:7023 (rev ff)The Aquantia is Device: 1d6a:d108
I would be very grateful for any kind of help.
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.6-15266
- Loader version and model: JUN'S LOADER v1.02b - DS916+
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - ASRock J4205
- Additional comments: NO REBOOT REQUIRED
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.5
- Loader version and model: JUN'S LOADER v1.02b - DS916+
- Using custom extra.lzma: NO
- Installation type: ASRock J4205
- Additional comments: REBOOT REQUIRED
- 1
Driver extension jun 1.02b/DSM6.1.x for 3615xs / 3617xs / 916+
in Additional Compiled Modules
Posted
This is a example, dont want to post my real Mac.