Thanks for help!!!!
logs
insmod: ERROR: could not insert module /lib/modules/update/mvsas.ko: File exists
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.102 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15217 SMP Fri Nov 10 20:08:59 CST 2017
[ 0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=1 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1430LWN009938 mac1=106F3F0378F4 mac2=106F3F0378F5 mac3=106F3F0378F6 mac4=106F3F0378F7 netif_num=4 vid=0x13FE pid=0x1F00
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bcd6ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bcd70000-0x00000000bcdb8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcdb9000-0x00000000bcdc0fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bcdc1000-0x00000000bcde8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bcde9000-0x00000000bcdeafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bcdeb000-0x00000000bcdfbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bcdfc000-0x00000000bce09fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bce0a000-0x00000000bce30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bce31000-0x00000000bce73fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bce74000-0x00000000bcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd800000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: USI Kiri/Kiri, BIOS Kiri 3.00 07/26/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BD800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 13FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcd40-0x000fcd4f] mapped at [ffff8800000fcd40]
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01ab6000, 0x01ab6fff] PGTABLE
[ 0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE
[ 0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fc00000-0x13fdfffff]
[ 0.000000] [mem 0x13fc00000-0x13fdfffff] page 2M
[ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fbfffff]
[ 0.000000] [mem 0x13c000000-0x13fbfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbcd6ffff]
[ 0.000000] [mem 0x40200000-0xbcbfffff] page 2M
[ 0.000000] [mem 0xbcc00000-0xbcd6ffff] page 4k
[ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE
[ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbcde9000-0xbcdeafff]
[ 0.000000] [mem 0xbcde9000-0xbcdeafff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbce74000-0xbcffffff]
[ 0.000000] [mem 0xbce74000-0xbcffffff] page 4k
[ 0.000000] RAMDISK: [mem 0x364d4000-0x37261fff]
[ 0.000000] ACPI: RSDP 0x00000000000F0450 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BCDB9068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BCDBFC90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BCDB9150 06B3E (v02 ALASKA A M I 00000300 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BCE01F80 00040
[ 0.000000] ACPI: APIC 0x00000000BCDBFD88 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BCDBFE00 00102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000BCDBFF08 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BCDBFF48 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000BCDBFF80 000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b400000-ffff88013ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fdfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009bfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xbcd6ffff]
[ 0.000000] node 0: [mem 0xbcde9000-0xbcdeafff]
[ 0.000000] node 0: [mem 0xbce74000-0xbcffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fdfffff]
[ 0.000000] On node 0 totalpages: 1034393
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 155 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10511 pages used for memmap
[ 0.000000] DMA32 zone: 768766 pages, LIFO batch:31
[ 0.000000] Normal zone: 3577 pages used for memmap
[ 0.000000] Normal zone: 261632 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000bcd70000 - 00000000bcdb9000
[ 0.000000] PM: Registered nosave memory: 00000000bcdb9000 - 00000000bcdc1000
[ 0.000000] PM: Registered nosave memory: 00000000bcdc1000 - 00000000bcde9000
[ 0.000000] PM: Registered nosave memory: 00000000bcdeb000 - 00000000bcdfc000
[ 0.000000] PM: Registered nosave memory: 00000000bcdfc000 - 00000000bce0a000
[ 0.000000] PM: Registered nosave memory: 00000000bce0a000 - 00000000bce31000
[ 0.000000] PM: Registered nosave memory: 00000000bce31000 - 00000000bce74000
[ 0.000000] PM: Registered nosave memory: 00000000bd000000 - 00000000bd800000
[ 0.000000] PM: Registered nosave memory: 00000000bd800000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff88013fa00000 s69376 r8192 d20736 u524288
[ 0.000000] pcpu-alloc: s69376 r8192 d20736 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1020094
[ 0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=1 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1430LWN009938 mac1=106F3F0378F4 mac2=106F3F0378F5 mac3=106F3F0378F6 mac4=106F3F0378F7 netif_num=4 vid=0x13FE pid=0x1F00
[ 0.000000] Power on seq num: 0
[ 0.000000] Synology Hardware Version: DS3615xs-j
[ 0.000000] Vender format version: 2
[ 0.000000] Serial Number: 1430LWN009938
[ 0.000000] Mac1: 106F3F0378F4
[ 0.000000] Mac2: 106F3F0378F5
[ 0.000000] Mac3: 106F3F0378F6
[ 0.000000] Mac4: 106F3F0378F7
[ 0.000000] Internal netif num: 4
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Memory: 3982064k/5240832k available (4812k kernel code, 1103260k absent, 155508k reserved, 3794k data, 760k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 3093.044 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.08 BogoMIPS (lpj=3093044)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000033] Security Framework initialized
[ 0.000038] AppArmor: AppArmor initialized
[ 0.000044] Mount-cache hash table entries: 256
[ 0.000161] Initializing cgroup subsys memory
[ 0.000168] Initializing cgroup subsys devices
[ 0.000170] Initializing cgroup subsys freezer
[ 0.000171] Initializing cgroup subsys blkio
[ 0.000189] CPU: Physical Processor ID: 0
[ 0.000190] CPU: Processor Core ID: 0
[ 0.000193] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000195] mce: CPU supports 9 MCE banks
[ 0.000205] CPU0: Thermal monitoring enabled (TM1)
[ 0.000212] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
[ 0.000282] Freeing SMP alternatives: 24k freed
[ 0.000286] ACPI: Core revision 20130328
[ 0.001817] ACPI: All ACPI Tables successfully acquired
[ 0.002406] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.012407] smpboot: CPU0: Intel(R) Xeon(R) CPU E31225 @ 3.10GHz (fam: 06, model: 2a, stepping: 07)
[ 0.012412] TSC deadline timer enabled
[ 0.012418] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.012423] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.012425] ... version: 3
[ 0.012426] ... bit width: 48
[ 0.012426] ... generic registers: 8
[ 0.012427] ... value mask: 0000ffffffffffff
[ 0.012428] ... max period: 000000007fffffff
[ 0.012429] ... fixed-purpose events: 3
[ 0.012429] ... event mask: 00000007000000ff
[ 0.012569] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.052392] Brought up 4 CPUs
[ 0.052395] smpboot: Total of 4 processors activated (24744.35 BogoMIPS)
[ 0.054538] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.054685] devtmpfs: initialized
[ 0.054857] PM: Registering ACPI NVS region [mem 0xbcd70000-0xbcdb8fff] (299008 bytes)
[ 0.054862] PM: Registering ACPI NVS region [mem 0xbcdfc000-0xbce09fff] (57344 bytes)
[ 0.054863] PM: Registering ACPI NVS region [mem 0xbce31000-0xbce73fff] (274432 bytes)
[ 0.054936] xor: automatically using best checksumming function:
[ 0.064506] avx : 22204.000 MB/sec
[ 0.064537] NET: Registered protocol family 16
[ 0.064785] ACPI: bus type PCI registered
[ 0.064855] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.064857] PCI: not using MMCONFIG
[ 0.064858] PCI: Using configuration type 1 for base access
[ 0.067135] bio: create slab <bio-0> at 0
[ 0.083519] raid6: sse2x1 gen() 8347 MB/s
[ 0.100524] raid6: sse2x1 xor() 6583 MB/s
[ 0.117530] raid6: sse2x2 gen() 10425 MB/s
[ 0.134536] raid6: sse2x2 xor() 7488 MB/s
[ 0.151544] raid6: sse2x4 gen() 11996 MB/s
[ 0.168550] raid6: sse2x4 xor() 8798 MB/s
[ 0.168551] raid6: using algorithm sse2x4 gen() (11996 MB/s)
[ 0.168552] raid6: .... xor() 8798 MB/s, rmw enabled
[ 0.168553] raid6: using ssse3x2 recovery algorithm
[ 0.168568] ACPI: Added _OSI(Module Device)
[ 0.168569] ACPI: Added _OSI(Processor Device)
[ 0.168570] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.168571] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.169149] ACPI: EC: Look up EC in DSDT
[ 0.169836] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.171326] ACPI: SSDT 0x00000000BCE00918 003E0 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.171500] ACPI: Dynamic OEM Table Load:
[ 0.171502] ACPI: SSDT 0x0000000000000000 003E0 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.171520] ACPI: SSDT 0x00000000BCDFFD98 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.171662] ACPI: Dynamic OEM Table Load:
[ 0.171663] ACPI: SSDT 0x0000000000000000 000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.171998] ACPI: Interpreter enabled
[ 0.172005] ACPI: (supports S0 S4 S5)
[ 0.172006] ACPI: Using IOAPIC for interrupt routing
[ 0.172020] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172056] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.172228] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.172283] ACPI: No dock devices found.
[ 0.172477] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.176391] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.176628] PCI host bridge to bus 0000:00
[ 0.176630] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.176632] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.176633] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.176634] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.176635] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff]
[ 0.176637] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.176638] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.176639] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xffffffff]
[ 0.176646] pci 0000:00:00.0: [8086:0108] type 00 class 0x060000
[ 0.176713] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.176737] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.176762] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.176790] pci 0000:00:01.1: [8086:0105] type 01 class 0x060400
[ 0.176812] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.176837] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.176868] pci 0000:00:02.0: [8086:010a] type 00 class 0x030000
[ 0.176876] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
[ 0.176881] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.176884] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f]
[ 0.176967] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.176988] pci 0000:00:16.0: reg 10: [mem 0xfbe08000-0xfbe0800f 64bit]
[ 0.177059] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.177128] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.177148] pci 0000:00:1a.0: reg 10: [mem 0xfbe07000-0xfbe073ff]
[ 0.177232] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.177264] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.177299] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.177313] pci 0000:00:1b.0: reg 10: [mem 0xfbe00000-0xfbe03fff 64bit]
[ 0.177376] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.177435] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.177507] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.177541] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.177579] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.177651] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.177685] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.177717] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
[ 0.177790] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.177823] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.177856] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.177927] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.177961] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.177993] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.178065] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.178100] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.178136] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.178155] pci 0000:00:1d.0: reg 10: [mem 0xfbe06000-0xfbe063ff]
[ 0.178239] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.178271] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.178301] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.178369] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.178401] pci 0000:00:1f.0: [8086:1c56] type 00 class 0x060100
[ 0.178556] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.178573] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7]
[ 0.178580] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3]
[ 0.178587] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097]
[ 0.178594] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083]
[ 0.178601] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f]
[ 0.178609] pci 0000:00:1f.2: reg 24: [mem 0xfbe05000-0xfbe057ff]
[ 0.178650] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.178750] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.178764] pci 0000:00:1f.3: reg 10: [mem 0xfbe04000-0xfbe040ff 64bit]
[ 0.178783] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f]
[ 0.178876] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.178917] pci 0000:02:00.0: [1b4b:9485] type 00 class 0x010400
[ 0.178927] pci 0000:02:00.0: reg 10: [mem 0xfbd40000-0xfbd5ffff 64bit]
[ 0.178934] pci 0000:02:00.0: reg 18: [mem 0xfbd00000-0xfbd3ffff 64bit]
[ 0.178948] pci 0000:02:00.0: reg 30: [mem 0xfbd60000-0xfbd6ffff pref]
[ 0.178971] pci 0000:02:00.0: supports D1
[ 0.178972] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.181570] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.181576] pci 0000:00:01.1: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.181686] pci 0000:03:00.0: [1b4b:9125] type 00 class 0x010601
[ 0.181704] pci 0000:03:00.0: reg 10: [io 0xd040-0xd047]
[ 0.181716] pci 0000:03:00.0: reg 14: [io 0xd030-0xd033]
[ 0.181728] pci 0000:03:00.0: reg 18: [io 0xd020-0xd027]
[ 0.181740] pci 0000:03:00.0: reg 1c: [io 0xd010-0xd013]
[ 0.181752] pci 0000:03:00.0: reg 20: [io 0xd000-0xd00f]
[ 0.181765] pci 0000:03:00.0: reg 24: [mem 0xfbc10000-0xfbc107ff]
[ 0.181777] pci 0000:03:00.0: reg 30: [mem 0xfbc00000-0xfbc0ffff pref]
[ 0.181833] pci 0000:03:00.0: PME# supported from D3hot
[ 0.184572] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.184579] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.184584] pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.184704] pci 0000:04:00.0: [8086:10d3] type 00 class 0x020000
[ 0.184736] pci 0000:04:00.0: reg 10: [mem 0xfbb00000-0xfbb1ffff]
[ 0.184779] pci 0000:04:00.0: reg 18: [io 0xc000-0xc01f]
[ 0.184801] pci 0000:04:00.0: reg 1c: [mem 0xfbb20000-0xfbb23fff]
[ 0.184988] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.187579] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.187585] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.187591] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.187706] pci 0000:05:00.0: [8086:10d3] type 00 class 0x020000
[ 0.187738] pci 0000:05:00.0: reg 10: [mem 0xfba00000-0xfba1ffff]
[ 0.187781] pci 0000:05:00.0: reg 18: [io 0xb000-0xb01f]
[ 0.187803] pci 0000:05:00.0: reg 1c: [mem 0xfba20000-0xfba23fff]
[ 0.187988] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.190583] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.190589] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.190594] pci 0000:00:1c.5: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.190710] pci 0000:06:00.0: [8086:10d3] type 00 class 0x020000
[ 0.190741] pci 0000:06:00.0: reg 10: [mem 0xfb900000-0xfb91ffff]
[ 0.190784] pci 0000:06:00.0: reg 18: [io 0xa000-0xa01f]
[ 0.190806] pci 0000:06:00.0: reg 1c: [mem 0xfb920000-0xfb923fff]
[ 0.190991] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.193587] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.193592] pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
[ 0.193598] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.193714] pci 0000:07:00.0: [8086:10d3] type 00 class 0x020000
[ 0.193745] pci 0000:07:00.0: reg 10: [mem 0xfb800000-0xfb81ffff]
[ 0.193788] pci 0000:07:00.0: reg 18: [io 0x9000-0x901f]
[ 0.193810] pci 0000:07:00.0: reg 1c: [mem 0xfb820000-0xfb823fff]
[ 0.193995] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.196590] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.196595] pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
[ 0.196600] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff]
[ 0.196695] pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
[ 0.196704] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.196705] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.196706] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.196707] pci 0000:00:1e.0: bridge window [io 0x0d00-0xefff] (subtractive decode)
[ 0.196709] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.196710] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.196711] pci 0000:00:1e.0: bridge window [mem 0xbfa00000-0xffffffff] (subtractive decode)
[ 0.196740] pci_bus 0000:00: on NUMA node 0
[ 0.196801] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.196886] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.197122] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.197158] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.197193] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.197227] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.197262] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.197296] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.197330] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.197365] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.197434] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.197438] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.197462] Found 1 acpi root devices
[ 0.197550] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.197552] vgaarb: loaded
[ 0.197553] vgaarb: bridge control possible 0000:00:02.0
[ 0.197639] SCSI subsystem initialized
[ 0.197641] ACPI: bus type ATA registered
[ 0.197702] libata version 3.00 loaded.
[ 0.197761] pps_core: LinuxPPS API ver. 1 registered
[ 0.197762] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.197775] PTP clock support registered
[ 0.197825] PCI: Using ACPI for IRQ routing
[ 0.203660] PCI: pci_cache_line_size set to 64 bytes
[ 0.203726] e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
[ 0.203727] e820: reserve RAM buffer [mem 0xbcd70000-0xbfffffff]
[ 0.203729] e820: reserve RAM buffer [mem 0xbcdeb000-0xbfffffff]
[ 0.203730] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
[ 0.203731] e820: reserve RAM buffer [mem 0x13fe00000-0x13fffffff]
[ 0.203872] Switching to clocksource hpet
[ 0.203928] AppArmor: AppArmor Filesystem Enabled
[ 0.203954] pnp: PnP ACPI init
[ 0.203958] ACPI: bus type PNP registered
[ 0.204044] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.204046] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.204047] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.204049] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.204050] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.204052] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.204164] system 00:01: [io 0x0a00-0x0a1f] has been reserved
[ 0.204166] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.204215] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.204263] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.204377] pnp 00:04: [dma 0 disabled]
[ 0.204426] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.204433] pnp 00:05: [dma 4]
[ 0.204459] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.204492] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.204522] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.204571] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 0.204584] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.204629] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.204777] system 00:0a: [io 0x0400-0x0453] could not be reserved
[ 0.204779] system 00:0a: [io 0x0458-0x047f] has been reserved
[ 0.204780] system 00:0a: [io 0xf040-0xf05f] has been reserved
[ 0.204782] system 00:0a: [io 0x0500-0x057f] has been reserved
[ 0.204784] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.204785] system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.204787] system 00:0a: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.204788] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.204789] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.204850] system 00:0b: [io 0x0454-0x0457] has been reserved
[ 0.204851] system 00:0b: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.204950] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.205041] pnp: PnP ACPI: found 13 devices
[ 0.205041] ACPI: bus type PNP unregistered
[ 0.213072] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.213077] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 0.213079] pci 0000:00:01.1: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.213082] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.213085] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.213090] pci 0000:00:1c.0: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.213097] pci 0000:00:1c.4: PCI bridge to [bus 04]
[ 0.213100] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
[ 0.213105] pci 0000:00:1c.4: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.213112] pci 0000:00:1c.5: PCI bridge to [bus 05]
[ 0.213115] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff]
[ 0.213120] pci 0000:00:1c.5: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.213127] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.213130] pci 0000:00:1c.6: bridge window [io 0xa000-0xafff]
[ 0.213134] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.213142] pci 0000:00:1c.7: PCI bridge to [bus 07]
[ 0.213144] pci 0000:00:1c.7: bridge window [io 0x9000-0x9fff]
[ 0.213149] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff]
[ 0.213156] pci 0000:00:1e.0: PCI bridge to [bus 08]
[ 0.213403] pci 0000:00:1e.0: setting latency timer to 64
[ 0.213407] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.213408] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.213409] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.213411] pci_bus 0000:00: resource 7 [io 0x0d00-0xefff]
[ 0.213412] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.213413] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.213414] pci_bus 0000:00: resource 10 [mem 0xbfa00000-0xffffffff]
[ 0.213416] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.213417] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.213418] pci_bus 0000:03: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.213419] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 0.213421] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.213422] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 0.213423] pci_bus 0000:05: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.213424] pci_bus 0000:06: resource 0 [io 0xa000-0xafff]
[ 0.213425] pci_bus 0000:06: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.213426] pci_bus 0000:07: resource 0 [io 0x9000-0x9fff]
[ 0.213428] pci_bus 0000:07: resource 1 [mem 0xfb800000-0xfb8fffff]
[ 0.213429] pci_bus 0000:08: resource 4 [io 0x0000-0x03af]
[ 0.213430] pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7]
[ 0.213431] pci_bus 0000:08: resource 6 [io 0x03b0-0x03df]
[ 0.213432] pci_bus 0000:08: resource 7 [io 0x0d00-0xefff]
[ 0.213434] pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.213435] pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.213436] pci_bus 0000:08: resource 10 [mem 0xbfa00000-0xffffffff]
[ 0.213477] NET: Registered protocol family 2
[ 0.213610] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.213666] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.213721] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.213733] TCP: reno registered
[ 0.213736] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.213745] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.213789] NET: Registered protocol family 1
[ 0.213871] RPC: Registered named UNIX socket transport module.
[ 0.213872] RPC: Registered udp transport module.
[ 0.213873] RPC: Registered tcp transport module.
[ 0.213874] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.213894] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.213904] pci 0000:00:02.0: Boot video device
[ 0.455930] PCI: CLS 64 bytes, default 64
[ 0.455955] Trying to unpack rootfs image as initramfs...
[ 2.656719] Freeing initrd memory: 13880k freed
[ 2.667518] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.667522] software IO TLB [mem 0xb8d70000-0xbcd70000] (64MB) mapped at [ffff8800b8d70000-ffff8800bcd6ffff]
[ 2.673107] audit: initializing netlink socket (disabled)
[ 2.673117] type=2000 audit(1513290729.668:1): initialized
[ 2.677378] bounce pool size: 64 pages
[ 2.677816] VFS: Disk quotas dquot_6.5.2
[ 2.677832] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.678386] NFS: Registering the id_resolver key type
[ 2.678393] Key type id_resolver registered
[ 2.678394] Key type id_legacy registered
[ 2.678402] msgmni has been set to 7804
[ 2.678738] async_tx: api initialized (async)
[ 2.678810] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 2.678811] io scheduler noop registered
[ 2.678812] io scheduler deadline registered
[ 2.678818] io scheduler cfq registered (default)
[ 2.679027] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.679323] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[ 2.679867] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 2.680178] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 2.680564] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 2.680788] pcieport 0000:00:1c.6: irq 45 for MSI/MSI-X
[ 2.681971] pcieport 0000:00:1c.7: irq 46 for MSI/MSI-X
[ 2.927193] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.948111] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.948219] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[ 2.973803] brd: module loaded
[ 2.978012] Loading iSCSI transport class v2.0-870.
[ 2.987778] rdac: device handler registered
[ 2.989487] ahci 0000:00:1f.2: version 3.0
[ 2.989586] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 3.000309] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 3.000316] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 3.000323] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.017410] scsi0 : ahci
[ 3.019332] scsi1 : ahci
[ 3.019728] scsi2 : ahci
[ 3.020106] scsi3 : ahci
[ 3.020889] scsi4 : ahci
[ 3.023035] scsi5 : ahci
[ 3.023393] ata1: SATA max UDMA/133 abar m2048@0xfbe05000 port 0xfbe05100 irq 47
[ 3.023397] ata2: SATA max UDMA/133 abar m2048@0xfbe05000 port 0xfbe05180 irq 47
[ 3.023399] ata3: SATA max UDMA/133 abar m2048@0xfbe05000 port 0xfbe05200 irq 47
[ 3.023402] ata4: SATA max UDMA/133 abar m2048@0xfbe05000 port 0xfbe05280 irq 47
[ 3.023404] ata5: SATA max UDMA/133 abar m2048@0xfbe05000 port 0xfbe05300 irq 47
[ 3.023407] ata6: SATA max UDMA/133 abar m2048@0xfbe05000 port 0xfbe05380 irq 47
[ 3.023495] ahci 0000:03:00.0: irq 48 for MSI/MSI-X
[ 3.023553] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 3.023556] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 3.023562] ahci 0000:03:00.0: port 0 can do FBS, forcing FBSCP
[ 3.023589] ahci 0000:03:00.0: port 1 can do FBS, forcing FBSCP
[ 3.026080] scsi6 : ahci
[ 3.026610] scsi7 : ahci
[ 3.027770] ata7: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10100 irq 48
[ 3.027774] ata8: SATA max UDMA/133 abar m2048@0xfbc10000 port 0xfbc10180 irq 48
[ 3.031513] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 3.032603] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.032608] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.032995] rtc_cmos 00:06: RTC can wake from S4
[ 3.033584] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 3.033612] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.034318] i2c /dev entries driver
[ 3.035994] it87: Found IT8721F chip at 0xa00, revision 3
[ 3.038078] md: linear personality registered for level -1
[ 3.038081] md: raid0 personality registered for level 0
[ 3.038082] md: raid1 personality registered for level 1
[ 3.038083] md: raid10 personality registered for level 10
[ 3.038966] md: raid6 personality registered for level 6
[ 3.038968] md: raid5 personality registered for level 5
[ 3.038968] md: raid4 personality registered for level 4
[ 3.038969] md: raidF1 personality registered for level 45
[ 3.039191] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 3.039193] cpuidle: using governor ladder
[ 3.039194] cpuidle: using governor menu
[ 3.039251] TCP: cubic registered
[ 3.039279] NET: Registered protocol family 17
[ 3.039298] Key type dns_resolver registered
[ 3.328221] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.328247] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.328278] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.328298] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.330211] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.330233] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.331002] ata2.00: ATA-9: ST4000DM000-1F2168, CC54, max UDMA/133
[ 3.331010] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.331019] ata1.00: ATA-9: ST4000DM000-1F2168, CC54, max UDMA/133
[ 3.331022] ata1.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.331855] ata2.00: configured for UDMA/133
[ 3.331877] ata1.00: configured for UDMA/133
[ 3.360735] scsi 0:0:0:0: Direct-Access ATA ST4000DM000-1F2168 CC54 PQ: 0 ANSI: 5
[ 3.360999] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 3.361001] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.361036] sd 0:0:0:0: [sda] Write Protect is off
[ 3.361038] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.361053] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.361723] scsi 1:0:0:0: Direct-Access ATA ST4000DM000-1F2168 CC54 PQ: 0 ANSI: 5
[ 3.362909] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 3.362911] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 3.362947] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.362949] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.362964] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.420943] sda: sda1 sda2 sda3
[ 3.421352] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.427507] sdb: sdb1 sdb2 sdb3
[ 3.427936] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.487185] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 3.487214] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
[ 3.488593] ata7.00: ATA-10: ST4000DM000-2AE166, 0001, max UDMA/133
[ 3.488597] ata7.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.489687] ata7.00: configured for UDMA/133
[ 3.490597] scsi 6:0:0:0: Direct-Access ATA ST4000DM000-2AE166 0001 PQ: 0 ANSI: 5
[ 3.490855] sd 6:0:0:0: [sdg] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 3.490857] sd 6:0:0:0: [sdg] 4096-byte physical blocks
[ 3.490892] sd 6:0:0:0: [sdg] Write Protect is off
[ 3.490893] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 3.490909] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.499152] ata8.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
[ 3.499167] ata8.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.524350] ata8.00: configured for UDMA/133
[ 3.524366] ata8.00: Find SSD disks. [OCZ-VERTEX3]
[ 3.528248] scsi 7:0:0:0: Direct-Access OCZ VERTEX3 2.15 PQ: 0 ANSI: 5
[ 3.528489] sd 7:0:0:0: [sdh] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 3.528537] sd 7:0:0:0: [sdh] Write Protect is off
[ 3.528539] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 3.528554] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.528929] sdh: sdh1
[ 3.529719] sd 7:0:0:0: [sdh] Attached SCSI disk
[ 3.670135] tsc: Refined TSC clocksource calibration: 3092.972 MHz
[ 3.670141] Switching to clocksource tsc
[ 3.742002] sdg: sdg1 sdg2 sdg3
[ 3.742312] sd 6:0:0:0: [sdg] Attached SCSI disk
[ 3.742330] registered taskstats version 1
[ 3.743050] rtc_cmos 00:06: setting system clock to 2017-12-14 22:32:11 UTC (1513290731)
[ 3.743483] Freeing unused kernel memory: 760k freed
[ 3.743538] Write protecting the kernel read-only data: 8192k
[ 3.743626] Freeing unused kernel memory: 1320k freed
[ 3.744370] Freeing unused kernel memory: 500k freed
[ 3.777721] ACPI: bus type USB registered
[ 3.777806] usbcore: registered new interface driver usbfs
[ 3.777842] usbcore: registered new interface driver hub
[ 3.778428] usbcore: registered new interface driver ethub
[ 3.778781] usbcore: registered new device driver usb
[ 3.785148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.787774] ehci-pci: EHCI PCI platform driver
[ 3.787858] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 3.787867] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.787871] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.787883] ehci-pci 0000:00:1a.0: debug port 2
[ 3.791779] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.791795] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbe07000
[ 3.797102] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.797285] hub 1-0:1.0: USB hub found
[ 3.797290] hub 1-0:1.0: 2 ports detected
[ 3.797387] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 3.797392] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.797396] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.797406] ehci-pci 0000:00:1d.0: debug port 2
[ 3.801300] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.801315] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbe06000
[ 3.807096] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.807267] hub 2-0:1.0: USB hub found
[ 3.807271] hub 2-0:1.0: 2 ports detected
[ 3.810789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.814382] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.827698] usbcore: registered new interface driver usb-storage
[ 3.837656] VMware PVSCSI driver - version 1.0.2.0-k
[ 3.840369] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.843111] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.851416] Fusion MPT base driver 3.04.20
[ 3.851419] Copyright (c) 1999-2008 LSI Corporation
[ 3.856709] Fusion MPT SPI Host driver 3.04.20
[ 3.859480] Fusion MPT SAS Host driver 3.04.20
[ 3.862167] Fusion MPT misc device (ioctl) driver 3.04.20
[ 3.862254] mptctl: Registered with Fusion MPT base driver
[ 3.862256] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 3.867711] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[ 3.870785] mpt2sas version 20.00.00.00 loaded
[ 3.873776] mpt3sas version 01.100.01.00 loaded
[ 3.879426] Adaptec aacraid driver 1.2-0[30200]-ms
[ 3.882289] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 3.885027] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.887797] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 3.896076] RocketRAID 3xxx/4xxx Controller driver v1.8
[ 3.898929] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[ 3.909501] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[ 3.909504] Disabling lock debugging due to kernel taint
[ 3.909744] 2017-12-14 22:32:11 UTC
[ 3.909746] synobios: load, major number 201
[ 3.909748] Brand: Synology
[ 3.909749] Model: DS-3615xs
[ 3.909751] set group disks wakeup number to 4, spinup time deno 7
[ 4.120029] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 4.255354] Got empty serial number. Generate serial number from product.
[ 4.255649] hub 1-1:1.0: USB hub found
[ 4.255725] hub 1-1:1.0: 6 ports detected
[ 4.378971] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.409968] synobios cpu_arch proc entry initialized
[ 4.409973] synobios crypto_hw proc entry initialized
[ 4.409975] synobios syno_platform proc entry initialized
[ 4.415155] synobios: unload
[ 4.420254] md: Autodetecting RAID arrays.
[ 4.469690] md: invalid raid superblock magic on sda3
[ 4.474809] md: sda3 does not have a valid v0.90 superblock, not importing!
[ 4.514295] Got empty serial number. Generate serial number from product.
[ 4.514302] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[ 4.514593] hub 2-1:1.0: USB hub found
[ 4.514667] hub 2-1:1.0: 8 ports detected
[ 4.530080] md: invalid raid superblock magic on sdb3
[ 4.535163] md: sdb3 does not have a valid v0.90 superblock, not importing!
[ 4.599028] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 4.607415] md: invalid raid superblock magic on sdg3
[ 4.612526] md: sdg3 does not have a valid v0.90 superblock, not importing!
[ 4.614233] md: invalid raid superblock magic on sdh1
[ 4.619302] md: sdh1 does not have a valid v0.90 superblock, not importing!
[ 4.619305] md: Scanned 10 and added 6 devices.
[ 4.619306] md: autorun ...
[ 4.619307] md: considering sda1 ...
[ 4.619309] md: adding sda1 ...
[ 4.619311] md: sda2 has different UUID to sda1
[ 4.619313] md: adding sdb1 ...
[ 4.619314] md: sdb2 has different UUID to sda1
[ 4.619316] md: adding sdg1 ...
[ 4.619317] md: sdg2 has different UUID to sda1
[ 4.619321] md: created md0
[ 4.619323] md: bind<sdg1>
[ 4.619331] md: bind<sdb1>
[ 4.619335] md: bind<sda1>
[ 4.619340] md: running: <sda1><sdb1><sdg1>
[ 4.619435] md/raid1:md0: active with 3 out of 12 mirrors
[ 4.619448] md0: detected capacity change from 0 to 2549940224
[ 4.619491] md: considering sda2 ...
[ 4.619495] md: adding sda2 ...
[ 4.619497] md: adding sdb2 ...
[ 4.619498] md: adding sdg2 ...
[ 4.619631] md: created md1
[ 4.619632] md: bind<sdg2>
[ 4.619636] md: bind<sdb2>
[ 4.619644] md: bind<sda2>
[ 4.619649] md: running: <sda2><sdb2><sdg2>
[ 4.619732] md/raid1:md1: active with 3 out of 12 mirrors
[ 4.619740] md1: detected capacity change from 0 to 2147418112
[ 4.619850] md: ... autorun DONE.
[ 4.653800] md0: unknown partition table
[ 4.704303] usb-storage 1-1.2:1.0: USB Mass Storage device detected
[ 4.704336] scsi8 : usb-storage 1-1.2:1.0
[ 4.802985] usb 2-1.3: new low-speed USB device number 3 using ehci-pci
[ 4.901956] Got empty serial number. Generate serial number from product.
[ 4.987943] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[ 5.090661] Got empty serial number. Generate serial number from product.
[ 5.256521] EXT4-fs (md0): barriers disabled
[ 5.268331] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[ 5.707533] scsi 8:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 5.708280] sd 8:0:0:0: [synoboot] 7823360 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 5.708904] sd 8:0:0:0: [synoboot] Write Protect is off
[ 5.708907] sd 8:0:0:0: [synoboot] Mode Sense: 23 00 00 00
[ 5.709699] sd 8:0:0:0: [synoboot] No Caching mode page found
[ 5.715478] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[ 5.724903] sd 8:0:0:0: [synoboot] No Caching mode page found
[ 5.730663] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[ 5.745808] synoboot: synoboot1 synoboot2 synoboot3
[ 5.748143] sd 8:0:0:0: [synoboot] No Caching mode page found
[ 5.753903] sd 8:0:0:0: [synoboot] Assuming drive cache: write through
[ 5.760461] sd 8:0:0:0: [synoboot] Attached SCSI removable disk
[ 9.468468] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 11.171786] EXT4-fs (md0): re-mounted. Opts: (null)
[ 14.623059] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.623094] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 14.623124] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 14.623154] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 14.623184] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 14.926455] md1: unknown partition table
[ 15.083802] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 15.378177] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 15.378630] zram: Created 4 device(s) ...
[ 15.388232] Adding 600060k swap on /dev/zram0. Priority:1 extents:1 across:600060k SS
[ 15.393370] Adding 600060k swap on /dev/zram1. Priority:1 extents:1 across:600060k SS
[ 15.398435] Adding 600060k swap on /dev/zram2. Priority:1 extents:1 across:600060k SS
[ 15.403567] Adding 600060k swap on /dev/zram3. Priority:1 extents:1 across:600060k SS
[ 16.829349] NET: Registered protocol family 10
[ 16.853824] sit: IPv6 over IPv4 tunneling driver
[ 16.958296] init: syno-auth-check main process (5562) killed by TERM signal
[ 17.108628] ACPI: Requesting acpi_cpufreq
[ 17.108739] Monitor-Mwait will be used to enter C-1 state
[ 17.108746] Monitor-Mwait will be used to enter C-3 state
[ 17.108758] ACPI: acpi_idle registered with cpuidle
[ 17.540494] fuse init (API version 7.22)
[ 17.542894] dca service started, version 1.12.1
[ 17.545233] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI
[ 17.545235] e1000e: Copyright(c) 1999 - 2016 Intel Corporation.
[ 17.545420] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 17.545457] e1000e 0000:04:00.0: irq 49 for MSI/MSI-X
[ 17.649654] e1000e 0000:04:00.0 eth0: registered PHC clock
[ 17.649658] e1000e 0000:04:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 10:6f:3f:03:78:f4
[ 17.649659] e1000e 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection
[ 17.649744] e1000e 0000:04:00.0 eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 17.649905] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 17.649941] e1000e 0000:05:00.0: irq 50 for MSI/MSI-X
[ 17.754658] e1000e 0000:05:00.0 eth1: registered PHC clock
[ 17.754661] e1000e 0000:05:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 10:6f:3f:03:78:f5
[ 17.754663] e1000e 0000:05:00.0 eth1: Intel(R) PRO/1000 Network Connection
[ 17.754747] e1000e 0000:05:00.0 eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 17.754902] e1000e 0000:06:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 17.754937] e1000e 0000:06:00.0: irq 51 for MSI/MSI-X
[ 17.864880] e1000e 0000:06:00.0 eth2: registered PHC clock
[ 17.864884] e1000e 0000:06:00.0 eth2: (PCI Express:2.5GT/s:Width x1) 10:6f:3f:03:78:f6
[ 17.864885] e1000e 0000:06:00.0 eth2: Intel(R) PRO/1000 Network Connection
[ 17.864970] e1000e 0000:06:00.0 eth2: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 17.865153] e1000e 0000:07:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 17.865191] e1000e 0000:07:00.0: irq 52 for MSI/MSI-X
[ 17.975036] e1000e 0000:07:00.0 eth3: registered PHC clock
[ 17.975040] e1000e 0000:07:00.0 eth3: (PCI Express:2.5GT/s:Width x1) 10:6f:3f:03:78:f7
[ 17.975042] e1000e 0000:07:00.0 eth3: Intel(R) PRO/1000 Network Connection
[ 17.975126] e1000e 0000:07:00.0 eth3: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 18.070577] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3
[ 18.070580] Copyright (c) 2007-2015 Intel Corporation.
[ 18.075631] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.3.3
[ 18.075643] Copyright(c) 1999 - 2017 Intel Corporation.
[ 18.078179] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19
[ 18.078181] i40e: Copyright(c) 2013 - 2016 Intel Corporation.
[ 18.080747] tn40xx low_mem_msg proc entry initialized
[ 18.080750] tn40xx low_mem_counter proc entry initialized
[ 18.080751] tn40xx debug_msg proc entry initialized
[ 18.080752] tn40xx: Tehuti Network Driver, 0.3.6.12.3
[ 18.085358] Loading modules backported from Linux version v3.18.1-0-g39ca484
[ 18.085360] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[ 18.088032] Compat-mlnx-ofed backport release: cd30181
[ 18.088034] Backport based on mlnx_ofed/mlnx_rdma.git cd30181
[ 18.088035] compat.git: mlnx_ofed/mlnx_rdma.git
[ 18.109984] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $)
[ 18.339261] bio: create slab <bio-1> at 1
[ 18.339341] Btrfs loaded
[ 18.428465] exFAT: Version 1.2.9
[ 18.451375] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 18.455609] sky2: driver version 1.30
[ 18.460305] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[ 18.464769] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[ 18.469195] QLogic/NetXen Network Driver v4.0.80
[ 18.471652] Solarflare NET driver v3.2
[ 18.473840] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 18.473844] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 18.475912] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 18.477977] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[ 18.484582] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
[ 18.498696] usbcore: registered new interface driver ax88179_178a
[ 18.500820] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 18.500824] ACPI: Power Button [PWRB]
[ 18.500922] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 18.500926] ACPI: Power Button [PWRF]
[ 18.506547] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 18.506550] Copyright (c) 2007 Atheros Corporation.
[ 18.508776] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 18.508778] e100: Copyright(c) 1999-2006 Intel Corporation
[ 18.510884] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[ 18.510886] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 18.512988] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 18.512990] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 18.515250] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver - version 4.3.2
[ 18.515251] Copyright(c) 1999 - 2017 Intel Corporation.
[ 18.521809] usbcore: registered new interface driver rtl8150
[ 18.523992] usbcore: registered new interface driver r8152
[ 18.526090] usbcore: registered new interface driver cx82310_eth
[ 18.528278] usbcore: registered new interface driver asix
[ 18.530472] usbcore: registered new interface driver plusb
[ 18.535044] et131x: module is from the staging directory, the quality is unknown, you have been warned.
[ 18.578793] 2017-12-14 22:32:26 UTC
[ 18.578797] synobios: load, major number 201
[ 18.578799] Brand: Synology
[ 18.578801] Model: DS-3615xs
[ 18.578802] set group disks wakeup number to 4, spinup time deno 7
[ 18.993967] systemd-udevd[6390]: starting version 204
[ 19.078733] synobios cpu_arch proc entry initialized
[ 19.078738] synobios crypto_hw proc entry initialized
[ 19.078739] synobios syno_platform proc entry initialized
[ 19.645601] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 19.646361] bonding: bond0 is being deleted...
[ 19.646463] bonding: bond0: released all slaves
[ 19.659149] bonding: bond0 is being created...
[ 19.660429] bonding: bond0: setting mode to balance-alb (6).
[ 19.660466] bonding: bond0: Setting use_carrier to 1.
[ 19.660499] bonding: bond0: Setting MII monitoring interval to 100.
[ 19.660528] bonding: bond0: Setting up delay to 100.
[ 19.660939] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 19.663735] bonding: bond0: Adding slave eth0.
[ 19.739598] e1000e 0000:04:00.0: irq 49 for MSI/MSI-X
[ 19.840665] e1000e 0000:04:00.0: irq 49 for MSI/MSI-X
[ 19.841043] bonding: bond0: enslaving eth0 as an active interface with a down link.
[ 19.843998] bonding: bond0: Adding slave eth1.
[ 19.919738] e1000e 0000:05:00.0: irq 50 for MSI/MSI-X
[ 20.020615] e1000e 0000:05:00.0: irq 50 for MSI/MSI-X
[ 20.020976] bonding: bond0: enslaving eth1 as an active interface with a down link.
[ 20.289625] e1000e 0000:06:00.0: irq 51 for MSI/MSI-X
[ 20.390543] e1000e 0000:06:00.0: irq 51 for MSI/MSI-X
[ 20.391025] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 21.345478] e1000e 0000:07:00.0: irq 52 for MSI/MSI-X
[ 21.446285] e1000e 0000:07:00.0: irq 52 for MSI/MSI-X
[ 21.446770] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 22.228107] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 22.260045] bonding: bond0: link status up for interface eth1, enabling it in 0 ms.
[ 22.260049] bonding: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex.
[ 22.260052] bonding: bond0: making interface eth1 the new active one.
[ 22.260606] device eth1 entered promiscuous mode
[ 22.260621] bonding: bond0: first active interface up!
[ 22.260632] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 22.310089] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
[ 22.360000] bonding: bond0: link status up for interface eth0, enabling it in 100 ms.
[ 22.459996] bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex.
[ 22.486581] md: md2 stopped.
[ 22.487115] md: bind<sdh1>
[ 22.487512] md/raid0:md2: md_size is 117222144 sectors.
[ 22.487514] md: RAID0 configuration for md2 - 1 zone
[ 22.487515] md: zone0=[sdh1]
[ 22.487517] zone-offset= 0KB, device-offset= 0KB, size= 58611072KB
[ 22.487522] md2: detected capacity change from 0 to 60017737728
[ 22.487686] md2: unknown partition table
[ 22.487964] md: md4 stopped.
[ 22.795868] md: bind<sdb3>
[ 22.796034] md: bind<sdg3>
[ 22.796177] md: bind<sda3>
[ 22.796558] md/raid:md4: not clean -- starting background reconstruction
[ 22.796565] md/raid:md4: device sda3 operational as raid disk 0
[ 22.796566] md/raid:md4: device sdg3 operational as raid disk 2
[ 22.796567] md/raid:md4: device sdb3 operational as raid disk 1
[ 22.796851] md/raid:md4: allocated 3292kB
[ 22.796866] md/raid:md4: raid level 5 active with 3 out of 3 devices, algorithm 2
[ 22.796867] RAID conf printout:
[ 22.796868] --- level:5 rd:3 wd:3
[ 22.796869] disk 0, o:1, dev:sda3
[ 22.796870] disk 1, o:1, dev:sdb3
[ 22.796871] disk 2, o:1, dev:sdg3
[ 22.796897] md4: detected capacity change from 0 to 7991698522112
[ 22.797122] md4: unknown partition table
[ 22.797365] md: md4: current auto_remap = 0
[ 22.797368] md: md4: flushing inflight I/O
[ 22.800924] md: resync of RAID array md4
[ 22.800928] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 22.800929] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 22.800931] md: using 128k window, over a total of 3902196544k.
[ 22.800932] md: resuming resync of md4 from checkpoint.
[ 23.349853] bio: create slab <bio-2> at 2
[ 25.658962] flashcache: flashcache-1.0-2017-11-10-22:53 initialized
[ 25.672725] flashcache: flashcache-1.0-syno-v25-pin-file-2017-11-10-22:53-debug initialized
[ 25.695909] flashache: /dev/vg1/volume_1 exclude check success
[ 25.701771] flashache: /dev/md2 exclude check success
[ 25.706841] device-mapper: flashcache: Can handle failure in creation
[ 25.713282] device-mapper: flashcache: Allocate 23244KB (26B per) mem for 915456-entry cache(capacity:57216MB, associativity:512, block size:128 sectors(64KB))
[ 27.096180] BTRFS: device label 2017.12.14-15:23:54 v15217 devid 1 transid 293 /dev/mapper/cachedev_0
[ 27.096546] BTRFS info (device dm-2): disabling disk space caching
[ 27.096550] BTRFS: has skinny extents
[ 28.933608] loop: module loaded
[ 29.472901] iSCSI:target_core_rodsp_server.c:1017:rodsp_server_init RODSP server started, login_key(106f3f0378f5).
[ 29.478643] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized
[ 29.499344] iSCSI:target_core_device.c:571:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 29.499445] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[ 29.529076] iSCSI:target_core_file.c:92:fd_attach_hba RODSP plugin for fileio is enabled.
[ 29.529085] iSCSI:target_core_ep.c:862:ep_attach_hba RODSP plugin for epio is enabled.
[ 29.529088] iSCSI:target_core_ep.c:869:ep_attach_hba ODX Token Manager is enabled.
[ 29.807871] usbcore: registered new interface driver usblp
[ 29.862078] usbcore: registered new interface driver usbhid
[ 29.862081] usbhid: USB HID core driver
[ 29.956664] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input2
[ 29.956723] hid-generic 0003:0458:003A.0001: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 29.956814] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input3
[ 29.956877] hid-generic 0003:413C:2107.0002: input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:1d.0-1.6/input0
[ 32.181360] ata7.00: configured for UDMA/133
[ 32.181367] ata7: EH complete
[ 32.257836] device eth1 left promiscuous mode
[ 33.154503] init: iscsi_pluginengined main process (12373) terminated with status 255
[ 33.154539] init: iscsi_pluginengined main process ended, respawning
[ 34.894580] ata8.00: configured for UDMA/133
[ 34.894588] ata8: EH complete
[ 34.961942] ata1.00: configured for UDMA/133
[ 34.961950] ata1: EH complete
[ 35.531767] ata2.00: configured for UDMA/133
[ 35.531774] ata2: EH complete
[ 36.725056] ata1.00: configured for UDMA/133
[ 36.725063] ata1: EH complete
[ 36.787052] ata2.00: configured for UDMA/133
[ 36.787058] ata2: EH complete
[ 36.796883] ata7.00: configured for UDMA/133
[ 36.796887] ata7: EH complete
[ 36.810369] ata8.00: configured for UDMA/133
[ 36.810374] ata8: EH complete
[ 55.394371] init: nmbd main process (15290) killed by TERM signal
[ 83.145040] usb 2-1.3: USB disconnect, device number 3
[ 84.611375] usb 2-1.3: new low-speed USB device number 5 using ehci-pci
[ 84.710348] Got empty serial number. Generate serial number from product.
[ 84.713975] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input4
[ 84.714037] hid-generic 0003:0458:003A.0003: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 138.172569] usb 2-1.3: USB disconnect, device number 5
[ 139.639237] usb 2-1.3: new low-speed USB device number 6 using ehci-pci
[ 139.738459] Got empty serial number. Generate serial number from product.
[ 139.742360] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 139.742448] hid-generic 0003:0458:003A.0004: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 193.200037] usb 2-1.3: USB disconnect, device number 6
[ 194.665984] usb 2-1.3: new low-speed USB device number 7 using ehci-pci
[ 194.766032] Got empty serial number. Generate serial number from product.
[ 194.769788] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input6
[ 194.769847] hid-generic 0003:0458:003A.0005: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 248.227525] usb 2-1.3: USB disconnect, device number 7
[ 249.693860] usb 2-1.3: new low-speed USB device number 8 using ehci-pci
[ 249.793043] Got empty serial number. Generate serial number from product.
[ 249.796377] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input7
[ 249.796411] hid-generic 0003:0458:003A.0006: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 303.255037] usb 2-1.3: USB disconnect, device number 8
[ 304.721666] usb 2-1.3: new low-speed USB device number 9 using ehci-pci
[ 304.820632] Got empty serial number. Generate serial number from product.
[ 304.824261] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input8
[ 304.824314] hid-generic 0003:0458:003A.0007: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 358.282503] usb 2-1.3: USB disconnect, device number 9
[ 359.748564] usb 2-1.3: new low-speed USB device number 10 using ehci-pci
[ 359.848662] Got empty serial number. Generate serial number from product.
[ 359.852382] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input9
[ 359.852419] hid-generic 0003:0458:003A.0008: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 413.309968] usb 2-1.3: USB disconnect, device number 10
[ 414.776425] usb 2-1.3: new low-speed USB device number 11 using ehci-pci
[ 414.875518] Got empty serial number. Generate serial number from product.
[ 414.878859] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input10
[ 414.878913] hid-generic 0003:0458:003A.0009: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 468.337495] usb 2-1.3: USB disconnect, device number 11
[ 469.803783] usb 2-1.3: new low-speed USB device number 12 using ehci-pci
[ 469.902753] Got empty serial number. Generate serial number from product.
[ 469.906322] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input11
[ 469.906349] hid-generic 0003:0458:003A.000A: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 523.364989] usb 2-1.3: USB disconnect, device number 12
[ 524.830894] usb 2-1.3: new low-speed USB device number 13 using ehci-pci
[ 524.930853] Got empty serial number. Generate serial number from product.
[ 524.934709] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input12
[ 524.934781] hid-generic 0003:0458:003A.000B: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 578.392463] usb 2-1.3: USB disconnect, device number 13
[ 579.858507] usb 2-1.3: new low-speed USB device number 14 using ehci-pci
[ 579.958354] Got empty serial number. Generate serial number from product.
[ 579.961823] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input13
[ 579.961884] hid-generic 0003:0458:003A.000C: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 633.419961] usb 2-1.3: USB disconnect, device number 14
[ 634.885988] usb 2-1.3: new low-speed USB device number 15 using ehci-pci
[ 634.985213] Got empty serial number. Generate serial number from product.
[ 634.988723] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input14
[ 634.988784] hid-generic 0003:0458:003A.000D: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 688.447439] usb 2-1.3: USB disconnect, device number 15
[ 689.913594] usb 2-1.3: new low-speed USB device number 16 using ehci-pci
[ 690.012458] Got empty serial number. Generate serial number from product.
[ 690.016330] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input15
[ 690.016389] hid-generic 0003:0458:003A.000E: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 743.474890] usb 2-1.3: USB disconnect, device number 16
[ 744.941202] usb 2-1.3: new low-speed USB device number 17 using ehci-pci
[ 745.040189] Got empty serial number. Generate serial number from product.
[ 745.043656] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input16
[ 745.043716] hid-generic 0003:0458:003A.000F: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 798.502421] usb 2-1.3: USB disconnect, device number 17
[ 799.968722] usb 2-1.3: new low-speed USB device number 18 using ehci-pci
[ 800.067557] Got empty serial number. Generate serial number from product.
[ 800.071309] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input17
[ 800.071370] hid-generic 0003:0458:003A.0010: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 853.529896] usb 2-1.3: USB disconnect, device number 18
[ 854.996184] usb 2-1.3: new low-speed USB device number 19 using ehci-pci
[ 855.095163] Got empty serial number. Generate serial number from product.
[ 855.098628] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input18
[ 855.098686] hid-generic 0003:0458:003A.0011: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 908.557368] usb 2-1.3: USB disconnect, device number 19
[ 910.023812] usb 2-1.3: new low-speed USB device number 20 using ehci-pci
[ 910.122899] Got empty serial number. Generate serial number from product.
[ 910.126354] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input19
[ 910.126416] hid-generic 0003:0458:003A.0012: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 963.584839] usb 2-1.3: USB disconnect, device number 20
[ 965.051408] usb 2-1.3: new low-speed USB device number 21 using ehci-pci
[ 965.150387] Got empty serial number. Generate serial number from product.
[ 965.153733] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input20
[ 965.153793] hid-generic 0003:0458:003A.0013: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1018.612358] usb 2-1.3: USB disconnect, device number 21
[ 1020.079026] usb 2-1.3: new low-speed USB device number 22 using ehci-pci
[ 1020.177999] Got empty serial number. Generate serial number from product.
[ 1020.181594] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input21
[ 1020.181627] hid-generic 0003:0458:003A.0014: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1073.639861] usb 2-1.3: USB disconnect, device number 22
[ 1075.106772] usb 2-1.3: new low-speed USB device number 23 using ehci-pci
[ 1075.206740] Got empty serial number. Generate serial number from product.
[ 1075.210462] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input22
[ 1075.210522] hid-generic 0003:0458:003A.0015: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1128.667329] usb 2-1.3: USB disconnect, device number 23
[ 1130.133276] usb 2-1.3: new low-speed USB device number 24 using ehci-pci
[ 1130.233437] Got empty serial number. Generate serial number from product.
[ 1130.237209] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input23
[ 1130.237268] hid-generic 0003:0458:003A.0016: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1183.694779] usb 2-1.3: USB disconnect, device number 24
[ 1185.160988] usb 2-1.3: new low-speed USB device number 25 using ehci-pci
[ 1185.260921] Got empty serial number. Generate serial number from product.
[ 1185.264677] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input24
[ 1185.264741] hid-generic 0003:0458:003A.0017: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1238.722317] usb 2-1.3: USB disconnect, device number 25
[ 1240.188474] usb 2-1.3: new low-speed USB device number 26 using ehci-pci
[ 1240.288282] Got empty serial number. Generate serial number from product.
[ 1240.292087] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input25
[ 1240.292148] hid-generic 0003:0458:003A.0018: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1293.749782] usb 2-1.3: USB disconnect, device number 26
[ 1295.216136] usb 2-1.3: new low-speed USB device number 27 using ehci-pci
[ 1295.316059] Got empty serial number. Generate serial number from product.
[ 1295.319675] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input26
[ 1295.319707] hid-generic 0003:0458:003A.0019: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1348.777291] usb 2-1.3: USB disconnect, device number 27
[ 1350.243563] usb 2-1.3: new low-speed USB device number 28 using ehci-pci
[ 1350.342925] Got empty serial number. Generate serial number from product.
[ 1350.346597] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input27
[ 1350.346684] hid-generic 0003:0458:003A.001A: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1403.804728] usb 2-1.3: USB disconnect, device number 28
[ 1405.271145] usb 2-1.3: new low-speed USB device number 29 using ehci-pci
[ 1405.370029] Got empty serial number. Generate serial number from product.
[ 1405.373506] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28
[ 1405.373566] hid-generic 0003:0458:003A.001B: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1458.832258] usb 2-1.3: USB disconnect, device number 29
[ 1460.298922] usb 2-1.3: new low-speed USB device number 30 using ehci-pci
[ 1460.398026] Got empty serial number. Generate serial number from product.
[ 1460.401647] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input29
[ 1460.401679] hid-generic 0003:0458:003A.001C: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1513.859723] usb 2-1.3: USB disconnect, device number 30
[ 1515.326517] usb 2-1.3: new low-speed USB device number 31 using ehci-pci
[ 1515.426392] Got empty serial number. Generate serial number from product.
[ 1515.429711] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input30
[ 1515.429743] hid-generic 0003:0458:003A.001D: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1568.887213] usb 2-1.3: USB disconnect, device number 31
[ 1570.353256] usb 2-1.3: new low-speed USB device number 32 using ehci-pci
[ 1570.452118] Got empty serial number. Generate serial number from product.
[ 1570.455578] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input31
[ 1570.455671] hid-generic 0003:0458:003A.001E: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1623.914671] usb 2-1.3: USB disconnect, device number 32
[ 1625.381018] usb 2-1.3: new low-speed USB device number 33 using ehci-pci
[ 1625.479855] Got empty serial number. Generate serial number from product.
[ 1625.483573] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input32
[ 1625.483604] hid-generic 0003:0458:003A.001F: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1678.942213] usb 2-1.3: USB disconnect, device number 33
[ 1680.408764] usb 2-1.3: new low-speed USB device number 34 using ehci-pci
[ 1680.507719] Got empty serial number. Generate serial number from product.
[ 1680.511041] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input33
[ 1680.511098] hid-generic 0003:0458:003A.0020: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1733.969709] usb 2-1.3: USB disconnect, device number 34
[ 1735.436361] usb 2-1.3: new low-speed USB device number 35 using ehci-pci
[ 1735.535291] Got empty serial number. Generate serial number from product.
[ 1735.538920] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input34
[ 1735.538981] hid-generic 0003:0458:003A.0021: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1788.997186] usb 2-1.3: USB disconnect, device number 35
[ 1790.463963] usb 2-1.3: new low-speed USB device number 36 using ehci-pci
[ 1790.562823] Got empty serial number. Generate serial number from product.
[ 1790.566131] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input35
[ 1790.566167] hid-generic 0003:0458:003A.0022: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1844.024624] usb 2-1.3: USB disconnect, device number 36
[ 1845.490725] usb 2-1.3: new low-speed USB device number 37 using ehci-pci
[ 1845.590641] Got empty serial number. Generate serial number from product.
[ 1845.594541] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input36
[ 1845.594594] hid-generic 0003:0458:003A.0023: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1899.052160] usb 2-1.3: USB disconnect, device number 37
[ 1900.518176] usb 2-1.3: new low-speed USB device number 38 using ehci-pci
[ 1900.617275] Got empty serial number. Generate serial number from product.
[ 1900.621039] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input37
[ 1900.621144] hid-generic 0003:0458:003A.0024: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 1954.079645] usb 2-1.3: USB disconnect, device number 38
[ 1955.545915] usb 2-1.3: new low-speed USB device number 39 using ehci-pci
[ 1955.644776] Got empty serial number. Generate serial number from product.
[ 1955.648518] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input38
[ 1955.648557] hid-generic 0003:0458:003A.0025: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2009.107104] usb 2-1.3: USB disconnect, device number 39
[ 2010.573429] usb 2-1.3: new low-speed USB device number 40 using ehci-pci
[ 2010.672640] Got empty serial number. Generate serial number from product.
[ 2010.676390] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input39
[ 2010.676420] hid-generic 0003:0458:003A.0026: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2064.134599] usb 2-1.3: USB disconnect, device number 40
[ 2065.601030] usb 2-1.3: new low-speed USB device number 41 using ehci-pci
[ 2065.699869] Got empty serial number. Generate serial number from product.
[ 2065.703343] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input40
[ 2065.703402] hid-generic 0003:0458:003A.0027: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2119.162058] usb 2-1.3: USB disconnect, device number 41
[ 2120.628654] usb 2-1.3: new low-speed USB device number 42 using ehci-pci
[ 2120.727364] Got empty serial number. Generate serial number from product.
[ 2120.730981] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input41
[ 2120.731039] hid-generic 0003:0458:003A.0028: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2174.189713] usb 2-1.3: USB disconnect, device number 42
[ 2175.656250] usb 2-1.3: new low-speed USB device number 43 using ehci-pci
[ 2175.755226] Got empty serial number. Generate serial number from product.
[ 2175.758945] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input42
[ 2175.758979] hid-generic 0003:0458:003A.0029: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2229.217072] usb 2-1.3: USB disconnect, device number 43
[ 2230.683733] usb 2-1.3: new low-speed USB device number 44 using ehci-pci
[ 2230.782670] Got empty serial number. Generate serial number from product.
[ 2230.786280] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input43
[ 2230.786312] hid-generic 0003:0458:003A.002A: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2284.244556] usb 2-1.3: USB disconnect, device number 44
[ 2285.711336] usb 2-1.3: new low-speed USB device number 45 using ehci-pci
[ 2285.811183] Got empty serial number. Generate serial number from product.
[ 2285.814584] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input44
[ 2285.814637] hid-generic 0003:0458:003A.002B: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2339.272004] usb 2-1.3: USB disconnect, device number 45
[ 2340.738944] usb 2-1.3: new low-speed USB device number 46 using ehci-pci
[ 2340.838942] Got empty serial number. Generate serial number from product.
[ 2340.842399] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input45
[ 2340.842458] hid-generic 0003:0458:003A.002C: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2394.299492] usb 2-1.3: USB disconnect, device number 46
[ 2395.765408] usb 2-1.3: new low-speed USB device number 47 using ehci-pci
[ 2395.864531] Got empty serial number. Generate serial number from product.
[ 2395.868261] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input46
[ 2395.868319] hid-generic 0003:0458:003A.002D: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2423.593995] perf interrupt took too long (2529 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
[ 2449.327023] usb 2-1.3: USB disconnect, device number 47
[ 2450.793063] usb 2-1.3: new low-speed USB device number 48 using ehci-pci
[ 2450.893144] Got empty serial number. Generate serial number from product.
[ 2450.896917] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input47
[ 2450.896951] hid-generic 0003:0458:003A.002E: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2504.354501] usb 2-1.3: USB disconnect, device number 48
[ 2505.820679] usb 2-1.3: new low-speed USB device number 49 using ehci-pci
[ 2505.920519] Got empty serial number. Generate serial number from product.
[ 2505.924361] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input48
[ 2505.924420] hid-generic 0003:0458:003A.002F: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2559.381989] usb 2-1.3: USB disconnect, device number 49
[ 2560.848252] usb 2-1.3: new low-speed USB device number 50 using ehci-pci
[ 2560.948136] Got empty serial number. Generate serial number from product.
[ 2560.951856] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input49
[ 2560.951911] hid-generic 0003:0458:003A.0030: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2614.409477] usb 2-1.3: USB disconnect, device number 50
[ 2615.875763] usb 2-1.3: new low-speed USB device number 51 using ehci-pci
[ 2615.974985] Got empty serial number. Generate serial number from product.
[ 2615.978745] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input50
[ 2615.978833] hid-generic 0003:0458:003A.0031: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2669.436927] usb 2-1.3: USB disconnect, device number 51
[ 2670.903384] usb 2-1.3: new low-speed USB device number 52 using ehci-pci
[ 2671.002476] Got empty serial number. Generate serial number from product.
[ 2671.006236] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input51
[ 2671.006290] hid-generic 0003:0458:003A.0032: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2724.464460] usb 2-1.3: USB disconnect, device number 52
[ 2725.930857] usb 2-1.3: new low-speed USB device number 53 using ehci-pci
[ 2726.030220] Got empty serial number. Generate serial number from product.
[ 2726.033862] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input52
[ 2726.033920] hid-generic 0003:0458:003A.0033: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2779.491949] usb 2-1.3: USB disconnect, device number 53
[ 2780.958609] usb 2-1.3: new low-speed USB device number 54 using ehci-pci
[ 2781.057960] Got empty serial number. Generate serial number from product.
[ 2781.061820] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input53
[ 2781.061909] hid-generic 0003:0458:003A.0034: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
[ 2834.519424] usb 2-1.3: USB disconnect, device number 54
[ 2835.986222] usb 2-1.3: new low-speed USB device number 55 using ehci-pci
[ 2836.086070] Got empty serial number. Generate serial number from product.
[ 2836.089777] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input54
[ 2836.089836] hid-generic 0003:0458:003A.0035: input: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1.3/input0
0000:00:00.0 Class 0600: Device 8086:0108 (rev 09)
Subsystem: Device 8086:0108
0000:00:01.0 Class 0604: Device 8086:0101 (rev 09)
Kernel driver in use: pcieport
0000:00:01.1 Class 0604: Device 8086:0105 (rev 09)
Kernel driver in use: pcieport
0000:00:02.0 Class 0300: Device 8086:010a (rev 09)
Subsystem: Device 8086:010a
0000:00:16.0 Class 0780: Device 8086:1c3a (rev 04)
Subsystem: Device 8086:1c3a
0000:00:1a.0 Class 0c03: Device 8086:1c2d (rev 05)
Subsystem: Device 8086:1c2d
Kernel driver in use: ehci-pci
0000:00:1b.0 Class 0403: Device 8086:1c20 (rev 05)
Subsystem: Device 8086:1c20
0000:00:1c.0 Class 0604: Device 8086:1c10 (rev b5)
Kernel driver in use: pcieport
0000:00:1c.4 Class 0604: Device 8086:1c18 (rev b5)
Kernel driver in use: pcieport
0000:00:1c.5 Class 0604: Device 8086:1c1a (rev b5)
Kernel driver in use: pcieport
0000:00:1c.6 Class 0604: Device 8086:1c1c (rev b5)
Kernel driver in use: pcieport
0000:00:1c.7 Class 0604: Device 8086:1c1e (rev b5)
Kernel driver in use: pcieport
0000:00:1d.0 Class 0c03: Device 8086:1c26 (rev 05)
Subsystem: Device 8086:1c26
Kernel driver in use: ehci-pci
0000:00:1e.0 Class 0604: Device 8086:244e (rev a5)
0000:00:1f.0 Class 0601: Device 8086:1c56 (rev 05)
Subsystem: Device 8086:1c56
Kernel driver in use: lpc_ich
0000:00:1f.2 Class 0106: Device 8086:1c02 (rev 05)
Subsystem: Device 8086:1c02
Kernel driver in use: ahci
0000:00:1f.3 Class 0c05: Device 8086:1c22 (rev 05)
Subsystem: Device 8086:1c22
0000:02:00.0 Class 0104: Device 1b4b:9485 (rev 03)
Subsystem: Device 1b4b:9485
0000:03:00.0 Class 0106: Device 1b4b:9125 (rev 11)
Subsystem: Device 1b4b:9125
Kernel driver in use: ahci
0000:04:00.0 Class 0200: Device 8086:10d3
Subsystem: Device 8086:0000
Kernel driver in use: e1000e
0000:05:00.0 Class 0200: Device 8086:10d3
Subsystem: Device 8086:0000
Kernel driver in use: e1000e
0000:06:00.0 Class 0200: Device 8086:10d3
Subsystem: Device 8086:0000
Kernel driver in use: e1000e
0000:07:00.0 Class 0200: Device 8086:10d3
Subsystem: Device 8086:0000
Kernel driver in use: e1000e
0001:07:00.0 Class 0000: Device 1b4b:9235 (rev ff)
0001:08:00.0 Class 0000: Device 1b4b:9235 (rev ff)
0001:09:00.0 Class 0000: Device 1b4b:9235 (rev ff)
0001:0a:00.0 Class 0000: Device 1b4b:9235 (rev ff)
Hide