cremenescu

I also never experienced any timebomb. What did the previous timebomb do exactly?

yeah, that is the version I used, just misstyped. I reinstalled the DSM with a DS3156xs as I had the DS3617xs installed and used the other network card on the microserver. all is good now, running update 5. It forced a migration this way.

I have a HP microserver Gen8 barebone with jun's loader 1.02 and just updated to "update 5" and I have only ssh acces to my DMS installation now. at first it worked, but after a couple of hours nothing works. when trying to acces the DMS i get this running dmesg I see this: dmesg root@DiskStation:~# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.102 (root@build3) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #15152 SMP Fri Sep 1 11:14:41 CST 2017 [ 0.000000] Command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1330ODN054774 mac1=98f2b3f71704 netif_num=1 vid=0x1F75 pid=0x0917 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009bc00-0x000000000009bfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000adde3fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000adde4000-0x00000000addedfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000addee000-0x00000000bbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000247ffefff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x247fff max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable [ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] e820: last_pfn = 0xadde4 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f4f80-0x000f4f8f] mapped at [ffff8800000f4f80] [ 0.000000] Base memory trampoline at [ffff880000095000] 95000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01ab7000, 0x01ab7fff] PGTABLE [ 0.000000] BRK [0x01ab8000, 0x01ab8fff] PGTABLE [ 0.000000] BRK [0x01ab9000, 0x01ab9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x247c00000-0x247dfffff] [ 0.000000] [mem 0x247c00000-0x247dfffff] page 2M [ 0.000000] BRK [0x01aba000, 0x01abafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x244000000-0x247bfffff] [ 0.000000] [mem 0x244000000-0x247bfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x200000000-0x243ffffff] [ 0.000000] [mem 0x200000000-0x243ffffff] page 2M [ 0.000000] BRK [0x01abb000, 0x01abbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x00100000-0xadde3fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0xadbfffff] page 2M [ 0.000000] [mem 0xadc00000-0xadde3fff] page 4k [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M [ 0.000000] BRK [0x01abc000, 0x01abcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x247e00000-0x247ffefff] [ 0.000000] [mem 0x247e00000-0x247ffefff] page 4k [ 0.000000] RAMDISK: [mem 0x3700e000-0x377fefff] [ 0.000000] ACPI: RSDP 0x00000000000F4F00 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 0x00000000ADDE6400 000B4 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: FACP 0x00000000ADDE6540 000F4 (v03 HP ProLiant 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: DSDT 0x00000000ADDE6640 01C1A (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS 0x00000000ADDE4140 00040 [ 0.000000] ACPI: SPCR 0x00000000ADDE4180 00050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: MCFG 0x00000000ADDE4200 0003C (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: HPET 0x00000000ADDE4240 00038 (v01 HP ProLiant 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000ADDE4280 00064 (v02 HP ProLiant 00000002 \xffffffd2? 0000162E) [ 0.000000] ACPI: SPMI 0x00000000ADDE4300 00040 (v05 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: ERST 0x00000000ADDE4340 00230 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: APIC 0x00000000ADDE4580 00252 (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: FFFF 0x00000000ADDE4800 00176 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: BERT 0x00000000ADDE4980 00030 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: HEST 0x00000000ADDE49C0 000BC (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000ADDE4A80 01914 (v01 HP ProLiant 00000001 \xffffffd2? 0000162E) [ 0.000000] ACPI: FFFF 0x00000000ADDE63C0 0002D (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: SSDT 0x00000000ADDE8280 00137 (v03 HP CRSPCI0 00000002 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000ADDE83C0 00177 (v03 HP riser0 00000002 INTL 20030228) [ 0.000000] ACPI: SSDT 0x00000000ADDE8540 001E1 (v01 HP pcc 00000001 INTL 20090625) [ 0.000000] ACPI: SSDT 0x00000000ADDE8740 00377 (v01 HP pmab 00000001 INTL 20090625) [ 0.000000] ACPI: SSDT 0x00000000ADDE8AC0 00504 (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea0007ffffff] PMD -> [ffff88023f600000-ffff8802465fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x247ffefff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009afff] [ 0.000000] node 0: [mem 0x00100000-0xadde3fff] [ 0.000000] node 0: [mem 0x100000000-0x247ffefff] [ 0.000000] On node 0 totalpages: 2055549 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3994 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 9681 pages used for memmap [ 0.000000] DMA32 zone: 708068 pages, LIFO batch:31 [ 0.000000] Normal zone: 18368 pages used for memmap [ 0.000000] Normal zone: 1343487 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: 64 Processors exceeds NR_CPUS limit of 16 [ 0.000000] smpboot: Allowing 16 CPUs, 14 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000 [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000adde4000 - 00000000addee000 [ 0.000000] PM: Registered nosave memory: 00000000addee000 - 00000000bc000000 [ 0.000000] PM: Registered nosave memory: 00000000bc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] e820: [mem 0xbc000000-0xfebfffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 24 pages/cpu @ffff880247a00000 s69376 r8192 d20736 u131072 [ 0.000000] pcpu-alloc: s69376 r8192 d20736 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2027423 [ 0.000000] Kernel command line: BOOT_IMAGE=/zImage syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3617xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=1330ODN054774 mac1=98f2b3f71704 netif_num=1 vid=0x1F75 pid=0x0917 [ 0.000000] Power on seq num: 0 [ 0.000000] Synology Hardware Version: DS3617xs-j [ 0.000000] Vender format version: 2 [ 0.000000] Serial Number: 1330ODN054774 [ 0.000000] Mac1: 98f2b3f71704 [ 0.000000] Internal netif num: 1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Memory: 8008240k/9568252k available (4809k kernel code, 1346056k absent, 213956k reserved, 3797k data, 760k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:808 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 33030144 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 2294.749 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.49 BogoMIPS (lpj=2294749) [ 0.000005] pid_max: default: 32768 minimum: 301 [ 0.000032] Security Framework initialized [ 0.000039] AppArmor: AppArmor initialized [ 0.000047] Mount-cache hash table entries: 256 [ 0.000199] Initializing cgroup subsys memory [ 0.000208] Initializing cgroup subsys devices [ 0.000210] Initializing cgroup subsys freezer [ 0.000212] Initializing cgroup subsys blkio [ 0.000234] CPU: Physical Processor ID: 0 [ 0.000235] CPU: Processor Core ID: 0 [ 0.000239] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.000242] mce: CPU supports 7 MCE banks [ 0.000252] CPU0: Thermal monitoring enabled (TM1) [ 0.000260] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 tlb_flushall_shift: 2 [ 0.000360] Freeing SMP alternatives: 24k freed [ 0.000366] ACPI: Core revision 20130328 [ 0.001390] ACPI: All ACPI Tables successfully acquired [ 0.001574] Switched APIC routing to physical flat. [ 0.001978] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.011974] smpboot: CPU0: Intel(R) Celeron(R) CPU G1610T @ 2.30GHz (fam: 06, model: 3a, stepping: 09) [ 0.011979] TSC deadline timer enabled [ 0.011988] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Broken BIOS detected, complain to your hardware vendor. [ 0.011994] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) [ 0.012169] Intel PMU driver. [ 0.012171] ... version: 3 [ 0.012172] ... bit width: 48 [ 0.012173] ... generic registers: 8 [ 0.012174] ... value mask: 0000ffffffffffff [ 0.012175] ... max period: 000000007fffffff [ 0.012176] ... fixed-purpose events: 3 [ 0.012176] ... event mask: 00000007000000ff [ 0.012415] smpboot: Booting Node 0, Processors #1 [ 0.025650] Brought up 2 CPUs [ 0.025653] smpboot: Total of 2 processors activated (9178.99 BogoMIPS) [ 0.026671] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.027695] devtmpfs: initialized [ 0.028133] xor: measuring software checksum speed [ 0.037644] prefetch64-sse: 8988.000 MB/sec [ 0.047651] generic_sse: 8240.000 MB/sec [ 0.047653] xor: using function: prefetch64-sse (8988.000 MB/sec) [ 0.047712] NET: Registered protocol family 16 [ 0.048160] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.048162] ACPI: bus type PCI registered [ 0.048257] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xb8000000-0xbbffffff] (base 0xb8000000) [ 0.048260] PCI: MMCONFIG at [mem 0xb8000000-0xbbffffff] reserved in E820 [ 0.048305] PCI: Using configuration type 1 for base access [ 0.051433] bio: create slab <bio-0> at 0 [ 0.067679] raid6: sse2x1 gen() 4414 MB/s [ 0.084692] raid6: sse2x1 xor() 3488 MB/s [ 0.101696] raid6: sse2x2 gen() 5488 MB/s [ 0.118709] raid6: sse2x2 xor() 3917 MB/s [ 0.135805] raid6: sse2x4 gen() 6371 MB/s [ 0.152810] raid6: sse2x4 xor() 6796 MB/s [ 0.152812] raid6: using algorithm sse2x4 gen() (6371 MB/s) [ 0.152813] raid6: .... xor() 6796 MB/s, rmw enabled [ 0.152814] raid6: using ssse3x2 recovery algorithm [ 0.152839] ACPI: Added _OSI(Module Device) [ 0.152840] ACPI: Added _OSI(Processor Device) [ 0.152842] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152843] ACPI: Added _OSI(Processor Aggregator Device) [ 0.153165] ACPI: EC: Look up EC in DSDT [ 0.154226] ACPI: Interpreter enabled [ 0.154235] ACPI: (supports S0 S4 S5) [ 0.154236] ACPI: Using IOAPIC for interrupt routing [ 0.154277] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.154316] ACPI: No dock devices found. [ 0.157210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-14]) [ 0.157267] acpi PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored [ 0.157305] PCI host bridge to bus 0000:00 [ 0.157308] pci_bus 0000:00: root bus resource [bus 00-14] [ 0.157309] pci_bus 0000:00: root bus resource [mem 0xbc000000-0xfbffffff] [ 0.157311] pci_bus 0000:00: root bus resource [io 0x1000-0xffff] [ 0.157313] pci_bus 0000:00: root bus resource [io 0x0000-0x03af] [ 0.157314] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7] [ 0.157315] pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff] [ 0.157317] pci_bus 0000:00: root bus resource [mem 0xfed00000-0xfed44fff] [ 0.157318] pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb] [ 0.157320] pci_bus 0000:00: root bus resource [io 0x03c0-0x03df] [ 0.157321] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.157330] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.157417] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400 [ 0.157497] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.157572] pci 0000:00:06.0: [8086:015d] type 01 class 0x060400 [ 0.157601] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.157689] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.157710] pci 0000:00:1a.0: reg 10: [mem 0xfacf0000-0xfacf03ff] [ 0.157799] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.157871] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.157947] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.158016] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.158088] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.158155] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 [ 0.158226] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.158291] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400 [ 0.158363] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.158433] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.158454] pci 0000:00:1d.0: reg 10: [mem 0xface0000-0xface03ff] [ 0.158543] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.158605] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.158705] pci 0000:00:1f.0: [8086:1c54] type 00 class 0x060100 [ 0.158873] pci 0000:00:1f.2: [8086:1c04] type 00 class 0x010400 [ 0.158890] pci 0000:00:1f.2: reg 10: [io 0x10c0-0x10c7] [ 0.158897] pci 0000:00:1f.2: reg 14: [io 0x10c8-0x10cb] [ 0.158904] pci 0000:00:1f.2: reg 18: [io 0x10d0-0x10d7] [ 0.158911] pci 0000:00:1f.2: reg 1c: [io 0x10d8-0x10db] [ 0.158918] pci 0000:00:1f.2: reg 20: [io 0x10e0-0x10ff] [ 0.158926] pci 0000:00:1f.2: reg 24: [mem 0xfacd0000-0xfacd07ff] [ 0.158969] pci 0000:00:1f.2: PME# supported from D3hot [ 0.159097] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.159156] pci 0000:02:00.0: [1590:005f] type 00 class 0x058000 [ 0.159170] pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.159180] pci 0000:02:00.0: reg 18: [mem 0xfbef0000-0xfbef7fff 64bit] [ 0.160831] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.160835] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.160840] pci 0000:00:06.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.160944] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 0.161042] pci 0000:03:00.0: [14e4:165f] type 00 class 0x020000 [ 0.161066] pci 0000:03:00.0: reg 10: [mem 0xfabf0000-0xfabfffff 64bit pref] [ 0.161085] pci 0000:03:00.0: reg 18: [mem 0xfabe0000-0xfabeffff 64bit pref] [ 0.161104] pci 0000:03:00.0: reg 20: [mem 0xfabd0000-0xfabdffff 64bit pref] [ 0.161117] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.161196] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.161273] pci 0000:03:00.1: [14e4:165f] type 00 class 0x020000 [ 0.161297] pci 0000:03:00.1: reg 10: [mem 0xfabc0000-0xfabcffff 64bit pref] [ 0.161316] pci 0000:03:00.1: reg 18: [mem 0xfabb0000-0xfabbffff 64bit pref] [ 0.161335] pci 0000:03:00.1: reg 20: [mem 0xfaba0000-0xfabaffff 64bit pref] [ 0.161348] pci 0000:03:00.1: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.161427] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold [ 0.162853] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.162873] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref] [ 0.162979] pci 0000:04:00.0: [1912:0014] type 00 class 0x0c0330 [ 0.163014] pci 0000:04:00.0: reg 10: [mem 0xfbff0000-0xfbff1fff 64bit] [ 0.163191] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.165837] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.165844] pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.165949] pci 0000:01:00.0: [103c:3306] type 00 class 0x088000 [ 0.165968] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff] [ 0.165982] pci 0000:01:00.0: reg 14: [mem 0xfbdf0000-0xfbdf01ff] [ 0.165995] pci 0000:01:00.0: reg 18: [io 0x3400-0x34ff] [ 0.166176] pci 0000:01:00.1: [102b:0533] type 00 class 0x030000 [ 0.166194] pci 0000:01:00.1: reg 10: [mem 0xbf000000-0xbfffffff pref] [ 0.166208] pci 0000:01:00.1: reg 14: [mem 0xfbde0000-0xfbde3fff] [ 0.166221] pci 0000:01:00.1: reg 18: [mem 0xfb000000-0xfb7fffff] [ 0.166398] pci 0000:01:00.2: [103c:3307] type 00 class 0x088000 [ 0.166417] pci 0000:01:00.2: reg 10: [io 0x3800-0x38ff] [ 0.166430] pci 0000:01:00.2: reg 14: [mem 0xfaff0000-0xfaff00ff] [ 0.166443] pci 0000:01:00.2: reg 18: [mem 0xfae00000-0xfaefffff] [ 0.166457] pci 0000:01:00.2: reg 1c: [mem 0xfad80000-0xfadfffff] [ 0.166470] pci 0000:01:00.2: reg 20: [mem 0xfad70000-0xfad77fff] [ 0.166483] pci 0000:01:00.2: reg 24: [mem 0xfad60000-0xfad67fff] [ 0.166497] pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.166560] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.166631] pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300 [ 0.166697] pci 0000:01:00.4: reg 20: [io 0x3c00-0x3c1f] [ 0.169845] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 0.169858] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff] [ 0.169862] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff] [ 0.169867] pci 0000:00:1c.7: bridge window [mem 0xbf000000-0xbfffffff 64bit pref] [ 0.169951] pci 0000:00:1e.0: PCI bridge to [bus 14] (subtractive decode) [ 0.169960] pci 0000:00:1e.0: bridge window [mem 0xbc000000-0xfbffffff] (subtractive decode) [ 0.169961] pci 0000:00:1e.0: bridge window [io 0x1000-0xffff] (subtractive decode) [ 0.169963] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.169964] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.169966] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode) [ 0.169967] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode) [ 0.169969] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode) [ 0.169970] pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode) [ 0.169972] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.170000] pci_bus 0000:00: on NUMA node 0 [ 0.170042] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.170079] acpi PNP0A08:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x00 [ 0.170080] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.170201] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) [ 0.170240] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) [ 0.170275] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11) [ 0.170309] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 0.170344] ACPI: PCI Interrupt Link [LNKE] (IRQs *5 7 10 11) [ 0.170379] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *4 [ 0.170414] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. [ 0.170449] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. [ 0.170533] acpi root: \_SB_.PCI0 notify handler is installed [ 0.170550] Found 1 acpi root devices [ 0.170662] vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none [ 0.170664] vgaarb: loaded [ 0.170665] vgaarb: bridge control possible 0000:01:00.1 [ 0.170770] SCSI subsystem initialized [ 0.170772] ACPI: bus type ATA registered [ 0.170850] libata version 3.00 loaded. [ 0.170927] pps_core: LinuxPPS API ver. 1 registered [ 0.170928] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.170945] PTP clock support registered [ 0.171016] PCI: Using ACPI for IRQ routing [ 0.172446] PCI: pci_cache_line_size set to 64 bytes [ 0.172505] e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff] [ 0.172506] e820: reserve RAM buffer [mem 0xadde4000-0xafffffff] [ 0.172508] e820: reserve RAM buffer [mem 0x247fff000-0x247ffffff] [ 0.172692] Switching to clocksource hpet [ 0.172763] AppArmor: AppArmor Filesystem Enabled [ 0.172796] pnp: PnP ACPI init [ 0.172800] ACPI: bus type PNP registered [ 0.172959] system 00:00: [io 0x0408-0x040f] has been reserved [ 0.172961] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.172963] system 00:00: [io 0x0310-0x0313] has been reserved [ 0.172964] system 00:00: [io 0x0316-0x0317] has been reserved [ 0.172966] system 00:00: [io 0x0700-0x071f] has been reserved [ 0.172967] system 00:00: [io 0x0880-0x08ff] has been reserved [ 0.172969] system 00:00: [io 0x0900-0x097f] could not be reserved [ 0.172971] system 00:00: [io 0x0cd4-0x0cd7] has been reserved [ 0.172973] system 00:00: [io 0x0cd0-0x0cd3] has been reserved [ 0.172975] system 00:00: [io 0x0f50-0x0f58] has been reserved [ 0.172977] system 00:00: [io 0x0ca0-0x0ca1] has been reserved [ 0.172979] system 00:00: [io 0x0ca4-0x0ca5] has been reserved [ 0.172981] system 00:00: [io 0x02f8-0x02ff] has been reserved [ 0.172983] system 00:00: [mem 0xb8000000-0xbbffffff] has been reserved [ 0.172985] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.172987] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.173029] pnp 00:01: Plug and Play ACPI device, IDs IPI0001 (active) [ 0.173085] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.173092] pnp 00:03: [dma 7] [ 0.173131] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.173173] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.173217] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.173287] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.173338] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.173386] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.173494] pnp: PnP ACPI: found 9 devices [ 0.173495] ACPI: bus type PNP unregistered [ 0.181708] pci 0000:00:1c.4: BAR 14: assigned [mem 0xbc000000-0xbc0fffff] [ 0.181711] pci 0000:00:01.0: PCI bridge to [bus 07] [ 0.181723] pci 0000:00:06.0: PCI bridge to [bus 02] [ 0.181726] pci 0000:00:06.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.181728] pci 0000:00:06.0: bridge window [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.181731] pci 0000:00:1c.0: PCI bridge to [bus 0d] [ 0.181743] pci 0000:03:00.0: BAR 6: assigned [mem 0xfab00000-0xfab1ffff pref] [ 0.181745] pci 0000:03:00.1: BAR 6: assigned [mem 0xfab20000-0xfab3ffff pref] [ 0.181746] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.181750] pci 0000:00:1c.4: bridge window [mem 0xbc000000-0xbc0fffff] [ 0.181754] pci 0000:00:1c.4: bridge window [mem 0xfab00000-0xfabfffff 64bit pref] [ 0.181759] pci 0000:00:1c.6: PCI bridge to [bus 04] [ 0.181763] pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.181772] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] [ 0.181774] pci 0000:00:1c.7: PCI bridge to [bus 01] [ 0.181776] pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff] [ 0.181780] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbdfffff] [ 0.181784] pci 0000:00:1c.7: bridge window [mem 0xbf000000-0xbfffffff 64bit pref] [ 0.181789] pci 0000:00:1e.0: PCI bridge to [bus 14] [ 0.182137] pci 0000:00:1e.0: setting latency timer to 64 [ 0.182140] pci_bus 0000:00: resource 4 [mem 0xbc000000-0xfbffffff] [ 0.182142] pci_bus 0000:00: resource 5 [io 0x1000-0xffff] [ 0.182143] pci_bus 0000:00: resource 6 [io 0x0000-0x03af] [ 0.182145] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7] [ 0.182146] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff] [ 0.182148] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff] [ 0.182149] pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb] [ 0.182151] pci_bus 0000:00: resource 11 [io 0x03c0-0x03df] [ 0.182152] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff] [ 0.182154] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.182156] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.182158] pci_bus 0000:03: resource 1 [mem 0xbc000000-0xbc0fffff] [ 0.182159] pci_bus 0000:03: resource 2 [mem 0xfab00000-0xfabfffff 64bit pref] [ 0.182161] pci_bus 0000:04: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.182163] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.182164] pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbdfffff] [ 0.182166] pci_bus 0000:01: resource 2 [mem 0xbf000000-0xbfffffff 64bit pref] [ 0.182167] pci_bus 0000:14: resource 4 [mem 0xbc000000-0xfbffffff] [ 0.182169] pci_bus 0000:14: resource 5 [io 0x1000-0xffff] [ 0.182170] pci_bus 0000:14: resource 6 [io 0x0000-0x03af] [ 0.182172] pci_bus 0000:14: resource 7 [io 0x03e0-0x0cf7] [ 0.182173] pci_bus 0000:14: resource 8 [io 0x0d00-0x0fff] [ 0.182175] pci_bus 0000:14: resource 9 [mem 0xfed00000-0xfed44fff] [ 0.182176] pci_bus 0000:14: resource 10 [io 0x03b0-0x03bb] [ 0.182177] pci_bus 0000:14: resource 11 [io 0x03c0-0x03df] [ 0.182179] pci_bus 0000:14: resource 12 [mem 0x000a0000-0x000bffff] [ 0.182211] NET: Registered protocol family 2 [ 0.182370] TCP established hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.182511] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.182644] TCP: Hash tables configured (established 65536 bind 65536) [ 0.182666] TCP: reno registered [ 0.182669] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.182691] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.182787] NET: Registered protocol family 1 [ 0.182860] RPC: Registered named UNIX socket transport module. [ 0.182862] RPC: Registered udp transport module. [ 0.182863] RPC: Registered tcp transport module. [ 0.182863] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.204859] pci 0000:01:00.1: Boot video device [ 0.204935] PCI: CLS 64 bytes, default 64 [ 0.204973] Trying to unpack rootfs image as initramfs... [ 1.997228] Freeing initrd memory: 8132k freed [ 2.016503] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.016509] software IO TLB [mem 0xa9de4000-0xadde4000] (64MB) mapped at [ffff8800a9de4000-ffff8800adde3fff] [ 2.027539] audit: initializing netlink socket (disabled) [ 2.027554] type=2000 audit(1506580083.025:1): initialized [ 2.036485] bounce pool size: 64 pages [ 2.038895] VFS: Disk quotas dquot_6.5.2 [ 2.038919] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.039587] NFS: Registering the id_resolver key type [ 2.039596] Key type id_resolver registered [ 2.039597] Key type id_legacy registered [ 2.039606] msgmni has been set to 15657 [ 2.039752] async_tx: api initialized (async) [ 2.039816] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.039818] io scheduler noop registered [ 2.039819] io scheduler deadline registered [ 2.039826] io scheduler cfq registered (default) [ 2.040439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 2.040807] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 2.716123] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.719476] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250 [ 2.795188] brd: module loaded [ 2.800670] ACPI Warning: 0x0000000000000928-0x000000000000092F SystemIO conflicts with Region \SGPE 1 (20130328/utaddress-249) [ 2.800677] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.800680] Unknown LPC device 1c54 [ 2.803635] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 2.807993] Loading iSCSI transport class v2.0-870. [ 2.832971] rdac: device handler registered [ 2.837598] ahci 0000:00:1f.2: version 3.0 [ 2.837721] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X [ 2.837747] ahci: SSS flag set, parallel bus scan disabled [ 2.848372] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl RAID mode [ 2.848377] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst [ 2.848381] ahci 0000:00:1f.2: setting latency timer to 64 [ 2.878200] scsi0 : ahci [ 2.881368] scsi1 : ahci [ 2.885102] scsi2 : ahci [ 2.887928] scsi3 : ahci [ 2.889260] scsi4 : ahci [ 2.892737] scsi5 : ahci [ 2.895051] ata1: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0100 irq 42 [ 2.895055] ata2: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0180 irq 42 [ 2.895057] ata3: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0200 irq 42 [ 2.895059] ata4: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0280 irq 42 [ 2.895061] ata5: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0300 irq 42 [ 2.895063] ata6: SATA max UDMA/133 abar m2048@0xfacd0000 port 0xfacd0380 irq 42 [ 2.905853] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 2.909149] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.909156] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.910216] rtc_cmos 00:06: RTC can wake from S4 [ 2.912477] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 2.912508] rtc_cmos 00:06: alarms up to one day, 114 bytes nvram, hpet irqs [ 2.915086] i2c /dev entries driver [ 2.920282] md: linear personality registered for level -1 [ 2.920286] md: raid0 personality registered for level 0 [ 2.920287] md: raid1 personality registered for level 1 [ 2.920288] md: raid10 personality registered for level 10 [ 2.922701] md: raid6 personality registered for level 6 [ 2.922704] md: raid5 personality registered for level 5 [ 2.922706] md: raid4 personality registered for level 4 [ 2.922707] md: raidF1 personality registered for level 45 [ 2.924131] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com [ 2.924135] cpuidle: using governor ladder [ 2.924137] cpuidle: using governor menu [ 2.924216] TCP: cubic registered [ 2.924218] NET: Registered protocol family 17 [ 2.924240] Key type dns_resolver registered [ 3.017256] tsc: Refined TSC clocksource calibration: 2294.788 MHz [ 3.017263] Switching to clocksource tsc [ 3.356080] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.356600] ata1.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133 [ 3.356604] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.357163] ata1.00: configured for UDMA/133 [ 3.357685] scsi 0:0:0:0: Direct-Access WDC WD40EFRX-68WT0N0 82.0 PQ: 0 ANSI: 5 [ 3.358601] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 3.358606] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.358646] sd 0:0:0:0: [sda] Write Protect is off [ 3.358649] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.358666] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.415657] sda: sda1 sda2 sda5 sda6 [ 3.418963] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.820847] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.821372] ata2.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133 [ 3.821375] ata2.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.821932] ata2.00: configured for UDMA/133 [ 3.822452] scsi 1:0:0:0: Direct-Access WDC WD40EFRX-68WT0N0 82.0 PQ: 0 ANSI: 5 [ 3.823401] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 3.823406] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.823446] sd 1:0:0:0: [sdb] Write Protect is off [ 3.823449] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.823467] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.872651] sdb: sdb1 sdb2 sdb5 sdb6 [ 3.875283] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.284604] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.285132] ata3.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133 [ 4.285135] ata3.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.285711] ata3.00: configured for UDMA/133 [ 4.286229] scsi 2:0:0:0: Direct-Access WDC WD40EFRX-68WT0N0 82.0 PQ: 0 ANSI: 5 [ 4.287152] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 4.287157] sd 2:0:0:0: [sdc] 4096-byte physical blocks [ 4.287196] sd 2:0:0:0: [sdc] Write Protect is off [ 4.287199] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 4.287217] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.334282] sdc: sdc1 sdc2 sdc5 sdc6 [ 4.337576] sd 2:0:0:0: [sdc] Attached SCSI disk [ 4.751370] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.751899] ata4.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133 [ 4.751904] ata4.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 4.752461] ata4.00: configured for UDMA/133 [ 4.752979] scsi 3:0:0:0: Direct-Access WDC WD40EFRX-68WT0N0 82.0 PQ: 0 ANSI: 5 [ 4.753932] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 4.753936] sd 3:0:0:0: [sdd] 4096-byte physical blocks [ 4.753975] sd 3:0:0:0: [sdd] Write Protect is off [ 4.753978] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 4.753995] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.795028] sdd: sdd1 sdd2 sdd5 sdd6 [ 4.797631] sd 3:0:0:0: [sdd] Attached SCSI disk [ 5.062206] ata5: SATA link down (SStatus 0 SControl 300) [ 5.367049] ata6: SATA link down (SStatus 0 SControl 300) [ 5.367089] registered taskstats version 1 [ 5.367544] rtc_cmos 00:06: setting system clock to 2017-09-28 06:28:07 UTC (1506580087) [ 5.368165] Freeing unused kernel memory: 760k freed [ 5.368266] Write protecting the kernel read-only data: 8192k [ 5.368420] Freeing unused kernel memory: 1324k freed [ 5.369756] Freeing unused kernel memory: 500k freed [ 5.442034] ACPI: bus type USB registered [ 5.442780] usbcore: registered new interface driver usbfs [ 5.443612] usbcore: registered new interface driver hub [ 5.446207] usbcore: registered new interface driver ethub [ 5.448723] usbcore: registered new device driver usb [ 5.463945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.470862] ehci-pci: EHCI PCI platform driver [ 5.471018] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 5.471030] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 5.471038] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 5.471053] ehci-pci 0000:00:1a.0: debug port 2 [ 5.474949] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 5.474970] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfacf0000 [ 5.479985] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 5.480246] hub 1-0:1.0: USB hub found [ 5.480252] hub 1-0:1.0: 2 ports detected [ 5.480425] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 5.480433] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 5.480438] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 5.480453] ehci-pci 0000:00:1d.0: debug port 2 [ 5.484345] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 5.484366] ehci-pci 0000:00:1d.0: irq 20, io mem 0xface0000 [ 5.489993] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 5.493157] hub 2-0:1.0: USB hub found [ 5.493167] hub 2-0:1.0: 2 ports detected [ 5.508870] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.518947] uhci_hcd: USB Universal Host Controller Interface driver [ 5.519061] uhci_hcd 0000:01:00.4: UHCI Host Controller [ 5.519071] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3 [ 5.519091] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports [ 5.519134] uhci_hcd 0000:01:00.4: irq 16, io base 0x00003c00 [ 5.519681] hub 3-0:1.0: USB hub found [ 5.519687] hub 3-0:1.0: 2 ports detected [ 5.535191] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 5.535202] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4 [ 5.735312] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X [ 5.735318] xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X [ 5.735322] xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X [ 5.735595] xHCI xhci_add_endpoint called for root hub [ 5.735598] xHCI xhci_check_bandwidth called for root hub [ 5.735657] hub 4-0:1.0: USB hub found [ 5.735667] hub 4-0:1.0: 2 ports detected [ 5.735715] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 5.735719] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 [ 5.736142] xHCI xhci_add_endpoint called for root hub [ 5.736144] xHCI xhci_check_bandwidth called for root hub [ 5.736658] hub 5-0:1.0: USB hub found [ 5.736667] hub 5-0:1.0: 2 ports detected [ 5.769104] usbcore: registered new interface driver usb-storage [ 5.790699] VMware PVSCSI driver - version 1.0.2.0-k [ 5.797673] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 5.805074] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 5.828558] Fusion MPT base driver 3.04.20 [ 5.828562] Copyright (c) 1999-2008 LSI Corporation [ 5.839490] Fusion MPT SPI Host driver 3.04.20 [ 5.841811] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 5.846474] Fusion MPT SAS Host driver 3.04.20 [ 5.853538] Fusion MPT misc device (ioctl) driver 3.04.20 [ 5.853623] mptctl: Registered with Fusion MPT base driver [ 5.853626] mptctl: /dev/mptctl @ (major,minor=10,220) [ 5.868613] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013 [ 5.876626] mpt2sas version 20.00.00.00 loaded [ 5.886510] mpt3sas version 13.00.00.00 loaded [ 5.901762] broadwell_synobios: module license 'Synology Inc.' taints kernel. [ 5.901772] Disabling lock debugging due to kernel taint [ 5.902568] 2017-9-28 6:28:7 UTC [ 5.902572] synobios: load, major number 201 [ 5.902576] Brand: Synology [ 5.902578] Model: DS-3617xs [ 5.902581] set group disks wakeup number to 4, spinup time deno 7 [ 5.902585] synobios cpu_arch proc entry initialized [ 5.902587] synobios crypto_hw proc entry initialized [ 5.902589] synobios syno_platform proc entry initialized [ 5.912703] synobios: unload [ 5.997541] Got empty serial number. Generate serial number from product. [ 6.126662] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.261975] Got empty serial number. Generate serial number from product. [ 6.262308] hub 1-1:1.0: USB hub found [ 6.262358] hub 1-1:1.0: 6 ports detected [ 6.385530] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 6.520841] Got empty serial number. Generate serial number from product. [ 6.520850] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 6.521171] hub 2-1:1.0: USB hub found [ 6.521225] hub 2-1:1.0: 6 ports detected [ 6.605549] usb 1-1.3: new high-speed USB device number 3 using ehci-pci [ 6.701833] usb-storage 1-1.3:1.0: USB Mass Storage device detected [ 6.702544] scsi6 : usb-storage 1-1.3:1.0 [ 6.804446] usb 2-1.3: new high-speed USB device number 3 using ehci-pci [ 6.899644] Got empty serial number. Generate serial number from product. [ 6.899654] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 6.899656] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa1 [ 6.899976] hub 2-1.3:1.0: USB hub found [ 6.900029] hub 2-1.3:1.0: 2 ports detected [ 7.706357] scsi 6:0:0:0: Direct-Access Innostor USB3.0 1.00 PQ: 0 ANSI: 6 [ 7.707871] sd 6:0:0:0: [synoboot] 30617600 512-byte logical blocks: (15.6 GB/14.5 GiB) [ 7.708232] sd 6:0:0:0: [synoboot] Write Protect is off [ 7.708236] sd 6:0:0:0: [synoboot] Mode Sense: 23 00 00 00 [ 7.708608] sd 6:0:0:0: [synoboot] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA [ 7.720133] synoboot: synoboot1 synoboot2 synoboot3 [ 7.723790] sd 6:0:0:0: [synoboot] Attached SCSI removable disk [ 10.920604] md: Autodetecting RAID arrays. [ 10.968612] md: invalid raid superblock magic on sda5 [ 10.968741] md: sda5 does not have a valid v0.90 superblock, not importing! [ 10.996457] md: invalid raid superblock magic on sda6 [ 10.996582] md: sda6 does not have a valid v0.90 superblock, not importing! [ 11.039195] md: invalid raid superblock magic on sdb5 [ 11.039320] md: sdb5 does not have a valid v0.90 superblock, not importing! [ 11.068272] md: invalid raid superblock magic on sdb6 [ 11.068397] md: sdb6 does not have a valid v0.90 superblock, not importing! [ 11.107188] md: invalid raid superblock magic on sdc5 [ 11.107313] md: sdc5 does not have a valid v0.90 superblock, not importing! [ 11.135521] md: invalid raid superblock magic on sdc6 [ 11.135646] md: sdc6 does not have a valid v0.90 superblock, not importing! [ 11.180156] md: invalid raid superblock magic on sdd5 [ 11.180281] md: sdd5 does not have a valid v0.90 superblock, not importing! [ 11.204507] md: invalid raid superblock magic on sdd6 [ 11.204631] md: sdd6 does not have a valid v0.90 superblock, not importing! [ 11.204636] md: Scanned 16 and added 8 devices. [ 11.204637] md: autorun ... [ 11.204638] md: considering sda1 ... [ 11.204643] md: adding sda1 ... [ 11.204645] md: sda2 has different UUID to sda1 [ 11.204649] md: adding sdb1 ... [ 11.204651] md: sdb2 has different UUID to sda1 [ 11.204654] md: adding sdc1 ... [ 11.204656] md: sdc2 has different UUID to sda1 [ 11.204659] md: adding sdd1 ... [ 11.204662] md: sdd2 has different UUID to sda1 [ 11.204673] md: created md0 [ 11.204675] md: bind<sdd1> [ 11.204690] md: bind<sdc1> [ 11.204698] md: bind<sdb1> [ 11.204705] md: bind<sda1> [ 11.204712] md: running: <sda1><sdb1><sdc1><sdd1> [ 11.204888] md/raid1:md0: active with 4 out of 8 mirrors [ 11.204908] md0: detected capacity change from 0 to 2549940224 [ 11.204990] md: considering sda2 ... [ 11.204993] md: adding sda2 ... [ 11.204996] md: adding sdb2 ... [ 11.204999] md: adding sdc2 ... [ 11.205002] md: adding sdd2 ... [ 11.205818] md: created md1 [ 11.205820] md: bind<sdd2> [ 11.205828] md: bind<sdc2> [ 11.205836] md: bind<sdb2> [ 11.205843] md: bind<sda2> [ 11.205849] md: running: <sda2><sdb2><sdc2><sdd2> [ 11.209200] md/raid1:md1: active with 4 out of 8 mirrors [ 11.209227] md1: detected capacity change from 0 to 2147418112 [ 11.209738] md: ... autorun DONE. [ 11.295694] md0: unknown partition table [ 12.620535] EXT4-fs (md0): barriers disabled [ 12.630057] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 14.197556] usb 3-1: USB disconnect, device number 2 [ 16.423380] usb 3-1: new full-speed USB device number 3 using uhci_hcd [ 16.578747] Got empty serial number. Generate serial number from product. [ 16.826276] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 18.250953] EXT4-fs (md0): re-mounted. Opts: (null) [ 20.516591] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 20.516651] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 20.516707] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 20.516761] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 20.516816] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 20.768135] md1: unknown partition table [ 20.904850] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 21.330107] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 21.330583] zram: Created 2 device(s) ... [ 21.353817] Adding 2405372k swap on /dev/zram0. Priority:1 extents:1 across:2405372k SS [ 21.365173] Adding 2405372k swap on /dev/zram1. Priority:1 extents:1 across:2405372k SS [ 22.334821] NET: Registered protocol family 10 [ 22.368687] sit: IPv6 over IPv4 tunneling driver [ 22.787807] Monitor-Mwait will be used to enter C-1 state [ 22.787822] Monitor-Mwait will be used to enter C-2 state [ 22.787835] ACPI: acpi_idle registered with cpuidle [ 22.953685] init: syno-auth-check main process (5461) killed by TERM signal [ 23.298325] fuse init (API version 7.22) [ 23.303552] dca service started, version 1.12.1 [ 23.308708] e1000e: Intel(R) PRO/1000 Network Driver - 3.3.4-NAPI [ 23.308712] e1000e: Copyright(c) 1999 - 2016 Intel Corporation. [ 23.347650] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.3 [ 23.347655] Copyright (c) 2007-2015 Intel Corporation. [ 23.359953] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.4.6 [ 23.359957] Copyright(c) 1999 - 2016 Intel Corporation. [ 23.360018] ixgbe unsupported_sfp_notify proc entry initialized [ 23.385495] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 1.5.19 [ 23.385499] i40e: Copyright(c) 2013 - 2016 Intel Corporation. [ 23.422882] tn40xx low_mem_msg proc entry initialized [ 23.422888] tn40xx low_mem_counter proc entry initialized [ 23.422890] tn40xx debug_msg proc entry initialized [ 23.422892] tn40xx: Tehuti Network Driver, 0.3.6.12.3 [ 23.449904] Loading modules backported from Linux version v3.18.1-0-g39ca484 [ 23.449909] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c [ 23.514508] Compat-mlnx-ofed backport release: cd30181 [ 23.514513] Backport based on mlnx_ofed/mlnx_rdma.git cd30181 [ 23.514514] compat.git: mlnx_ofed/mlnx_rdma.git [ 23.874409] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.00 ($DateTime: 2015/07/28 00:13:30 $) [ 23.969136] bio: create slab <bio-1> at 1 [ 23.969265] Btrfs loaded [ 24.015019] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 24.024838] sky2: driver version 1.30 [ 24.034759] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01 [ 24.044579] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42 [ 24.054748] QLogic/NetXen Network Driver v4.0.80 [ 24.059846] Solarflare NET driver v3.2 [ 24.064977] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 24.064981] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 24.069874] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 24.074826] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI [ 24.089834] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012) [ 24.113801] tg3.c:v3.132 (May 21, 2013) [ 24.123825] tg3 0000:03:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 98:f2:b3:f7:17:04 [ 24.123830] tg3 0000:03:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 24.123832] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 24.123835] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit] [ 24.138357] tg3 0000:03:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 98:f2:b3:f7:17:05 [ 24.138363] tg3 0000:03:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1]) [ 24.138366] tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1] [ 24.138368] tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit] [ 24.148937] usbcore: registered new interface driver ax88179_178a [ 24.153815] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 24.153822] ACPI: Power Button [PWRF] [ 24.212862] 2017-9-28 6:28:26 UTC [ 24.212868] synobios: load, major number 201 [ 24.212871] Brand: Synology [ 24.212874] Model: DS-3617xs [ 24.212877] set group disks wakeup number to 4, spinup time deno 7 [ 24.212880] synobios cpu_arch proc entry initialized [ 24.212882] synobios crypto_hw proc entry initialized [ 24.212884] synobios syno_platform proc entry initialized [ 24.390519] systemd-udevd[6362]: starting version 204 [ 25.745827] tg3 0000:03:00.0: irq 46 for MSI/MSI-X [ 25.745835] tg3 0000:03:00.0: irq 47 for MSI/MSI-X [ 25.745840] tg3 0000:03:00.0: irq 48 for MSI/MSI-X [ 25.870994] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.154420] usb 3-1: USB disconnect, device number 3 [ 28.154501] [sched_delayed] sched: RT throttling activated [ 28.279682] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.383391] usb 3-1: new full-speed USB device number 4 using uhci_hcd [ 28.405832] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 28.539768] Got empty serial number. Generate serial number from product. [ 28.547837] tg3 0000:03:00.1: irq 49 for MSI/MSI-X [ 28.547845] tg3 0000:03:00.1: irq 50 for MSI/MSI-X [ 28.547849] tg3 0000:03:00.1: irq 51 for MSI/MSI-X [ 28.672287] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 28.816437] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 30.887659] usbcore: registered new interface driver usblp [ 30.946122] usbcore: registered new interface driver usbhid [ 30.946125] usbhid: USB HID core driver [ 30.973252] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.0/input/input1 [ 30.973264] hid-generic 0003:03F0:7029.0001: input: USB HID v1.01 Keyboard [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input0 [ 30.973341] input: BMC Virtual Keyboard as /devices/pci0000:00/0000:00:1c.7/0000:01:00.4/usb3/3-1/3-1:1.1/input/input2 [ 30.973347] hid-generic 0003:03F0:7029.0002: input: USB HID v1.01 Mouse [BMC Virtual Keyboard ] on usb-0000:01:00.4-1/input1 [ 31.116180] tg3 0000:03:00.0 eth0: Link is up at 1000 Mbps, full duplex [ 31.116185] tg3 0000:03:00.0 eth0: Flow control is off for TX and off for RX [ 31.116186] tg3 0000:03:00.0 eth0: EEE is disabled [ 31.116201] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 31.154958] init: synotifyd main process ended, respawning [ 31.239892] init: synotifyd main process ended, respawning [ 31.251825] init: synotifyd main process ended, respawning [ 31.263145] init: synotifyd main process ended, respawning [ 31.274658] init: synotifyd main process ended, respawning [ 31.286231] init: synotifyd respawning too fast, stopped [ 32.819437] ata1.00: configured for UDMA/133 [ 32.819445] ata1: EH complete [ 32.936767] ata2.00: configured for UDMA/133 [ 32.936775] ata2: EH complete [ 33.020596] ata3.00: configured for UDMA/133 [ 33.020604] ata3: EH complete [ 33.086579] ata4.00: configured for UDMA/133 [ 33.086587] ata4: EH complete [ 33.458882] init: findhostd main process (11574) terminated with status 127 [ 33.458915] init: findhostd faild on spawn stage, stopped [ 33.459116] init: synocgid main process (11573) terminated with status 127 [ 33.459135] init: synocgid faild on spawn stage, stopped [ 33.511603] init: snmpd main process (11517) terminated with status 127 [ 33.511671] init: snmpd main process ended, respawning [ 33.544130] init: synosnmpcd main process (11735) killed by TERM signal [ 33.601136] init: snmpd main process (11827) terminated with status 127 [ 33.601171] init: snmpd main process ended, respawning [ 33.615994] init: s2s_daemon main process (11705) terminated with status 127 [ 33.616032] init: s2s_daemon faild on spawn stage, stopped [ 33.709966] init: synoscgi main process (11706) terminated with status 127 [ 33.709999] init: synoscgi main process ended, respawning [ 33.730250] init: synosnmpcd main process (11952) killed by TERM signal [ 33.802583] init: synoscgi main process (12011) terminated with status 127 [ 33.802620] init: synoscgi main process ended, respawning [ 33.807777] init: snmpd main process (11994) terminated with status 127 [ 33.807816] init: snmpd main process ended, respawning [ 33.852865] init: synosnmpcd main process (12082) killed by TERM signal [ 33.873094] init: synoscgi main process (12071) terminated with status 127 [ 33.873135] init: synoscgi main process ended, respawning [ 33.888332] init: snmpd main process (12094) terminated with status 127 [ 33.888367] init: snmpd main process ended, respawning [ 33.926878] iSCSI:target_core_rodsp_server.c:1017:rodsp_server_init RODSP server started, login_key(98f2b3f71704). [ 33.942020] iSCSI:extent_pool.c:757:ep_init syno_extent_pool successfully initialized [ 33.957315] iSCSI:target_core_device.c:569:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 33.959188] iSCSI:target_core_lunbackup.c:358:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully [ 33.969652] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 33.975550] init: synoscgi main process (12128) terminated with status 127 [ 33.975587] init: synoscgi main process ended, respawning [ 33.975698] init: synosnmpcd main process (12157) killed by TERM signal [ 33.994747] iSCSI:target_core_file.c:89:fd_attach_hba RODSP plugin for fileio is enabled. [ 33.994757] iSCSI:target_core_ep.c:831:ep_attach_hba RODSP plugin for epio is enabled. [ 33.994759] iSCSI:target_core_ep.c:838:ep_attach_hba ODX Token Manager is enabled. [ 34.008843] init: snmpd main process (12211) terminated with status 127 [ 34.008878] init: snmpd main process ended, respawning [ 34.011837] init: synoscgi main process (12222) terminated with status 127 [ 34.011874] init: synoscgi main process ended, respawning [ 34.018124] init: synosnmpcd main process (12227) killed by TERM signal [ 34.037104] init: snmpd main process (12229) terminated with status 127 [ 34.037137] init: snmpd respawning too fast, stopped [ 34.051693] init: synoscgi main process (12232) terminated with status 127 [ 34.051740] init: synoscgi respawning too fast, stopped [ 34.060547] init: synosnmpcd main process (12246) killed by TERM signal [ 34.397766] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 34.397882] NFSD: starting 90-second grace period (net ffffffff81854640) [ 35.330002] loop: module loaded [ 215.372621] init: pkgctl-Docker pre-start process (15443) terminated with status 127 [ 215.375941] init: pkgctl-NoteStation pre-start process (15444) terminated with status 127 [ 215.383322] init: pkgctl-WebStation pre-start process (15445) terminated with status 127 [ 215.389582] init: pkgctl-CloudStation pre-start process (15447) terminated with status 127 [ 215.396754] init: pkgctl-PHP5.6 pre-start process (15448) terminated with status 127 [ 215.407504] init: pkgctl-MariaDB pre-start process (15449) terminated with status 127 [ 215.417643] init: pkgctl-PythonModule pre-start process (15450) terminated with status 127 [ 215.417803] init: pkgctl-WebDAVServer pre-start process (15451) terminated with status 127 [ 215.423087] init: pkgctl-Perl pre-start process (15452) terminated with status 127 [ 215.423256] init: pkgctl-CloudSync pre-start process (15453) terminated with status 127 [ 215.423422] init: pkgctl-DownloadStation pre-start process (15454) terminated with status 127 [ 215.428086] init: pkgctl-SynoFinder pre-start process (15455) terminated with status 127 [ 215.449925] init: pkgctl-FileStation pre-start process (15456) terminated with status 127 [ 215.543807] init: pkgctl-LogCenter pre-start process (15457) terminated with status 127 [ 215.564819] init: pkgctl-MariaDB10 pre-start process (15458) terminated with status 127 [ 215.573622] init: pkgctl-Node.js_v4 pre-start process (15459) terminated with status 127 [ 215.576318] init: pkgctl-TextEditor pre-start process (15460) terminated with status 127 [ 215.608829] init: pkgctl-WebStation post-stop process (15480) terminated with status 127 [ 215.611532] init: pkgctl-MariaDB post-stop process (15482) terminated with status 127 [ 215.612995] init: pkg-WebStation-userdir main process (15490) terminated with status 1 [ 215.643746] init: pkgctl-NoteStation post-stop process (15479) terminated with status 127 [ 215.644016] init: pkgctl-WebDAVServer post-stop process (15484) terminated with status 127 [ 215.658425] init: pkgctl-Perl post-stop process (15485) terminated with status 127 [ 215.681342] init: pkgctl-CloudStation post-stop process (15481) terminated with status 127 [ 215.692361] init: pkgctl-Docker post-stop process (15478) terminated with status 127 [ 215.708151] init: pkgctl-PythonModule post-stop process (15483) terminated with status 127 [ 215.720477] init: pkgctl-CloudSync post-stop process (15486) terminated with status 127 [ 215.734209] init: pkgctl-SynoFinder post-stop process (15488) terminated with status 127 [ 215.747605] init: pkgctl-DownloadStation post-stop process (15487) terminated with status 127 [ 215.757994] init: pkgctl-Node.js_v4 post-stop process (15517) terminated with status 127 [ 215.769078] init: pkgctl-LogCenter post-stop process (15515) terminated with status 127 [ 215.777058] init: pkgctl-FileStation post-stop process (15489) terminated with status 127 [ 215.784564] init: pkgctl-MariaDB10 post-stop process (15516) terminated with status 127 [ 215.833137] init: pkgctl-TextEditor post-stop process (15518) terminated with status 127 [ 215.833339] init: pkgctl-PHP5.6 post-stop process (15527) terminated with status 127 [ 216.028225] init: esynoscheduler-bootup main process (15613) terminated with status 127 [ 216.442960] ata1.00: configured for UDMA/133 [ 216.442968] ata1: EH complete [ 216.443514] ata3.00: configured for UDMA/133 [ 216.443519] ata3: EH complete [ 216.443527] ata4.00: configured for UDMA/133 [ 216.443529] ata4: EH complete [ 216.446179] ata2.00: configured for UDMA/133 [ 216.446185] ata2: EH complete [ 1622.384775] usb 3-1: USB disconnect, device number 4 [ 7419.713181] perf interrupt took too long (2506 > 5000), lowering kernel.perf_event_max_sample_rate to 50000 root@DiskStation:~# Hide any idea on how to fix this? or maybe downgrade to "update 4"? 10x!