Hi everyone,
I am missing one of my two volumes since 6.2.2 update (and Jun's loader from 1.02b to 1.03b), and missing 6 HDD, the ones that are connected to the motherboard.
It's really strange that these drives would not work...
grub.cfg is configured like this (and was configured the same way on 6.1.7):
set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=1 SasIdxMap=0'
and I tried with SataPortMap=46, and SataPortMap=64 with no success.
Do you have an idea what can cause this issue ? Before reverting to 6.1.7. (Or try to)
Below are some explanations.:
Before the update:
I had a working setup on DSM 6.1.7 with Jun's loader 1.02b for DS3615xs, that I wanted to update.
Specs are:
- Supermicro X8DTU-F with Intel ICH10R SATA 3.0Gbps Controller
- Two Intel Xeon 5560
- 32 GB Ram
- 6x 4TB DATA HDD drives connected to motherboard
- 4x 4TB SATA HDD drives connected to PCIe extension card
Made backup of really important files and of USB boot drive before applying update just in case.
Applying the update:
- Made the new usb boot drive with Jun's loader 1.03b for DS3615xs following this tutorial:
grub.cfg was updated with the same configuration I had on 6.1.7, as the usb drive is the same.
- Added extra drivers (not sure if they were really needed) from case 2 as explained here:
- Followed instructions on the upgrade, everything went fine, uploaded the correct .pat file for 6.2.2 and DSM went available, with correct name and one volume.