ziorufus

Solved! I don't know if my solution is the best one, but I changed my model (from DS3622xs+ to DS3615xs) and added manually the LAN driver. Then I could update to version 7.1.1 and everything started to work again. It is interesting to know whether there is a procedure to downgrade the DSM version after an unsuccessful update.

Hello! I've just updated my hp N36L to DSM 7.1-42661 Update 1 using TCRP bootloader and had no problems. Then I decided (sic!) to download 7.1-42661-4 and updated the DSM from the web interface by uploading the corresponding PAT file. Since the version number was the same, I would not have imagined a disaster. But the disaster happened. When I boot my DSM I got the "Welcome again" screen and a "Recover" button. I cannot do anything else, I have just this button (see screenshot, in Italian). When I press it, the system did something and reboot again, giving the same screen. I tried to enter the TCRP interface and run the "postupdate" command, but it seems that the last available update is 3 (and not 4), and I continue to get that screen. Is there a way to solve this issue, eventually reinstalling DSM 7.1-42661 Update 1? I'd like to do this without losing the data in the disks. Thank you for your help.

My problem is that Jun's Loader v1.03b DS3615xs loads until the black screen but then I do not see the computer on the network. If I try with the same identical vid/pid/sn/mac on v1.02b, it works perfectly. The problem is that the v1.02b does not work with DSM 6.2 (at least this is written on the documentation, I have not tried actually).

I'm using the built-in network card. Do you think the problem is the network card or the AMD processor?

You're a lucky boy

It's already disabled

I have the same problem on my N36L.

Is there any chance to have DSM 6.2 working on a hp N36L (AMD processor)? I tried every version from 1.03b to 1.04b without luck. The last working version is 1.02b with DSM 6.1.

Devo trovare un computer con Windows Però proverò: in effetti è un tentativo che non ho fatto e che vale la pena fare.

Con la versione 1.01 sono riuscito a installare DSM 6.0.2. Poi ho provato a far partire il bootloader 1.02b ma non parte (pur impostando correttamente i dati di chiavetta USB e scheda di rete).

You are using the original v1.02b, aren't you? There are no patches or tricks to make it works, apart from the information in the grub.cfg file, right?

Already tried: I've changed both the USB stick and the USB port on the server (using an external one). It's so disappointing! If I use the same stick with the old img using the same configuration everything works well

Yes, I double checked and they are the correct. The Mac address is correct, too. I only have a doubt on the serial number: I used one found around on the web. How can I set it correctly?

Now I cannot reboot it because I'm copying some files. Is there a way to get this information from the interface?

It does not work After booting it, the DiskStation is not appearing on the SynologyAssistant. Are you sure I can use the v1.02b as is?

Is it compatible with AMD? For what I understand, the only version compatible with AMD is JunsMod102a-test-NICadd (that should work with DSM 6.1).

I need to buy one, and I can do it. The weird thing is that I can boot without any problem using the old Jun loader. How this can be explained? Is it normal that a change in the bootloader will result in a change in how it can recognise the ethernet chip?

Do you mean install a physical new Ethernet card, a PCI one?

Already done (you mean C1E, don't you?)

I forgot to thank you Unfortunately, I could not load it into my N36L.

Does anyone install the 6.1.3 update 4 on a N36L? I tried the JunsMod102a-test-NICadd loader, but I cannot see the device with the Synology Assistant. For now, I'm stuck at 6.0.2-8451. Thanks!

The link to JunsMod102a-test-NICadd.img seems down. Does anyone have it and can upload it again anywhere?

Buondì, qualcuno è riuscito a installare DSM >= 6.1 su HP MicroServer? Io ho fatto varie prove (anche modificando la chiavetta secondo quanto suggerito da Jun), ma senza successo. In pratica riesco a far partire la chiavetta (modificando la zImage), ma poi non lo trovo con l'Assistant. Qui c'è il tutorial: Il terzo post (di Jun) è quello che spiega come aggiornare su AMD. Grazie!

Qualcuno è quindi riuscito a installare la 6.1? Per quanto ho visto io, con processore AMD (quello del MicroServer) è un macello. Fatemi sape'!