emkookmer
-
Posts
24 -
Joined
-
Last visited
Everything posted by emkookmer
-
XPenology on HP DL 380 G5 (smart array P800)
emkookmer replied to dj-life's topic in DSM 5.2 and earlier (Legacy)
I have a HP DL360 G7 and i had the same problem. in the end I ended up replacing the HP smart array 410 controller with a LSI SAS 9207-8i (SKU : LSI00302 | EAN : 0830343006892 ) -
Then again, maybe its posible to make a bootloader for SRM just like DSM It wouldnt surprise me that with few adjustments @jun is able to make his bootloader suitable. The pat files are also downloadable https://global.download.synology.com/download/SRM/release/1.1.5/6542/SRM_RT2600ac_6542.pat
-
And as far as i know for all drives
-
You might want to read this kb artikel from synology
-
In the tutorials section of the forum you'll find everything you need.
-
QuickConnect Alternative with"relay" feature?
emkookmer replied to kaku's topic in Packages & DSM Features
If that's not possible, then you can setup a reverse ssh tunnel -
HP DL360 is working with u8
-
@Polanskiman this should be moved to tutorials and maybe even pinned
-
Besoin d'aide a configurer GateOne - DSM 6.1.3
emkookmer replied to xpeno1's topic in Paquets, mods & fonctionnalités DSM
And now in english please -
Disk volume not expanding in raid 6 setup
emkookmer replied to arrush's question in General Questions
A small correction; I ment the DS916+ image from @jun found on his mirror Btw did you also expand the volume? -
Disk volume not expanding in raid 6 setup
emkookmer replied to arrush's question in General Questions
it is because your are using RAID 6 it will look at the smallest drive in you raid setup and use that size * the amount of drives. in your case 1.82Tb * 4 (the other 2 are parity with raid 6) = ~7.28Tb. The remaining space (~5Tb) is not used. you might want to look into SHR, but your DSM doesn't support it. Perhaps you may consider switching to DS917 -
DSM - Sorry, the page you are looking for is not found
emkookmer replied to Matty123's question in General Questions
Did you try rebooting your machine? sudo reboot -
Hi Robert, You can go baremetal with xpenology, so basicly you can use any hardware as long as the drivers are present. you can search the forum for the lists of supported hardware. i'm using a HP DL360 G7 (2cpu, 8cores, 16 threads and 44Gb ram) with a LSI SAS 9207-8i (SKU : LSI00302 | EAN : 0830343006892 ) and i'v bonded all 4 network interfaces into one. and this setup works perfect. as for the filesystem, any particular reason that you want to use ZFS? (BTW there is BTRFS support)
-
If you want to install DSM 6.1, simply follow this tutorial
-
Strange idea/question : Would it be possible
emkookmer replied to emkookmer's question in Answered Questions
So basically this is going to be out of the question in the future. Oh well too bad, i was hoping to get a XPEnology running on AWS EC2, but with the major Linux distro only being supported and the DSM "appliance" not being able to be ported, this is will not work. thanks anyway @IG-88 -
Would ir be possible to install DSM (the application) in a different Linux distro, like Debian or Red Hat.
-
this is a little bit true, but with the extra.lzma that you provided the hard drives where detected, but could not be formatted. This was due to the hardware raid controller (P410i) forcing to use a raid configuration. I've read up on the P410i and it turns out that other systems (FreeNAS filesystem ZFS) have had the same problems. anyway i just replaced the controller with a supported one and i'm set to go now.
-
The HP Smart Array P410i force you to create a raid array/primary partition, with this you will not be able to install XPEnology. I've replaced the HP smart array 410 controller with a LSI SAS 9207-8i (SKU : LSI00302 | EAN : 0830343006892 ) with this i'm able to access my drives now.
-
I've replaced the HP smart array 410 controller with a LSI SAS 9207-8i (SKU : LSI00302 | EAN : 0830343006892 ) with this i'm able to access my drives now.
-
Tutorial: Install/Migrate DSM 5.2 to 6.1.x (Jun's loader)
emkookmer replied to Polanskiman's topic in Tutorials and Guides
Which model are you running on? Because on my DL360 G7 i'm getting the following error, when I try to install/format -
this one works, both the network cards and the SAS controller are recognized. but then i get the same error as @cseb and this suggestion from @mckaycr doesn't work. next step will be trying a differen hard drive, becuase right now i'm using the original 10k SAS drives. If all else fails i'll replace the sas controller with on that support JBOD
-
Hi cseb, Could you share your extra.lzma with the hpsa.ko driver? I'm in need of the same drivers for my HP DL360 G7 Thanks
-
i know what I did wrong, and it's a read facepalm..... anyway i got a little bit further, it seems my logical drive (smart array P410i) is not recognized. my guess would be that the drivers are not loaded, but is should be supported: I even added Polanskiman's Extra.lzma custom ramdisk , but still no luck as it doesn't contain hpsa.ko How do I enabled these drivers.
-
Hi Guys, This maybe a stupid question, but i want to try and install xpenology on a HP DL360 G7. Now i have installed Jun's loader 1.02a2 on usb and it boots from it, after the boot it says to find the machine through find.synology.com, but it's not found. What am I doing wrong? @jun would it be possible to show the IP's on the boot screen? FYI, the machine is powered on and connected to my network