jemyzhang
-
Posts
8 -
Joined
-
Last visited
Everything posted by jemyzhang
-
I bought an Intel e1000e eth and installed on ASRock J3160, disabled the onboard ether, and boot up to 6.1.3, working well. And I thought I could upgrade to 6.2, but after upgrade done, e1000e never brought up, and I could not connect to my nas anymore. Is there any thing I forgot before upgrading to 6.2? Or is there any way that I could reinstall without losing any data?
-
I checked with multimeter, and according to manual, the ribbon cable is correct, but the output voltage was weird, I remember the tx was about 0.8v, and rx was about 0.1v.
-
@jun Any way that we can put the boot log to the screen for the debug purpose? I failed to add rs232 connector to the com header of the motherboard, seems the output voltage is not correct, maybe the rs232 circuit was broken.
-
- Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.5 - Loader version and model: JUN'S LOADER v1.02b - DS916+ - Using custom extra.lzma: - Installation type: ASRock J3160 - Additional comments: REBOOT REQUIRED
-
Problem solved, it is about the SN, I set the SN to the real-DS916+, and the hardware transcoding worked perfectly. Please refer to the following post. cat /usr/syno/etc/codec/activation.conf {"success":true,"activated_codec":["h264_dec","h264_enc"],"token"xxxxx"}
- 6 replies
-
- 1
-
-
- hadware transcoding
- j3160
- (and 1 more)
-
I read the post, means there's currently no way to enable hardware transcoding on non-synology-hardware?
-
qsv means use CPU encoder instead of gpu? so I should build ffmpeg qsv to replace the builtin ffmpeg? I will try that. thanks! 通过我的 ONEPLUS A3000 上的 Tapatalk发言
-
After transferred from DS3617 to DS916+, I'm not able to play video if the video transcoding is enabled. And even there's no ffmpeg process while I trying to play video. Previously there's no problem with DS3617 installed. Is that related to the hardware transcoding issue? And how can I debug into this issue? I tried with the following command without problem, except that the cpu loading is still high(4 cores with 99%). /var/packages/VideoStation/target/bin/ffmpeg-vaapi -hwaccel nvenc -i /volume2/video/test.mov -c:v h264 -preset:v faster /tmp/out.qsv.mp4