khile

would you be able to share your XML file as i cant get 6.2 to show up on unraid 6.8.1 no matter what i do using loader 1.04b and selecting vm option never appears on network

Due to health issues and a C&D letter i will no longer be providing updates.

Tried on 3 units all updated without issue

Your options are to either install on a clean formated hdd and if you need files off other hdd load it up in a Linux live cd and copy over. I will update to version 1.02b over weekend

I've been running it full time for two week and my uptime is nearly 15 days not had a single crash or issue it's had a moderate load at times. Only issue I have experience is a slight disconnect from network I'm logging data to see if it's an issue with the firmware files for nic or a network issue my end I believe it's an issue my end with router but I will confirm after more testing.

https://usdl.synology.com/download/DSM/release/6.1/15047/DSM_DS3615xs_15047.pat

once the bootloader is on the usb stick choose force install this will allow the server to be found on the network, from there update the dsm to 6.1 then when it restarts let the bootloader load first option (dont select amd) first boot may take 5-10 mins to show up

I'm working on getting to work migrating with limited success 5.2 dsm to 6.1 works fine and will ask you to migrate after but if your on version 6.0.2 the it not working correctly always sometimes it will migrate others it does not apper to find server options Wipe hdd with dsm on or find another hdd and install that as primary hdd

the c1e setting when on allows the cpu to throttle back when not in use but synology software does not like it and if you manage to boot it usually freezes or hangs when the c1e even occurs there are a few options depending on your setup this is my setup 4 hard drivers the 1st one is solely for xpenology the boot partition, all files and programs go on there the other 3 hdd are where i store all my files moves,tv etc now if all yours are on one hdd then you are limited you could buy or source a cheap hdd and install xpenology on that then use linux to delete partition off the original hdd

A few people have said they only got it to work as a new/clean install im looking into it but that may be an option

Have you disabled c1 support as DSM_DS3615xs_15132 is supported if you follow my guide it has been tested on n36l alway up to the n54l and all work. 1) Make sure c1 is disabled in bios. 2) Select force install (install pat) 3) one reboot select top option (dont select amd) 4) give it time 5-10 mins to come up (mine took around 10 mins first time) any issues please post back

this was done as added a few extra modules/firmware and drivers. some network modules where freely available online and included to have maximum comparability

disabled audio- and videotranscoding in the mediaserver settings (via the webinterface) fai;ing that then maybe a clean install is only way

mem_default_mb 4096 mem_max_mb 32768 change both to show 16384

I've no idea I had an issue on one of my xpenology boxes showing wrong ram I changed settings above and all was well. Possibly the system was doing something when you restarted?

Give these a try Change memory settings in /etc/synoinfo.conf and /etc.defaults/synoinfo.conf for extra memory this is required in mb default should look like below once changed and saved restart mem_default_mb 4096 mem_max_mb 4096

Have you edited file to give it a mac and serial number and correct VID and PID? if they are not done or are incorrect it will not boot

ok try to reboot and select the amd option see if that works for you

is this a real machine or a vm? can you walk me though steps you did?

did you disable c1 support in bios?

yes please disable the C1E Support in the BIOS setup

Hi yes this is just initial release once there is enough confirmed working I will update

I forgot to mention disable c3 support in bios as it's interfering with setup this MUST be done

Ok let's check a few things 1) try booting with no disks connected just usb drive 2) are you using internal usb or external? I used internal 3) have you tried either find.synology.com or the Synology assistant 4) on first boot you must select force install and make sure no old loader is on usb drive or partition

Yes force install first time round and find your xpenology on network and load the DSM file allow it to go though the setup and once completed it will restart and just allow it to boot of the first option you dont have to select the amd option, first boot on my n36l took longer than expected possibly 5 mins but after initial time it generally loads up in about 30 seconds. Good luck if you have any issues let me know