bradmax57

It was reserved but removing it has done nothing as has resetting bios, I'm at a complete loss now, cant understand why it would work fine previously but its no longer seen by synology assistant......... EDIT: I recreated a 5.2 XPEnoboot disk and it popped straight up so its obviously something I'm doing wrong creating the usb stick for 6.0.2 but following the guide to the T and not getting any errors when it boots

I think the IP address maybe reserved, I will check again later thanks again

hmmmm formatted both hard drives, re created my usb stick, changing the uid and cid, serial and mac code as per the guide, booted the microserver selected amd baremetal and again cannot see the xpenology in synology assistant......?

very odd I cant see either..... ohwell after almost a week of copying data across (for some reason the transfer speeds are hiddous in ubunto?) I'm almost done so will just do a fresh install I think

Polanskiman wrote: mervincm wrote: Is the data important or do you just want to start over? in any case you can try 6.1, you can always grab another USB key, write the IMG again, and try from that. While working on a seperate issue, I build a functional 6.11U4 system quite simply. for the 6.02 guide , but using the 1.02a IMG, the DSM version you need to download was listed in the synology assistant after you boot from the stick. The other key was to fix the PID/VID using the "boot from stick, hit C to launch command prompt, pid command, pid 0x(your 4 digits),vid command, vid 0x(your 4 digits) hit esc, then continue to boot. after that it will install and there was no issue upgrading it to 6.1.1U4. (well I STILL have a problem using 10gigabyte NICs, but so far no issue with 1gigabyte NICs) System and data are in two separate partition. Starting over will have no effect on data. bradmax57 wrote: Tried several cables directly to my router and cant even see it as an attached device any longer..... wonder if the LAN has died? lights are still flickering away on it 1st option: try accessing the system partition following this guide: viewtopic.php?f=2&t=30805 and then copy the content of /lib/modules/update to /lib/modules (if you know the module of your NIC then copying that module only will do) 2nd option: if the above doesn't work and if you don't mind reinstalling all your apps and configuring them again, I would recommend you to wipe the system partition and reinstalling DSM again. I don't know exactly what you did before but doing as I said will certainly be faster than troubleshooting this for days. When I try and copy the content of /lib/modules/update to /lib/modules I'm getting failures "Error while copying alx.ko There was an error copying the file into /media/Ubuntu/1.42.6-5644/lib/modules Show more details Error opening file /media/Ubuntu/1.42.6-5644/lib/modules/alx.ko':Permission denied Any ideas?? Could you tell me which is the system partition to wipe if all else fails?

Ok making some progress I can see the data and folders using a live cd usb pen, bad news Is I don't have anything to backup all the data with, I guess I'll have to go and get a portable hdd

OK will take a look later thanks again I just thought I'd at least be able to see it connected as a device on my router, is there a guide to option 2? as I cant see my nas I cant reinstall? *edit* cant even get a live cd to boot from usb, its just hanging with a flashing white curser..... maybe I need a new usb stick, said it had created it successfully.

I certainly don't mind re-installing apps etc but thought that's what I had already tried recreating my USB drive? Followed your guide for using Jun's loader for 6.0.2 changing vid and pid along with serial and mac booted from USB selected option 4 (amd bare metal) and all appears normal just can't see diskstation at all to even to reinstall dsm, will try connecting it directly to router later to see if that helps

Tried several cables directly to my router and cant even see it as an attached device any longer..... wonder if the LAN has died? lights are still flickering away on it

Thanks Guys, I've tried another usb stick following the guide again for 6.0.2 everything seems to go ok until I start searching for the nas using sinology assistant when all it says is no server can be found

Hi for some reason my user account had gone (maybe I hadn't posted in so long) anyway I've got a bit of an issue with my 6.0.2 Build, all has been fine using juns loader 1.01 I think it was, I updated the dsm earlier (was set for only critical updates) to the latest 6.0.2 version, it then came up as migratable using synology assistant so got the matching version DSM_DS3615xs_8451 and installed that, now I cant see the nas at all, its stuck on booting the kernel (Microserver N54L) Its booting on the 5th option for the loader (DS3615xs 6.02 baremetal amd with jun's mod v1.01 I didn't want to try 6.1 as I've read it might not be fully compatible, any ideas where to start? Thanks