Jump to content
XPEnology Community

maikst

Member
  • Posts

    16
  • Joined

  • Last visited

Everything posted by maikst

  1. Keine Ahnung ob der Chipsatz auch bei XPEnology unterstützt wird. Es gibt bis jetzt keine Liste der unterstützten Chipsätze. Lediglich NEC scheint auf jeden Fall zu funktionieren. Nimm die Karte aus dem ersten Beitrag, ist günstiger und kauf für das gesparte Geld ein Kabel das Du nach vorne führst... wenn das denn nötig sein sollte. VG Maik
  2. das gleiche passiert auch mit einem HP ML110 G7 Bios jedesmal wieder auf Standard... Neben diesem Effekt, den File system errors die plötzlich mal auftauchen (neue HDs) und der Tatsache, dass nach einem rsync kein Laufwerk mehr erreichbar ist.... mein Fazit: das Teil ist leider nicht für produktiv Einsatz geeignet.
  3. rsync backup durchgeführt... erfolgreich. danach war kein laufwerk mehr online... erst nach einem neustart alles wieder vorhanden.. kein log eintrag nochmal durchgeführt und wieder das gleiche ergebnis. ich trau dem ding immer weniger
  4. New problem.... I tried ít twice. Made a backup via rsync... which worked. but after is was ready no share were available anymore... df shows no drive.. after a reboot everything looks ok. no entry in any log so, after the file system errors is this the next curious error
  5. maikst

    file system error

    Hab die beiden Updates von 5.0 raufgespielt... ging mit diesem Tip: Noch keine neuen File Errors, aber ich lese im Moment auch nur... geschrieben wird auf dem nicht.
  6. den Eindruck hab ich auch... hab das gleiche bei meinem ML110 G7 beobachtet.
  7. Fine picture... Press F1 and boot. Shutdown the system... boot again and if options are dropped again.... do what your system wants... replace the battery on the mainboard.
  8. Errors are found in this part of dmesg Here is the second part of the complete dmesg files [ 16.240430] md: Autodetecting RAID arrays. [ 16.292783] md: invalid raid superblock magic on sda3 [ 16.292788] md: sda3 does not have a valid v0.90 superblock, not importing! [ 16.356150] md: invalid raid superblock magic on sdb3 [ 16.356154] md: sdb3 does not have a valid v0.90 superblock, not importing! [ 16.380579] md: invalid raid superblock magic on sdc3 [ 16.380584] md: sdc3 does not have a valid v0.90 superblock, not importing! [ 16.380595] md: Scanned 9 and added 6 devices. [ 16.380597] md: autorun ... [ 16.380599] md: considering sda1 ... [ 16.380606] md: adding sda1 ... [ 16.380609] md: sda2 has different UUID to sda1 [ 16.380613] md: adding sdb1 ... [ 16.380616] md: sdb2 has different UUID to sda1 [ 16.380620] md: adding sdc1 ... [ 16.380623] md: sdc2 has different UUID to sda1 [ 16.380634] md: created md0 [ 16.380636] md: bind [ 16.380654] md: bind [ 16.380665] md: bind [ 16.380675] md: running: [ 16.380874] bio: create slab at 1 [ 16.380962] md/raid1:md0: active with 3 out of 12 mirrors [ 16.380992] md0: detected capacity change from 0 to 2549940224 [ 16.381090] md: considering sda2 ... [ 16.381095] md: adding sda2 ... [ 16.381098] md: adding sdb2 ... [ 16.381102] md: adding sdc2 ... [ 16.381784] md: created md1 [ 16.381787] md: bind [ 16.381798] md: bind [ 16.381809] md: bind [ 16.381819] md: running: [ 16.383696] md/raid1:md1: active with 3 out of 12 mirrors [ 16.383723] md1: detected capacity change from 0 to 2147418112 [ 16.384375] md: ... autorun DONE. [ 16.384523] md1: unknown partition table [ 16.410353] synobios: load, major number 201 [ 16.410359] Brand: Synology [ 16.410361] Model: DS-3612xs [ 16.410365] set group disks wakeup number to 4, spinup time deno 7 [ 16.925259] synobios: unload [ 16.955452] md0: unknown partition table [ 19.329768] EXT4-fs (md0): barriers disabled [ 19.370872] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 22.578671] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 23.342076] EXT4-fs (md0): re-mounted. Opts: (null) [ 34.423828] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 34.449897] zram: module is from the staging directory, the quality is unknown, you have been warned. [ 34.463362] zram: Creating 2 devices ... [ 34.470207] Adding 1840124k swap on /dev/zram0. Priority:1 extents:1 across:1840124k SS [ 34.475124] Adding 1840124k swap on /dev/zram1. Priority:1 extents:1 across:1840124k SS [ 35.257750] usbcore: registered new interface driver usbfs [ 35.259482] usbcore: registered new interface driver hub [ 35.263235] usbcore: registered new interface driver ethub [ 35.265836] usbcore: registered new device driver usb [ 35.652078] fuse init (API version 7.17) [ 35.675550] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 35.675554] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 35.675559] Error: Driver 'e1000e' is already registered, aborting... [ 35.699220] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [ 35.699223] Copyright (c) 2007-2011 Intel Corporation. [ 35.699229] Error: Driver 'igb' is already registered, aborting... [ 35.755702] Btrfs loaded [ 35.793114] synobios: load, major number 201 [ 35.793119] Brand: Synology [ 35.793121] Model: DS-3612xs [ 35.793125] set group disks wakeup number to 4, spinup time deno 7 [ 36.851967] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 37.043791] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 38.396280] md: md2 stopped. [ 38.437189] md: bind [ 38.450166] md: bind [ 38.450968] md/raid1:md2: active with 2 out of 2 mirrors [ 38.450999] md2: detected capacity change from 0 to 1995563270144 [ 38.451515] md2: unknown partition table [ 38.473246] md: md3 stopped. [ 38.474449] md: bind [ 38.477124] md/raid1:md3: active with 1 out of 1 mirrors [ 38.477157] md3: detected capacity change from 0 to 3995951366144 [ 38.494577] md3: unknown partition table [ 39.977979] e1000e_new: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 39.981996] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 41.362660] EXT4-fs (md2): barriers disabled [ 41.575146] EXT4-fs (md2): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 42.109470] EXT4-fs (md3): barriers disabled [ 42.207182] EXT4-fs (md3): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc [ 43.250573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 43.250610] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 43.250698] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 43.250703] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 43.250727] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 43.250756] ehci_hcd 0000:00:1a.0: debug port 2 [ 43.254636] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 43.254658] ehci_hcd 0000:00:1a.0: irq 21, io mem 0xfacc0000 [ 43.264023] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 43.264314] hub 1-0:1.0: USB hub found [ 43.264320] hub 1-0:1.0: 2 ports detected [ 43.265000] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 43.265035] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 43.265039] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 43.265050] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 43.265077] ehci_hcd 0000:00:1d.0: debug port 2 [ 43.268957] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 43.268977] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xfacb0000 [ 43.278011] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 43.279017] hub 2-0:1.0: USB hub found [ 43.279025] hub 2-0:1.0: 2 ports detected [ 43.334534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 43.363458] xhci_hcd 0000:0d:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 43.363510] xhci_hcd 0000:0d:00.0: setting latency timer to 64 [ 43.363516] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 43.363529] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 3 [ 43.368956] xhci_hcd 0000:0d:00.0: irq 18, io mem 0xfbff0000 [ 43.369039] xhci_hcd 0000:0d:00.0: irq 48 for MSI/MSI-X [ 43.369046] xhci_hcd 0000:0d:00.0: irq 49 for MSI/MSI-X [ 43.369053] xhci_hcd 0000:0d:00.0: irq 50 for MSI/MSI-X [ 43.370060] xHCI xhci_add_endpoint called for root hub [ 43.370064] xHCI xhci_check_bandwidth called for root hub [ 43.372673] hub 3-0:1.0: USB hub found [ 43.372692] hub 3-0:1.0: 4 ports detected [ 43.375909] xhci_hcd 0000:0d:00.0: xHCI Host Controller [ 43.375918] xhci_hcd 0000:0d:00.0: new USB bus registered, assigned bus number 4 [ 43.380635] xHCI xhci_add_endpoint called for root hub [ 43.380639] xHCI xhci_check_bandwidth called for root hub [ 43.384545] hub 4-0:1.0: USB hub found [ 43.384562] hub 4-0:1.0: 4 ports detected [ 43.539909] uhci_hcd: USB Universal Host Controller Interface driver [ 43.539973] uhci_hcd 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 43.540075] uhci_hcd 0000:01:00.4: setting latency timer to 64 [ 43.540080] uhci_hcd 0000:01:00.4: UHCI Host Controller [ 43.540093] uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 5 [ 43.540114] uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports [ 43.540158] uhci_hcd 0000:01:00.4: irq 16, io base 0x00002000 [ 43.549302] hub 5-0:1.0: USB hub found [ 43.549313] hub 5-0:1.0: 2 ports detected [ 43.593163] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 43.727744] Got empty serial number. Generate serial number from product. [ 43.745316] Initializing USB Mass Storage driver... [ 43.753632] hub 1-1:1.0: USB hub found [ 43.753706] hub 1-1:1.0: 6 ports detected [ 43.763134] usbcore: registered new interface driver usb-storage [ 43.763138] USB Mass Storage support registered. [ 43.851780] usbcore: registered new interface driver usblp [ 43.897090] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 44.032287] Got empty serial number. Generate serial number from product. [ 44.032296] drivers/usb/core/hub.c (2154) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0 [ 44.038288] usbcore: registered new interface driver usbhid [ 44.038292] usbhid: USB HID core driver [ 44.052565] hub 2-1:1.0: USB hub found [ 44.052632] hub 2-1:1.0: 6 ports detected [ 44.336600] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd [ 44.435121] scsi4 : usb-storage 2-1.3:1.0 [ 44.519320] usb 2-1.5: new low-speed USB device number 4 using ehci_hcd [ 44.624318] Got empty serial number. Generate serial number from product. [ 44.629986] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input2 [ 44.630018] generic-usb 0003:04F2:0111.0001: input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.5/input0 [ 44.645056] input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input3 [ 44.645084] Get empty minor:104 [ 44.646510] generic-usb 0003:04F2:0111.0002: input,hiddev0: USB HID v1.10 Device [CHICONY USB Keyboard] on usb-0000:00:1d.0-1.5/input1 [ 44.757824] uhci_hcd 0000:01:00.4: Controller not stopped yet! [ 45.437501] scsi 4:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0 [ 45.443873] syno_disk_type_get: disk driver 'usb-storage' [ 45.449056] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 45.791039] sd 4:0:0:0: [sdu] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB) [ 45.791784] sd 4:0:0:0: [sdu] Write Protect is off [ 45.791789] sd 4:0:0:0: [sdu] Mode Sense: 03 00 00 00 [ 45.792554] sd 4:0:0:0: [sdu] No Caching mode page present [ 45.792557] sd 4:0:0:0: [sdu] Assuming drive cache: write through [ 45.795786] sd 4:0:0:0: [sdu] No Caching mode page present [ 45.795790] sd 4:0:0:0: [sdu] Assuming drive cache: write through [ 45.804645] sdu: sdu1 [ 45.807548] sd 4:0:0:0: [sdu] No Caching mode page present [ 45.807552] sd 4:0:0:0: [sdu] Assuming drive cache: write through [ 45.807555] sd 4:0:0:0: [sdu] Attached SCSI removable disk [ 48.976744] netlink: 12 bytes leftover after parsing attributes. [ 50.223652] eth0: no IPv6 routers present [ 50.610469] ata1.00: configured for UDMA/133 [ 50.613437] ata1.01: configured for UDMA/133 [ 50.613443] ata1: EH complete [ 50.634504] ata1.00: configured for UDMA/133 [ 50.635522] ata2.00: configured for UDMA/133 [ 50.635528] ata2: EH complete [ 50.637392] ata1.01: configured for UDMA/133 [ 50.637397] ata1: EH complete [ 53.006752] init: smbd main process (19919) killed by HUP signal [ 53.006787] init: smbd main process ended, respawning [ 53.119829] init: synoindexd main process (19753) killed by USR2 signal [ 53.119858] init: synoindexd main process ended, respawning [ 80.257577] loop: module loaded [ 80.896254] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 100.369260] dsmnotify.cgi[22254]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbe5180 error 6 [ 100.428245] storagehandler.[22255]: segfault at 0 ip 000000000809e298 sp 00000000ff9d8690 error 6 [ 130.561730] dsmnotify.cgi[22465]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd1cb70 error 6 [ 160.971473] dsmnotify.cgi[22505]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc34180 error 6 [ 191.753321] dsmnotify.cgi[22627]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcbcd90 error 6 [ 222.253597] dsmnotify.cgi[22668]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc9ae70 error 6 [ 252.362289] dsmnotify.cgi[22769]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8ccab0 error 6 [ 282.838541] dsmnotify.cgi[22810]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdbc120 error 6 [ 313.507618] dsmnotify.cgi[22911]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe7ded0 error 6 [ 344.123707] dsmnotify.cgi[22958]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe39a00 error 6 [ 374.893040] dsmnotify.cgi[23053]: segfault at 0 ip 000000000804ccb8 sp 00000000ffff1cd0 error 6 [ 405.520313] dsmnotify.cgi[23101]: segfault at 0 ip 000000000804ccb8 sp 00000000ff894300 error 6 [ 436.229351] dsmnotify.cgi[23197]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb07f30 error 6 [ 466.871983] dsmnotify.cgi[23245]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbfa6c0 error 6 [ 497.852043] dsmnotify.cgi[23340]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc44470 error 6 [ 528.449840] dsmnotify.cgi[23387]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9eb540 error 6 [ 559.749094] dsmnotify.cgi[23481]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe35fa0 error 6 [ 591.313468] dsmnotify.cgi[23527]: segfault at 0 ip 000000000804ccb8 sp 00000000ff87dc80 error 6 [ 622.353336] dsmnotify.cgi[23622]: segfault at 0 ip 000000000804ccb8 sp 00000000fff44500 error 6 [ 653.612985] dsmnotify.cgi[23662]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9c9a80 error 6 [ 684.667941] dsmnotify.cgi[23756]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbe9910 error 6 [ 715.762747] dsmnotify.cgi[23801]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc73210 error 6 [ 746.840590] dsmnotify.cgi[23897]: segfault at 0 ip 000000000804ccb8 sp 00000000ffba5240 error 6 [ 777.950486] dsmnotify.cgi[23944]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd2a6a0 error 6 [ 809.023606] dsmnotify.cgi[24007]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd71b00 error 6 [ 840.139881] dsmnotify.cgi[24084]: segfault at 0 ip 000000000804ccb8 sp 00000000fffa6dd0 error 6 [ 871.207591] dsmnotify.cgi[24120]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9a7370 error 6 [ 902.364215] dsmnotify.cgi[24224]: segfault at 0 ip 000000000804ccb8 sp 00000000ff963ad0 error 6 [ 933.465680] dsmnotify.cgi[24259]: segfault at 0 ip 000000000804ccb8 sp 00000000fff59650 error 6 [ 964.837447] dsmnotify.cgi[24366]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc1e3a0 error 6 [ 995.906035] dsmnotify.cgi[24401]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd71490 error 6 [ 1027.745356] dsmnotify.cgi[24506]: segfault at 0 ip 000000000804ccb8 sp 00000000fffa7a90 error 6 [ 1052.026704] dsmnotify.cgi[24554]: segfault at 0 ip 000000000804ccb8 sp 00000000ffac0440 error 6 [ 1052.031698] dsmnotify.cgi[24555]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbcc5f0 error 6 [ 1052.096898] dsmnotify.cgi[24557]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc705c0 error 6 [ 1061.955579] storagehandler.[24578]: segfault at 0 ip 000000000809e298 sp 00000000ff86bdf0 error 6 [ 1062.736939] storagehandler.[24672]: segfault at 0 ip 000000000809e298 sp 00000000ffa7aeb0 error 6 [ 1074.077299] storagehandler.[24840]: segfault at 0 ip 000000000809e298 sp 00000000fff52bb0 error 6 [ 1082.504765] dsmnotify.cgi[24945]: segfault at 0 ip 000000000804ccb8 sp 00000000ff929580 error 6 [ 1085.301455] storagehandler.[24948]: segfault at 0 ip 000000000809e298 sp 00000000ffa316c0 error 6 [ 1096.183929] storagehandler.[25055]: segfault at 0 ip 000000000809e298 sp 00000000fffd4a20 error 6 [ 1107.241759] storagehandler.[25162]: segfault at 0 ip 000000000809e298 sp 00000000ff8008d0 error 6 [ 1113.508362] dsmnotify.cgi[25254]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa5e380 error 6 [ 1118.290022] storagehandler.[25271]: segfault at 0 ip 000000000809e298 sp 00000000ff92fba0 error 6 [ 1123.605322] storagehandler.[25363]: segfault at 0 ip 000000000809e298 sp 00000000ffe4c1c0 error 6 [ 1143.411403] storagehandler.[25511]: segfault at 0 ip 000000000809e298 sp 00000000ffd88b70 error 6 [ 1144.511646] dsmnotify.cgi[25551]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb7c5b0 error 6 [ 1175.004182] dsmnotify.cgi[25617]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc965d0 error 6 [ 1205.999369] dsmnotify.cgi[25723]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbe7d90 error 6 [ 2486.913266] ------------[ cut here ]------------ [ 2486.913277] WARNING: at drivers/ata/libata-core.c:5348 ata_qc_issue+0x51/0x371() [ 2486.913280] Hardware name: ProLiant ML110 G7 [ 2486.913282] Modules linked in: cifs udf isofs loop usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate hfsplus md4 hmac i2c_algo_bit fuse vfat fat chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree usbcore psnap p8022 llc usb_common zram(C) mpt2sas synoacl_ext4(P) synoacl_vfs(P) hptiop 3w_sas 3w_9xxx 3w_xxxx mv61xx(P) mvsas hpsa arcmsr aic7xxx aic79xx pm80xx(O) aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_inic162x sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pata_serverworks pata_oldpiix pata_sch pata_artop pata_atp867x pata_pdc202xx_old pata_pdc2027x pata_it821x pata_hpt3x2n pata_hpt37x pata_hpt366 pata_hpt3x3 pdc_adma pata_via pata_sil680 pata_rdc pata_ninja32 pata_netcell pata_marvell pata_jmicron pata_cmd64x pata_ali ata_generic iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4vf cxgb4 cxgb3 cxgb cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8169(O) r8168(O) 8139too 8139cp tg3(O) libphy b44(O) bnx2 mmc_core ssb(O) uio forcedeth ixgbe ixgb igb_new(O) ioatdma e1000e_new(O) e1000 e100 dca pcnet32 amd8111e tulip mdio mii container fan thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: bromolow_synobios] [ 2486.913432] Pid: 25779, comm: kworker/0:0 Tainted: P C O 3.2.40 #8 [ 2486.913435] Call Trace: [ 2486.913440] [] ? ata_qc_issue+0x51/0x371 [ 2486.913444] [] ? ata_qc_issue+0x51/0x371 [ 2486.913449] [] ? warn_slowpath_common+0x78/0x8d [ 2486.913454] [] ? ata_qc_issue+0x51/0x371 [ 2486.913458] [] ? ata_scsi_rw_xlat+0x13b/0x183 [ 2486.913462] [] ? ata_qc_reinit+0x6d/0x7d [ 2486.913465] [] ? ata_scsi_invalid_field+0x23/0x23 [ 2486.913468] [] ? ata_scsi_translate+0xda/0x10f [ 2486.913473] [] ? ata_scsi_queuecmd+0x3f/0x70 [ 2486.913479] [] ? scsi_dispatch_cmd+0x295/0x2fe [ 2486.913483] [] ? scsi_request_fn+0x4e7/0x516 [ 2486.913488] [] ? blk_queue_bio+0x28c/0x2b8 [ 2486.913492] [] ? generic_make_request+0x91/0xd0 [ 2486.913495] [] ? submit_bio+0xa6/0xaf [ 2486.913501] [] ? SYNOWakeUpTask+0xd1/0x100 [ 2486.913507] [] ? process_one_work+0x13e/0x208 [ 2486.913510] [] ? worker_thread+0xc0/0x167 [ 2486.913513] [] ? destroy_workqueue+0xe7/0xe7 [ 2486.913517] [] ? kthread+0x6a/0x72 [ 2486.913524] [] ? kernel_thread_helper+0x4/0x10 [ 2486.913528] [] ? kthread_bind+0x5c/0x5c [ 2486.913532] [] ? gs_change+0x13/0x13 [ 2486.913535] ---[ end trace e92bb8f7478ae631 ]--- [ 6153.478249] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 6153.478255] ata1.00: failed command: SMART [ 6153.478262] ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [ 6153.478263] res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout) [ 6153.478266] ata1.00: status: { DRDY } [ 6153.478277] ata1.00: hard resetting link [ 6153.782763] ata1.01: hard resetting link [ 6154.238124] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 6154.238140] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6154.250534] ata1.00: configured for UDMA/133 [ 6154.253449] ata1.01: configured for UDMA/133 [ 6154.253467] ata1: EH complete [ 6157.975645] init: logrotate main process (25891) terminated with status 1 [22832.799643] init: logrotate main process (26152) terminated with status 1 [92421.796452] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [92421.796458] ata1.00: failed command: SMART [92421.796465] ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [92421.796466] res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout) [92421.796470] ata1.00: status: { DRDY } [92421.796481] ata1.00: hard resetting link [92422.100957] ata1.01: hard resetting link [92422.556349] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [92422.556366] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [92422.568738] ata1.00: configured for UDMA/133 [92422.571651] ata1.01: configured for UDMA/133 [92422.571670] ata1: EH complete [127455.635622] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [127455.635628] ata1.00: failed command: WRITE DMA [127455.635635] ata1.00: cmd ca/00:02:08:00:90/00:00:00:00:00/e0 tag 0 dma 1024 out [127455.635637] res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout) [127455.635640] ata1.00: status: { DRDY } [127455.635651] ata1.00: hard resetting link [127455.940104] ata1.01: hard resetting link [127456.395473] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [127456.395490] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [127456.407852] ata1.00: configured for UDMA/133 [127456.410792] ata1.01: configured for UDMA/133 [127456.410801] ata1.00: device reported invalid CHS sector 0 [127456.410810] ata1: EH complete [127463.954793] init: logrotate main process (27275) terminated with status 1 [164508.622383] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [164508.622389] ata1.00: failed command: WRITE DMA [164508.622396] ata1.00: cmd ca/00:08:80:ff:4b/00:00:00:00:00/e0 tag 0 dma 4096 out [164508.622397] res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout) [164508.622400] ata1.00: status: { DRDY } [164508.622412] ata1.00: hard resetting link [164508.926903] ata1.01: hard resetting link [164509.382293] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [164509.382309] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [164509.394675] ata1.00: configured for UDMA/133 [164509.397594] ata1.01: configured for UDMA/133 [164509.397602] ata1.00: device reported invalid CHS sector 0 [164509.397611] ata1: EH complete [171691.878647] dsmnotify.cgi[27855]: segfault at 0 ip 000000000804ccb8 sp 00000000fff9fca0 error 6 [171692.642352] storagehandler.[27860]: segfault at 0 ip 000000000809e298 sp 00000000ff8d0680 error 6 [171713.470684] dsmnotify.cgi[28043]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9340d0 error 6 [171713.499660] dsmnotify.cgi[28045]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe18ba0 error 6 [171743.984500] dsmnotify.cgi[28090]: segfault at 0 ip 000000000804ccb8 sp 00000000fff105b0 error 6 [171760.300278] PkgSynoMan.cgi[28145]: segfault at 0 ip 0000000008060618 sp 00000000ffb57ff0 error 6 [171760.321503] PkgSynoMan.cgi[28144]: segfault at 0 ip 0000000008060618 sp 00000000ffcca120 error 6 [171782.331212] dsmnotify.cgi[28240]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe2eb90 error 6 [171818.723144] dsmnotify.cgi[28329]: segfault at 0 ip 000000000804ccb8 sp 00000000ffff6420 error 6 [171850.929029] dsmnotify.cgi[28473]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcaa3d0 error 6 [171881.154535] dsmnotify.cgi[28565]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc6c270 error 6 [171911.293094] dsmnotify.cgi[28661]: segfault at 0 ip 000000000804ccb8 sp 00000000fffa0950 error 6 [171941.527960] dsmnotify.cgi[28708]: segfault at 0 ip 000000000804ccb8 sp 00000000ffac6880 error 6 [171971.731328] dsmnotify.cgi[28804]: segfault at 0 ip 000000000804ccb8 sp 00000000ffafaa10 error 6 [172002.151729] dsmnotify.cgi[28852]: segfault at 0 ip 000000000804ccb8 sp 00000000ffff6180 error 6 [172032.469767] dsmnotify.cgi[28947]: segfault at 0 ip 000000000804ccb8 sp 00000000ffede340 error 6 [172062.653790] dsmnotify.cgi[28996]: segfault at 0 ip 000000000804ccb8 sp 00000000fff92040 error 6 [172093.107535] dsmnotify.cgi[29092]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbfbff0 error 6 [172123.611077] dsmnotify.cgi[29140]: segfault at 0 ip 000000000804ccb8 sp 00000000ff815fe0 error 6 [172153.719928] dsmnotify.cgi[29235]: segfault at 0 ip 000000000804ccb8 sp 00000000fff06ff0 error 6 [172183.794792] dsmnotify.cgi[29283]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9b6a00 error 6 [172214.088182] dsmnotify.cgi[29378]: segfault at 0 ip 000000000804ccb8 sp 00000000ff837150 error 6 [172244.432311] dsmnotify.cgi[29425]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8fa790 error 6 [172274.860156] dsmnotify.cgi[29485]: segfault at 0 ip 000000000804ccb8 sp 00000000ffff3820 error 6 [172305.095492] dsmnotify.cgi[29568]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa53410 error 6 [172335.230360] dsmnotify.cgi[29605]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd5db20 error 6 [172365.544689] dsmnotify.cgi[29714]: segfault at 0 ip 000000000804ccb8 sp 00000000ff98caf0 error 6 [172396.076217] dsmnotify.cgi[29752]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb5ac90 error 6 [172426.314761] dsmnotify.cgi[29858]: segfault at 0 ip 000000000804ccb8 sp 00000000fff3f5c0 error 6 [172456.724346] dsmnotify.cgi[29894]: segfault at 0 ip 000000000804ccb8 sp 00000000fffae2e0 error 6 [172487.165688] dsmnotify.cgi[30011]: segfault at 0 ip 000000000804ccb8 sp 00000000ffecd560 error 6 [172517.562346] dsmnotify.cgi[30047]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdf4a40 error 6 [172548.069551] dsmnotify.cgi[30171]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd5ae50 error 6 [172578.516242] dsmnotify.cgi[30207]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9220d0 error 6 [172609.267391] dsmnotify.cgi[30314]: segfault at 0 ip 000000000804ccb8 sp 00000000fff7ad40 error 6 [172639.694127] dsmnotify.cgi[30350]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcfaad0 error 6 [172670.406127] dsmnotify.cgi[30458]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd4b4e0 error 6 [172701.344681] dsmnotify.cgi[30545]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8c8960 error 6 [172732.101771] dsmnotify.cgi[30691]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc6a5d0 error 6 [172762.565339] dsmnotify.cgi[30727]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc11240 error 6 [172779.061359] storagehandler.[30749]: segfault at 0 ip 000000000809e298 sp 00000000ffd61460 error 6 [172779.843304] storagehandler.[30843]: segfault at 0 ip 000000000809e298 sp 00000000ffaa35a0 error 6 [172791.419261] storagehandler.[30971]: segfault at 0 ip 000000000809e298 sp 00000000ff9e7eb0 error 6 [172792.727506] dsmnotify.cgi[31110]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa8bb40 error 6 [172795.004883] storagehandler.[31079]: segfault at 0 ip 000000000809e298 sp 00000000ffe16810 error 6 [172823.643012] dsmnotify.cgi[31221]: segfault at 0 ip 000000000804ccb8 sp 00000000fff66d20 error 6 [172854.499605] dsmnotify.cgi[31280]: segfault at 0 ip 000000000804ccb8 sp 00000000fffec600 error 6 [172885.252971] dsmnotify.cgi[31375]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc24ba0 error 6 [172915.937273] dsmnotify.cgi[31423]: segfault at 0 ip 000000000804ccb8 sp 00000000ffecf710 error 6 [175432.831163] init: logrotate main process (31572) terminated with status 1 [178693.190537] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [178693.190543] ata1.00: failed command: SMART [178693.190550] ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in [178693.190551] res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout) [178693.190554] ata1.00: status: { DRDY } [178693.190565] ata1.00: hard resetting link [178693.495068] ata1.01: hard resetting link [178693.950455] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [178693.950472] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [178693.962833] ata1.00: configured for UDMA/133 [178693.965758] ata1.01: configured for UDMA/133 [178693.965776] ata1: EH complete [183753.550428] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [183753.550434] ata1.00: failed command: WRITE DMA [183753.550441] ata1.00: cmd ca/00:02:08:00:90/00:00:00:00:00/e0 tag 0 dma 1024 out [183753.550442] res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout) [183753.550445] ata1.00: status: { DRDY } [183753.550457] ata1.00: hard resetting link [183753.854928] ata1.01: hard resetting link [183754.310300] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [183754.310316] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [183754.322674] ata1.00: configured for UDMA/133 [183754.325613] ata1.01: configured for UDMA/133 [183754.325622] ata1.00: device reported invalid CHS sector 0 [183754.325630] ata1: EH complete [205088.161156] usb 2-1.5: USB disconnect, device number 4 [205165.972387] usb 4-4: new SuperSpeed USB device number 2 using xhci_hcd [205165.991870] scsi5 : usb-storage 4-4:1.0 [205166.999692] scsi 5:0:0:0: Direct-Access SAMSUNG HN-M101MBB 2AR1 PQ: 0 ANSI: 5 [205167.000057] syno_disk_type_get: disk driver 'usb-storage' [205167.000923] sd 5:0:0:0: [sdv] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [205167.002373] sd 5:0:0:0: [sdv] Write Protect is off [205167.002378] sd 5:0:0:0: [sdv] Mode Sense: 23 00 00 00 [205167.004043] sd 5:0:0:0: Attached scsi generic sg4 type 0 [205167.004091] sd 5:0:0:0: [sdv] No Caching mode page present [205167.004095] sd 5:0:0:0: [sdv] Assuming drive cache: write through [205167.011588] sd 5:0:0:0: [sdv] No Caching mode page present [205167.011592] sd 5:0:0:0: [sdv] Assuming drive cache: write through [205167.036677] sdv: sdv1 [205167.041022] sd 5:0:0:0: [sdv] No Caching mode page present [205167.041026] sd 5:0:0:0: [sdv] Assuming drive cache: write through [205167.041030] sd 5:0:0:0: [sdv] Attached SCSI disk [206044.868484] usb 2-1.6: new high-speed USB device number 5 using ehci_hcd [206044.966579] scsi6 : usb-storage 2-1.6:1.0 [206045.970245] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [206045.970594] syno_disk_type_get: disk driver 'usb-storage' [206045.971908] sd 6:0:0:0: [sdw] 3907024896 512-byte logical blocks: (2.00 TB/1.81 TiB) [206045.972775] sd 6:0:0:0: [sdw] Test WP failed, assume Write Enabled [206045.973653] sd 6:0:0:0: [sdw] Asking for cache data failed [206045.973656] sd 6:0:0:0: [sdw] Assuming drive cache: write through [206045.974994] sd 6:0:0:0: Attached scsi generic sg5 type 0 [206045.978271] sd 6:0:0:0: [sdw] Test WP failed, assume Write Enabled [206045.979144] sd 6:0:0:0: [sdw] Asking for cache data failed [206045.979149] sd 6:0:0:0: [sdw] Assuming drive cache: write through [206046.089020] sdw: sdw1 [206046.091347] sd 6:0:0:0: [sdw] Test WP failed, assume Write Enabled [206046.092776] sd 6:0:0:0: [sdw] Asking for cache data failed [206046.092779] sd 6:0:0:0: [sdw] Assuming drive cache: write through [206046.092783] sd 6:0:0:0: [sdw] Attached SCSI disk [206055.443860] EXT3-fs (sdw1): error: couldn't mount because of unsupported optional features (2c0) [206055.557487] EXT4-fs (sdw1): barriers disabled [206055.680572] EXT4-fs (sdw1): mounted filesystem with ordered data mode. Opts: nodelalloc,synoacl,data=ordered,oldalloc [209338.508730] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209338.754297] init: logrotate main process (1524) terminated with status 1 [209338.763741] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209338.833291] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209339.473873] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209339.515522] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209339.598755] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209339.648680] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209339.773480] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [209339.848356] EXT4-fs error (device md2): ext4_xattr_block_get:246: inode #1093: comm smbd: bad block 9526 [223929.345328] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [223929.345334] ata1.00: failed command: WRITE DMA [223929.345341] ata1.00: cmd ca/00:02:08:00:90/00:00:00:00:00/e0 tag 0 dma 1024 out [223929.345343] res 40/00:00:00:00:00/00:00:00:00:00/10 Emask 0x4 (timeout) [223929.345346] ata1.00: status: { DRDY } [223929.345357] ata1.00: hard resetting link [223929.649692] ata1.01: hard resetting link [223930.104841] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [223930.104857] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [223930.117201] ata1.00: configured for UDMA/133 [223930.120164] ata1.01: configured for UDMA/133 [223930.120172] ata1.00: device reported invalid CHS sector 0 [223930.120180] ata1: EH complete [224066.863014] dsmnotify.cgi[3314]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd06480 error 6 [224066.918016] storagehandler.[3315]: segfault at 0 ip 000000000809e298 sp 00000000ffc9d6e0 error 6 [224098.285096] dsmnotify.cgi[3608]: segfault at 0 ip 000000000804ccb8 sp 00000000ffebe3a0 error 6 [224129.804433] dsmnotify.cgi[3695]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc74bc0 error 6 [224161.440770] dsmnotify.cgi[3888]: segfault at 0 ip 000000000804ccb8 sp 00000000ffce13d0 error 6 [224170.433806] dsmnotify.cgi[3932]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa30630 error 6 [224170.455880] dsmnotify.cgi[3933]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc58fb0 error 6 [224170.504643] dsmnotify.cgi[3935]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa7e4a0 error 6 [224201.152900] dsmnotify.cgi[4030]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9566a0 error 6 [224231.309102] dsmnotify.cgi[4137]: segfault at 0 ip 000000000804ccb8 sp 00000000fffec490 error 6 [224263.131557] dsmnotify.cgi[4250]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbc1fb0 error 6 [224295.058377] dsmnotify.cgi[4395]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa4edc0 error 6 [224325.701320] dsmnotify.cgi[4492]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc3adc0 error 6 [224356.492544] dsmnotify.cgi[4637]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb027c0 error 6 [224388.147285] dsmnotify.cgi[4732]: segfault at 0 ip 000000000804ccb8 sp 00000000fff19bf0 error 6 [224418.958545] dsmnotify.cgi[4875]: segfault at 0 ip 000000000804ccb8 sp 00000000ff81e790 error 6 [224449.561853] dsmnotify.cgi[4970]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe1ed20 error 6 [224480.278569] dsmnotify.cgi[5113]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe2bed0 error 6 [224511.062178] dsmnotify.cgi[5208]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9936b0 error 6 [224541.761562] dsmnotify.cgi[5354]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8e4190 error 6 [224572.352708] dsmnotify.cgi[5449]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa21f00 error 6 [224602.982484] dsmnotify.cgi[5594]: segfault at 0 ip 000000000804ccb8 sp 00000000fffbf5a0 error 6 [224633.611032] dsmnotify.cgi[5690]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9fb330 error 6 [224664.598357] dsmnotify.cgi[5833]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe65830 error 6 [224695.206389] dsmnotify.cgi[5929]: segfault at 0 ip 000000000804ccb8 sp 00000000ff944ef0 error 6 [224726.101294] dsmnotify.cgi[6084]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcfe540 error 6 [224756.798380] dsmnotify.cgi[6179]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa00a50 error 6 [224787.234879] dsmnotify.cgi[6293]: segfault at 0 ip 000000000804ccb8 sp 00000000ffaffab0 error 6 [224818.082957] dsmnotify.cgi[6420]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc7f720 error 6 [224848.715200] dsmnotify.cgi[6507]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa8fe50 error 6 [224879.653710] dsmnotify.cgi[6661]: segfault at 0 ip 000000000804ccb8 sp 00000000ffeaedd0 error 6 [224910.086764] dsmnotify.cgi[6746]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbf3320 error 6
  9. HW HP ML110 G7 with 2 x 2TB HGST und 1x 4TB WD red... Hardware und HDDs are new. 5.0 installed from scratch. Installation worked but I get more and more file system errors... even when I do not use the server and it is idleing... Server was nearly not ussed during this week since installation. Actually I do trust the system anymore. dmesg in the attachment... There are some errors that I can not solve.... like these errors and a warning : [ 1143.411403] storagehandler.[25511]: segfault at 0 ip 000000000809e298 sp 00000000ffd88b70 error 6 [ 1144.511646] dsmnotify.cgi[25551]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb7c5b0 error 6 [ 1175.004182] dsmnotify.cgi[25617]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc965d0 error 6 [ 1205.999369] dsmnotify.cgi[25723]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbe7d90 error 6 [ 2486.913266] ------------[ cut here ]------------ [ 2486.913277] WARNING: at drivers/ata/libata-core.c:5348 ata_qc_issue+0x51/0x371() [ 2486.913280] Hardware name: ProLiant ML110 G7 Here is the first part of the complete dmesg files [ 0.000000] Linux version 3.2.40 (root@gnoboot) (gcc version 4.2.0) #8 SMP Sat Apr 5 10:56:54 CST 2014 [ 0.000000] Command line: sn=12345678 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000096400 (usable) [ 0.000000] BIOS-e820: 0000000000096400 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000f1e34000 (usable) [ 0.000000] BIOS-e820: 00000000f1e34000 - 00000000f1e3e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000f1e3e000 - 00000000f3fff000 (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000030bfff000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: HP ProLiant ML110 G7, BIOS J01 12/04/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x30bfff max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0F4000000 mask FFC000000 uncachable [ 0.000000] 1 base 0F8000000 mask FF8000000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] last_pfn = 0xf1e34 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000091000] 91000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000f1e34000 [ 0.000000] 0000000000 - 00f1e00000 page 2M [ 0.000000] 00f1e00000 - 00f1e34000 page 4k [ 0.000000] kernel direct mapping tables up to f1e34000 @ 1fffa000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-000000030bfff000 [ 0.000000] 0100000000 - 030be00000 page 2M [ 0.000000] 030be00000 - 030bfff000 page 4k [ 0.000000] kernel direct mapping tables up to 30bfff000 @ f1e29000-f1e34000 [ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) [ 0.000000] ACPI: XSDT 00000000f1e34a80 000A4 (v01 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: FACP 00000000f1e34b80 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20110623/tbfadt-610) [ 0.000000] ACPI Warning: Invalid length for Pm2ControlBlock: 32, using default 8 (20110623/tbfadt-610) [ 0.000000] ACPI: DSDT 00000000f1e34c80 01A41 (v01 HP DSDT 00000001 INTL 20030228) [ 0.000000] ACPI: FACS 00000000f1e34100 00040 [ 0.000000] ACPI: SPCR 00000000f1e34140 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) [ 0.000000] ACPI: MCFG 00000000f1e341c0 0003C (v01 HP ProLiant 00000001 00000000) [ 0.000000] ACPI: HPET 00000000f1e34200 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: FFFF 00000000f1e34240 00064 (v02 HP ProLiant 00000002 Ò? 0000162E) [ 0.000000] ACPI: SPMI 00000000f1e342c0 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: ERST 00000000f1e34300 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: APIC 00000000f1e34500 00252 (v01 HP ProLiant 00000002 00000000) [ 0.000000] ACPI: FFFF 00000000f1e34780 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: BERT 00000000f1e34900 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: HEST 00000000f1e34940 000BC (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: DMAR 00000000f1e34a00 00070 (v01 HP ProLiant 00000001 Ò? 0000162E) [ 0.000000] ACPI: SSDT 00000000f1e36700 00125 (v03 HP CRSPCI0 00000002 HP 00000001) [ 0.000000] ACPI: SSDT 00000000f1e36840 00573 (v03 HP riser0 00000002 INTL 20030228) [ 0.000000] ACPI: SSDT 00000000f1e36dc0 0014B (v01 HP pcc 00000001 INTL 20090625) [ 0.000000] ACPI: SSDT 00000000f1e36f40 0058C (v01 INTEL PPM RCM 80000001 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea000abfffff] PMD -> [ffff8802ff400000-ffff880309ffffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0030bfff [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x00000096 [ 0.000000] 0: 0x00000100 -> 0x000f1e34 [ 0.000000] 0: 0x00100000 -> 0x0030bfff [ 0.000000] On node 0 totalpages: 3136953 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 972396 pages, LIFO batch:31 [ 0.000000] Normal zone: 29344 pages used for memmap [ 0.000000] Normal zone: 2116959 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x908 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] 64 Processors exceeds NR_CPUS limit of 8 [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 0000000000096000 - 0000000000097000 [ 0.000000] PM: Registered nosave memory: 0000000000097000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000f1e34000 - 00000000f1e3e000 [ 0.000000] PM: Registered nosave memory: 00000000f1e3e000 - 00000000f3fff000 [ 0.000000] PM: Registered nosave memory: 00000000f3fff000 - 00000000f4000000 [ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000 [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at f8000000 (gap: f8000000:6c00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88030bc00000 s75776 r8192 d22528 u262144 [ 0.000000] pcpu-alloc: s75776 r8192 d22528 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3093268 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=1 netif_num=4 syno_hw_version=DS3612xs sn=12345678 [ 0.000000] Internal HD num: 1 [ 0.000000] Internal netif num: 4 [ 0.000000] Synology Hardware Version: DS3612xs-j [ 0.000000] Serial Number: 12345678 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 12256136k/12779516k available (3547k kernel code, 231704k absent, 291676k reserved, 2915k data, 15716k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2793.169 MHz processor. [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.33 BogoMIPS (lpj=2793169) [ 0.000008] pid_max: default: 32768 minimum: 301 [ 0.000067] Mount-cache hash table entries: 256 [ 0.000197] CPU: Physical Processor ID: 0 [ 0.000199] CPU: Processor Core ID: 0 [ 0.000206] mce: CPU supports 7 MCE banks [ 0.000222] CPU0: Thermal monitoring enabled (TM1) [ 0.000229] using mwait in idle threads. [ 0.003093] ACPI: Core revision 20110623 [ 0.005599] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.015587] CPU0: Intel(R) Pentium(R) CPU G840 @ 2.80GHz stepping 07 [ 0.116563] Performance Events: PEBS fmt1+, SandyBridge events, Broken BIOS detected, complain to your hardware vendor. [ 0.116570] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330) [ 0.116573] Intel PMU driver. [ 0.116574] PEBS disabled due to CPU errata. [ 0.116577] ... version: 3 [ 0.116579] ... bit width: 48 [ 0.116581] ... generic registers: 8 [ 0.116583] ... value mask: 0000ffffffffffff [ 0.116584] ... max period: 000000007fffffff [ 0.116586] ... fixed-purpose events: 3 [ 0.116588] ... event mask: 00000007000000ff [ 0.116756] Booting Node 0, Processors #1 [ 0.116760] smpboot cpu 1: start_ip = 91000 [ 0.207512] Brought up 2 CPUs [ 0.207516] Total of 2 processors activated (11172.95 BogoMIPS). [ 0.216818] xor: automatically using best checksumming function: generic_sse [ 0.221394] generic_sse: 7128.000 MB/sec [ 0.221396] xor: using function: generic_sse (7128.000 MB/sec) [ 0.221450] NET: Registered protocol family 16 [ 0.221831] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.221834] ACPI: bus type pci registered [ 0.221964] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000) [ 0.221968] PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820 [ 0.225805] PCI: Using configuration type 1 for base access [ 0.229644] bio: create slab at 0 [ 0.246376] raid6: int64x1 1695 MB/s [ 0.263346] raid6: int64x2 2011 MB/s [ 0.280326] raid6: int64x4 1816 MB/s [ 0.297297] raid6: int64x8 1511 MB/s [ 0.314244] raid6: sse2x1 4289 MB/s [ 0.331222] raid6: sse2x2 5312 MB/s [ 0.348196] raid6: sse2x4 6027 MB/s [ 0.348198] raid6: using algorithm sse2x4 (6027 MB/s) [ 0.348255] ACPI: Added _OSI(Module Device) [ 0.348258] ACPI: Added _OSI(Processor Device) [ 0.348260] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.348262] ACPI: Added _OSI(Processor Aggregator Device) [ 0.348885] ACPI: EC: Look up EC in DSDT [ 0.350362] \_SB_:_OSC evaluation returned wrong type [ 0.350365] _OSC request data:1 17 [ 0.350901] ACPI: Interpreter enabled [ 0.350906] ACPI: (supports S0 S4 S5) [ 0.350922] ACPI: Using IOAPIC for interrupt routing [ 0.356570] ACPI: No dock devices found. [ 0.356574] HEST: Table parsing has been initialized. [ 0.356578] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.356602] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-13]) [ 0.356678] pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfbffffff] [ 0.356681] pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff] [ 0.356684] pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] [ 0.356686] pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] [ 0.356689] pci_root PNP0A08:00: host bridge window [io 0x0d00-0x0fff] [ 0.356692] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed03fff] [ 0.356694] pci_root PNP0A08:00: host bridge window [mem 0xfed00000-0xfed44fff] [ 0.356697] pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03bb] [ 0.356699] pci_root PNP0A08:00: host bridge window [io 0x03c0-0x03df] [ 0.356702] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.356706] pci_root PNP0A08:00: host bridge window expanded to [mem 0xfed00000-0xfed44fff]; [mem 0xfed00000-0xfed44fff] ignored [ 0.356722] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600 [ 0.356771] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604 [ 0.356814] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.356817] pci 0000:00:01.0: PME# disabled [ 0.356846] pci 0000:00:06.0: [8086:010d] type 1 class 0x000604 [ 0.356887] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.356890] pci 0000:00:06.0: PME# disabled [ 0.356936] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.356961] pci 0000:00:1a.0: reg 10: [mem 0xfacc0000-0xfacc03ff] [ 0.357063] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.357068] pci 0000:00:1a.0: PME# disabled [ 0.357092] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.357182] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.357186] pci 0000:00:1c.0: PME# disabled [ 0.357214] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604 [ 0.357305] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.357309] pci 0000:00:1c.4: PME# disabled [ 0.357334] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604 [ 0.357417] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.357421] pci 0000:00:1c.5: PME# disabled [ 0.357446] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604 [ 0.357529] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.357533] pci 0000:00:1c.6: PME# disabled [ 0.357557] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604 [ 0.357639] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.357644] pci 0000:00:1c.7: PME# disabled [ 0.357672] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.357696] pci 0000:00:1d.0: reg 10: [mem 0xfacb0000-0xfacb03ff] [ 0.357798] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.357803] pci 0000:00:1d.0: PME# disabled [ 0.357825] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.357897] pci 0000:00:1f.0: [8086:1c54] type 0 class 0x000601 [ 0.358031] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101 [ 0.358049] pci 0000:00:1f.2: reg 10: [io 0x1400-0x1407] [ 0.358058] pci 0000:00:1f.2: reg 14: [io 0x1408-0x140b] [ 0.358067] pci 0000:00:1f.2: reg 18: [io 0x1410-0x1417] [ 0.358076] pci 0000:00:1f.2: reg 1c: [io 0x1418-0x141b] [ 0.358085] pci 0000:00:1f.2: reg 20: [io 0x1420-0x142f] [ 0.358095] pci 0000:00:1f.2: reg 24: [io 0x1430-0x143f] [ 0.358154] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101 [ 0.358171] pci 0000:00:1f.5: reg 10: [io 0x1440-0x1447] [ 0.358181] pci 0000:00:1f.5: reg 14: [io 0x1448-0x144b] [ 0.358190] pci 0000:00:1f.5: reg 18: [io 0x1450-0x1457] [ 0.358199] pci 0000:00:1f.5: reg 1c: [io 0x1458-0x145b] [ 0.358208] pci 0000:00:1f.5: reg 20: [io 0x1460-0x146f] [ 0.358217] pci 0000:00:1f.5: reg 24: [io 0x1470-0x147f] [ 0.358294] pci 0000:00:01.0: PCI bridge to [bus 04-04] [ 0.358327] pci 0000:00:06.0: PCI bridge to [bus 07-07] [ 0.358382] pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] [ 0.358470] pci 0000:02:00.0: [8086:10d3] type 0 class 0x000200 [ 0.358497] pci 0000:02:00.0: reg 10: [mem 0xfbde0000-0xfbdfffff] [ 0.358534] pci 0000:02:00.0: reg 18: [io 0x4000-0x401f] [ 0.358554] pci 0000:02:00.0: reg 1c: [mem 0xfbdd0000-0xfbdd3fff] [ 0.358712] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.358719] pci 0000:02:00.0: PME# disabled [ 0.360274] pci 0000:00:1c.4: PCI bridge to [bus 02-02] [ 0.360279] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.360283] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.360367] pci 0000:03:00.0: [8086:10d3] type 0 class 0x000200 [ 0.360395] pci 0000:03:00.0: reg 10: [mem 0xfbee0000-0xfbefffff] [ 0.360432] pci 0000:03:00.0: reg 18: [io 0x5000-0x501f] [ 0.360452] pci 0000:03:00.0: reg 1c: [mem 0xfbed0000-0xfbed3fff] [ 0.360609] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.360616] pci 0000:03:00.0: PME# disabled [ 0.362275] pci 0000:00:1c.5: PCI bridge to [bus 03-03] [ 0.362280] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] [ 0.362284] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.362372] pci 0000:0d:00.0: [1912:0014] type 0 class 0x000c03 [ 0.362409] pci 0000:0d:00.0: reg 10: [mem 0xfbff0000-0xfbff1fff 64bit] [ 0.362592] pci 0000:0d:00.0: PME# supported from D0 D3hot D3cold [ 0.362599] pci 0000:0d:00.0: PME# disabled [ 0.364280] pci 0000:00:1c.6: PCI bridge to [bus 0d-0d] [ 0.364287] pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.364363] pci 0000:01:00.0: [103c:3306] type 0 class 0x000880 [ 0.364384] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff] [ 0.364400] pci 0000:01:00.0: reg 14: [mem 0xfbcf0000-0xfbcf01ff] [ 0.364416] pci 0000:01:00.0: reg 18: [io 0x3400-0x34ff] [ 0.364582] pci 0000:01:00.1: [102b:0533] type 0 class 0x000300 [ 0.364604] pci 0000:01:00.1: reg 10: [mem 0xf9000000-0xf9ffffff pref] [ 0.364621] pci 0000:01:00.1: reg 14: [mem 0xfbce0000-0xfbce3fff] [ 0.364636] pci 0000:01:00.1: reg 18: [mem 0xfb000000-0xfb7fffff] [ 0.364801] pci 0000:01:00.2: [103c:3307] type 0 class 0x000880 [ 0.364823] pci 0000:01:00.2: reg 10: [io 0x3800-0x38ff] [ 0.364838] pci 0000:01:00.2: reg 14: [mem 0xfaff0000-0xfaff00ff] [ 0.364855] pci 0000:01:00.2: reg 18: [mem 0xfae00000-0xfaefffff] [ 0.364870] pci 0000:01:00.2: reg 1c: [mem 0xfad80000-0xfadfffff] [ 0.364886] pci 0000:01:00.2: reg 20: [mem 0xfad70000-0xfad77fff] [ 0.364901] pci 0000:01:00.2: reg 24: [mem 0xfad60000-0xfad67fff] [ 0.364918] pci 0000:01:00.2: reg 30: [mem 0x00000000-0x0000ffff pref] [ 0.364989] pci 0000:01:00.2: PME# supported from D0 D3hot D3cold [ 0.364995] pci 0000:01:00.2: PME# disabled [ 0.365035] pci 0000:01:00.4: [103c:3300] type 0 class 0x000c03 [ 0.365110] pci 0000:01:00.4: reg 20: [io 0x2000-0x201f] [ 0.367267] pci 0000:00:1c.7: PCI bridge to [bus 01-01] [ 0.367272] pci 0000:00:1c.7: bridge window [io 0x2000-0x3fff] [ 0.367277] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbcfffff] [ 0.367284] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.367352] pci 0000:00:1e.0: PCI bridge to [bus 13-13] (subtractive decode) [ 0.367363] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfbffffff] (subtractive decode) [ 0.367366] pci 0000:00:1e.0: bridge window [io 0x1000-0xffff] (subtractive decode) [ 0.367369] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode) [ 0.367372] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode) [ 0.367375] pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff] (subtractive decode) [ 0.367378] pci 0000:00:1e.0: bridge window [mem 0xfed00000-0xfed44fff] (subtractive decode) [ 0.367381] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb] (subtractive decode) [ 0.367383] pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df] (subtractive decode) [ 0.367386] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.367421] pci_bus 0000:00: on NUMA node 0 [ 0.367425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.367568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT1._PRT] [ 0.367768] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT5._PRT] [ 0.367823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT6._PRT] [ 0.367876] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT7._PRT] [ 0.368063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPT8._PRT] [ 0.368123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT] [ 0.368309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT] [ 0.368494] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.368498] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.368500] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.371806] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 *11) [ 0.371853] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) [ 0.371898] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *7 10 11) [ 0.371942] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 *11) [ 0.371985] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *7 10 11) [ 0.372028] ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) [ 0.372071] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 11) *0, disabled. [ 0.372115] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *0, disabled. [ 0.372317] vgaarb: device added: PCI:0000:01:00.1,decodes=io+mem,owns=io+mem,locks=none [ 0.372321] vgaarb: loaded [ 0.372323] vgaarb: bridge control possible 0000:01:00.1 [ 0.372495] SCSI subsystem initialized [ 0.372607] libata version 3.00 loaded. [ 0.372813] PCI: Using ACPI for IRQ routing [ 0.374503] PCI: pci_cache_line_size set to 64 bytes [ 0.374598] reserve RAM buffer: 0000000000096400 - 000000000009ffff [ 0.374601] reserve RAM buffer: 00000000f1e34000 - 00000000f3ffffff [ 0.374603] reserve RAM buffer: 000000030bfff000 - 000000030bffffff [ 0.374805] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.374813] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.376857] Switching to clocksource hpet [ 0.376940] pnp: PnP ACPI init [ 0.376948] ACPI: bus type pnp registered [ 0.376972] pnp 00:00: [bus 00-13] [ 0.376975] pnp 00:00: [mem 0xf8000000-0xfbffffff window] [ 0.376978] pnp 00:00: [io 0x1000-0xffff window] [ 0.376980] pnp 00:00: [io 0x0000-0x03af window] [ 0.376983] pnp 00:00: [io 0x03e0-0x0cf7 window] [ 0.376985] pnp 00:00: [io 0x0d00-0x0fff window] [ 0.376988] pnp 00:00: [mem 0xfed00000-0xfed03fff window] [ 0.376991] pnp 00:00: [mem 0xfed00000-0xfed44fff window] [ 0.376993] pnp 00:00: [io 0x03b0-0x03bb window] [ 0.376995] pnp 00:00: [io 0x03c0-0x03df window] [ 0.376998] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.377066] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.377295] pnp 00:01: [io 0x0070-0x0077] [ 0.377298] pnp 00:01: [io 0x0408-0x040f] [ 0.377300] pnp 00:01: [io 0x04d0-0x04d1] [ 0.377302] pnp 00:01: [io 0x0020-0x003f] [ 0.377304] pnp 00:01: [io 0x00a0-0x00bf] [ 0.377306] pnp 00:01: [io 0x0090-0x009f] [ 0.377308] pnp 00:01: [io 0x0050-0x0053] [ 0.377311] pnp 00:01: [io 0x0310-0x0313] [ 0.377313] pnp 00:01: [io 0x0316-0x0317] [ 0.377315] pnp 00:01: [io 0x0700-0x071f] [ 0.377317] pnp 00:01: [io 0x0880-0x08ff] [ 0.377319] pnp 00:01: [io 0x0900-0x097f] [ 0.377321] pnp 00:01: [io 0x0010-0x001f] [ 0.377323] pnp 00:01: [io 0x0cd4-0x0cd7] [ 0.377325] pnp 00:01: [io 0x0cd0-0x0cd3] [ 0.377327] pnp 00:01: [io 0x0f50-0x0f58] [ 0.377329] pnp 00:01: [io 0x00f0] [ 0.377331] pnp 00:01: [io 0x0ca0-0x0ca1] [ 0.377333] pnp 00:01: [io 0x0ca4-0x0ca5] [ 0.377335] pnp 00:01: [mem 0xf4000000-0xf7ffffff] [ 0.377338] pnp 00:01: [mem 0xfe000000-0xfebfffff] [ 0.377340] pnp 00:01: [mem 0xfed90000-0xfed91fff] [ 0.377343] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.377345] pnp 00:01: [io 0x02f8-0x02ff] [ 0.377454] system 00:01: [io 0x0408-0x040f] has been reserved [ 0.377457] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.377461] system 00:01: [io 0x0310-0x0313] has been reserved [ 0.377464] system 00:01: [io 0x0316-0x0317] has been reserved [ 0.377466] system 00:01: [io 0x0700-0x071f] has been reserved [ 0.377469] system 00:01: [io 0x0880-0x08ff] has been reserved [ 0.377472] system 00:01: [io 0x0900-0x097f] has been reserved [ 0.377475] system 00:01: [io 0x0cd4-0x0cd7] has been reserved [ 0.377478] system 00:01: [io 0x0cd0-0x0cd3] has been reserved [ 0.377481] system 00:01: [io 0x0f50-0x0f58] has been reserved [ 0.377483] system 00:01: [io 0x0ca0-0x0ca1] has been reserved [ 0.377486] system 00:01: [io 0x0ca4-0x0ca5] has been reserved [ 0.377489] system 00:01: [io 0x02f8-0x02ff] has been reserved [ 0.377493] system 00:01: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.377496] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.377499] system 00:01: [mem 0xfed90000-0xfed91fff] has been reserved [ 0.377502] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.377514] pnp 00:02: [io 0x0ca2-0x0ca3] [ 0.377575] pnp 00:02: Plug and Play ACPI device, IDs IPI0001 (active) [ 0.377603] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.377662] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.377674] pnp 00:04: [dma 7] [ 0.377676] pnp 00:04: [io 0x0000-0x000f] [ 0.377678] pnp 00:04: [io 0x0080-0x008f] [ 0.377680] pnp 00:04: [io 0x00c0-0x00df] [ 0.377740] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.377751] pnp 00:05: [io 0x0061] [ 0.377808] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.377819] pnp 00:06: [io 0x002e-0x002f] [ 0.377876] pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.378006] pnp 00:07: [irq 4] [ 0.378009] pnp 00:07: [io 0x03f8-0x03ff] [ 0.378155] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.378167] pnp 00:08: [io 0x0070-0x0071] [ 0.378226] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.378238] pnp 00:09: [io 0x0060] [ 0.378240] pnp 00:09: [io 0x0064] [ 0.378246] pnp 00:09: [irq 1] [ 0.378305] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.378320] pnp 00:0a: [irq 12] [ 0.378382] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active) [ 0.378530] pnp: PnP ACPI: found 11 devices [ 0.378532] ACPI: ACPI bus type pnp unregistered [ 0.386002] PCI: max bus depth: 1 pci_try_num: 2 [ 0.386059] pci 0000:00:01.0: PCI bridge to [bus 04-04] [ 0.386066] pci 0000:00:06.0: PCI bridge to [bus 07-07] [ 0.386073] pci 0000:00:1c.0: PCI bridge to [bus 0a-0a] [ 0.386086] pci 0000:00:1c.4: PCI bridge to [bus 02-02] [ 0.386090] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff] [ 0.386096] pci 0000:00:1c.4: bridge window [mem 0xfbd00000-0xfbdfffff] [ 0.386105] pci 0000:00:1c.5: PCI bridge to [bus 03-03] [ 0.386108] pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff] [ 0.386114] pci 0000:00:1c.5: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.386123] pci 0000:00:1c.6: PCI bridge to [bus 0d-0d] [ 0.386129] pci 0000:00:1c.6: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.386141] pci 0000:01:00.2: BAR 6: assigned [mem 0xfad00000-0xfad0ffff pref] [ 0.386144] pci 0000:00:1c.7: PCI bridge to [bus 01-01] [ 0.386148] pci 0000:00:1c.7: bridge window [io 0x2000-0x3fff] [ 0.386153] pci 0000:00:1c.7: bridge window [mem 0xfad00000-0xfbcfffff] [ 0.386158] pci 0000:00:1c.7: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.386166] pci 0000:00:1e.0: PCI bridge to [bus 13-13] [ 0.386191] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.386196] pci 0000:00:01.0: setting latency timer to 64 [ 0.386201] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.386204] pci 0000:00:06.0: setting latency timer to 64 [ 0.386211] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.386215] pci 0000:00:1c.0: setting latency timer to 64 [ 0.386222] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.386226] pci 0000:00:1c.4: setting latency timer to 64 [ 0.386237] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.386242] pci 0000:00:1c.5: setting latency timer to 64 [ 0.386252] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.386256] pci 0000:00:1c.6: setting latency timer to 64 [ 0.386267] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.386272] pci 0000:00:1c.7: setting latency timer to 64 [ 0.386279] pci 0000:00:1e.0: setting latency timer to 64 [ 0.386283] pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfbffffff] [ 0.386286] pci_bus 0000:00: resource 5 [io 0x1000-0xffff] [ 0.386288] pci_bus 0000:00: resource 6 [io 0x0000-0x03af] [ 0.386290] pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7] [ 0.386293] pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff] [ 0.386295] pci_bus 0000:00: resource 9 [mem 0xfed00000-0xfed44fff] [ 0.386298] pci_bus 0000:00: resource 10 [io 0x03b0-0x03bb] [ 0.386300] pci_bus 0000:00: resource 11 [io 0x03c0-0x03df] [ 0.386302] pci_bus 0000:00: resource 12 [mem 0x000a0000-0x000bffff] [ 0.386305] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff] [ 0.386308] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 0.386310] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff] [ 0.386313] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.386315] pci_bus 0000:0d: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.386318] pci_bus 0000:01: resource 0 [io 0x2000-0x3fff] [ 0.386320] pci_bus 0000:01: resource 1 [mem 0xfad00000-0xfbcfffff] [ 0.386323] pci_bus 0000:01: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref] [ 0.386326] pci_bus 0000:13: resource 4 [mem 0xf8000000-0xfbffffff] [ 0.386328] pci_bus 0000:13: resource 5 [io 0x1000-0xffff] [ 0.386330] pci_bus 0000:13: resource 6 [io 0x0000-0x03af] [ 0.386333] pci_bus 0000:13: resource 7 [io 0x03e0-0x0cf7] [ 0.386335] pci_bus 0000:13: resource 8 [io 0x0d00-0x0fff] [ 0.386337] pci_bus 0000:13: resource 9 [mem 0xfed00000-0xfed44fff] [ 0.386340] pci_bus 0000:13: resource 10 [io 0x03b0-0x03bb] [ 0.386342] pci_bus 0000:13: resource 11 [io 0x03c0-0x03df] [ 0.386345] pci_bus 0000:13: resource 12 [mem 0x000a0000-0x000bffff] [ 0.386404] NET: Registered protocol family 2 [ 0.386544] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.387227] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.388060] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.388227] TCP: Hash tables configured (established 262144 bind 65536) [ 0.388230] TCP reno registered [ 0.388235] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.388298] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.388448] NET: Registered protocol family 1 [ 0.388557] RPC: Registered named UNIX socket transport module. [ 0.388560] RPC: Registered udp transport module. [ 0.388562] RPC: Registered tcp transport module. [ 0.388564] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.388598] pci 0000:00:1a.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 0.398885] pci 0000:00:1a.0: PCI INT A disabled [ 0.398915] pci 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.409864] pci 0000:00:1d.0: PCI INT A disabled [ 0.409896] pci 0000:0d:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.409932] pci 0000:0d:00.0: PCI INT A disabled [ 0.409945] pci 0000:01:00.1: Boot video device [ 0.409959] pci 0000:01:00.4: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.409984] pci 0000:01:00.4: PCI INT B disabled [ 0.409988] PCI: CLS 64 bytes, default 64 [ 0.862095] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.862100] Placing 64MB software IO TLB between ffff8800ede29000 - ffff8800f1e29000 [ 0.862103] software IO TLB at phys 0xede29000 - 0xf1e29000 [ 0.897824] VFS: Disk quotas dquot_6.5.2 [ 0.897864] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.898035] Registering the id_resolver key type [ 0.899210] msgmni has been set to 23937 [ 0.899246] async_tx: api initialized (async) [ 0.899346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.899350] io scheduler noop registered [ 0.899352] io scheduler deadline registered [ 0.899366] io scheduler cfq registered (default) [ 0.899918] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.899954] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.900498] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.900529] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 0.903653] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.909275] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.909280] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.912308] vesafb: mode is 640x480x16, linelength=1280, pages=11 [ 0.912311] vesafb: scrolling: redraw [ 0.912314] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.912411] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90004100000, using 1200k, total 8192k [ 0.929872] Console: switching to colour frame buffer device 80x30 [ 0.944389] fb0: VESA VGA frame buffer device [ 0.944483] intel_idle: MWAIT substates: 0x1120 [ 0.944486] intel_idle: v0.4 model 0x2A [ 0.944488] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.946108] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.946114] ACPI: Power Button [PWRF] [ 0.953191] ERST: Failed to get Error Log Address Range. [ 0.958224] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 1.608008] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.629959] serial8250: ttyS0 at I/O 0x2f8 (irq = 3) is a 16550A [ 1.655625] serial8250: ttyS1 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.736947] brd: module loaded [ 1.742024] Loading iSCSI transport class v2.0-870. [ 1.768173] rdac: device handler registered [ 1.782842] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 [ 1.787139] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.787147] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.790100] rtc_cmos 00:08: RTC can wake from S4 [ 1.792936] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 1.792969] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.793572] i2c /dev entries driver [ 1.801499] md: linear personality registered for level -1 [ 1.801503] md: raid0 personality registered for level 0 [ 1.801506] md: raid1 personality registered for level 1 [ 1.801508] md: raid10 personality registered for level 10 [ 1.801511] md: raid6 personality registered for level 6 [ 1.801513] md: raid5 personality registered for level 5 [ 1.801515] md: raid4 personality registered for level 4 [ 1.803342] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 1.815009] cpuidle: using governor ladder [ 1.835210] cpuidle: using governor menu [ 1.835487] TCP cubic registered [ 1.835490] NET: Registered protocol family 17 [ 1.835508] Registering the dns_resolver key type [ 1.840117] rtc_cmos 00:08: setting system clock to 2014-04-10 23:33:02 UTC (1397172782) [ 1.847285] Freeing unused kernel memory: 15716k freed [ 1.849937] Write protecting the kernel read-only data: 6144k [ 1.852182] Freeing unused kernel memory: 532k freed [ 1.853338] Freeing unused kernel memory: 256k freed [ 1.861710] Refined TSC clocksource calibration: 2793.653 MHz. [ 1.861716] Switching to clocksource tsc [ 1.899626] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.064897] Loading modules backported from Linux version v3.12.8-0-g97f15f1 [ 2.064901] Backport generated by backports.git v3.12.8-1-0-geb41fad [ 2.108894] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007) [ 2.126083] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 2.133702] dca service started, version 1.12.1 [ 2.141354] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.141358] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.150161] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.150165] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.159165] e1000e_new: Intel(R) PRO/1000 Network Driver - 3.0.4-NAPI [ 2.159169] e1000e_new: Copyright(c) 1999 - 2014 Intel Corporation. [ 2.159191] e1000e 0000:02:00.0: Disabling ASPM L0s L1 [ 2.159208] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.159231] e1000e 0000:02:00.0: setting latency timer to 64 [ 2.159376] e1000e 0000:02:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.159479] e1000e 0000:02:00.0: irq 42 for MSI/MSI-X [ 2.159485] e1000e 0000:02:00.0: irq 43 for MSI/MSI-X [ 2.159491] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 2.262892] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) e8:39:35:ee:41:42 [ 2.262896] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 2.262988] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 2.262998] e1000e 0000:03:00.0: Disabling ASPM L0s L1 [ 2.263011] e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.263032] e1000e 0000:03:00.0: setting latency timer to 64 [ 2.263148] e1000e 0000:03:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 2.263248] e1000e 0000:03:00.0: irq 45 for MSI/MSI-X [ 2.263254] e1000e 0000:03:00.0: irq 46 for MSI/MSI-X [ 2.263260] e1000e 0000:03:00.0: irq 47 for MSI/MSI-X [ 2.374000] e1000e 0000:03:00.0: eth1: (PCI Express:2.5GT/s:Width x1) e8:39:35:ee:41:43 [ 2.374005] e1000e 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection [ 2.374096] e1000e 0000:03:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF [ 2.383958] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 2.393501] Intel(R) Gigabit Ethernet Network Driver - version 5.0.6 [ 2.393504] Copyright (c) 2007-2013 Intel Corporation. [ 2.401462] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 2.401465] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 2.409551] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.6.7-k [ 2.409555] ixgbe: Copyright (c) 1999-2011 Intel Corporation. [ 2.487208] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 2.494673] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 2.519606] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 2.549415] sky2: driver version 1.30 [ 2.573163] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 2.573166] Copyright (c) 2007 Atheros Corporation. [ 2.597026] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 2.611625] sis900.c: v1.08.10 Apr. 2 2006 [ 2.628485] Brocade 10G Ethernet driver - version: 3.0.2.2 [ 2.639434] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25) [ 2.649828] NET: Registered protocol family 10 [ 2.657402] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011) [ 2.687207] cxgb4vf: could not create debugfs entry, continuing [ 2.709650] QLogic/NetXen Network Driver v4.0.77 [ 2.725819] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25 [ 2.741447] enic: Cisco VIC Ethernet NIC Driver, ver 2.1.1.28 [ 2.762280] iscsi: registered transport (tcp) [ 2.989540] stex: Promise SuperTrak EX Driver version: 4.6.0000.4 [ 3.045012] ata_piix 0000:00:1f.2: version 2.13 [ 3.045028] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.045034] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 3.045076] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 3.053928] scsi0 : ata_piix [ 3.056639] scsi1 : ata_piix [ 3.058839] ata1: SATA max UDMA/133 cmd 0x1400 ctl 0x1408 bmdma 0x1420 irq 17 [ 3.058846] ata2: SATA max UDMA/133 cmd 0x1410 ctl 0x1418 bmdma 0x1428 irq 17 [ 3.817879] ata1.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.817896] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.824279] ata1.00: ATA-8: HGST HUS724020ALE640, MJ6OA580, max UDMA/133 [ 3.824283] ata1.00: 3907029168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 3.824466] ata1.01: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133 [ 3.824471] ata1.01: 7814037168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 3.830246] ata1.00: configured for UDMA/133 [ 3.833180] ata1.01: configured for UDMA/133 [ 3.834742] scsi 0:0:0:0: Direct-Access HGST HUS724020ALE640 MJ6O PQ: 0 ANSI: 5 [ 3.835057] syno_disk_type_get: disk driver 'ata_piix' [ 3.835061] syno_disk_type_get: SATA syno_port_type 1 [ 3.835070] sd_probe: Got SATA dev_prefix (sd), index (0), disk_name (), disk_len (20) [ 3.835490] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.835494] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.835540] sd 0:0:0:0: [sda] Write Protect is off [ 3.835544] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.835563] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.869256] sda: sda1 sda2 sda3 [ 3.870032] scsi 0:0:1:0: Direct-Access WDC WD40EFRX-68WT0N0 80.0 PQ: 0 ANSI: 5 [ 3.872613] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.873504] syno_disk_type_get: disk driver 'ata_piix' [ 3.873508] syno_disk_type_get: SATA syno_port_type 1 [ 3.873513] want_idx 0 index 1. delay and reget [ 4.871235] want_idx 0 index 1 [ 4.871239] want_idx 0 index 1. delay and reget [ 5.869747] want_idx 0 index 1 [ 5.869750] want_idx 0 index 1. delay and reget [ 6.868261] want_idx 0 index 1 [ 6.868265] want_idx 0 index 1. delay and reget [ 7.866773] want_idx 0 index 1 [ 7.866776] want_idx 0 index 1. delay and reget [ 8.865294] want_idx 0 index 1 [ 8.865299] sd_probe: Got SATA dev_prefix (sd), index (1), disk_name (), disk_len (20) [ 8.865648] sd 0:0:1:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) [ 8.865653] sd 0:0:1:0: [sdb] 4096-byte physical blocks [ 8.865699] sd 0:0:1:0: [sdb] Write Protect is off [ 8.865702] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.865723] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8.927492] sdb: sdb1 sdb2 sdb3 [ 8.928962] sd 0:0:1:0: [sdb] Attached SCSI disk [ 9.626232] ata2.00: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 9.626246] ata2.01: SATA link down (SStatus 0 SControl 300) [ 9.629613] ata2.00: ATA-8: HGST HUS724020ALE640, MJ6OA580, max UDMA/133 [ 9.629618] ata2.00: 3907029168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 9.635610] ata2.00: configured for UDMA/133 [ 9.637164] scsi 1:0:0:0: Direct-Access HGST HUS724020ALE640 MJ6O PQ: 0 ANSI: 5 [ 9.637518] syno_disk_type_get: disk driver 'ata_piix' [ 9.637522] syno_disk_type_get: SATA syno_port_type 1 [ 9.637528] want_idx 1 index 2. delay and reget [ 10.635656] want_idx 1 index 2 [ 10.635660] want_idx 1 index 2. delay and reget [ 11.634194] want_idx 1 index 2 [ 11.634197] want_idx 1 index 2. delay and reget [ 12.632713] want_idx 1 index 2 [ 12.632717] want_idx 1 index 2. delay and reget [ 13.631206] want_idx 1 index 2 [ 13.631210] want_idx 1 index 2. delay and reget [ 14.629727] want_idx 1 index 2 [ 14.629733] sd_probe: Got SATA dev_prefix (sd), index (2), disk_name (), disk_len (20) [ 14.630056] sd 1:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 14.630060] sd 1:0:0:0: [sdc] 4096-byte physical blocks [ 14.630106] sd 1:0:0:0: [sdc] Write Protect is off [ 14.630110] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 14.630130] sd 1:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 14.631010] ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 14.631017] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 14.631053] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 14.639603] scsi2 : ata_piix [ 14.643215] scsi3 : ata_piix [ 14.644981] ata3: SATA max UDMA/133 cmd 0x1440 ctl 0x1448 bmdma 0x1460 irq 17 [ 14.644986] ata4: SATA max UDMA/133 cmd 0x1450 ctl 0x1458 bmdma 0x1468 irq 17 [ 14.656985] sdc: sdc1 sdc2 sdc3 [ 14.658406] sd 1:0:0:0: [sdc] Attached SCSI disk [ 14.960097] ata3: SATA link down (SStatus 0 SControl 300) [ 15.275624] ata4: SATA link down (SStatus 0 SControl 300) [ 15.283326] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 15.283821] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 15.284467] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 15.311212] Fusion MPT base driver 3.04.20 [ 15.311215] Copyright (c) 1999-2008 LSI Corporation [ 15.324803] Fusion MPT SPI Host driver 3.04.20 [ 15.333199] Fusion MPT SAS Host driver 3.04.20 [ 15.341844] mpt2sas version 13.100.00.00 loaded [ 15.350585] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 15.359275] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 15.367311] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [ 15.375415] Adaptec aacraid driver 1.1-7[28000]-ms [ 15.383968] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 15.444053] mv61xx: module license 'Proprietary' taints kernel. [ 15.444057] Disabling lock debugging due to kernel taint [ 15.452634] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 15.461110] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 15.468846] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 15.477129] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) [ 15.485734] rr62x:RocketRAID 62x SATA controller driver v1.2 (Apr 5 2014 06:51:23) [ 16.195606] rr62x:no controller detected. [ 16.217819] mpt2sas version 13.100.00.00 unloading [ 16.229143] mpt2sas version 13.100.00.00 loaded
  10. maikst

    file system error

    Habe die gleichen Probleme... 4.3 und 5.0 melden File system errors 4.3 hatte regelmäßig Fehler und dann habe ich 5.0 in er Offnung installiert, es wird klappen. Hardware ist ein ML110 G7 mit 3 neuen Festplatten. 2 x 2 TB HGST als Raid 1 und 1 x 4TB WD Red Die Hardware und vor allem die Platten sind einwandfrei. Bin total genervt, weil ich seit 1 Monat damit rummache und es trotz neu aufsetzen etc immer wieder solche Fehler gibt. Die üblichen segfault von DSMnotify etc hab ich auch und ich nehme einfach an, dass irgendein Speicehrüberlauf stattfindet und dann irgendwann es zu File system Fehlern kommt.... Timebackup setze ich nicht ein. Der Server ist ein reiner Fileserver. Kein Ahnung, wie das bei anderen angeblich ohne diese Fehler ablaufen soll... Ich trau dem Teil nicht mehr.
  11. Have the same errors and some more... [ 280.274890] dsmnotify.cgi[26036]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdb11e0 error 6 [ 280.297397] storagehandler.[26037]: segfault at 0 ip 000000000809e298 sp 00000000ffbbda70 error 6 [ 284.823836] PkgSynoMan.cgi[26150]: segfault at 0 ip 0000000008060618 sp 00000000fffe4980 error 6 [ 297.560411] PkgSynoMan.cgi[26149]: segfault at 0 ip 0000000008060618 sp 00000000ff881890 error 6 [ 582.224437] dsmnotify.cgi[26383]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe44a70 error 6 [ 582.312238] storagehandler.[26384]: segfault at 0 ip 000000000809e298 sp 00000000ffb48ae0 error 6 [ 614.773084] dsmnotify.cgi[26790]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdadc30 error 6 [ 635.977465] dsmnotify.cgi[26815]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe1f540 error 6 [ 668.742409] dsmnotify.cgi[26881]: segfault at 0 ip 000000000804ccb8 sp 00000000ffac9900 error 6 [ 701.178009] dsmnotify.cgi[26939]: segfault at 0 ip 000000000804ccb8 sp 00000000ffff8b70 error 6 [ 732.217957] dsmnotify.cgi[26986]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb2ccf0 error 6 [ 767.582225] dsmnotify.cgi[27034]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdbea10 error 6 [ 798.791618] dsmnotify.cgi[27066]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8eb860 error 6 [ 832.968984] dsmnotify.cgi[27117]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9194f0 error 6 [ 863.411862] dsmnotify.cgi[27177]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9069d0 error 6 [ 893.934464] dsmnotify.cgi[27239]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb16d40 error 6 [ 924.507086] dsmnotify.cgi[27299]: segfault at 0 ip 000000000804ccb8 sp 00000000ffad6730 error 6 [ 954.964483] dsmnotify.cgi[27362]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd9a3c0 error 6 [ 985.595943] dsmnotify.cgi[27424]: segfault at 0 ip 000000000804ccb8 sp 00000000ff83f680 error 6 [ 1019.942172] dsmnotify.cgi[27487]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8d6380 error 6 [ 1053.338540] dsmnotify.cgi[27862]: segfault at 0 ip 000000000804ccb8 sp 00000000ff90f020 error 6 [ 1083.736459] dsmnotify.cgi[27923]: segfault at 0 ip 000000000804ccb8 sp 00000000ff888ec0 error 6 [ 1114.139390] dsmnotify.cgi[27975]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcaea10 error 6 [ 1144.529342] dsmnotify.cgi[28026]: segfault at 0 ip 000000000804ccb8 sp 00000000ff93b590 error 6 Anyone an idea?
  12. Moin, Da ich keinen Thread zu kompatibler USB 3.0 Hardware gefunden habe... ist hier jetzt einer Ich habe ein USB 3.0 Karte gesucht, die mit XPEnoloy (gnoboot) zusammenarbeiten kann. Die Karte "4 Port USB 3.0 PCI-e PCI Express Card Adapter NEC Chipsatz 5Gbps" funktioniert. Auf der Karte steht die Bezeichnung ULS-U3P4N-4PA-3A Hersteller unbekannt. Features: Chipset ID: NEC uPD720201 . Unterstützt PCI Express 2.0 X1 Lane, kann die Übertragung von bis zu 5 Gbps MAX. Unterstützt USB 3.0 Spezifikation typeA Anschluss X 4ports. Abwärtskompatibel mit USB 2.0 1.1/USB. Unterstützt die folgenden SpeedDatenübertragung: Low-Speed (1,5 Mbps ) / Full-speed (12Mbps) / High-speed (480Mbps ) / Super-Speed ( 5 Gbps ). Unterstützt Externe Netzstecker, um die Stromversorgung für jeden USB3.0. Bis zu 900mA MAX / Port. Ich habe sie bei Ebay für 11,44 Euro inkl. Versand gefunden. Maik
  13. would like to click on your ads... but our proxy is filtering them.. I will do it from my 3G connection .... but please consider a paypal donate button...
  14. Again: why so complicated ??? Yes, I think the same thing too... It's alpha! Don't expect a fully working boot image in every release. Notice it too, but I don't have time to investigate. Thanks for reporting! Yes, you are right... it is alpha software... but the download is really challenging Anyway, this evening I found the time to test Alpha 8... I used a HP ML110 G7, 12GB with a SD Card (SD Card reader directly on the mainboard) for booting and 2 SATA HDD for data. GREAT Job ! Well Done.... it was working out of the box until now without any issues... surprising. Thank you for you work! After complete check of the disks... still running... I will copy a few TB to see how it is working, tomorrow... I have the possibilty to compare directly with a DS1513+ Until now.... no difference...just faster. Maik
  15. hi, I also try to make a bootable stick... It cost much time to understand jdownload and than it sucks with google doc files... I managed to download and decrypt it but now I'm stuck... I have Alpha 8 and there is no img file inside... great ok ok... download of Alpha 7 is also neccessary...... and I assume that I have to replace the files with Alpha 8 ?? Why so complicated? Please just make simple downloadble files without jdownload etc and it will take much less time to get started... Or is this a test? Thx Maik
  16. hi, I also try to make a bootable stick... It cost much time to understand jdownload and than it sucks with google doc files... I managed to download and decrypt it but now I'm stuck... I have Alpha 8 and there is no img file inside... great ok ok... download of Alpha 7 is also neccessary...... and I assume that I have to replace the files with Alpha 8 ?? Why so complicated? Please just make simple downloadble files without jdownload etc and it will take much less time to get started... Or is this a test? Thx Maik
×
×
  • Create New...