romicva

Members
  • Content Count

    21
  • Joined

  • Last visited

Everything posted by romicva

  1. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 Update2 - Loader version and model: Jun's Loader v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Dell Vostro 260 - Additional comments: Reboot required
  2. Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.5-15254 Update 1 - Loader version and model: JUN'S LOADER v1.02b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - Dell Vostro - Additional comments: REBOOT REQUIRED
  3. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.4-15217 Update 5 - Loader version and model: Jun's Loader v1.02b - DS3615xs - Installation type: Baremetal (Dell Vostro) - Additional comments: Requires reboot
  4. Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.4 15217 Update 2 - Loader version and model: Jun's Loader v1.02b - DS3615xs - Installation type: Baremetal (Dell Vostro, Intel Core Core I3-4130 2 4TB HDD) - Additional comments: Requires reboot
  5. Updated bare-metal to DS3615xs to 4 a week ago and yesterday to 5 with no issues.
  6. Hello all! Thank you Jun! I've updated my Dell Vostro 270T i3 from 6.0.X to 6.1.3-15152 and everything seems to have worked beautifully! Good luck everybody!
  7. 1 Using NIC's MAC was never part of my problem, it was someone else's observation that you asked me (might be by mistake) to test and so I did. 2 Router is properly configured and that NIC was not set for DHCP reservation or anything else of that sort. 3 My problem was inability to install Jun's 1.01 (under AHCI). I can install DSM5 in AHCI though. 4 I am only able to install Jun's 1.01 if I set motherboard to ATA, then install goes smoothly. After successful install I can change SATA to AHCI. 5 BIOS has been reset multiple times and has no effect 6 I am using NIC's MAC (and was able to c
  8. I was not able to install with native MAC and AHCI. I was able to install in ATA and any MAC. I've repeated it a number of times: -Set SATA to ATA -Install DSM 6 -Change SATA to AHCI Everything seems to be working. Allowing DSM to update to 6.02 fails, so I'm stuck for now. Stuck but hoping that development will continue here. Thanks for your help Polanskiman. Best to all.
  9. Not exactly, I changed to AHCI after installation. Below is the sequence of the steps I took: 1 Set SATA to ATA (not AHCI) 2 Install Jun's 1.01 3 Confirm system works 4 Set SATA to AHCI 5 Confirm system works Thank you for the link!!!!!!
  10. I decided to take it one step further. On the system as it is now (DSM 6 installed, configured, and seemingly happy) I went ahead and changed SATA (in UEFI) to AHCI - it still works! Amazing! I guess, I'll dig out another USB drive and an old hard drive to start a brand new install to test out native MAC with AHCI from the get go. Thanks again for your support!
  11. Wow! Thank you for these quick replies - really appreciate it Do you mean use real MAC and switch back to AHCI? Thanks!
  12. Thank you, I'm not sure I'll be able to find it since I don't speak french. My hardware: https://xpenology.com/forum/topic/7507-tutorial-installmigrate-dsm-52-to-602-juns-loader/?do=findComment&comment=64931 The specs are: Dell Vostro 270 Minitower CPU I3-3220 Baremetal Install Integrated NIC Realtek 10/100/1000 Mbps Ethernet Realtek RTL8111G Storage SATA 2.0 (Intel chipset B75, not sure what the actual controller is though, sorry) Issue: Can't install DSM6
  13. Great idea (about using a custom ddns, is there one someone could recommend?)! Thank you! On a different note - I've been trying to install DSM6 for some time now. It had always failed. I've read through two 200+ pages threads and, of course - this one. While reading through one of the threads I noticed someone mentioning something along these lines "... try IDE instead of AHCI and you'll be surprised..." It sounded silly at best and was ignored for the most part. Anyway, having hit the wall in any and all of my attempts (including two posts on this forum asking for help that went un-answer
  14. Great idea (about using a custom ddns, is there one someone could recommend?)! Thank you! On a different note - I've been trying to install DSM6 for some time now. It had always failed. I've read through two 200+ pages threads and, of course - this one. While reading through one of the threads I noticed someone mentioning something along these lines "... try IDE instead of AHCI and you'll be surprised..." It sounded silly at best and was ignored for the most part. Anyway, having hit the wall in any and all of my attempts (including two posts on this forum asking for help that went un-answer
  15. I see, I will give it a try, even though I need synology integration. So this won't work long term. Thanks a lot for replying.
  16. Hello, What do you mean by correct MAC? I'm using the same MAC that worked for 5.2 install. However 6 fails with infinite recovery. Thanks a lot!
  17. Hello all, I tried installation documented by the OP. The installation process finishes and everything seems to be good. After reboot Web GUI says that I need to migrate (the only choice). I then let it migrate, system reboots and offers recovery, again - the only choice on the Web GUI. When recovery completes and system reboots I'm again offered recovery as the only option. It it a never ending cycle... The specs are: Dell Vostro 270 Minitower CPU I3-3220 Baremetal Install Integrated NIC Realtek 10/100/1000 Mbps Ethernet Realtek RTL8111G Storage SATA 2.0 (Intel chipset B75,
  18. I attempted above install on Dell Vostro 270. Failed with error 13 (SD card IDs are correct since they were used in successful install of DSM5) The specs are: Dell Vostro 270 Minitower CPU I3-3220 Baremetal Install Integrated NIC Realtek 10/100/1000 Mbps Ethernet Realtek RTL8111G Storage SATA 2.0 (Intel chipset B75, not sure what the actual controller is though, sorry) Issue: DSM6 fails to install. Please help, any help would be appreciated. Thanks!