Symbiot78
Member-
Posts
30 -
Joined
-
Last visited
Everything posted by Symbiot78
-
sooo. .. I think I got it working... Annoyingly I do not know quite how.. What I did was... try multiple versions of nanoboot.. Then I tried the synoboot.img from this site.. still didn't work.. Then I deleted all vdi files, vmdk's etc. that I tested.. I then booted with nanoboot *4528 and installed version 4528 from xpenology.nl This combo.. which I've tried before.. seems to work. Harddisk in Vbox is 50 Gb Sata.
-
Darn it.. I can't get any disks to register in 'storage manager'.. again.. tried scsi, sata, ide.. the ata_piix module fails to load... but I am unsure if that has anything to do with it..
-
ok, so a reboot fixed that.. now I just need to figure out why I cannot see any of the disks I added...
-
ok so It installed and it works... only annoyance is that it's using 99% CPU... process is 'scemd' ... ideas?
-
strange... either it's because it wanted more space.. or because there should be more than 1 drive attached.. . I left the 4Gb drive attached when I created the 200Gb drive..
-
I may have found my problem.. I allocated 4Gb for the syno host disk.. and this seems to have been the problem. I just tried allocating 200Gb (dynamically assigned) to a second disk and now it is formatting/installing... I don't really want to use 200gb nor do I want the disk to be dynamically resized but... will update on progress..
-
yes, I've tried that.. with ide disk, sata disk & scsi disk.. no dice..!
-
Hi guys.. thanks for the suggestions... so removing all ide/sata/scsi disks (only cd with nanoboot attached) gives me an error on the webif... no harddrives found.. so there is a difference.. attaching a sata controller & satadisk.. (not ssd) webif recognizes 1 disk, but during initialization it fails. attaching a disk onto the ide controller where the nanoboot iso is mounted.. error 21.. scsi gives me an error 38..
-
ok, so nevermind the screenshot.. I just couldn't see the full screen.. so the bootscreen is actually showing "diskstation login".. when I go to synology assistant and rightclick and select "install" it throws an "error 22" when it tries to format the system partition.. Ideas?
-
Deleted the extra posts I managed to make.. got some bbcode errors but apparently it created the topic anyway..
-
oh.. it just sits there with .....fancontrol.sh
-
Hi I setup a VB and want to run xpenology dsm. I am using bootimage: Nanoboot-5.0.3.2 DSM 5.0-4528 X64 and using dsm file: DSM 5.0-4528 (Main) both downloaded from : http://www.xpenology.nl/xpenology-software/ When I boot with nanoboot and select install/upgrade the image boots but it seems to be stuck.. image: I can access the webif via syno assistant but when I try to use the .pat file I get an error... What am I doing wrong?
-
those spikes are increases in speed up to around 20Mb/s which lasts all of 3-5 seconds..then a long idle period of a few Kb/s..
-
Hi Nox CPU I can't even remember.. but it sits around 1% utilized. .. right now I am transferring data (1.2Tb) between the xpenology and my Synology 412+. this is via asus ac66u and gigabit.. screenshot shows utilization and speed (speed is when it drops)
-
ok, thanks.. I'll backup my data, and THEN do it..
-
Hi I've got a 4 disk Raid5 running on xpenology. All disks are plugged into my motherboard (mb has 4x sata) I am thinking that I'd gain some speed moving the 4 disks to my dawicontrol raid-controller.. which is already sitting in my server.. but just not in use.. 1. would I gain anything? 2. how will the raid5 filesystem react to being moved from what I assume is software raid to hardware raid? 3. is it important that disk1 is plugged into port 1 of the raidcontroller (etc) Hope you guys can give some advice
-
it seems to be the read speed of the harddrives. it ranges from 30kb/s to 15mb/s sometimes higher.. If I start a copy of many/larger files it will start in the mb/s then drop to kb/s then eventually.. after around 10-30mins.. the xpenology box will die and I can no longer get in contact with it without turning off the main power for the server and back on again.
-
Hi I've just installed the dsm5 beta xpenology. When copying/moving files between the xpenology install and my standard synology 412+ I get really erratic performance. speed goes up and down. mostly down. I am running raid5 on both boxes and both have 4x3Tb disks. Same if I mount the xpenology as network drive on my windows PC. Browsing to the drive and opening a video file for instance.. is almost impossible ... it hangs and hangs and hangs.. I've tried the xpenology before and had no issues.. I had the same result on the newest 4.3 from xpenology. Any ideas?
-
Just found this for your controller: http://ubuntu.5.x6.nabble.com/3-8-y-z-e ... 50287.html http://www.spinics.net/lists/linux-ide/msg46859.html I will patch the kernel with their informations in order to handle Marvell 9230 chip. Hi Trantor.. All I have is this.. I tried adding the driver with: echo 1b4b 9230 > /sys/bus/pci/drivers/ahci/new_id which worked.. I think... but as you commented.. it's not reboot proof..
-
Am I correct when reading the changelog that you didn't add support for the dawicontroller yet?
-
Oh.. I did see those posts.. but they made no sense to me..
-
Oh.. I did see those posts.. but they made no sense to me..
-
Hi Trantor.. Perfect... I don't know if I did anything yesterday... I did fiddle around alot trying in complete noob style to figure out how to add the driver... but.. today when I logged in to xpenology dsm .. the disks were present.. Dunno how.. or if it just kindda came online.. the only thing that I did really was try this: which I did .. i didn't find the exact phrasing: SATA controller: Marvell Technology Group Ltd. Device 9230 (rev 08) but something like 88SE9172 and I tried adding it with the echo 1b4b etc etc.. but after I rebooted.. nothing showed in dsm.. So maybe something is already present that recognizes the controller.. but I think.. if you can find something proper.. then that would be a lot more reliable.. Thanks for your great work!
-
Hi Trantor.. Perfect... I don't know if I did anything yesterday... I did fiddle around alot trying in complete noob style to figure out how to add the driver... but.. today when I logged in to xpenology dsm .. the disks were present.. Dunno how.. or if it just kindda came online.. the only thing that I did really was try this: which I did .. i didn't find the exact phrasing: SATA controller: Marvell Technology Group Ltd. Device 9230 (rev 08) but something like 88SE9172 and I tried adding it with the echo 1b4b etc etc.. but after I rebooted.. nothing showed in dsm.. So maybe something is already present that recognizes the controller.. but I think.. if you can find something proper.. then that would be a lot more reliable.. Thanks for your great work!
-
So in hoping that my controller drivers were implemented in the beta6 hba boot image i tried switching to that and installing dsm4.3 instead.. but alas.. no joy... |