• Content Count

  • Joined

  • Last visited

Everything posted by Barrow1990

  1. utcome of the update: SUCCESSFUL - DSM version prior update: 6.1.7-15284 - Loader version and model: Jun's Mod V1.02b - DS3615xs - Using custom extra.lzma: No - Installation type: Baremetal - Gigabyte GA-H61MA-D2V Rev 2.0, i3-2120, 6GB Ram - Additional comments: Reboot Required
  2. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.4 15217 Update 1 - Loader version and model: Jun's Loader v1.02b - DS3615xs - Installation type: Baremetal (Intel DQ670W) - Additional comments: N/A
  3. Question for you guys. What would be the purpose of have such a powerfull PC for XPEnology? I understand for example in the case of Freenas which is RAM hungry and ECC is very highly recommended if not mendatory, but in the case of XPEnology, why would we need more cores or a faster CPU? Why would we need more RAM? Would ECC be better or not? Most people with that hardware go the virtualisation route. So possibly utilise virtualbox or run dsm in esxi/hyper-v
  4. The file sze posted? I get invalid file format
  5. How do i install this or Create the spk file?
  6. Does anyone know how to compile a spk VMware Tools? Sent from my iPhone using Tapatalk Pro
  7. Hi I seem to have a problem where DSM is unaccessible by GUI and the Dockers that are should be running are not available. This is running the v1.02a Bootloader on ESXi 6.0 I can ssh and telnet into the Nas but not visiable through Synology Assistant I read to run sudo cat /var/log/nginx/error.log which has multiple lines of the following. 2017/04/04 14:31:06 [crit] 9487#9487: *21 connect() to unix:/run/synoscgi.sock failed (2: No such file or directory) while connecting to upstream, client:, server: _, request: "POST /webman/login.cgi HTTP/1.1", upstream: "scgi://u
  8. Hi Ive got this working on ESXi and fully updated (DSM 6.1-15047 Update 2) in which is there a OpenVM tools for this? It was a clean install.
  9. A good majority of the SynoCommunity packages won't work unless you install them on 5.2, and upgrade to 6.0. The reason is that SynoCommunity packages create specific users and groups, a feature that was removed in 6.0 - not entirely removed, but modified in a way that these packages need serious retouching to get them to work again. Further info on the issue here Docker is quite simple to get working. Most of the packages you seem to be using are already available in the packages, ready to deploy. Think of each Docker container as an app running in its own chroot. If y
  10. The SynoCommunity packages do not work on 6.x, it is not an issue with the DS3617xs. What software do you need? Most probably you'll be able to run the same via Docker (which should be the preferred method any way). Syno Community works fine on dsm 6.x with the DS3615xs. The packages i use are sabnzbd, couch potato, sonarr and the respected dependencies. I tried using docker n couldnt get it to work. Also i read somewhere that the docker wont be working for the near future on DX3617xs. But could try it on Sent from my iPhone using Tapatalk Pro
  11. Hi, Booted a vm on ESXi 6.0 and updated to the latest (DSM 6.1-15047 Update 2). Managed to create a disk (Virtual Only). Was only planning on using it for a downloading client with the SynoCommunity Packages but the packaged arent compiled yet for the new DS3617xs But looks good other than the packages issue. Will shut it down for now untill the packages are available. Also ive not put any MAC addresses in the file and still works fine
  12. I have 2 running as well. Seems to work fine. Sent from my iPhone using Tapatalk Pro
  13. 1 of the main reasons for me is to utilise the hardware its on. You dont need loads of power to run a synology. So i can have synology in a vm with pass-through so i can just put it on bare metal and in theory it should just boot fine. But can also run other stuff on the same host Sent from my iPhone using Tapatalk Pro
  14. Update: Decided to have the following set-up: ESXi 6.0 Intel DQ67OW Motherboard 2 x 8GB Corsair Vengeance & 1 x 2GB Kingston (Had Lying about) Dual Port Intel Pro 1000 PCI-E Currently got a SAS3041E-HP and a generic 2 port Sata I have 2x500GB, 2x1TB (SHR on Motherboard sata - Pass-Through) 2x2TB (Raid1 on SAS3041E-HP - Pass-Through) Datastore on generic sata card. My question now is do i put all the hard drives with the same set up in the same vm or separate the 2 disk groups? If i go in same vm i will purchase a better sas card to cope with all he disk drives
  15. Any update on this. The SPAM is getting worst. Sent from my iPhone using Tapatalk
  16. Ive just got round to having another look. Ive managed to put the raid 1 back in the DS212j and did this ... ogy_NAS#t3. Then put it in my ESXi Server and passthrough to vm and it boots up and finds it. Unsure how to replicate that with the bootloader
  17. I had same issue with ESXi 6 and same DSM. Ended up losing the configuration. Thought mine was due to the fact i took 2 hard drives in raid 1 out of a current set up (4 DIsk SHR1 + 2 Disk RAID 1) and putting that in a vm with the other still powered on (Shut down to remove hard drives). Found 1 of them showed in Synology Assistant as normal and the other was like above. Then i tried to connect to the 1 like above and nothing happened. THen all of a sudden lost everything. SO ended up putting the raid 1 in a DS212j (Which is my backup) and then starting from scratch on the SHR1 on bare metal. S
  18. Please could someone recommend me a Sata/SAS Controller. Im looking at putting it in an ESXi as a pass through to Xpenology so what is compatiable? I currently have 4 Sata drives at the moment. But will more than likely add more in the future. Been looking at the following:
  19. I have the same problem but with a different card. Think its driver related on the esxi bootloader. Try boot as baremetal on your vm. If it detects it then its just a driver issue. I got around it by doing it this way. Sent from my iPhone using Tapatalk
  20. Im just testing by transferring part of it to a vm. It completely wiped my set up and had to put my backup into a ds212j and reinstall my production 1. All be performance isnt as good now. Think it lost configuration on both. All the more reason to have a back up Sent from my iPhone using Tapatalk
  21. Look that I have no issue seeing them in esxi, or any other vm baring when i load juns esxi vm loader. Even works fine on the baremetal in a vm Sent from my iPhone using Tapatalk
  22. Ive managed to get the ASM1062 Sata PCI-E Card running on a passthrough. But its using the baremetal login. Is there a way to make it so the ESXi version pulls the driver for it?
  23. Sent from my iPhone using Tapatalk Check your config. My setup is here and its working: Will have a look on the desktop client. Been doing it through web client Sent from my iPhone using Tapatalk
  24. Think there is no driver for that card. Running also vm with passthrough and this works good. But I use a lsi card. But the same card works fine on baremetal Also works in ubuntu vm Sent from my iPhone using Tapatalk Sent from my iPhone using Tapatalk
  25. Think there is no driver for that card. Running also vm with passthrough and this works good. But I use a lsi card. But the same card works fine on baremetal Sent from my iPhone using Tapatalk