derrickang

Members
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral

About derrickang

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I have this LSI controller. The new loader is able to load but after DSM install, it is not responsive to any power commands via DSM web GUI, eg. Shutdown or restart. Anyone else experiencing power issues?
  2. I've rebased the vendor changes on 3.10.77 to 3.10.102, seems still works. jun your are the MAN Next step is I think to troubleshoot the network issue on some system that "prevent" network driver to load at boot. How can I (or the community) help you to debug ? How do you display/access the early boot stage without serial console ? Hi Trantor, I noted you included a list of supported hardware. I checked that my network card, Intel 82576 is on the list but I am experiencing the following on attempting to use the following bootloaders: A. Jun's 6.0.0 : network light blin
  3. I've rebased the vendor changes on 3.10.77 to 3.10.102, seems still works. Dear Jun, I checked that my onboard supermicro NIC or Ethernet chipset, Intel 82576 may not have it's driver included in the 1.01 version of your bootloader. To install DSM, would you suggest that I either: A. Use a stable version of 5.2 that includes my existing Ethernet chipset drivers? OR B. Buy a new Ethernet PCI-E card with a supported chipset and then use version 6 with version 1.01 of your bootloader? **If I go with option B. , do I need to disable the onboard Supermicro NIC during the insta
  4. Thanks Salah, I agree that Supermicro doesn't have the best BIOS out there. However with the server accepting version 5.2 5644, I would have to say it's still pretty acceptable, right? What's your experience like?
  5. Hi guys, I am keen to Install DSM 6 on my baremetal server. my baremetal Install is currently smoothly with version 5.2 5644. I have tried Jun's loader but the DSM's internal IP was never found so later I checked that the onboard supermicro NIC or Ethernet chipset, Intel 82576 may not have it's driver included in Jun's bootloader. Oh man, look like I may have to either: A. Use a stable version of 5.2 that includes my existing Ethernet chipset drivers. OR B. Buy a new Ethernet PCI-E card with a supported chipset and then use version 6 with Jun's bootloader. **If I go with op
  6. Thanks bglf83 and billat 29, I went through all my steps again and realized I was not using the matching Pat file with the lead bootloader. After correcting that, my baremetal Install went smoothly with version 5.2 5644. I noted you tried version 5.2 5592 to be stable. *May I ask where can I download the bootloader and it's matching pat file? *Some of the well known Xpenology sites that provide download repositories are not always online. I also tried Jun's loader but the DSM's internal IP was never found so later I checked that the onboard supermicro NIC or Ethernet chipset, In
  7. Hi bilat 29, Well, regarding what I am doing: I am really trying to get a working install of DSM on my server. Yes, I'm just like most people here, who will of course 'try everything' that possibly comes to mind to solve the issue. Regarding your question of LSI card, there are 2 answers to this: a. I have already tried the install without the LSI card, and ended up with the same 'migration loop of death'. b. LSI card seems to be working well for our forum user: snoopy78 as you can read from: viewtopic.php?f=2&t=6772 Version of bootloader: XPEnoboot 5.2-5644.5 DS3615xs Down
  8. Hi Elpee, Thanks for the reply! I tried what you suggested: formatted 1 drive with Windows, reinserted that 1 drive. Booted that 1 drive with Bootloader USB and the same issue occurred again. What should we do next to avoid this 'migration loop of death'?
  9. Hi Siri_Uk, Great to hear your positive results! Could you share your steps? I know there are lots of superb guides here but many of us are experiencing installation issues and all the help would be most appreciated.
  10. Hi guys, I am a newbie with Expenology so do forgive me if my questions seem naive. Well, I installed Xpenology quite smoothly on my PC as a virtual machine but when I tried installing Xpenology on a bare metal server I am getting a continuous loop of DSM asking me to migrate/reinstall. I have spent hours, actually weeks, reading various forum posts so I know a bare metal install is possible but I can't figure out what I am doing wrong. I have used the USB method, editing the PID, VID, serial number and Mac address in the.cfg file I am trying to install DSM 5.2 5644 Can I