axx3l

Ssh into it and then install lm-sensors. Google for instructions sensors coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +31.0°C (high = +80.0°C, crit = +100.0°C) Core 0: +30.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +30.0°C (high = +80.0°C, crit = +100.0°C) Core 2: +30.0°C (high = +80.0°C, crit = +100.0°C) Core 3: +31.0°C (high = +80.0°C, crit = +100.0°C)

Yup. I have a watt meter..it's cheap...about 15 $

Try: grep "MHz" /proc/cpuinfo You should see how many cores you're using and their frequency. I have an i7 4790 with 4 physical cores and 4 logical ones and it show I'm using all 8 cores.

Case: Fractal Design Node 304 (6x3.5") MB: Asus H87i-plus (6xSATA III) CPU: Intel Core i7 4790 @3.6Ghz (powersaving script) HEATSINK: Noctua NH-U12S RAM: 1x8Gb DDR 3 1600mhz PSU: Corsair Cx430 HDD: 2x6TB WD Purple + 2x4TB WD Purple in RAID 0 Power Consumption : 23w hibernating/ 43w iddle / 65w load HDD temperature: 32 degrees Celsius with all case fans at full/ 36-37 with fans at 50%.(Ambient temp=24) Noise level: HDDs hibernating /fans 50% =29db, fans 100%=39db Noise level: HDDs iddle/ fans 50%=32 dB, fans 100%= 39dB (need to change the 14mm rear exhaust fan) Main usage: download station and PLEX. Things to improve : another stick of 8gb ddr3, a pci-e sata controller, 2 6TB hdd, 2 512gb SSDs for SSD Caching, 2x92 Noctua case fans, 1 x14 Noctua case fan.Hope the PSU can handle all those hdds. I also have a DS414 with 2x4TB WD Green and 2x4TB WD Purple in shr.

Did you check the included modules/drivers in the loader? They are stated in the tutorial. You have 6 sata ports on first controller, 1 on second and 8 on third. So you can try SataPortMap =618. Or perhaps the m.2 slot is also on first controller, then you can enter SataPortMap 78.BTW, as far as I know, the ds3615 can supports only 12 hdd, so you can try 615 or 75. Search the forum, there is a way to use more than 12 drives.

Thanks. I will swap my cpu with the i7 and will post feedback if it works

Hello. My first post here . My setup is a baremetal i3 4330 running on dsm 6.01 update 9 and i'm wondering if i swap this cpu with a core i7 4790, do i need to reinstall xpenology ? Thanks

Hello. My first post here . My setup is a baremetal i3 4330 running on dsm 6.01 update 9 and i'm wondering if i swap this cpu with a core i7 4790, do i need to reinstall xpenology ? Thanks