Jump to content
XPEnology Community

Aigor

Member
  • Posts

    690
  • Joined

  • Last visited

  • Days Won

    6

Everything posted by Aigor

  1. USB is in the microsd reader on Gen8, is baremetal installatation, VID and PID comes from tinycore previous version, for DS3617xs 6.2.3 works flawless
  2. I suppose, i have both entry in gub USB ans sata
  3. DiskStation> fdisk -l |grep -i disk Disk /dev/sda: 233 GB, 250059350016 bytes, 488397168 sectors Disk /dev/md0: 2431 MB, 2549940224 bytes, 4980352 sectors Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md1: 2047 MB, 2147418112 bytes, 4194176 sectors Disk /dev/md1 doesn't contain a valid partition table
  4. Stil can't install DS3617xs from tinycore, even if i'm disconnected from internet, stuck at 56% repeated many times [ 2284.795163] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2284.866132] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2284.905686] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2290.733149] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 2290.795457] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2290.866347] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2290.906283] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2296.739614] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 2296.804086] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2296.875278] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2296.914771] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2302.732568] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 2302.796048] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2302.859247] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2302.899032] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2308.738253] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 2308.804680] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2308.875702] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2308.915130] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2314.731867] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 2314.796642] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2314.867649] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2314.907231] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2320.744865] EXT4-fs (md0): couldn't mount as ext3 due to feature incompatibilities [ 2320.805276] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null) [ 2320.877221] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop [ 2320.916905] <redpill/smart_shim.c:352> ATA_CMD_ID_ATA confirmed SMART support - noop
  5. I have loader from first post in thread, and it works,apart the boot time due to lack of 10Gbit card could be usefull for you?
  6. Nope, i have a complete system to move to new DSM, but before i want to be "almost" sure that i can update from DS3617xs DSM6.2.3
  7. You have a board with IPMI, so you should be able to access them via dedicated port as in specification. Via IPMI you can access to a serial port where you can see debug message and where it stops Try to install without any internet connection. Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog
  8. It depends on your hardware, which board you have?
  9. @Orphéei don't want to bother you, but for better reading, you should use "code" tag to put log, code pieces and so on 🙂
  10. ssh to ilo address, type "vsp" without a double quote, you get serial same to me, no shutdown
  11. I've successfully installed as DS3622xs on bare-metal, Denverton Supermicro server. (offline install is the only way right now) Caveat: This build is going to look for "certified" Synology drives. If you're using something other than what's on the official list, you're likely to receive the dreaded "Unverified" critical drive warning after logging in. I was able to get around the error by using the tutorial here: https://linustechtips.com/topic/1371655-synology-dsm-7-drive-lock-bypass/ TL;DR: ssh into your instance and using sudo, edit the correct file(s) for your build and drive details under /var/lib/disk-compatibility. In my case, I prepended {"model":"ST4000LM024-2AN17V","firmware”:”0001”,”rec_intvl”:[1]}, to the "ds3622xs+_host_v7.db" file, saved, rebooted, and the warning went away. (I didn't have a *.new file listed) I'm also able to see all the SMART details now as well. Well done, I hope everyone will work together to make this loader more perfect while trying the loader From Yanjun howto add your disk into synology DB
  12. Can you be more specific? i had a lot of trouble to get installed system, i'm in your same situation.
  13. Finally i installed DSM7 on DS3622xs+ but i think there is something strange in marvel handlig To not taint post i added logs file from my Gen8 How i did it? i used user_config from wget https://github.com/dogodefi/redpill-loader-action/blob/main/user_config.DS3622xs.json But with VID and PID from tinycore build loader with tg3 modules, but without 10gbit card booted system, wait until the end, get apipa ip because i was diconnected from internet, download pat file, start installation, no automatic reboot, looking on serial i saw a loop, manualy reset, wait, installation goes well. Feel free to ask logGen8DS3622xs+.zip
  14. @cferra Why you dont use ssh to connect to tinycore?
  15. [ 25.569536] Marvell Storage Controller is found, using IRQ 0, driver version 6.0.0.1009N. [ 25.608357] Marvell Linux driver mv14xx, driver version 6.0.0.1009N. [ 25.638425] Start mv_hba_init. [ 25.652453] hba_desc->id=0. [ 25.665619] original device id=1475. [ 25.682438] ATHENA : BAR 0 : (null). [ 25.703727] ATHENA : BAR 1 : (null). [ 25.724922] ATHENA : BAR 2 : (null). [ 25.746073] ATHENA : BAR 3 : (null). [ 25.767263] ATHENA : BAR 4 : (null). [ 25.789242] ATHENA : BAR 5 : (null). [ 25.810424] HBA ext struct init'ed at ffff880430a7dc00. [ 25.835859] show module id[0] cached size[0x93cf50], addr[0xffffc900000f9000]. [ 25.870149] show module id[1] cached size[0x26a4c0], addr[0xffffc90000a37000]. [ 25.904379] HBA device id 0x1475, RunAsNonRAID:0. [ 25.926563] BUG: unable to handle kernel paging request at 000000000001c800 [ 25.959540] IP: [<ffffffffa002dc29>] MV_REG_WRITE_DWORD+0x9/0x10 [mv14xx] [ 25.991516] PGD 430616067 PUD 43041e067 PMD 0 [ 26.012417] Oops: 0002 [#1] SMP [ 26.027763] Modules linked in: mv14xx(O+) redpill(OE) [ 26.051470] CPU: 3 PID: 4288 Comm: insmod Tainted: G OE 4.4.180+ #42218 [ 26.087726] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 26.121200] task: ffff8804311f8cc0 ti: ffff88042c124000 task.ti: ffff88042c124000 [ 26.156511] RIP: 0010:[<ffffffffa002dc29>] [<ffffffffa002dc29>] MV_REG_WRITE_DWORD+0x9/0x10 [mv14xx] [ 26.199570] RSP: 0018:ffff88042c1277e8 EFLAGS: 00010206 [ 26.224483] RAX: 0000000000000000 RBX: 0000000000001520 RCX: 0000000000000001 [ 26.258477] RDX: 0000000000000000 RSI: 000000000001c800 RDI: 000000000001c800 [ 26.292096] RBP: ffff88042c1277e8 R08: 0000000000000002 R09: 0000000000000000 [ 26.325663] R10: 0000000000000001 R11: ffffffff81a0562d R12: ffff88042c12783c [ 26.359301] R13: 0000000000000000 R14: 0000000000000020 R15: 0000000000000001 [ 26.392917] FS: 00007f8b5eb93740(0000) GS:ffff8804456c0000(0000) knlGS:0000000000000000 [ 26.431197] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.458198] CR2: 000000000001c800 CR3: 000000042b315000 CR4: 00000000000606f0 [ 26.491951] Stack: [ 26.501466] ffff88042c127828 ffffffffa0069160 00000000000dccbb ffff88042c1278f8 [ 26.536874] ffff88042c127988 0000000000000000 ffffffffa0078b78 ffff8804311a0480 [ 26.571719] ffff88042c127858 ffffffffa006a105 ffffffff81711cea ffff88042c1278f8 [ 26.606699] Call Trace: [ 26.618187] [<ffffffffa0069160>] SPI_BuildCmd+0x40/0x90 [mv14xx] [ 26.647058] [<ffffffffa006a105>] OdinSPI_AtmelIdentify+0x35/0xa0 [mv14xx] [ 26.679526] [<ffffffffa006a50d>] OdinSPI_Init+0xd/0xc0 [mv14xx] [ 26.707833] [<ffffffffa0031d82>] mv_nvram_init_param+0xd2/0x4f0 [mv14xx] [ 26.739945] [<ffffffff813843c3>] ? serial8250_console_putchar+0x33/0x180 [ 26.772301] [<ffffffffa00412a8>] core_get_chip_info+0xb8/0x230 [mv14xx] [ 26.804092] [<ffffffff8109dc2c>] ? console_unlock+0x1bc/0x530 [ 26.832271] [<ffffffff8109e273>] ? vprintk_emit+0x2d3/0x4e0 [ 26.860029] [<ffffffff8109e49a>] ? vprintk+0x1a/0x20 [ 26.883679] [<ffffffff8109e4a9>] ? vprintk_default+0x9/0x10 [ 26.910525] [<ffffffff81129e49>] ? printk+0x46/0x4e [ 26.933873] [<ffffffffa004152a>] Core_ModuleInitialize+0x9a/0x270 [mv14xx] [ 26.966934] [<ffffffffa002dd25>] ? ossw_printk+0x65/0x70 [mv14xx] [ 26.996158] [<ffffffffa002bcc4>] mv_hba_init+0x6b4/0xb00 [mv14xx] [ 27.025282] [<ffffffffa002dd25>] ? ossw_printk+0x65/0x70 [mv14xx] [ 27.054357] [<ffffffffa00276a9>] mv_probe+0x1c9/0x300 [mv14xx] [ 27.082159] [<ffffffff81315dd4>] pci_device_probe+0x94/0x110 [ 27.109244] [<ffffffff813a07ba>] driver_probe_device+0xba/0x2f0 [ 27.137614] [<ffffffff813a0a69>] __driver_attach+0x79/0x80 [ 27.163994] [<ffffffff813a09f0>] ? driver_probe_device+0x2f0/0x2f0 [ 27.193466] [<ffffffff8139ea5f>] bus_for_each_dev+0x5f/0x90 [ 27.220249] [<ffffffff813a0209>] driver_attach+0x19/0x20 [ 27.245763] [<ffffffff8139fe16>] bus_add_driver+0x196/0x220 [ 27.272456] [<ffffffffa00a7000>] ? 0xffffffffa00a7000 [ 27.296654] [<ffffffff813a127b>] driver_register+0x5b/0xd0 [ 27.322987] [<ffffffff81314837>] __pci_register_driver+0x47/0x50 [ 27.351798] [<ffffffffa00a7093>] sas_hba_init+0x93/0x95 [mv14xx] [ 27.380500] [<ffffffff810003b7>] do_one_initcall+0x87/0x1a0 [ 27.407341] [<ffffffff8112a28b>] do_init_module+0x5a/0x1bf [ 27.433639] [<ffffffff810c7a13>] load_module+0x1c63/0x2250 [ 27.459915] [<ffffffff810c4ae0>] ? __symbol_put+0x40/0x40 [ 27.485789] [<ffffffff810c81cd>] SYSC_finit_module+0x7d/0xa0 [ 27.512843] [<ffffffff810c8209>] SyS_finit_module+0x9/0x10 [ 27.539318] [<ffffffff81564a8a>] entry_SYSCALL_64_fastpath+0x1e/0x8e [ 27.569770] Code: 00 00 55 89 f6 48 01 f7 48 89 e5 88 17 5d c3 0f 1f 00 55 89 f6 48 01 f7 48 89 e5 66 89 17 5d c3 66 90 55 89 f6 48 01 f7 48 89 e5 <89> 17 5d c3 0f 1f 00 55 89 f6 48 01 f 7 48 89 e5 8a 07 5d c3 0f [ 27.659413] RIP [<ffffffffa002dc29>] MV_REG_WRITE_DWORD+0x9/0x10 [mv14xx] [ 27.691758] RSP <ffff88042c1277e8> [ 27.708155] CR2: 000000000001c800 [ 27.723792] ---[ end trace 3bdb4aee7fb8538e ]--- With user_config.json { "extra_cmdline": { "pid": "0x4030", "vid": "0x0424", "sn": "2150SQRJP82ZN", "mac1": "00113297DF68" }, "synoinfo": { "supportsystemperature": "no", "supportsystempwarning": "no", "maxdisks" : "16", "support_bde_internal_10g" : "no" }, "ramdisk_copy": { } }
  16. Bad news ------------[ cut here ]------------ [ 96.839227] WARNING: CPU: 0 PID: 429 at /opt/redpill-lkm/shim/bios/bios_hwcap_shim.c:59 GetHwCapability_shim+0x20a/0x220 [redpill]() [ 96.895850] BUG log triggered [ 96.909060] Modules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 96.985868] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D OE 4.4.180+ #42218 [ 97.025278] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 97.059070] Workqueue: usb_hub_wq hub_event [usbcore] [ 97.083282] 0000000000000000 ffff8800a9123a48 ffffffff812dc58b 0000000000000009 [ 97.119131] ffff8800a9123a90 ffff8800a9123a80 ffffffff81051f9e ffff8800a9123b80 [ 97.153965] 00000000ffffffff 0000000000000000 0000000000000001 ffffffffa0238430 [ 97.188978] Call Trace: [ 97.200827] [<ffffffff812dc58b>] dump_stack+0x4d/0x72 [ 97.225876] [<ffffffff81051f9e>] warn_slowpath_common+0x7e/0xb0 [ 97.254411] [<ffffffff81052017>] warn_slowpath_fmt+0x47/0x50 [ 97.281701] [<ffffffffa000b3fa>] GetHwCapability_shim+0x20a/0x220 [redpill] [ 97.315953] [<ffffffffa000b2c5>] GetHwCapability_shim+0xd5/0x220 [redpill] [ 97.349422] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 97.379350] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 97.404780] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 97.433193] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 97.461943] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 97.487349] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 97.512362] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 97.545563] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 97.577795] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 97.608285] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 97.637444] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 97.664024] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 97.696027] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 97.723539] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 97.749437] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 97.777838] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 97.800802] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 97.829911] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 97.855309] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 97.884034] ---[ end trace 8f867192589ecfd0 ]--- [ 97.905931] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 [ 97.942660] IP: [<ffffffffa0001327>] __enable_symbol_override+0x7/0x120 [redpill] [ 97.978013] PGD 0 [ 97.987463] Oops: 0000 [#2] SMP [ 98.002725] Modules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 98.078196] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D W OE 4.4.180+ #42218 [ 98.116095] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 98.149350] Workqueue: usb_hub_wq hub_event [usbcore] [ 98.173146] task: ffff880432efb300 ti: ffff8800a9120000 task.ti: ffff8800a9120000 [ 98.208507] RIP: 0010:[<ffffffffa0001327>] [<ffffffffa0001327>] __enable_symbol_override+0x7/0x120 [redpill] [ 98.255338] RSP: 0018:ffff8800a9123b18 EFLAGS: 00010202 [ 98.280337] RAX: 00000000fffffffb RBX: ffff8800a9123b80 RCX: 00000000000008b7 [ 98.313860] RDX: 0000000000000001 RSI: 0000000000000246 RDI: 0000000000000000 [ 98.348545] RBP: ffff8800a9123b28 R08: 000000000000000a R09: 00000000000008b7 [ 98.382184] R10: 0000000000000060 R11: ffffffff81a0562d R12: 00000000fffffffb [ 98.415979] R13: 0000000000000000 R14: 0000000000000001 R15: ffffffffa0238430 [ 98.449673] FS: 0000000000000000(0000) GS:ffff880445600000(0000) knlGS:0000000000000000 [ 98.487791] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 98.514783] CR2: 0000000000000038 CR3: 000000000180a000 CR4: 00000000000606f0 [ 98.548433] Stack: [ 98.558014] ffff8800a9123b80 00000000fffffffb ffff8800a9123b70 ffffffffa000b2d9 [ 98.592819] ffff8800a9123ba0 0000000000000000 ffff8800ad230000 0000000000000000 [ 98.627859] ffff8804308ec000 ffff88042b650430 ffff88043382dd20 ffff8800a9123ba0 [ 98.662837] Call Trace: [ 98.674414] [<ffffffffa000b2d9>] GetHwCapability_shim+0xe9/0x220 [redpill] [ 98.707465] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 98.736280] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 98.761357] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 98.789973] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 98.818786] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 98.844391] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 98.869138] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 98.902186] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 98.933854] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 98.964226] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 98.993518] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 99.020119] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 99.052157] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 99.079744] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 99.105533] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 99.134057] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 99.157061] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 99.185948] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 99.211385] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 99.240149] Code: df e8 be fe ff ff 48 c7 c7 f2 ff ff ff e8 c2 fd ff ff e9 78 ff ff ff 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 53 <f6> 47 38 04 48 89 fb 0f 85 c4 00 00 00 4c 8b 03 4c 8d 63 28 48 [ 99.329981] RIP [<ffffffffa0001327>] __enable_symbol_override+0x7/0x120 [redpill] [ 99.365744] RSP <ffff8800a9123b18> [ 99.382239] CR2: 0000000000000038 [ 99.398750] ---[ end trace 8f867192589ecfd1 ]--- [ 99.420810] BUG: unable to handle kernel paging request at ffffffffffffffd8 [ 99.454324] IP: [<ffffffff8106f81b>] kthread_data+0xb/0x20 [ 99.480551] PGD 180d067 PUD 180f067 PMD 0 [ 99.499656] Oops: 0000 [#3] SMP [ 99.515584] Modules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 99.591210] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D W OE 4.4.180+ #42218 [ 99.629521] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 99.662873] task: ffff880432efb300 ti: ffff8800a9120000 task.ti: ffff8800a9120000 [ 99.698552] RIP: 0010:[<ffffffff8106f81b>] [<ffffffff8106f81b>] kthread_data+0xb/0x20 [ 99.735820] RSP: 0018:ffff8800a9123820 EFLAGS: 00010002 [ 99.761005] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 99.794609] RDX: ffff880433808400 RSI: 0000000000000000 RDI: ffff880432efb300 [ 99.828605] RBP: ffff8800a9123820 R08: ffff8804456163a8 R09: 0000001725f115c1 [ 99.862491] R10: 0000000000000000 R11: ffff880432efb360 R12: ffff880432efb300 [ 99.896263] R13: ffff880445616340 R14: ffff880445616340 R15: 0000000000000000 [ 99.930197] FS: 0000000000000000(0000) GS:ffff880445600000(0000) knlGS:0000000000000000 [ 99.968385] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 99.995778] CR2: 0000000000000028 CR3: 000000000180a000 CR4: 00000000000606f0 [ 100.029495] Stack: [ 100.038918] ffff8800a9123838 ffffffff8106b7ac 0000000000016340 ffff8800a9123888 [ 100.074100] ffffffff81560c7b 00000000304e7010 ffff8800a9123880 ffff880432efb300 [ 100.109142] ffff880432efb300 ffff8800a91238d8 ffff8800a9123488 ffff880433968000 [ 100.144261] Call Trace: [ 100.155871] [<ffffffff8106b7ac>] wq_worker_sleeping+0xc/0x90 [ 100.183067] [<ffffffff81560c7b>] __schedule+0x36b/0x7a0 [ 100.207861] [<ffffffff815610d6>] schedule+0x26/0x70 [ 100.231291] [<ffffffff81054ce6>] do_exit+0x686/0xa60 [ 100.255331] [<ffffffff81008174>] oops_end+0x84/0xb0 [ 100.278774] [<ffffffff810426ad>] no_context+0xfd/0x2a0 [ 100.303606] [<ffffffff8109e273>] ? vprintk_emit+0x2d3/0x4e0 [ 100.330612] [<ffffffff8104295b>] __bad_area_nosemaphore+0x10b/0x1f0 [ 100.360490] [<ffffffffa000b3fa>] ? GetHwCapability_shim+0x20a/0x220 [redpill] [ 100.394666] [<ffffffff81042a4e>] bad_area_nosemaphore+0xe/0x10 [ 100.422783] [<ffffffff81042e0e>] __do_page_fault+0x1ee/0x3e0 [ 100.450559] [<ffffffff8104300c>] do_page_fault+0xc/0x10 [ 100.475781] [<ffffffff81566892>] page_fault+0x22/0x30 [ 100.500013] [<ffffffffa0001327>] ? __enable_symbol_override+0x7/0x120 [redpill] [ 100.535095] [<ffffffffa000b2d9>] GetHwCapability_shim+0xe9/0x220 [redpill] [ 100.568158] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 100.596887] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 100.621870] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 100.650218] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 100.678992] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 100.704529] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 100.729688] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 100.762865] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 100.795173] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 100.825453] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 100.854517] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 100.880777] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 100.912802] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 100.940256] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 100.966311] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 100.994606] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 101.017872] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 101.046917] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 101.072502] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 101.101262] Code: 99 4f 00 49 8b 04 24 48 85 c0 75 e6 e9 07 ff ff ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 8b 87 c8 04 00 00 55 48 89 e5 <48> 8b 40 d8 5d c3 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 [ 101.190933] RIP [<ffffffff8106f81b>] kthread_data+0xb/0x20 [ 101.217405] RSP <ffff8800a9123820> [ 101.234082] CR2: ffffffffffffffd8 [ 101.249656] ---[ end trace 8f867192589ecfd2 ]--- [ 101.271675] Fixing recursive fault but reboot is needed! [ 232.759865] NMI backtrace for cpu 0 [ 232.759866] CPU: 0 PID: 429 Comm: kworker/0:1 Tainted: P D W OE 4.4.180+ #42218 [ 232.759866] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759866] task: ffff880432efb300 ti: ffff8800a9120000 task.ti: ffff8800a9120000 [ 232.759867] RIP: 0010:[<ffffffff810929b6>] [<ffffffff810929b6>] queued_spin_lock_slowpath+0xd6/0x160 [ 232.759867] RSP: 0018:ffff8800a9123538 EFLAGS: 00000046 [ 232.759867] RAX: 0000000000000000 RBX: 0000000000016340 RCX: ffff880445616e00 [ 232.759868] RDX: 0000000000040000 RSI: 0000000000000001 RDI: ffff880445616340 [ 232.759868] RBP: ffff8800a9123538 R08: 0000000000000101 R09: 0000000000000927 [ 232.759868] R10: 0000000000000060 R11: ffffffff81a0562d R12: 0000000000000009 [ 232.759869] R13: ffff880445616340 R14: ffff880445616340 R15: 0000000000000000 [ 232.759869] FS: 0000000000000000(0000) GS:ffff880445600000(0000) knlGS:0000000000000000 [ 232.759869] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759870] CR2: 0000000000000028 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759870] Stack: [ 232.759870] ffff8800a9123548 ffffffff815645dd ffff8800a9123598 ffffffff8156099d [ 232.759871] 0000000000000008 ffff8800a91235b8 ffff880432efb300 ffff880432efb300 [ 232.759871] 0000000000000009 0000000000000046 ffff880432efb300 0000000000000009 [ 232.759871] Call Trace: [ 232.759871] [<ffffffff815645dd>] _raw_spin_lock_irq+0x1d/0x20 [ 232.759872] [<ffffffff8156099d>] __schedule+0x8d/0x7a0 [ 232.759872] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759872] [<ffffffff81054e75>] do_exit+0x815/0xa60 [ 232.759872] [<ffffffff81008174>] oops_end+0x84/0xb0 [ 232.759873] [<ffffffff810426ad>] no_context+0xfd/0x2a0 [ 232.759873] [<ffffffff8104295b>] __bad_area_nosemaphore+0x10b/0x1f0 [ 232.759873] [<ffffffff812e65b4>] ? number.isra.14+0x2d4/0x2f0 [ 232.759874] [<ffffffff81042a4e>] bad_area_nosemaphore+0xe/0x10 [ 232.759874] [<ffffffff81042e0e>] __do_page_fault+0x1ee/0x3e0 [ 232.759874] [<ffffffff8104300c>] do_page_fault+0xc/0x10 [ 232.759875] [<ffffffff81566892>] page_fault+0x22/0x30 [ 232.759875] [<ffffffff8106f81b>] ? kthread_data+0xb/0x20 [ 232.759875] [<ffffffff8106b7ac>] wq_worker_sleeping+0xc/0x90 [ 232.759875] [<ffffffff81560c7b>] __schedule+0x36b/0x7a0 [ 232.759876] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759876] [<ffffffff81054ce6>] do_exit+0x686/0xa60 [ 232.759876] [<ffffffff81008174>] oops_end+0x84/0xb0 [ 232.759876] [<ffffffff810426ad>] no_context+0xfd/0x2a0 [ 232.759877] [<ffffffff8109e273>] ? vprintk_emit+0x2d3/0x4e0 [ 232.759877] [<ffffffff8104295b>] __bad_area_nosemaphore+0x10b/0x1f0 [ 232.759877] [<ffffffffa000b3fa>] ? GetHwCapability_shim+0x20a/0x220 [redpill] [ 232.759878] [<ffffffff81042a4e>] bad_area_nosemaphore+0xe/0x10 [ 232.759878] [<ffffffff81042e0e>] __do_page_fault+0x1ee/0x3e0 [ 232.759878] [<ffffffff8104300c>] do_page_fault+0xc/0x10 [ 232.759879] [<ffffffff81566892>] page_fault+0x22/0x30 [ 232.759879] [<ffffffffa0001327>] ? __enable_symbol_override+0x7/0x120 [redpill] [ 232.759879] [<ffffffffa000b2d9>] GetHwCapability_shim+0xe9/0x220 [redpill] [ 232.759880] [<ffffffffa00ce93b>] usb_uevent+0xdb/0x130 [usbcore] [ 232.759880] [<ffffffff8139e0e3>] dev_uevent+0x143/0x2c0 [ 232.759880] [<ffffffff812df711>] kobject_uevent_env+0x1d1/0x4f0 [ 232.759881] [<ffffffff8106ff17>] ? notifier_call_chain+0x47/0x70 [ 232.759881] [<ffffffff812dfa3b>] kobject_uevent+0xb/0x10 [ 232.759881] [<ffffffff8139c5c8>] device_del+0x178/0x270 [ 232.759881] [<ffffffffa00cc887>] ? remove_intf_ep_devs+0x37/0x50 [usbcore] [ 232.759882] [<ffffffffa00cd042>] usb_disable_device+0x82/0x1d0 [usbcore] [ 232.759882] [<ffffffffa00c3cd8>] usb_disconnect+0x98/0x270 [usbcore] [ 232.759882] [<ffffffffa00c5df8>] hub_event+0x878/0x14e0 [usbcore] [ 232.759883] [<ffffffff81072dda>] worker_run_work+0x9a/0xe0 [ 232.759883] [<ffffffffa00c5580>] ? hub_port_debounce+0xd0/0xd0 [usbcore] [ 232.759883] [<ffffffff8106a76b>] process_one_work+0x1db/0x4e0 [ 232.759884] [<ffffffff8106aa9d>] worker_thread+0x2d/0x4a0 [ 232.759884] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 232.759884] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759885] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759885] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759885] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759886] Code: 12 83 e0 03 83 ee 01 48 c1 e0 04 48 63 f6 48 05 00 6e 01 00 48 03 04 f5 20 6f 8d 81 48 89 08 8b 41 08 85 c0 75 12 f3 90 8b 41 08 <85> c0 74 f7 8b 07 66 85 c0 74 09 f3 90 8b 07 66 85 c0 75 f7 39 [ 232.759886] NMI backtrace for cpu 1 [ 232.759887] CPU: 1 PID: 11 Comm: watchdog/1 Tainted: P D W OE 4.4.180+ #42218 [ 232.759887] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759887] task: ffff880433bb2640 ti: ffff880433bd0000 task.ti: ffff880433bd0000 [ 232.759888] RIP: 0010:[<ffffffff810929b6>] [<ffffffff810929b6>] queued_spin_lock_slowpath+0xd6/0x160 [ 232.759888] RSP: 0018:ffff880433bd3cc0 EFLAGS: 00000046 [ 232.759888] RAX: 0000000000000000 RBX: 0000000000000082 RCX: ffff880445656e00 [ 232.759889] RDX: 0000000000080000 RSI: 0000000000000002 RDI: ffff880445616340 [ 232.759889] RBP: ffff880433bd3cc0 R08: 0000000000000101 R09: 0000000000000001 [ 232.759889] R10: 0000000000000000 R11: 0000000000000810 R12: 0000000000000408 [ 232.759890] R13: 0000000000000400 R14: 0000000000000000 R15: ffff880445616340 [ 232.759890] FS: 0000000000000000(0000) GS:ffff880445640000(0000) knlGS:0000000000000000 [ 232.759890] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759891] CR2: 00007f897fac0b53 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759891] Stack: [ 232.759891] ffff880433bd3cd8 ffffffff815646c4 ffff8804338b8478 ffff880433bd3dd0 [ 232.759892] ffffffff81086c29 ffff880433bd3e04 000000018108124e 0000000000000000 [ 232.759892] ffff88044564f230 ffff88043388f608 ffff88043388f600 0000000000000002 [ 232.759892] Call Trace: [ 232.759892] [<ffffffff815646c4>] _raw_spin_lock_irqsave+0x24/0x30 [ 232.759893] [<ffffffff81086c29>] load_balance+0x299/0x930 [ 232.759893] [<ffffffff8107ebe2>] ? sched_clock_cpu+0xa2/0xc0 [ 232.759893] [<ffffffff8108749e>] pick_next_task_fair+0x1de/0x460 [ 232.759894] [<ffffffff81560d96>] __schedule+0x486/0x7a0 [ 232.759894] [<ffffffff81071fc0>] ? sort_range+0x20/0x20 [ 232.759894] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759895] [<ffffffff81072122>] smpboot_thread_fn+0x162/0x170 [ 232.759895] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759895] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759895] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759896] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759896] Code: 12 83 e0 03 83 ee 01 48 c1 e0 04 48 63 f6 48 05 00 6e 01 00 48 03 04 f5 20 6f 8d 81 48 89 08 8b 41 08 85 c0 75 12 f3 90 8b 41 08 <85> c0 74 f7 8b 07 66 85 c0 74 09 f3 90 8b 07 66 85 c0 75 f7 39 [ 232.759897] NMI backtrace for cpu 2 [ 232.759897] CPU: 2 PID: 3945 Comm: kworker/u48:5 Tainted: P D W OE 4.4.180+ #42218 [ 232.759897] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759898] task: ffff880432c98cc0 ti: ffff88042ec08000 task.ti: ffff88042ec08000 [ 232.759898] RIP: 0010:[<ffffffff810929c3>] [<ffffffff810929c3>] queued_spin_lock_slowpath+0xe3/0x160 [ 232.759898] RSP: 0018:ffff88042ec0bcb0 EFLAGS: 00000002 [ 232.759899] RAX: 0000000000040101 RBX: 0000000000000086 RCX: ffff880445696e00 [ 232.759899] RDX: 00000000000c0000 RSI: 0000000000000000 RDI: ffff880445616340 [ 232.759899] RBP: ffff88042ec0bcb0 R08: 0000000000000101 R09: 0000000000000001 [ 232.759900] R10: 0000000000000000 R11: 0000000000000810 R12: 0000000000000408 [ 232.759900] R13: 0000000000000400 R14: 0000000000000000 R15: ffff880445616340 [ 232.759901] FS: 0000000000000000(0000) GS:ffff880445680000(0000) knlGS:0000000000000000 [ 232.759901] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759901] CR2: 00000000000000b8 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759901] Stack: [ 232.759902] ffff88042ec0bcc8 ffffffff815646c4 ffff8804338b8478 ffff88042ec0bdc0 [ 232.759902] ffffffff81086c29 ffff88042ec0bdf4 00000002000000c8 0000000000000000 [ 232.759902] ffff88044568f230 ffff88043388f808 ffff88043388f800 0000000000000002 [ 232.759903] Call Trace: [ 232.759903] [<ffffffff815646c4>] _raw_spin_lock_irqsave+0x24/0x30 [ 232.759903] [<ffffffff81086c29>] load_balance+0x299/0x930 [ 232.759904] [<ffffffff8107ebe2>] ? sched_clock_cpu+0xa2/0xc0 [ 232.759904] [<ffffffff8108749e>] pick_next_task_fair+0x1de/0x460 [ 232.759904] [<ffffffff815609f4>] __schedule+0xe4/0x7a0 [ 232.759904] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759905] [<ffffffff8106ab19>] worker_thread+0xa9/0x4a0 [ 232.759905] [<ffffffff8106aa70>] ? process_one_work+0x4e0/0x4e0 [ 232.759905] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759906] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759906] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759906] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759907] Code: f6 48 05 00 6e 01 00 48 03 04 f5 20 6f 8d 81 48 89 08 8b 41 08 85 c0 75 12 f3 90 8b 41 08 85 c0 74 f7 8b 07 66 85 c0 74 09 f3 90 <8b> 07 66 85 c0 75 f7 39 c2 75 1f 89 d0 be 01 00 00 00 f0 0f b1 [ 232.759908] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3dModules linked in: tg3(OE) libphy(OE) usb_storage xhci_pci xhci_hcd ehci_pci ehci_hcd usbcore usb_common mv14xx(O+) redpill(OE) [last unloaded: broadwellnk_synobios] [ 232.759908] CPU: 3 PID: 7 Comm: rcu_sched Tainted: P D W OE 4.4.180+ #42218 [ 232.759908] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 04/04/2019 [ 232.759909] task: ffff88043396cc80 ti: ffff8804339b4000 task.ti: ffff8804339b4000 [ 232.759909] RIP: 0010:[<ffffffff81092a2e>] [<ffffffff81092a2e>] queued_spin_lock_slowpath+0x14e/0x160 [ 232.759909] RSP: 0018:ffff8804339b7c00 EFLAGS: 00000002 [ 232.759910] RAX: 0000000000040101 RBX: 0000000000000086 RCX: 0000000000000001 [ 232.759910] RDX: 0000000000000101 RSI: 0000000000000001 RDI: ffff880445616340 [ 232.759910] RBP: ffff8804339b7c00 R08: 0000000000000101 R09: 0000000000000001 [ 232.759911] R10: 0000000000000000 R11: 0000000000000810 R12: 0000000000000408 [ 232.759911] R13: 0000000000000400 R14: 0000000000000000 R15: ffff880445616340 [ 232.759911] FS: 0000000000000000(0000) GS:ffff8804456c0000(0000) knlGS:0000000000000000 [ 232.759912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 232.759912] CR2: 00007f77158529b8 CR3: 000000000180a000 CR4: 00000000000606f0 [ 232.759912] Stack: [ 232.759913] ffff8804339b7c18 ffffffff815646c4 ffff8804338b8478 ffff8804339b7d10 [ 232.759913] ffffffff81086c29 ffff8804339b7d44 0000000300000000 0000000000000000 [ 232.759913] ffff8804456cf230 ffff88043388fa08 ffff88043388fa00 0000000000000002 [ 232.759914] Call Trace: [ 232.759914] [<ffffffff815646c4>] _raw_spin_lock_irqsave+0x24/0x30 [ 232.759914] [<ffffffff81086c29>] load_balance+0x299/0x930 [ 232.759914] [<ffffffff8107ebe2>] ? sched_clock_cpu+0xa2/0xc0 [ 232.759915] [<ffffffff8108749e>] pick_next_task_fair+0x1de/0x460 [ 232.759915] [<ffffffff815609f4>] __schedule+0xe4/0x7a0 [ 232.759915] [<ffffffff815610d6>] schedule+0x26/0x70 [ 232.759916] [<ffffffff81563b6c>] schedule_timeout+0x12c/0x270 [ 232.759916] [<ffffffff810adc30>] ? trace_event_raw_event_tick_stop+0xe0/0xe0 [ 232.759916] [<ffffffff810a97f6>] rcu_gp_kthread+0x3a6/0x8a0 [ 232.759917] [<ffffffff8108cc40>] ? wake_bit_function+0x60/0x60 [ 232.759917] [<ffffffff810a9450>] ? note_gp_changes+0x80/0x80 [ 232.759917] [<ffffffff8106f363>] kthread+0xd3/0xf0 [ 232.759917] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759918] [<ffffffff81564e2f>] ret_from_fork+0x3f/0x80 [ 232.759918] [<ffffffff8106f290>] ? kthread_worker_fn+0x160/0x160 [ 232.759919] Code: 40 08 01 00 00 00 65 ff 0d fc 43 f8 7e 5d c3 f3 90 8b 37 81 fe 00 01 00 00 74 f4 e9 cd fe ff ff 83 fa 01 75 04 eb e6 f3 90 8b 07 <84> c0 75 f8 b8 01 00 00 00 66 89 07 5d c3 0f 1f 40 00 55 48 c7 [ 232.759919] Sending NMI to other CPUs: [ 232.759922] Kernel panic - not syncing: Hard LOCKUP [ 233.787269] Shutting down cpus with NMI [ 233.787269] Kernel Offset: disabled [ 238.982414] ---[ end Kernel panic - not syncing: Hard LOCKUP
  17. Maybe mpt3sas module is not presente into system, you have to add mpt3sas extension to loader
  18. I don't understood
  19. File error comes from wrong VID and PID usually
  20. Ti consiglio di non esporre direttamente l'interfaccia di synology su internet, più tosto metti su openvpn, configuralo, apri solo la porta per openvpn e usa questa per connetterti
  21. Recap I'v made loader with tg3 extension from pocopico github, made micro-sdcard with correct VID and PID for internal card reader of Gen8, no 10Gbit card installed 1) First try, no success, with internet enable first part of installation goes weel, but after rebooting system become migrable in loop 2) Clean disk, redo installation without internet and without 10Gbit card, goes weel, i was able to install DSM7 new on bare metal. If you leave second interface in dhcp mode, it took time to finish boot when you configure system put both interface with fixed ip address. EDIT: i had a spare Qlogic FC card and is recognized by the system, you need to download correct firmware for your card, copy into /lib/firmware and that's it [ 206.847501] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. [ 206.898743] iSCSI:qla_dbg.c:2660:ql_log_pci qla2xxx [0000:07:00.0]-001d: : Found an ISP2432 irq 16 iobase 0xffffc90005938000. [ 207.272792] scsi host7: qla2xxx [ 207.288447] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-00fb:7: QLogic QLE2460 - SG-(X)PCIE1FC-QF4, Sun StorageTek 4 Gb FC Enterprise PCI-Express Single Channel. [ 207.360483] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-00fc:7: ISP2432: PCIe (2.5GT/s x4) @ 0000:07:00.0 hdma+ host#=7 fw=7.03.00 (9496). [ 209.323393] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-00af:7: Performing ISP error recovery - ha=ffff8800ac330000. [ 214.787772] iSCSI:qla_dbg.c:2605:ql_log qla2xxx [0000:07:00.0]-8038:7: Cable is unplugged... As i said, without 10Gbit card, i took time to finish boot but it works. @pocopico what about to add DS3622xs+ into tnycore? Hope it helps
  22. have you tried to perform installation without internet connection?
×
×
  • Create New...