Jump to content
XPEnology Community

Aigor

Member
 View Profile  See their activity

  • Posts

    690

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Everything posted by Aigor

  1. Aigor
    Hi, i have a fully working DSM 7.01 DS3622xs+ installation on HP Gen8 microserver, i added a Qlogic 8 Gbit FC card to use nas as storage for my home lab cluster. I would like to have two luns where to boot from, but it seems that is a little bit tricky to do with FC implementation on synology. I can assign only one single lun to both host or to one host, it seems that i can't, or I don't know how, to assign one lun to one host and other lun to other host and be able to use as boot lun. To be clear, if you enable bios on FC hba you can boot machine using a FC lun that reside on synology, but it seems that you cant do it with two luns connected one to one host. Someone has some advise? Thanks
  2. Aigor
    i can try, let me some time to prepare and compile
  3. Aigor
    Hi, to compile package you need to have a ubuntu machine where to install spksrc https://github.com/SynoCommunity/spksrc that is the framework to compile spk package. You can read doc on github to know howto setup initial environment and how to compile. The problem is that from DSM7 DSM forbid to install package that need root privilege to run, a possible workaround could be use docker with only vmtools installed. If you need other info, ask me
  4. Aigor
    They should work oob
  5. Aigor
    Package there is a "Beta Package" but it works fine
  6. Aigor
    I have same hardware and i was able to update from 6.2.3 to 7.01 how loader has been built? if you used tinycore, you have to add TG3 extension on building and you have to use DS3622xs+ hardware Try install without ANY other network card than internals Gen8 doesn't have UEFI bios so can't boot UEFI loader
  7. Aigor
    Generally speaking, i saw less cpu and ram usage compared with DS3617xs 6.2 loader and system You can overcome disk warning writing your disk model and serial number into synology db
  8. Aigor
    First of all, BACKUP data just to be sure DS3167 will not receive update after thi release, so, choose DS3622xs+ to build new bootloader. You have to use redpill ti buil new bootloader on hardware where runs actual xpenology, do all the procedure as you know, boot with new bootloader, open webpage of new system, use synology assistant if you don't know ip address of the system, choose migration to migrate to new DSM. You have two options 1) keep data and configuration 2) keep only data Personally i choice keep data and config wait until process end, enjoy new DSM Hope it helps
  9. Aigor
    We can't see
  10. Aigor
    It seems that i'v obtained a almost functional openvmtools package, snapshot works, suspend works, shutdown stil doesn't work, if you do shutdown, it powers off VM I need help with some debug If someone is interested https://mega.nz/file/PHxWBAKC#dL5P0J7nzYCNCiZMhyFZY3JZY5qSj89R4isfUGmrFvM Is for DS3622xs+ 7.01 Hope it helps
  11. Aigor
    Today i'm updated my Gen8 from DS3617xs-6.2.3 to DS3622xs+DSM 7.0.1-42218, but still not get update 1 2 or 3, are there some steps that i need to perform to get, for example, upate 3 without issue? Thanks
  12. Aigor
    Thanks for your work! I would like to try on VMware Workstation, it works with e1000e into vmx config file of VM, but i can't see any sata disk where install DSM 7.1 beta
  13. Aigor
    Temo che tu stia usando una versione DSM alquanto obsoleta, ti conviene per lo meno passare alla 6.2.3
  14. Aigor
    Do you had some iscsi lun and target?
  15. Aigor
    Devi seguire il thread https://xpenology.com/forum/topic/53817-redpill-tinycore-loader/ e usare tinycore per fare il loader, non è difficile, basta seguire le istruzioni.
  16. Aigor
    Make the backups for everything you can't reproduce, for the configuration, and, if you have, for example DNS installed, for the zone
  17. Aigor
    Cool! can you explain howto? I have same situation but in a bare metal Gen8, i have DSM 6.2.3 with DS3617xs
  18. Aigor
    It seems it doesn't work dude@testdsm7:~$ ./synoarchive -vxf DSM_DS3622xs+_42550.pat -C . option -x with value `(null)' option -f with value `DSM_DS3622xs+_42550.pat' option -C with value `.' synoarchive_open (null) failed. ret: 63 dude@testdsm7:~$
  19. Aigor
    It works even with spk?
  20. Aigor
    Cool, the patch comes from?
  21. Aigor
    Doh! the end of the project?
  22. Aigor
    Howto open pat file? 7zip and winrar seem doesn't work
  23. Aigor
    Now is working
  24. Aigor
    Nope, there is a demo in a spksrc tree that not involves the use of sources spksrc is a framework to help to build package for synology, it offers a environment on which you can build packages for many arhch with one command https://github.com/SynoCommunity/spksrc EDIT: i would like to try to port fog project into synology, is there someone interested in helping? https://fogproject.org/ Thanks
  25. Aigor
    I would like to build my own spk starting from already exist. I have already tested a "workaround" make tar of ts3 folder from dsm 6.3 system, untar on new system. in this way you lost ability to start and stop via panel, but application runs well Thanks for advice
×
×
  • Create New...