Jump to content
XPEnology Community

Aigor

Member
 View Profile  See their activity

  • Posts

    690

  • Joined

  • Last visited

  • Days Won

    6

 Content Type 

Posts posted by Aigor

    Is it possible to install Xpenology on to original Synology (for example, DS220+)?

    in The Noob Lounge

    Posted · Edited by Aigor

    I think is not possibile, but you can try to fix.
    Mac address and serial number are on the paper box, you need to replace broken bios chip and flash bios into new chip.
    If you download .pat file, you can open it with Winrar, into archive you can view bios file and DSM , you can extract bios file and write them into new chip via eeprom programmer.
    It works if you have some soldering skills and right tools, hot air station and eeprom programmer 

    Recupero dati in RAID5 xpenology DSM 6.1.7-15284 UPDATE3 dopo aggiornamento accidentale alla versione DSM 6.2.4-25556

    in ITALIAN

    Posted

    Il raid di synology non è altro che un raid linux fatto con gli strumenti di linux.
    Per recuperare i dati dovresti usare sysresccd che è una distro linux live che ti permette di assemblare il raid , montarlo e leggerne i dati.
    Ovviamente per fare il backup devi avere un disco della capienza necessaria a contenere il backup.
    Per i comandi, ti rimando a google, non me li ricordo a memoria 

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    Hi, I was on building loader for RS4021xs+ 7.2, on a gen8 server with microsd 8 gbyte card card,but it seems that TCRP has some space problem 

      

    Mounting /dev/sdc1 to localdiskp1
Mounting /dev/sdc2 to localdiskp2
cp: error writing 'localdiskp1/rd.gz': No space left on device
cp: error writing 'localdiskp1/zImage': No space left on device
Replacing set root with filesystem UUID instead
sed: couldn't flush localdiskp1/boot/grub/sednFt9Pw: No space left on device
Creating tinycore entry
menuentry 'Tiny Core Image Build' {
        savedefault
        search --set=root --fs-uuid 6234-C863 --hint hd0,msdos3
        echo Loading Linux...
        linux /vmlinuz64 loglevel=3 cde waitusb=5 vga=791
        echo Loading initramfs...
        initrd /corepure64.gz
        echo Booting TinyCore for loader creation
}
Entries in Localdisk bootloader :
=======================================================================
menuentry 'RedPill RS4021xs+ v7.2.0-64551 Beta (USB, Verbose)' {
menuentry 'RedPill RS4021xs+ v7.2.0-64551 Beta (SATA, Verbose)' {
menuentry 'Tiny Core Image Build' {
Updated user_config with USB Command Line : withefi earlyprintk syno_hw_version=RS4021xs+ console=ttyS0,115200n8 netif_num=1 pid=0x4030 earlycon=uart8250,io,0x3f8,115200n8 syno_port_thaw=1 mac1=D0BF9C459480 sn=2250T2RB8WPWA vid=0x0424 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=1
Updated user_config with SATA Command Line : withefi earlyprintk syno_hw_version=RS4021xs+ console=ttyS0,115200n8 netif_num=1 pid=0x4030 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=D0BF9C459480 sn=2250T2RB8WPWA vid=0x0424 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=1
Cleaning up files
Caching files for future use
No adequate space on TCRP loader partition /mnt/sdc3 to cache pat file
Found /mnt/sdc3/auxfiles/rs4021xsp_64551.pat file
Removing older cached pat files to cache current
Found /home/tc/redpill-load/cache/rs4021xsp_64551.pat, copying to cache directory : /mnt/sdc3/auxfiles
Saving user session for future use. Saving current extensions  -> OK !
Saving current user_config.json  -> OK !

     

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    2 hours ago, Andy Miller said:

     

    Kinda defeats the purpose. 

     

    I have a dual 10g intel card and a 10g unifi switch. why would i want to remove it?

     

    Is there another way i can get the intel card working?? i have disabled all the onboard intel gigabit nics in bios, the only ones presented to xpenology are the 2 10g connections on the x520 card but im never able to find it on the network?

     

    Not removing, simply disabling until the installation ends
    Install without card, shutdown server, reinstall card, reboot 

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted · Edited by Aigor

    On 1/21/2023 at 10:08 PM, Andy Miller said:

    After being point here from The arpl thread I’m attempting to install tcrp using the menu. I have booted into the image to be presented with a never ending “waiting on internet activation” error. And yes before anyone asks the obvious I have 3 current lan connections to this box. 1 1gb copper and 2 10gb fibers. It’s not lack of connectivity. 
     

    thanks.

    Try to disable two of them, or remove 10Gbit card
    I had to do to install my xpenology on Gen 8 microserver 

     

    Deduplication with Gen8 microserver

    in General Questions

    Posted

    Hi, i already have Gen8 with DSM 7.1-42661 Update 1 with hardware DS3622xs+, I would like to use deduplication, but only these models seems able to do deduplication

      

    FS-series
FS6400, FS3600, FS3410, FS3400
SA-series
SA6400, SA3610, SA3600, SA3410, SA3400
21-series
RS4021xs+, RS3621xs+2, RS3621RPxs2

    My question is, is there some loader that support one of there models that can run on my Gen8 microserver?  
    My cpu is Intel(R) Xeon(R) CPU E31220 @ 3.10GHz

     

    Thanks 

    DS3622xs+ into dell optiplex 360

    in DSM 7.x

    Posted

    1 hour ago, pocopico said:

    Are your disks SATA AHCI ? And on which controller they are attached to ? Can you please share an lspci -nnq from within TCRP ? 

    Yes, there Intel ICH7 

      

    tc@box:~$ lspci -nnq
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 0a)
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 0a)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 0a)
00:02.1 Display controller [0380]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c3] (rev 0a)
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
02:00.0 Ethernet controller [0200]: Broadcom Limited NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10)
tc@box:~$

     

    DS3622xs+ into dell optiplex 360

    in DSM 7.x

    Posted · Edited by Aigor

    Hi friends, I'm trying to install last dsm for DS3622xs+ via last TCRP into Dell Optiplex 360 with two sata disk, but disks are not recognized when I'm connecting to system.
    All steps for build loader went well, even satamap that shows 1 but it seems that disks are missing 
    What o have to check? 
    Thanks 

     

    Vmtools Packahe Repos

    in Third Party Packages

    Posted

    Hi friends, i'm experimenting a spk packages server, if you would like, put this 
      

    http://spks.ildude.com/

    Into source package, actually there are several version of openvmtools and URbackup for broadwellnk , if you want, test them and report 
    Thanks 

    • Thanks 1

    openvmtools kernel requirements

    in Developer Discussion Room

    Posted

    Hi, OPenvmtools seems works as expected, in normal implementation there are others kernel modules that are optional but i would like to try to add and see if are needed or not.
    I compiled lkm using synology source kernel, but there is an option in the kernel that cant be compiled as modules.
    My question is, could be possible, using redpill framework, add this option to a kernel and put this kernel with this option into pat file? 
    For the modules could be use a pocopico extension framework to add specific modules into zImage 
    The options are  
      

    CONFIG_HYPERVISOR_GUEST=y
CONFIG_SYS_HYPERVISOR=y
CONFIG_VMWARE_VMCI_VSOCKETS=m
CONFIG_VMWARE_BALLOON=m
CONFIG_VMWARE_VMCI=m

    Thanks 

     

    TinyCore RedPill Loader (TCRP)

    in Loaders

    Posted

    11 minutes ago, Bobwin said:


    USB Loader is unfortunately not possible with synology VMM. 
    What I don’t get is that it is possible to install XPE with the Jun loader, but as your probably know that is limited to DSM 6.2.3. 

     

    Netboot? 

     

×
×
  • Create New...