Hello, thank you again for all the work;)
I have been running an aspire one D270 for several years which works very well. I upgraded to version 6.2.3 by overwriting the old 6.1 system.
the original network card is in 100Mb / s is detected without EXTRA, not having USB3, I decided to replace the internal WiFi network card (which is not used), by a Gigabit LAN card
(https://www.amazon.fr/gp/product/B00B524102/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1).
so i added extra.lzma (for loader 1.03b ds3615 DSM 6.2.3 v0.11_test).
the pack works because my USB LAN card is now detected.
I therefore mounted the mPCI-E card, but it does not seem to be detected: /
the component is marked: 8111H when it should be RTL8168C as described on Amazon.
so I don't know if it's a driver problem, or if the mPCI-E port isn't working.
here is my dmesg, if anyone has any lead i thank them in advance.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.105 (root@build1) (gcc version 4.9.3 20150311 (prerelease) (crosstool-NG 1.20.0) ) #25426 SMP Wed Jul 8 03:11:49 CST 2020
[ 0.000000] Command line: syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=B3J4N01003 mac1=089E01066986 netif_num=1 vid=0x0011 pid=0x7788
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f4aefff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f4af000-0x000000007f5aefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007f5af000-0x000000007f6aefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007f6af000-0x000000007f6eefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007f6ef000-0x000000007f6effff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007f6f0000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer AOD270/JE01_CT , BIOS V1.10 07/23/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7f6f0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 base 07F6F0000 mask FFFFF0000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] found SMP MP-table at [mem 0x000fe260-0x000fe26f] mapped at [ffff8800000fe260]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01acb000, 0x01acbfff] PGTABLE
[ 0.000000] BRK [0x01acc000, 0x01accfff] PGTABLE
[ 0.000000] BRK [0x01acd000, 0x01acdfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7f200000-0x7f3fffff]
[ 0.000000] [mem 0x7f200000-0x7f3fffff] page 2M
[ 0.000000] BRK [0x01ace000, 0x01acefff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7f1fffff]
[ 0.000000] [mem 0x7c000000-0x7f1fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x7f400000-0x7f4aefff]
[ 0.000000] [mem 0x7f400000-0x7f4aefff] page 4k
[ 0.000000] BRK [0x01acf000, 0x01acffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7f6ef000-0x7f6effff]
[ 0.000000] [mem 0x7f6ef000-0x7f6effff] page 4k
[ 0.000000] BRK [0x01ad0000, 0x01ad0fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x364db000-0x37ffffff]
[ 0.000000] ACPI: RSDP 0x00000000000FE020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000007F6EE120 0008C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000007F6ED000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x000000007F6E1000 0786E (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x000000007F675000 00040
[ 0.000000] ACPI: HPET 0x000000007F6EC000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x000000007F6EB000 00078 (v02 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x000000007F6EA000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: WDRT 0x000000007F6E9000 00047 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: SLIC 0x000000007F6E0000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: BOOT 0x000000007F6DF000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x000000007F6DE000 00055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x000000007F6DC000 00090 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000007F6DB000 00655 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000007F6DA000 00259 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000007F6D9000 0020F (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: WDAT 0x000000007F6D8000 00194 (v01 INSYDE H2O BIOS 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007cc00000-ffff88007e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x7f4aefff]
[ 0.000000] node 0: [mem 0x7f6ef000-0x7f6effff]
[ 0.000000] On node 0 totalpages: 521293
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7081 pages used for memmap
[ 0.000000] DMA32 zone: 517296 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007f4af000 - 000000007f5af000
[ 0.000000] PM: Registered nosave memory: 000000007f5af000 - 000000007f6af000
[ 0.000000] PM: Registered nosave memory: 000000007f6af000 - 000000007f6ef000
[ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88007f200000 s76864 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s76864 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514135
[ 0.000000] Kernel command line: syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1 root=/dev/md0 sn=B3J4N01003 mac1=089E01066986 netif_num=1 vid=0x0011 pid=0x7788
[ 0.000000] Power on seq num: 0
[ 0.000000] Synology Hardware Version: DS3615xs-j
[ 0.000000] Vender format version: 2
[ 0.000000] Serial Number: B3J4N01003
[ 0.000000] Mac1: 089E01066986
[ 0.000000] Internal netif num: 1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 2013948k/2087872k available (4944k kernel code, 2700k absent, 71224k reserved, 3707k data, 792k init)
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1595.859 MHz processor
[ 0.000007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3191.71 BogoMIPS (lpj=1595859)
[ 0.000014] pid_max: default: 32768 minimum: 301
[ 0.000098] Security Framework initialized
[ 0.000121] AppArmor: AppArmor initialized
[ 0.000150] Mount-cache hash table entries: 256
[ 0.000587] Initializing cgroup subsys memory
[ 0.000621] Initializing cgroup subsys devices
[ 0.000628] Initializing cgroup subsys freezer
[ 0.000632] Initializing cgroup subsys blkio
[ 0.000688] CPU: Physical Processor ID: 0
[ 0.000692] CPU: Processor Core ID: 0
[ 0.000696] mce: CPU supports 5 MCE banks
[ 0.000708] CPU0: Thermal monitoring handled by SMI
[ 0.000722] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[ 0.000728] FEATURE SPEC_CTRL Not Present
[ 0.000731] FEATURE IBPB_SUPPORT Not Present
[ 0.000737] Spectre V2 : Vulnerable
[ 0.000874] Freeing SMP alternatives: 24k freed
[ 0.000894] ACPI: Core revision 20130328
[ 0.010363] ACPI: All ACPI Tables successfully acquired
[ 0.011042] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.021081] smpboot: CPU0: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz (fam: 06, model: 36, stepping: 01)
[ 0.123029] Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
[ 0.123043] ... version: 3
[ 0.123047] ... bit width: 40
[ 0.123050] ... generic registers: 2
[ 0.123053] ... value mask: 000000ffffffffff
[ 0.123057] ... max period: 000000007fffffff
[ 0.123060] ... fixed-purpose events: 3
[ 0.123063] ... event mask: 0000000700000003
[ 0.135195] CPU1: Thermal monitoring handled by SMI
[ 0.148680] CPU2: Thermal monitoring handled by SMI
[ 0.124134] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.162138] CPU3: Thermal monitoring handled by SMI
[ 0.164322] Brought up 4 CPUs
[ 0.164334] smpboot: Total of 4 processors activated (12766.87 BogoMIPS)
[ 0.165028] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.165751] devtmpfs: initialized
[ 0.166477] PM: Registering ACPI NVS region [mem 0x7f5af000-0x7f6aefff] (1048576 bytes)
[ 0.166933] xor: measuring software checksum speed
[ 0.176047] prefetch64-sse: 5400.000 MB/sec
[ 0.186053] generic_sse: 4884.000 MB/sec
[ 0.186057] xor: using function: prefetch64-sse (5400.000 MB/sec)
[ 0.186207] NET: Registered protocol family 16
[ 0.187735] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.187742] ACPI: bus type PCI registered
[ 0.188160] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.188168] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.188935] PCI: Using configuration type 1 for base access
[ 0.206404] bio: create slab <bio-0> at 0
[ 0.223159] raid6: sse2x1 gen() 136 MB/s
[ 0.240123] raid6: sse2x1 xor() 708 MB/s
[ 0.257147] raid6: sse2x2 gen() 414 MB/s
[ 0.274124] raid6: sse2x2 xor() 1152 MB/s
[ 0.291193] raid6: sse2x4 gen() 699 MB/s
[ 0.308120] raid6: sse2x4 xor() 1328 MB/s
[ 0.308126] raid6: using algorithm sse2x4 gen() (699 MB/s)
[ 0.308129] raid6: .... xor() 1328 MB/s, rmw enabled
[ 0.308133] raid6: using ssse3x2 recovery algorithm
[ 0.308250] ACPI: Added _OSI(Module Device)
[ 0.308256] ACPI: Added _OSI(Processor Device)
[ 0.308264] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.308268] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.310888] ACPI: EC: Look up EC in DSDT
[ 0.319824] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.329375] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.338281] ACPI: SSDT 0x000000007F567A90 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.338931] ACPI: Dynamic OEM Table Load:
[ 0.338938] ACPI: SSDT 0x0000000000000000 002E9 (v01 PmRef Cpu0Ist 00003000 INTL 20100121)
[ 0.339262] ACPI: SSDT 0x000000007F566710 006DB (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.339884] ACPI: Dynamic OEM Table Load:
[ 0.339891] ACPI: SSDT 0x0000000000000000 006DB (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.345833] ACPI: SSDT 0x000000007F567E10 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.346526] ACPI: Dynamic OEM Table Load:
[ 0.346533] ACPI: SSDT 0x0000000000000000 001CF (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.349644] ACPI: SSDT 0x000000007F565F10 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.350284] ACPI: Dynamic OEM Table Load:
[ 0.350290] ACPI: SSDT 0x0000000000000000 0008D (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.355108] ACPI: Interpreter enabled
[ 0.355147] ACPI: (supports S0 S4 S5)
[ 0.355153] ACPI: Using IOAPIC for interrupt routing
[ 0.355367] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.355610] ACPI: No dock devices found.
[ 0.376766] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.376881] \_SB_.PCI0:_OSC invalid UUID
[ 0.376886] _OSC request data:1 8 0
[ 0.377000] \_SB_.PCI0:_OSC invalid UUID
[ 0.377004] _OSC request data:1 1f 0
[ 0.377016] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.377022] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.377769] PCI host bridge to bus 0000:00
[ 0.377779] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.377786] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.377792] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.377798] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.377804] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.377810] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
[ 0.377816] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.377822] pci_bus 0000:00: root bus resource [mem 0x7f800000-0x7fffffff]
[ 0.377828] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.377847] pci 0000:00:00.0: [8086:0bf1] type 00 class 0x060000
[ 0.378158] pci 0000:00:02.0: [8086:0be1] type 00 class 0x030000
[ 0.378182] pci 0000:00:02.0: reg 10: [mem 0x86000000-0x860fffff]
[ 0.378193] pci 0000:00:02.0: reg 14: [io 0x50d0-0x50d7]
[ 0.378549] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.378587] pci 0000:00:1b.0: reg 10: [mem 0x86100000-0x86103fff 64bit]
[ 0.378736] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.379063] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.379222] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.379350] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.379528] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.379684] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.379964] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.380119] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.380401] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.380508] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
[ 0.380693] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.380913] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.380999] pci 0000:00:1d.1: reg 20: [io 0x5080-0x509f]
[ 0.381178] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.381353] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.381450] pci 0000:00:1d.2: reg 20: [io 0x5060-0x507f]
[ 0.381627] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.381803] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.381887] pci 0000:00:1d.3: reg 20: [io 0x5040-0x505f]
[ 0.382073] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.382272] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.382312] pci 0000:00:1d.7: reg 10: [mem 0x86105000-0x861053ff]
[ 0.382495] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.382641] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.382853] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.383221] pci 0000:00:1f.0: [8086:27bc] type 00 class 0x060100
[ 0.383650] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[ 0.383688] pci 0000:00:1f.2: reg 10: [io 0x50c8-0x50cf]
[ 0.383708] pci 0000:00:1f.2: reg 14: [io 0x50dc-0x50df]
[ 0.383727] pci 0000:00:1f.2: reg 18: [io 0x50c0-0x50c7]
[ 0.383746] pci 0000:00:1f.2: reg 1c: [io 0x50d8-0x50db]
[ 0.383765] pci 0000:00:1f.2: reg 20: [io 0x5020-0x502f]
[ 0.383785] pci 0000:00:1f.2: reg 24: [mem 0x86104000-0x861043ff]
[ 0.383868] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.384131] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.384217] pci 0000:00:1f.3: reg 20: [io 0x5000-0x501f]
[ 0.384818] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 0.384895] pci 0000:01:00.0: reg 10: [io 0x4000-0x40ff]
[ 0.385027] pci 0000:01:00.0: reg 18: [mem 0x80004000-0x80004fff 64bit pref]
[ 0.385108] pci 0000:01:00.0: reg 20: [mem 0x80000000-0x80003fff 64bit pref]
[ 0.385465] pci 0000:01:00.0: supports D1 D2
[ 0.385471] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.385615] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.385857] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.385868] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.385878] pci 0000:00:1c.0: bridge window [mem 0x85000000-0x85ffffff]
[ 0.385892] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x80ffffff 64bit pref]
[ 0.386112] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.386123] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.386133] pci 0000:00:1c.1: bridge window [mem 0x84000000-0x84ffffff]
[ 0.386147] pci 0000:00:1c.1: bridge window [mem 0x81000000-0x81ffffff 64bit pref]
[ 0.386504] pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
[ 0.386582] pci 0000:03:00.0: reg 10: [mem 0x83001000-0x83001fff]
[ 0.387137] pci 0000:03:00.0: supports D1 D2
[ 0.387142] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 0.387268] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.387516] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.387527] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.387537] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x83ffffff]
[ 0.387552] pci 0000:00:1c.2: bridge window [mem 0x82000000-0x82ffffff 64bit pref]
[ 0.387794] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.387818] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.387825] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.387831] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.387838] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.387844] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
[ 0.387850] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.387857] pci 0000:00:1e.0: bridge window [mem 0x7f800000-0x7fffffff] (subtractive decode)
[ 0.387863] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.387910] pci_bus 0000:00: on NUMA node 0
[ 0.388827] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15), disabled.
[ 0.388996] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.389163] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.389328] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.389502] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.389663] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.389824] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *7 10 12 14 15), disabled.
[ 0.389986] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.390600] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.390619] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.390726] Found 1 acpi root devices
[ 0.390826] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.391406] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.391419] vgaarb: loaded
[ 0.391422] vgaarb: bridge control possible 0000:00:02.0
[ 0.391927] SCSI subsystem initialized
[ 0.391939] ACPI: bus type ATA registered
[ 0.392354] libata version 3.00 loaded.
[ 0.392764] pps_core: LinuxPPS API ver. 1 registered
[ 0.392770] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.392867] PTP clock support registered
[ 0.393265] PCI: Using ACPI for IRQ routing
[ 0.407887] PCI: pci_cache_line_size set to 64 bytes
[ 0.407995] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.408001] e820: reserve RAM buffer [mem 0x7f4af000-0x7fffffff]
[ 0.408006] e820: reserve RAM buffer [mem 0x7f6f0000-0x7fffffff]
[ 0.408805] Switching to clocksource hpet
[ 0.409122] AppArmor: AppArmor Filesystem Enabled
[ 0.409360] pnp: PnP ACPI init
[ 0.409389] ACPI: bus type PNP registered
[ 0.409754] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.410012] pnp 00:01: Plug and Play ACPI device, IDs SYN1b20 SYN1b00 SYN0002 PNP0f13 (active)
[ 0.410044] pnp 00:02: [dma 4]
[ 0.410216] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.410403] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.410820] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.410831] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.411111] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.411378] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.411387] system 00:06: [io 0x1000-0x1003] has been reserved
[ 0.411394] system 00:06: [io 0x1010-0x101f] has been reserved
[ 0.411401] system 00:06: [io 0x1004-0x1007] has been reserved
[ 0.411408] system 00:06: [io 0x0400-0x047f] could not be reserved
[ 0.411414] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.411425] system 00:06: [io 0x0600-0x061f] has been reserved
[ 0.411434] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.411729] system 00:07: [io 0x06a0-0x06af] has been reserved
[ 0.411737] system 00:07: [io 0x06b0-0x06ff] has been reserved
[ 0.411745] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412013] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.412508] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.412518] system 00:09: [mem 0x00000000-0x00003fff] could not be reserved
[ 0.412525] system 00:09: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.412532] system 00:09: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.412539] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.412547] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.412949] pnp: PnP ACPI: found 10 devices
[ 0.412954] ACPI: bus type PNP unregistered
[ 0.434499] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.434512] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.434525] pci 0000:00:1c.0: bridge window [mem 0x85000000-0x85ffffff]
[ 0.434536] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x80ffffff 64bit pref]
[ 0.434550] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.434558] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.434570] pci 0000:00:1c.1: bridge window [mem 0x84000000-0x84ffffff]
[ 0.434580] pci 0000:00:1c.1: bridge window [mem 0x81000000-0x81ffffff 64bit pref]
[ 0.434594] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.434602] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.434614] pci 0000:00:1c.2: bridge window [mem 0x83000000-0x83ffffff]
[ 0.434624] pci 0000:00:1c.2: bridge window [mem 0x82000000-0x82ffffff 64bit pref]
[ 0.434637] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.435136] pci 0000:00:1e.0: setting latency timer to 64
[ 0.435147] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.435153] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.435159] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.435165] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.435171] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
[ 0.435177] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.435183] pci_bus 0000:00: resource 10 [mem 0x7f800000-0x7fffffff]
[ 0.435189] pci_bus 0000:00: resource 11 [mem 0x80000000-0xfebfffff]
[ 0.435196] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.435202] pci_bus 0000:01: resource 1 [mem 0x85000000-0x85ffffff]
[ 0.435208] pci_bus 0000:01: resource 2 [mem 0x80000000-0x80ffffff 64bit pref]
[ 0.435214] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.435220] pci_bus 0000:02: resource 1 [mem 0x84000000-0x84ffffff]
[ 0.435226] pci_bus 0000:02: resource 2 [mem 0x81000000-0x81ffffff 64bit pref]
[ 0.435232] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.435238] pci_bus 0000:03: resource 1 [mem 0x83000000-0x83ffffff]
[ 0.435244] pci_bus 0000:03: resource 2 [mem 0x82000000-0x82ffffff 64bit pref]
[ 0.435251] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.435256] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.435262] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.435268] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.435274] pci_bus 0000:04: resource 8 [mem 0x000e0000-0x000effff]
[ 0.435280] pci_bus 0000:04: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.435286] pci_bus 0000:04: resource 10 [mem 0x7f800000-0x7fffffff]
[ 0.435292] pci_bus 0000:04: resource 11 [mem 0x80000000-0xfebfffff]
[ 0.435461] NET: Registered protocol family 2
[ 0.436091] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.436258] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.436410] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.436544] TCP: reno registered
[ 0.436558] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.436592] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.436833] NET: Registered protocol family 1
[ 0.437207] RPC: Registered named UNIX socket transport module.
[ 0.437213] RPC: Registered udp transport module.
[ 0.437217] RPC: Registered tcp transport module.
[ 0.437220] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.437244] pci 0000:00:02.0: Boot video device
[ 0.438650] PCI: CLS 64 bytes, default 64
[ 0.438774] Trying to unpack rootfs image as initramfs...
[ 2.915221] Freeing initrd memory: 27796k freed
[ 2.942380] ttnptmsrayfraeg: module verification failed: signature and/or required key missing - tainting kernel
[ 2.978407] Simple Boot Flag at 0x44 set to 0x1
[ 3.022884] Initialise module verification
[ 3.023059] audit: initializing netlink socket (disabled)
[ 3.023104] type=2000 audit(1596908479.898:1): initialized
[ 3.043782] bounce pool size: 64 pages
[ 3.046945] VFS: Disk quotas dquot_6.5.2
[ 3.047043] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 3.047834] NFS: Registering the id_resolver key type
[ 3.047870] Key type id_resolver registered
[ 3.047876] Key type id_legacy registered
[ 3.047931] msgmni has been set to 3987
[ 3.048603] async_tx: api initialized (async)
[ 3.048619] Key type asymmetric registered
[ 3.048626] Asymmetric key parser 'x509' registered
[ 3.049064] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 3.049077] io scheduler noop registered
[ 3.049083] io scheduler deadline registered
[ 3.049141] io scheduler cfq registered (default)
[ 3.051681] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 3.055068] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 3.058713] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 3.982212] tsc: Refined TSC clocksource calibration: 1596.000 MHz
[ 3.982229] Switching to clocksource tsc
[ 5.177582] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 5.185328] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 8250
[ 5.411053] brd: module loaded
[ 5.429424] ACPI Warning: 0x0000000000000428-0x000000000000042F SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-249)
[ 5.429448] ACPI Warning: 0x0000000000000428-0x000000000000042F SystemIO conflicts with Region \SWC1 2 (20130328/utaddress-249)
[ 5.429464] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.429474] Unknown LPC device 27bc
[ 5.429481] ACPI Warning: 0x0000000000000530-0x000000000000053F SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-249)
[ 5.429495] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.429502] ACPI Warning: 0x0000000000000500-0x000000000000052F SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-249)
[ 5.429515] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.429520] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 5.445497] Loading iSCSI transport class v2.0-870.
[ 5.535385] rdac: device handler registered
[ 5.546473] ahci 0000:00:1f.2: version 3.0
[ 5.546840] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 5.547072] ahci: SSS flag set, parallel bus scan disabled
[ 5.547158] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 5.547173] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[ 5.547196] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.598952] scsi0 : ahci
[ 5.609793] scsi1 : ahci
[ 5.615619] scsi2 : ahci
[ 5.622444] scsi3 : ahci
[ 5.626645] ata1: SATA max UDMA/133 abar m1024@0x86104000 port 0x86104100 irq 43
[ 5.626660] ata2: SATA max UDMA/133 abar m1024@0x86104000 port 0x86104180 irq 43
[ 5.626666] ata3: DUMMY
[ 5.626671] ata4: DUMMY
[ 5.656350] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 5.670790] i8042: Detected active multiplexing controller, rev 1.1
[ 5.674443] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.674468] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 5.674478] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 5.674487] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 5.674495] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 5.674934] rtc_cmos 00:08: RTC can wake from S4
[ 5.676657] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 5.676730] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 5.687562] i2c /dev entries driver
[ 5.713323] coretemp coretemp.0: Unable to read TjMax from CPU 0
[ 5.713374] coretemp coretemp.0: Unable to read TjMax from CPU 2
[ 5.713435] md: linear personality registered for level -1
[ 5.713441] md: raid0 personality registered for level 0
[ 5.713446] md: raid1 personality registered for level 1
[ 5.713451] md: raid10 personality registered for level 10
[ 5.717223] md: raid6 personality registered for level 6
[ 5.717233] md: raid5 personality registered for level 5
[ 5.717238] md: raid4 personality registered for level 4
[ 5.717243] md: raidF1 personality registered for level 45
[ 5.721348] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[ 5.721364] cpuidle: using governor ladder
[ 5.721370] cpuidle: using governor menu
[ 5.721641] TCP: cubic registered
[ 5.721651] NET: Registered protocol family 17
[ 5.721738] Key type dns_resolver registered
[ 5.931337] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.937988] ata1.00: ATA-8: ST2000LM003 HN-M201RAD, 2BC10001, max UDMA/133
[ 5.938011] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 5.938016] ata1.00: SN:S321J9FFC00339
[ 5.944728] ata1.00: configured for UDMA/133
[ 5.951478] scsi 0:0:0:0: Direct-Access ST2000LM HN-M201RAD 2BC1 PQ: 0 ANSI: 5
[ 5.952983] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 5.952994] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.953224] sd 0:0:0:0: [sda] Write Protect is off
[ 5.953235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.953422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.003490] sda: sda1 sda2 sda3 < sda5 >
[ 6.008039] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.260537] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.260639] ata3: send port disabled event
[ 6.260923] ata4: send port disabled event
[ 6.261199] Loading module verification blacklist certificates
[ 6.261204] Loading module verification certificates
[ 6.261265] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
[ 6.267008] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
[ 6.267054] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
[ 6.267104] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
[ 6.267125] registered taskstats version 1
[ 6.267826] rtc_cmos 00:08: setting system clock to 2020-08-08 17:41:23 UTC (1596908483)
[ 6.269797] Freeing unused kernel memory: 792k freed
[ 6.270304] Write protecting the kernel read-only data: 8192k
[ 6.270821] Freeing unused kernel memory: 1188k freed
[ 6.274921] Freeing unused kernel memory: 424k freed
[ 6.513171] ACPI: bus type USB registered
[ 6.513902] usbcore: registered new interface driver usbfs
[ 6.514258] usbcore: registered new interface driver hub
[ 6.517089] usbcore: registered new interface driver ethub
[ 6.523508] usbcore: registered new device driver usb
[ 6.587599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.610377] ehci-pci: EHCI PCI platform driver
[ 6.610620] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 6.610641] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 6.610658] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 6.610719] ehci-pci 0000:00:1d.7: debug port 1
[ 6.614668] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 6.614726] ehci-pci 0000:00:1d.7: irq 17, io mem 0x86105000
[ 6.620755] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.621666] hub 1-0:1.0: USB hub found
[ 6.621714] hub 1-0:1.0: 8 ports detected
[ 6.659765] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.689262] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.689587] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.689602] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.689627] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 6.689701] uhci_hcd 0000:00:1d.0: irq 17, io base 0x000050a0
[ 6.690955] hub 2-0:1.0: USB hub found
[ 6.690985] hub 2-0:1.0: 2 ports detected
[ 6.691443] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.691456] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.691485] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 6.691579] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[ 6.693027] hub 3-0:1.0: USB hub found
[ 6.693059] hub 3-0:1.0: 2 ports detected
[ 6.693591] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.693606] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.693631] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 6.693773] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[ 6.701654] hub 4-0:1.0: USB hub found
[ 6.701687] hub 4-0:1.0: 2 ports detected
[ 6.702238] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 6.702254] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 6.702279] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 6.702399] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005040
[ 6.713900] hub 5-0:1.0: USB hub found
[ 6.713932] hub 5-0:1.0: 2 ports detected
[ 6.889341] usbcore: registered new interface driver usb-storage
[ 6.944970] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 6.987656] VMware PVSCSI driver - version 1.0.2.0-k
[ 7.013361] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 7.039990] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 7.092193] Fusion MPT base driver 3.04.20
[ 7.092201] Copyright (c) 1999-2008 LSI Corporation
[ 7.138342] Fusion MPT SPI Host driver 3.04.20
[ 7.165461] Fusion MPT SAS Host driver 3.04.20
[ 7.171354] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 7.177720] scsi4 : usb-storage 1-2:1.0
[ 7.207126] Fusion MPT misc device (ioctl) driver 3.04.20
[ 7.207653] mptctl: Registered with Fusion MPT base driver
[ 7.207666] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 7.240674] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[ 7.279887] mpt2sas version 20.00.00.00 loaded
[ 7.306164] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 7.309374] mpt3sas version 01.100.01.00 loaded
[ 7.364291] Adaptec aacraid driver 1.2-0[30200]-ms
[ 7.390740] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 7.416863] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 7.442694] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 7.469504] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 7.576375] isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
[ 7.579430] Got empty serial number. Generate serial number from product.
[ 7.744864] bromolow_synobios: module license 'Synology Inc.' taints kernel.
[ 7.744872] Disabling lock debugging due to kernel taint
[ 7.746205] 2020-8-8 17:41:25 UTC
[ 7.746218] synobios: load, major number 201
[ 7.746232] Brand: Synology
[ 7.746238] Model: DS-3615xs
[ 7.746248] set group disks wakeup number to 4, spinup time deno 7
[ 7.746271] synobios cpu_arch proc entry initialized
[ 7.746278] synobios crypto_hw proc entry initialized
[ 7.746288] synobios syno_platform proc entry initialized
[ 7.746321] synobios open /dev/ttyS1 success
[ 7.765217] synobios: unload
[ 7.798578] md: Autodetecting RAID arrays.
[ 7.862581] md: invalid raid superblock magic on sda5
[ 7.862856] md: sda5 does not have a valid v0.90 superblock, not importing!
[ 7.862877] md: Scanned 3 and added 2 devices.
[ 7.862881] md: autorun ...
[ 7.862885] md: considering sda1 ...
[ 7.862897] md: adding sda1 ...
[ 7.862905] md: sda2 has different UUID to sda1
[ 7.862916] md: created md0
[ 7.862921] md: bind<sda1>
[ 7.862952] md: running: <sda1>
[ 7.863605] md/raid1:md0: active with 1 out of 12 mirrors
[ 7.904385] md0: detected capacity change from 0 to 2549940224
[ 7.904683] md: considering sda2 ...
[ 7.904697] md: adding sda2 ...
[ 7.905772] md: created md1
[ 7.905784] md: bind<sda2>
[ 7.905822] md: running: <sda2>
[ 7.906569] md/raid1:md1: active with 1 out of 12 mirrors
[ 7.926537] md1: detected capacity change from 0 to 2147418112
[ 7.927377] md: ... autorun DONE.
[ 7.982045] md0: unknown partition table
[ 8.189941] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
[ 8.192841] sd 4:0:0:0: [synoboot] 7987200 512-byte logical blocks: (4.08 GB/3.80 GiB)
[ 8.193587] sd 4:0:0:0: [synoboot] Write Protect is off
[ 8.193601] sd 4:0:0:0: [synoboot] Mode Sense: 03 00 00 00
[ 8.194338] sd 4:0:0:0: [synoboot] No Caching mode page found
[ 8.194705] sd 4:0:0:0: [synoboot] Assuming drive cache: write through
[ 8.212595] sd 4:0:0:0: [synoboot] No Caching mode page found
[ 8.212947] sd 4:0:0:0: [synoboot] Assuming drive cache: write through
[ 8.291666] synoboot: synoboot1 synoboot2 synoboot3
[ 8.296319] sd 4:0:0:0: [synoboot] No Caching mode page found
[ 8.296665] sd 4:0:0:0: [synoboot] Assuming drive cache: write through
[ 8.297066] sd 4:0:0:0: [synoboot] Attached SCSI removable disk
[ 9.237619] EXT4-fs (md0): barriers disabled
[ 9.261019] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts:
[ 11.847328] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1
[ 13.924674] EXT4-fs (md0): re-mounted. Opts: (null)
[ 22.188059] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.188274] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 22.769175] md1: unknown partition table
[ 22.949884] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k
[ 23.459968] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 23.461966] zram: Created 2 device(s) ...
[ 23.504957] Adding 613372k swap on /dev/zram0. Priority:1 extents:1 across:613372k SS
[ 23.536631] Adding 613372k swap on /dev/zram1. Priority:1 extents:1 across:613372k SS
[ 26.653313] NET: Registered protocol family 10
[ 26.705519] sit: IPv6 over IPv4 tunneling driver
[ 27.455813] init: syno-auth-check main process (5511) killed by TERM signal
[ 27.870965] ACPI: Requesting acpi_cpufreq
[ 27.875933] Monitor-Mwait will be used to enter C-1 state
[ 27.875966] Monitor-Mwait will be used to enter C-2 state
[ 27.875994] ACPI: acpi_idle registered with cpuidle
[ 28.741872] systemd-udevd[5748]: starting version 204
[ 30.727082] fuse init (API version 7.22)
[ 30.827471] dca service started, version 1.12.1
[ 30.891315] e1000e: Intel(R) PRO/1000 Network Driver - 3.6.0-NAPI
[ 30.891327] e1000e: Copyright(c) 1999 - 2019 Intel Corporation.
[ 30.975325] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.39
[ 30.975336] Copyright(c) 2007 - 2019 Intel Corporation.
[ 31.089505] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.6.3
[ 31.089516] Copyright(c) 1999 - 2019 Intel Corporation.
[ 31.136840] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.4.10
[ 31.136852] i40e: Copyright(c) 2013 - 2018 Intel Corporation.
[ 31.195959] tn40xx: Tehuti Network Driver, 0.3.6.17.2
[ 31.196248] tn40xx: Supported phys : MV88X3120 MV88X3310 MV88E2010 QT2025 TLK10232 AQR105 MUSTANG
[ 31.420963] qed_init called
[ 31.421003] QLogic FastLinQ 4xxxx Core Module qed 8.33.9.0
[ 31.421009] creating debugfs root node
[ 31.504452] qede_init: QLogic FastLinQ 4xxxx Ethernet Driver qede 8.33.9.0
[ 31.542199] Loading modules backported from Linux version v3.18.1-0-g39ca484
[ 31.542207] Backport generated by backports.git v3.18.1-1-0-g5e9ec4c
[ 31.668903] Compat-mlnx-ofed backport release: c22af88
[ 31.668910] Backport based on mlnx_ofed/mlnx-ofa_kernel-4.0.git c22af88
[ 31.668914] compat.git: mlnx_ofed/mlnx-ofa_kernel-4.0.git
[ 33.324394] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.78.17-0 (2013/04/11)
[ 33.717171] bio: create slab <bio-1> at 1
[ 33.717719] Btrfs loaded
[ 33.748368] exFAT: Version 1.2.9
[ 33.899343] jme: JMicron JMC2XX ethernet driver version 1.0.8
[ 33.925147] sky2: driver version 1.30
[ 33.951928] pch_gbe: EG20T PCH Gigabit Ethernet Driver - version 1.01
[ 33.980084] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.2.42
[ 34.006885] QLogic/NetXen Network Driver v4.0.80
[ 34.021758] Solarflare NET driver v3.2
[ 34.035834] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 34.035842] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 34.049043] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 34.062455] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
[ 34.117823] igbvf: Intel(R) Gigabit Virtual Function Driver - 2.3.8.2
[ 34.117831] igbvf: Copyright (c) 1999-2015 Intel Corporation.
[ 34.138338] ixgbevf: Intel(R) 10GbE PCI Express Virtual Function Driver - version 4.6.1
[ 34.138348] Copyright(c) 1999 - 2019 Intel Corporation.
[ 34.152971] r8101 Fast Ethernet driver 1.034.03-NAPI loaded
[ 34.153316] r8101 0000:01:00.0: irq 44 for MSI/MSI-X
[ 34.174311] r8101: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
[ 34.174327] eth0: Identified chip type is 'RTL8105E'.
[ 34.174352] r8101 Copyright (C) 2019 Realtek NIC software team <nicfae@realtek.com>
This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 34.255956] usbcore: registered new interface driver ax88179_178a
[ 34.269359] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 34.269377] ACPI: Power Button [PWRB]
[ 34.269534] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 34.269548] ACPI: Sleep Button [SLPB]
[ 34.269714] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 34.269897] ACPI: Lid Switch [LID]
[ 34.270078] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 34.270092] ACPI: Power Button [PWRF]
[ 34.326715] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 34.326723] Copyright (c) 2007 Atheros Corporation.
[ 34.341407] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 34.341415] e100: Copyright(c) 1999-2006 Intel Corporation
[ 34.363415] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI
[ 34.363424] ixgb: Copyright (c) 1999-2008 Intel Corporation.
[ 34.467825] Brocade 10G Ethernet driver - version: 3.1.2.1
[ 34.482277] vxge: Copyright(c) 2002-2010 Exar Corp.
[ 34.482287] vxge: Driver version: 2.5.3.22640-k
[ 34.498156] usbcore: registered new interface driver aqc111
[ 34.514074] usbcore: registered new interface driver asix
[ 34.529623] usbcore: registered new interface driver cx82310_eth
[ 34.544062] et131x: module is from the staging directory, the quality is unknown, you have been warned.
[ 34.565545] i40evf: Intel(R) 40-10 Gigabit Virtual Function Network Driver - version 3.6.15
[ 34.565555] Copyright(c) 2013 - 2018 Intel Corporation.
[ 34.579217] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 34.592740] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 34.592832] usbcore: registered new interface driver pegasus
[ 34.606064] usbcore: registered new interface driver plusb
[ 34.620011] usbcore: registered new interface driver r8152
[ 34.633691] usbcore: registered new interface driver rtl8150
[ 34.810328] 2020-8-8 17:41:52 UTC
[ 34.810342] synobios: load, major number 201
[ 34.810355] Brand: Synology
[ 34.810361] Model: DS-3615xs
[ 34.810371] set group disks wakeup number to 4, spinup time deno 7
[ 34.810388] synobios cpu_arch proc entry initialized
[ 34.810396] synobios crypto_hw proc entry initialized
[ 34.810406] synobios syno_platform proc entry initialized
[ 34.810439] synobios open /dev/ttyS1 success
[ 37.630614] eth0: 0xffffc90013c52000, 08:9e:01:06:69:86, IRQ 44
[ 37.788583] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 39.804145] r8101: eth0: link up
[ 39.804247] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.630531] md: md2 stopped.
[ 40.632564] md: bind<sda5>
[ 40.659783] md/raid1:md2: active with 1 out of 1 mirrors
[ 40.678376] md2: detected capacity change from 0 to 1995451662336
[ 40.679179] md2: unknown partition table
[ 41.470759] bio: create slab <bio-2> at 2
[ 41.489113] init: dhcp-client (eth0) main process (8207) killed by TERM signal
[ 44.595510] EXT4-fs (dm-0): barriers disabled
[ 44.702450] EXT4-fs (dm-0): mounted filesystem with writeback data mode. Opts: usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,synoacl,data=writeback,oldalloc
[ 52.264736] usbcore: registered new interface driver usblp
[ 52.950908] usbcore: registered new interface driver usbhid
[ 52.950916] usbhid: USB HID core driver
[ 55.570656] iSCSI:target_core_rodsp_server.c:1027:rodsp_server_init RODSP server started, login_key(089e01066986).
[ 55.631069] iSCSI:extent_pool.c:766:ep_init syno_extent_pool successfully initialized
[ 55.783509] iSCSI:target_core_device.c:617:se_dev_align_max_sectors Rounding down aligned max_sectors from 4294967295 to 4294967288
[ 55.784092] iSCSI:target_core_lunbackup.c:361:init_io_buffer_head 512 buffers allocated, total 2097152 bytes successfully
[ 56.006009] iSCSI:target_core_file.c:146:fd_attach_hba RODSP plugin for fileio is enabled.
[ 56.006027] iSCSI:target_core_file.c:153:fd_attach_hba ODX Token Manager is enabled.
[ 56.006079] iSCSI:target_core_multi_file.c:91:fd_attach_hba RODSP plugin for multifile is enabled.
[ 56.006117] iSCSI:target_core_ep.c:786:ep_attach_hba RODSP plugin for epio is enabled.
[ 56.006124] iSCSI:target_core_ep.c:793:ep_attach_hba ODX Token Manager is enabled.
[ 59.633150] FAT-fs (synoboot2): fat_set_state: set=1 process=synopkicompatsy pid=12437
[ 59.639358] FAT-fs (synoboot2): fat_set_state: set=0 process=synopkicompatsy pid=12437
[ 63.423427] ata1.00: configured for UDMA/133
[ 63.423450] ata1: EH complete
[ 65.584405] warning: `nginx' uses 32-bit capabilities (legacy support in use)
[ 66.454057] loop: module loaded
[ 82.457661] init: synoscheduler-vmtouch main process (4893) killed by TERM signal
[ 82.874352] init: synoscheduler-vmtouch main process (14796) killed by TERM signal
[ 95.532971] init: synocontentextractd main process ended, respawning
[ 112.729617] perf interrupt took too long (2550 > 5000), lowering kernel.perf_event_max_sample_rate to 50000
[ 643.677509] perf interrupt took too long (5011 > 10000), lowering kernel.perf_event_max_sample_rate to 25000