[Upgrading Trantor 4.3 to Nanoboot 5.0]

will the data in the shares and on iscsi volumes also be kept during the upgrade ?

wich pat file did you use

 

Thx

 

Robert

[Replacing Network Card]

Hello,

 

i have 2 onboard nics wich are connected and a dual port NIC wich is not connected at the moment. Is it possible to just shutdown the dsm and replace the dual port through an quad Port NIC or do i have to reinstall xpenology?

 

thanks

[XPE 4.3.3810 B8 w. hba Disk Numbering]

it seems that a that the nukmber of a hard drive is wirtten on it.so that i have have to recognize all disk and than swap the disks in right order into the slots. I Have tested this with 3 ssds and it worked.

[XPE 4.3.3810 B8 w. hba Disk Numbering]

Hello,

 

i'm using the 4.3.3810 Beta 8 with hba Drivers and an LSI 9201-16i. it works fine, after i changed the synoboot.cfg so that i can see all devices. I'm worried about the numbering of the disks. It is not like the Ports of the LSI Controller. It seems that they are numbered in the order of inserting into the system.

 

Now i have 3 ssd on the last ports of the lsi controller but in the dsm they are Disk 3, 13,14. How can i change this.

 

 

thanks

 

Robert

[Dual CPU Server - Wrong CPU Core 4?]

the output ist still there in beta 8 - some ideas?

[4.3.3810 Beta 8 hba - 10GbE Fibre Channel max Nics?]

Hello,

 

is it possible to use a 10Gb FC Network Card like the Intel X520 with the current beta of xpenology ? what is the current maximum of usable network interfaces? in the configs there are lines for an eth7 but i read in an other thread that there max 4 nics because the DS3612 only has 4 interfaces.

 

i have an intel board with 2 onboard nics and an pcie card with 2 ports. i want to change the pcie card to an 4 ports (wich will be a second lacp bond) or an 10GB LC interface-

 

thanks for your answers

[XPEnology DS3612xs DSM 5.0-4418 (BETA)]

can i use the beta 6 hba synoboot with the dsm 5 pat or does the dsm5beta already have hba drivers included

[XPEnology DS3612xs DSM 5.0-4418 (BETA)]

can i use the beta 6 hba synoboot with the dsm 5 pat or does the dsm5beta already have hba drivers included

[sata controller LSI 9201-16i or 9260-16i (Raid)]

Hi,

 

is it better to use a normal sas/sata controller like the LSI 9201-16i for the Xpenology or the 9260-16i wich is an SAS/SATA Raid Controller with Cache Memory and an optional Backup Battery. Does anybody have one of this in use with a Xpenology installation

At the moment i us an older 3ware RAID Controller (PCI-64) with an synboot with hba drivers. Does the 9201 also need hba drivers or are they only needed for RAID Controllers.

 

at last i have a questions about LSI Controllers

 

- What is the IT Mode ? (i think its a kind of non raid mode for raid controllers)

 

 

thanks for your help

[sata controller LSI 9201-16i or 9260-16i (Raid)]

Hi,

 

is it better to use a normal sas/sata controller like the LSI 9201-16i for the Xpenology or the 9260-16i wich is an SAS/SATA Raid Controller with Cache Memory and an optional Backup Battery. Does anybody have one of this in use with a Xpenology installation

At the moment i us an older 3ware RAID Controller (PCI-64) with an synboot with hba drivers. Does the 9201 also need hba drivers or are they only needed for RAID Controllers.

 

at last i have a questions about LSI Controllers

 

- What is the IT Mode ? (i think its a kind of non raid mode for raid controllers)

 

 

thanks for your help

[disk write test with dd - no output]

hello,

 

when i tried to test the performance of my Xpenolog 4.3 with the following command

dd if=/dev/zero bs=1M count=2048 of=testfile. Instead of the copied bytes itz only shows the following

 

2048+0 records in

2048+0 records out

 

I'm looking for a line like this

 

17179869184 bytes (17 GB) copied, 433.088 seconds, 39.7 MB/s

 

but it doesn't show up in ssh session or console.

[disk write test with dd - no output]

hello,

 

when i tried to test the performance of my Xpenolog 4.3 with the following command

dd if=/dev/zero bs=1M count=2048 of=testfile. Instead of the copied bytes itz only shows the following

 

2048+0 records in

2048+0 records out

 

I'm looking for a line like this

 

17179869184 bytes (17 GB) copied, 433.088 seconds, 39.7 MB/s

 

but it doesn't show up in ssh session or console.

[Hang at boot after installation]

it ended up in the situation that i am only using the 3Ware Raid controller.

[Hang at boot after installation]

it ended up in the situation that i am only using the 3Ware Raid controller.

[Dual CPU Server - Wrong CPU Core 4?]

i must correct my last statement there are 2 quad core Xeons. they donst support hyper threading. the output of cat /proc/cpuinfo is attached to this post.

[Dual CPU Server - Wrong CPU Core 4?]

its an older intel board with two dual core xeon 5335

[Xpenology and SAS Controller - HBA]

Is it possible to change md0 or md1 wich are created during boot. I got 8 hdds on an 3ware 9550SXU and i can see only four disks. They are numbered from 9 -12. Im using the 4.3.3810 Beta 5 with hba drivers. on the controller the disks are set as single devices. i dont user the onboard intel sata controller because after installation my system hangs on checking the hdds on the sata ports.

[Dual CPU Server - Wrong CPU Core 4?]

i have installed the dsm 4.3 1.1 beta 5 on an intel board with 2 cpus. at the console i get an error "wrong cpu core: 4". How can i fix this?

[Hang at boot after installation]

if my bios is set to legacy i cant see all disks - if set to sata/ahci the controller only boots without drives. i will try to shuffle the disks and ports and wipe the drives one after another

[Hang at boot after installation]

i 've got the same problem after install 4.2 repack 1.2 on an Intel S5000VSA Mainboard. The onboard Controller hangs on enumerating the disks until i unplug them. Have you solved it ?