Jump to content
XPEnology Community

snoopy78

Member
  • Posts

    187
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by snoopy78

  1. vom Namen her würde ich ja sagen.... schaue es mir dann gleich mal an...
  2. kein Problem....das Umrechnen ist ganz wichtig, da man dieses Image NICHT!! aktualisieren (updaten) kann. es gibt im chin. forum schon eine neue version, welche dann upgradefähig ist....ist eigentlich simpel zu installieren, solange der usb boot port korrekt eingestellt ist...
  3. den Windows Taschenrechner....einfach auf Programmierer umstellen, HEX auswählen, HEX Wert (z.B. 1d) eintragen....und bei DEZ den Wert ablesen... umständlicher geht es hier https://www.rapidtables.com/convert/number/hex-to-decimal.html
  4. wenn du die Firmware heruntergeladen hast (bevor du neu startest) musst du per winscp auf das system gehen und mal in den Unterordnern schauen...da gibt es irgendwo mehrere solcher Dateien " model_Q0121_Q0160_17_10 " ....hier steht dann oben in den Dateien um welches Modell es sich handelt.... somit hat du dann den Modellname.. Das ist ein TVS-872X, bei dem findest Du diese Dateien auf jeden Fall.. MODEL_TYPE="Q0121_Q0160_17_10" PATCHED_FIRMWARE="TS-X72_20211221-5.0.0.1891" DOWNLOAD_URL="https://eu1.qnap.com/Storage/TS-X72/"
  5. Yes, you must so some Changes at baremetal....i think i made a quick summarization in one of my entries.... I'm currently running an ASRock D1542U Mobo with 2* m.2 mSATA + 5 (out of 8, since WebGUI won't display these, even they are detected in console ) LSI 9300 das hba HDD/SSD + 2* (out off 4) via QM2 4 Port m.2 nvme PCIe Card. So in total 2*500GB WD Red m.2 SATA SSD in Raid1 1(mirror) as Volume for all Apps, Docker, VM's and Importamt data (8 Docker + 4 VMs) 1*1TB Samsung 970Evo Plus as Volume 1*2TB Samsung 970Evo Plus as Volume 1* 4TB WD Red Pro HDD for IPTV recording aß Volume 1* 18TB Thosiba Enterprise HDD as Volume and for Testing currently 1* 4TB Seagate (Home User) HDD for QVR as recording Volume for CCTVs I've also modified my Initial Scripts as mentioned earlier to prevent a qnap Bug/behavior... Now i only wait for my Sundtek DVB-S2X to USB (2* sag) Box from Taiwan, then my Windows Server DVBViewer for Home IPTV can ein virtualized... Power consumption ist around 100W with Spikes to 150W unser load.. The downside ist, that the Boot time ist ~ 15-20minutes...but i don't Boot this device..
  6. You can Register there....i dir it too..you need qq and wechat for that.....for me the issue ist currently i need a baidou acc for downloading the File, since i can't Register @baidou...i'll try these days some more....but it Looks so gar interesting...was more Options to do...
  7. try QTS and no QTS Hero....you need a license for QTS Hero...;) as it's written in your error message... check the posts above, there are plenty of different units stated...
  8. thank you & yes, since we're here in a forum, it would be helpfull to have at least some basic information of how to proceed.....i currently also try to read the orignal post in here chinese forum but can't it's a bit hard to read sometimes..;) but a quick howto would also be nice for me too, since i'm not a programmer....
  9. why you don't post the loader then, so we all can try and see..;)
  10. soo...habe jetzt ein interessantes Verhalten gefunden.... habe einen 8 Port HBA...und in meiner Model.conf auch die Zuordnung richtig drin.... wenn ich SSD/HDD einstecke, erkennt er jedoch nicht an allen Ports etwas in der WEBGUI....auf der CLI im Kernellog und per fdisk -l jedoch schon.... naja...ich kann noch 3 normale SSD/HDD einstecken + 2 NVMe....sollte also reichen..;) Wenn jemand einen EASY MOUSE card reader verwenden will..!! ACHTUNG !! im Normalzustand rebooted die Qnap, sobald der eingesteckt wird. (einfach mal danach bei goggle suchen, ist nen bekanntes verhalten..) => ich habe das bei mir so gelöst, dass ich bei der ERSTELLUNG des Boot-Images (also da, wo ich auch die model.conf erstelle/bearbeite) in der "create_udev_rule.sh" (glaube unter /etc/init.d/ ) den YEC Eintrag gelöscht habe. Dann kann ich die EasyMouse in Betrieb ohne Probleme einstecken, nur beim Booten sollte die nicht drin sein, da es sonst wieder als USV (status abnormal) erkannt wird und das System herunterfährt.
  11. @VauRa der HBA sollte eigentlich immer im TINYCORE erkannt werden, solange er mpt3sas verwendet. Naja..JBOD klingt doch schon Mal richtig....hier ist es Just a Bunch Of Disks..also genau das, was du suchst... Ich habe gestern Nacht aber noch ein anderes Verhalten mit den SAS HBA gesehen, was ich später/die Tage verifizieren will.... So wie es aktuell aussieht erkennt das System physisch SSDs an weitern Ports, aber keine HDDs....auf werden erkannte SSD/HDD nicht zwingend in der WebGUI angezeigt...
  12. at First create the Boot Stick with the Image Herr in this Forum, then start from it, Switch into tinycore Linux, Check the commands to read out the correct values and then modify the model.conf you created by the script...... The most hard part is to correct read and modify the values...
  13. wie ich schon schrieb, war mein HBA zuerst im IR Mode (Raid) geflasht....habe Ihn dann in den IT Mode (stink normaler HBA) geflasht ...somit sind die Platten ganz normal einzeln ansprechbar..die backplane sollte hier eigentlich egal sein...ich habe auch Systeme mit Backplane...und jetzt habe ich auch eine mini-Backplane drin Ich weiss, dass bei gebrauchten HBAs (HP, Dell,...wie sie alle heißen, aber im original LSI sind) gerne die IR Firmware drauf ist....bei Tante Google findet man viel dazu das habe ich hierzu genutzt.. https://forums.servethehome.com/index.php?threads/supermicro-onboard-lsi3008-from-ir-to-it-mode.19083/ habe das Gehäuse hier.. https://www.amazon.de/gp/product/B07TVTYCTV/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&th=1 das hat sogar Anschlüsse für nen 2. Controller je SAS Backplane..^^ ..habe extra mal für dich ne SSD schnell an den HBA angeklemmt... das steht dazu im DMESG " [ 2870.010878] ==== end ==== [ 3226.447484] mpt3sas_cm0: detecting: handle(0x0009), sas_address(0x44332211020 00000), phy(2) [ 3226.455927] mpt3sas_cm0: REPORT_LUNS: handle(0x0009), retries(0) [ 3226.697096] mpt3sas_cm0: TEST_UNIT_READY: handle(0x0009), lun(0) [ 3227.737680] mpt3sas_cm0: detecting: handle(0x0009), sas_address(0x44332211020 00000), phy(2) [ 3227.746126] mpt3sas_cm0: REPORT_LUNS: handle(0x0009), retries(0) [ 3227.752295] mpt3sas_cm0: TEST_UNIT_READY: handle(0x0009), lun(0) [ 3227.849042] Check proc_name[mpt3sas]. [ 3227.852791] scsi 8:0:0:0: Direct-Access ATA Crucial_CT750MX3 R011 PQ : 0 ANSI: 6 [ 3227.861251] scsi 8:0:0:0: SATA: handle(0x0009), sas_addr(0x4433221102000000), phy(2), device_name(0x500a0751125fb747) [ 3227.871945] scsi 8:0:0:0: enclosure logical id(0x5d0509900005f2c8), slot(0) [ 3227.879061] scsi 8:0:0:0: enclosure level(0x0000), connector name( ) [ 3227.885886] scsi 8:0:0:0: atapi(n), ncq(y), asyn_notify(n), smart(y), fua(y), sw_preserve(y) [ 3227.894667] scsi 8:0:0:0: serial_number( 1615125FB747) [ 3227.900484] scsi 8:0:0:0: qdepth(32), tagged(1), scsi_level(7), cmd_que(1) [ 3227.908992] scsi 8:0:0:0: Serial Number: 1615125FB747 [ 3227.914899] Check proc_name[mpt3sas]. [ 3227.914908] Check proc_name[mpt3sas]. [ 3227.918636] Check proc_name[mpt3sas]. [ 3227.922413] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 3227.926087] Check proc_name[mpt3sas]. [ 3227.931526] end_device-8:0: mpt3sas_transport_port_add: added: handle(0x0009 ), sas_addr(0x4433221102000000) [ 3227.937107] sd 8:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB) [ 3227.976661] sd 8:0:0:0: [sdc] Write Protect is off [ 3227.981520] sd 8:0:0:0: [sdc] Mode Sense: 9b 00 10 08 [ 3227.982035] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, supp orts DPO and FUA [ 3228.001012] sdc: sdc1 [ 3228.007980] sd 8:0:0:0: [sdc] Attached SCSI disk [ 3228.012668] Check proc_name[mpt3sas]. [ 3228.016397] Check proc_name[mpt3sas]. [ 3237.294305] ---- NAS_Disk_Hot_Add(enc_id=0, port_id=6) start. [ 3237.513059] ---- NAS_Disk_Hot_Add(enc_id=0, port_id=6) finished. [~] # "
  14. ok..ich kann bestätigen...mit den QNAP QM2 Karten funktionieren NVMe auch als Volume..^^ (hatte das Glück und den als WHD bei Amazon für unter 150€ bekommen) habe erst mal eine 1TB 970 Evo Plus als ein Volume eingebunden, die 2 TB Evo Plus kommt morgen.. Ich hab schlussendlich die Karte im unteren PCIe3x8 Slot verbaut uns so den PCIe3x16 für GraKa frei (die könnte ich ggfls. in VMs durchreichen)... DD Cine V6 SAT Karten ließen sich leider nicht durchreichen, so dass ich hier auf SAT>USB Boxen von Sundtek ausgewichen bin, da USB problemlos durchreichbar ist. ! Ich hatt als Basisvolume 2x Intenso 256GB m.2 SATA SSDs im RAID 1 genommen (da hier alle Docker Container, APPs und VMs liegen, leider ist die eine heute ausgestiegen. Werde die jetzt gegen WD RED m.2 SATA SSDs austauschen, bekommt Amazon halt den Intenso Schrott zurück... ! Ansonsten kann ich ganz zufrieden sein, der SAS HBA funktioniert ( 18TB HDD wurde erkannt, wird aber erst später, wenn ich fertig bin, eingeschoben) , die m.2 SATA Anschlüssen onBoard funktionieren, PCIe Slots funktionieren beide, USB funktioniert, RAM wird korrekt erkannt und angezeigt, CPU wird korrekt erkannt und angezeigt...einzig die Startzeit von ca. 15Minuten ist etwas lang, aber dieses System soll permanent laufen... Noch einmal Danke @ALL
  15. Ja....habe mir gestern Nacht bei Amazon ne QNAP QM2-4P-384 relativ günstig geschossen....werde es dann am Di/Mi testen...
  16. Update ...... nach weiteren Tests wird die NVMe PCIe aktuell nur als Cache erkannt.....ich schau Mal, dass ich ne QM2 Karte bekommen...dann geht es weiter... Leider habe ich es nicht geschafft die DD Cine V6 im Qnap als PCIe Gerät (lspci unter qnap ist ja grausig) zu sehen....kann Sie daher auch nicht an die VM (Win Server 2021) durchreichen...suche jetzt DVB-S2(x) Dual USB Tuner, die sollte ich ja durchreichen können...
  17. gleiches spielchen auch mit meiner PCIe NVMe SSD (welche in einem billigen China Adapter sitzt). hier die Erweiterung mit den PCIe...die NVMe wird als Drive erkannt und kann für Volumes verwendet werden. model.confmodel.conf tc@box:~$ lspci -vtnn -+-[0000:ff]-+-0b.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 [8086:6f81] | +-1e.4 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f9c] | +-1f.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f88] | \-1f.2 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Power Control Unit [8086:6f8a] \-[0000:00]-+-00.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 [8086:6f00] +-01.0-[01]----00.0 Digital Devices GmbH Octopus DVB Adapter [dd01:0003] +-02.0-[02]--+-00.0 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 0 [8086:6f50] | +-00.1 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 1 [8086:6f51] | +-00.2 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 2 [8086:6f52] | \-00.3 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 3 [8086:6f53] +-03.0-[03]----00.0 Samsung Electronics Co Ltd Device [144d:a808] +-03.2-[04]----00.0 LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] +-05.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management [8086:6f28] was ich noch nicht geschafft habe, ist die DD Karte für meine VM sichtbar zu machen.....ich werde dann mal die PCIe Steckplätze tauschen..und weiterschauen... ach ja....Bootup Time des Systems ca. 15 Min, bis WebGUI accessible...
  18. translated_lajifuli_scriptssooo.....ich habe jetzt mal weiter getestet... als Mainboard habe ich ein AsrockRack D1541D4U-2T8R (gebraucht als Komplettsystem hier geholt https://www.ebay.de/itm/294695904328) Auf dem Mainboard sind 2x m.2 NVME/SATA Ports via Marvell Chip drauf ( musste hier im Bios auf Legacy umstellen, so dass meine beiden SATA SSDs erkannt werden) Zudem ist ein LSI3008 mit 2x miniSAS HD auf dem Board verbaut. (!! ist im IR Modus!!), diesen habe ich entsprechend auf IT Modus (reiner HBA) umgeflashed. Weiterhin sind noch 6x SATA Ports via dem Intel Chipsatz drauf. Mittels LSPCI wird mir folgendes angezeigt.. 00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5) 00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation C224 Series Chipset Family Server Standard SKU LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 8 Series Chipset Family Thermal Management Controller (rev 05) 02:00.0 System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 0 02:00.1 System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 1 02:00.2 System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 2 02:00.3 System peripheral: Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 3 04:00.0 Serial Attached SCSI controller: LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 (rev 02) 05:00.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge (rev 03) 06:00.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 30) 07:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 12) 08:00.0 Ethernet controller: Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 (rev 01) 08:00.1 Ethernet controller: Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 (rev 01) ff:0b.0 System peripheral: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 03) ff:0b.1 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 03) ff:0b.2 Performance counters: Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D R3 QPI Link 0/1 (rev 03) Wenn ich diese Werte entsprechend umschreibe, geht erst einmal KEIN! LSI SAS und MARVEL m2.SATA. habe mir dann mittels lspci -vnnt \-[0000:00]-+-00.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D DMI2 [8086:6f00] +-01.0-[01]-- +-02.0-[02]--+-00.0 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 0 [8086:6f50] | +-00.1 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 1 [8086:6f51] | +-00.2 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 2 [8086:6f52] | \-00.3 Intel Corporation Xeon Processor D Family QuickData Technology Register DMA Channel 3 [8086:6f53] +-03.0-[03]-- +-03.2-[04]----00.0 LSI Logic / Symbios Logic SAS3008 PCI-Express Fusion-MPT SAS-3 [1000:0097] +-05.0 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D Map/VTd_Misc/System Management [8086:6f28] +-05.1 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO Hot Plug [8086:6f29] +-05.2 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D IIO RAS/Control Status/Global Errors [8086:6f2a] +-05.4 Intel Corporation Xeon E7 v4/Xeon E5 v4/Xeon E3 v4/Xeon D I/O APIC [8086:6f2c] +-14.0 Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] +-16.0 Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] +-16.1 Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #2 [8086:8c3b] +-1c.0-[05-06]----00.0-[06]----00.0 ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] +-1c.3-[07]----00.0 Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller [1b4b:9172] +-1c.4-[08]--+-00.0 Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 [8086:1528] | \-00.1 Intel Corporation Ethernet Controller 10-Gigabit X540-AT2 [8086:1528] +-1d.0 Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] +-1f.0 Intel Corporation C224 Series Chipset Family Server Standard SKU LPC Controller [8086:8c54] +-1f.2 Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] +-1f.3 Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] \-1f.6 Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] ein paar genauerw Werte aus dem System gezogen, diese umgerechnet und in die Model.conf eingetragen. model.conf Zudem habe ich die Model.conf und die model_Q0121_Q0160_17_10.conf gleich angepasst.. ich hatte mir dann, nachdem es nicht funktioniert hatte, im TinyCore meine Bootdisk gemounted (!! welche Disk bei euch verwendet wird, findet Ihr mittels fdisk -l raus und müsst die Befehle entsprechend anpassen) mount /dev/sdc2 & mit sudo mkdir /home/tc/initrd; cd initrd; gunzip -c /mnt/sdc2/boot/initrd.boot | cpio -id ausgepackt. Dann im initrd/etc/model.conf angepasst, und neu via sudo ./translated_lajifuli_scripts/re_repacking (das re_pack script liegt in einem unterordner vom home/tc..) gepackt und neu gestartet.... danke@all in diesem Forum (alle Infos, die ich genutzt hatte waren in diesem Thread verstreut ) !! beachtet bitte unbedingt eure model.conf aufzuheben, da nach JEDEM Update der QNAP der Vorgang wiederholt werden muss, da diese Werte überschrieben werden!! (ich habe daher winscp zum bearbeiten und kopieren, neben der cli, genutzt) werde die Tage dann mal weiter testen..;) btw.... ich habe auch mal die RAM & CPU Anzeige aus einer TVS-1685 genommen und hier eingetragen... model_mod_ram.conf
  19. Danke, ich werde das diese Tage mal testen....ich könnte ja mal spasseshalber prüfen, ob meine ASUS NVME Adapterkarter (welche bei meinem Z690 Formula dabei war) funktioniert....naja...habe mir mal noch 2 m.2 sata SSDs geholt (256GB)....werde diese dann ggfls. als Raid 1 laufen lassen.... kann alles vrmtl. aber erst am WE testen.... sooo....hab mich noch mal schnell rangesetzt und die 3 Stellen angepasst.... Das ist jetzt das Ergebnis....ich hab die SSD einmal als PCIE und als m.2 drin.... Ich habe auch spasseshalber mal meine ASUS PCIe NVME Karte verwendet....werde die Tage mal wieder meinen billigen China-Adapter und die Werte testen....aber so sieht es schon mal gut aus.....
  20. irgendwie ist bei mir heute der Wurm drin.... als Board nutze ich ein D1541D4U-2T8R als Systemplatte will ich eigentlich eine Samsung 970 Pro SSD nutzen, da hier auch VMs & Docker laufen sollen.... irgendwie bin ich jedoch zu "blöd" die Werte richtig zu ermitteln/einzutragen. ich habe die NVME einmal ohne adapter auf das Board gesteckt und dann mit....irgendwie klappt es bei mir trotzdem nicht so wie es sollte... nach den genannten Berechnungen sollte es eigentlich gehen...oder mache ich ggfls. woanders etwas falsch? Ich ssh/winscp in die box und bearbeite da die Datei...nachdem ich das script habe laufen lassen... danach führe ich die CP & rebuild befehle aus und boote neu.... eigentlich wollte ich auch das TS-1685 nutzen, da es relativ baugleich zu meiner HW ist, aber hier klappt das genauso wenig....:S mit adapter.txt model.conf ohne adapter.txt
  21. musste nichts einstellen, war sofort richtig da..^^
  22. habe es heute testweise als TVS-472X mit Q0120_Q0180_10_10 auf einem alten XEON X3430 mit 8GB RAM installiert. Meinen LSI SAS HBA hatte er erkannt, meine Mellanox Connect X2 nicht...muss hier mal schauen, ob ich eine Intel oder andere 10G NIC zum laufen bekomme. Ich überlege nun mir einen intel atom soc (supermicro) zu holen und mein TS-251B in Rente zu senden....wichtig sind für mich die Docker container...die teste ich morgen....erst mal Daten vom richtigen NAS herschaufeln... interessant sind die 0 von 8 GB RAM...
  23. Loader: Jun's Loader v1.04b for DSM 6.2 + Extra LZMA 0.13.3 DSM: DSM DSM 6.2.3-25426 - DS918+ Bare Metal Chassis: Silverstone RM212 2HE Motherboard: Supermicro X10SDV-2C-TP4F SoC RAM: 2x 8GB Kingston HyperX Fury DDR4 HX424C15FB2/8 RAM 8GB Integrated NIC: 2x Gb LAN (Intel I210) Integrated NIC: 2x 10Gb LAN (Intel X552, SoC) HBA: LSI IT Mode flashed DELL PERC H310 HDDs SAS: 3x 10TB Seagate Exos X10 SDD SATA: 1x 120GB Sandisk Ultra (SATA) SDD SATA: 1x 750GB Cruicial MX300 (SATA) working, just had real trouble to activate the 10G ixgbe interfaces ("dmesg | grep ixgbe" gives you the info about the eth) => my workaround was to manually enable eth3 ==> ifconfig eth3 up => then by WebGUI set to DHCP and make default gateway ==> in CLI find the settings " /etc/sysconfig/network-scripts/ifcfg-eth3 " and copy the file to /usr/local/etc/rc.d/ => since i'm using the S99mount.sh script, i siply added following lines after start cp /usr/local/etc/rc.d/ifcfg-eth3 /etc/sysconfig/network-scripts/ifcfg-eth3 /etc/rc.network restart working fine now
  24. for my desk 10GBit switches i use CRS305-1G-4S+ ... it's cheap (~130€) and has 4x 10G SFP+ Ports and can be powered either by PSE or by PoE (copper 1Gbit LAN)
  25. Loader: Jun's Loader v1.04b for DSM 6.2 DSM: DSM DSM 6.2.2-24922 - DS918+ Bare Metal Chassis: Silverstone RM212 2HE Motherboard: Supermicro X10SDV-2C-TP4F SoC RAM: 2x 8GB Kingston HyperX Fury DDR4 HX424C15FB2/8 RAM 8GB Integrated NIC: 2x Gb LAN (Intel I210) Integrated NIC: 2x 10Gb LAN (Intel X552, SoC) HBA: LSI IT Mode flashed DELL PERC H310 HDDs SAS: 3x 10TB Seagate Exos X10 SDD SATA: 1x 120GB Sandisk Ultra (SATA) SDD SATA: 1x 750GB Cruicial MX300 (SATA) working, just had some trouble to activate the 10G ixgbe interfaces
×
×
  • Create New...