d0n
-
Posts
18 -
Joined
-
Last visited
Posts posted by d0n
-
-
The newer bios, does not have the acpi settings, you do not need to care about.I cannot find the ACPI verison in BIOS selection. What is the BIOS version are you using? Is it modded?
Thanks!
Gesendet von meinem HTC U11 mit Tapatalk
-
I don't know where u r from. But this the one which I use :Thanks, Ill go hunt a card with that chipset down..
cakes..
https://www.ebay.de/ulk/itm/323456240082
Gesendet von meinem HTC U11 mit Tapatalk
-
-
I just edited grub on the usb stick maching my Mac address and wol works fine
Gesendet von meinem HTC U11 mit Tapatalk -
Power button works with the app from this forum
https://xpenology.com/forum/topic/7195-power-button-package/?do=findComment&comment=97760
Wol also works, disable then enable in dsm
Gesendet von meinem HTC U11 mit Tapatalk
-
7 hours ago, IG-88 said:
just the parallel thread for loader 1.03 (dsm. 6.2)
This is for the 918+ not for the 3615/3617
-
-
13 hours ago, Hannes2k said:
But pls notice: You will be able to install DSM 6.2.1 with your new Intel NC. But your N54L won´t shutdown or restart anymore. Instead u have to use the hardware button.
I use the dsm 6.2.1 on my n54l and got no problems with restarting or shutdowns, maybe we could compare bios settings.
-
On 12/30/2018 at 3:15 PM, bearcat said:
@sebelec The only reason to cut it, is to install the X4 card in an PCIe-X1 slot (with a "closed" slot), if you look at this pic of the main, you can see the X16 slot at the bottom,
with the standard X1 slot just over it, just to the left of the X1, is a non-standard positioned X4 slot, for a RemoteAccessCard (RAC).
@bearcat Could I use the X4 in addition to the X1 and X16, for a third card?
Thanks for the hints here
-
I got me an Card with uPD720200 instead of uPD720202 and USB 3 works again
I will have a look whats about n54l powering off here
-
I got me an Card with uPD720200 instead of uPD720202 and USB 3 works again
-
It happens to me too and as sat4064 I am not on 6.2.1 but 6.2 23739
I use a nec uPD720202 usb 3.0 by delock, in another thread https://xpenology.com/forum/topic/13022-n40l-usb3-pci-e-card-not-functioning-in-dsm-62/somebody said it works on dsm 6.2 but not for me.
Lspci:
0000:03:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller (rev 02)
But no driver loaded
N54l
-
On 11/1/2018 at 12:16 PM, Josh said:
I can not help with your card but i have this card working under DSM 6.2/1.03b (3615) on my N54L:
https://www.delock.de/produkte/1112_USB-3-0/89243/merkmale.html?setLanguage=en
Regards
Are you sure it is the 89243 card?
-
Lspci output :
0000:03:00.0 Class 0c03: Device 1912:0015 (rev 02) (prog-if 30)
Flags: fast devsel, IRQ 16
Memory at fe9fe000 (64-bit, non-prefetchable)
Capabilities: [50] Power Management version 3
Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
Capabilities: [90] MSI-X: Enable- Count=8 Masked-
Capabilities: [a0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [150] Latency Tolerance Reporting -
I got the Delock too, but it does not work with DSM 6.2 1.03b (3615) N54L
0000:03:00.0 Class 0c03: Device 1912:0015 (rev 02)
-
syslinux.cfg:
... LABEL Synology DSM 5.0-4528 ... LABEL Synology DSM 5.0-4493 --- LABEL Synology DSM 5.0-4482 --- LABEL Synology DSM 5.0-4458 --- LABEL Synology DSM 5.0-4418 ----
-
Anybody has a changelog for the new nanoboot 5.0.4.1?
N54L - upgrade from DSM 6.1.7 to 6.2.1?
in AMD
Posted
https://xpenology.com/forum/topic/13365-n54l-upgrade-from-dsm-617-to-621/?do=findComment&comment=103244
Gesendet von meinem HTC U11 mit Tapatalk