Jump to content
XPEnology Community

GizmoPower

Member
  • Posts

    43
  • Joined

  • Last visited

Everything posted by GizmoPower

  1. Is it possible to edit/change snr and mac in user_config.json after install ?
  2. You are an Angel. You saved me 😀 Thank so much!!
  3. Hey guys. I wiped my phone because I had to send it in to fix broken screen. Now I am using a temporarly Samsung Of course now I cant get in to my server because it requires 2 factor authentication. Yeah i forgot... There is an option in log in section of synology: -Lost phone- But I dont recieve E-mail with the code....? I have now I have configured my mail in synology, and it worked fine before. Anyone has an solution?
  4. I managed to install 6.5 and run Xpenology. The problem now is when i want to start the innstalation of .pat I get: No hdd found 😕 I think the controller may not be supported. If am not wrong I think it is Smart Array E200 controller.... Im running on this one: hp proliant ml350 g5 server xeon quad-core e5420 2.50ghz
  5. Thanks a lot for taking time to respond. I tried to install ESXI 6.7 but cpu xeon 5420 not supported 😳 But I understand much more now on how to proceed. Will try again. Appreciate it, thanks. 😊
  6. Hello. Ive been a member for many years and have success in running baremetal Cuurently running Baremetal Intel S5500HCV DSM 6.2.2-24922 Update 4 Now i am trying to setup an: hp proliant ml350 g5 server xeon quad-core e5420 2.50ghz Of what I understand this cant be run as Baremetall. So I found this tutorial: All make sence untill here: It assumes the user has knowledge of ESXI i suppose... I know loader has a ESXI option on boot. I know that its about VMWare But, I dont understand how to use ESXI. (VMWare) Do I make a bootable usb, as in baremetall. and boot the server? Do I install ESXI on the server first or local on my PC? Where do I find the correct versions? Hope someone can clarify for me.
  7. In the tutorial i feel there is missing something between here: I have NO experience with ESXI. I have followed the tut untill here, but now confused. I have done this several times with my other server that runs 6.2.2, just not with ESXI What to do. Where do I install ESXI and run it? How do I include the 2 files? Wich folder. Sorry to be a complete noob
  8. A little bit off but you think this solution will work with HP PROLIANT ML350 G5 ? I installed junes loader 1.03b and ds3615 6.2.2-24922 I installed second Nettwork card Intell based wich I edited in grub.cfg as MAC2:XXXXXXXXXXXX The onboard set as MAC1:XXXXXXXXXXXXX Starts up and appears quickly in find.synology.com, but it cant find HDD . I have HDD in 4bays I have tried in the 1 sata port as well, no luck
  9. GizmoPower

    DSM 6.2 Loader

    - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.6-15266 - Loader version and model: Jun's Loader v1.03b - DS3617xs - Using custom extra.lzma: NO - Installation type: Baremetal Intel S5500HCV - Additional comments: Changed storage controller to AHCI in bios I first had the -No hard disk found- Then changed storage controller in bios to AHCI
  10. GizmoPower

    DSM 6.2 Loader

    Thank you, but I dont know how to compile drivers.. :/ I am on 6.1.6-15266 with 1.02b Should I just wait?
  11. GizmoPower

    DSM 6.2 Loader

    No solution yet?
  12. GizmoPower

    DSM 6.2 Loader

    Question 1: You probably have to do it all over again. To see your USB drive you need to do a clean and format. This is done by using diskpart in cmd. Open cmd (Command line) Type -diskpart- then -list disk- then select the USB disk. Example. -select disk 1- Then -clean- Then -create partition primary- Now you can see the USB drive and format as usual in windows by right clicking and selectin -Format-
  13. GizmoPower

    DSM 6.2 Loader

    I get: No hard disk found. What to do? - Loader version and model: Jun's Loader v1.03b - DS3615xs - Installation type: Baremetal Intel S5500HCV
  14. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.5 15254 Update 1 - Loader version and model: Jun's Loader v1.02b - DS3617xs - Using custom extra.lzma: - Installation type: Baremetal Intel S5500HCV - Additional comments: Requires reboot
  15. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.1.4 15217 - Update 4 - Loader version and model: Jun's Loader v1.02b - DS3617xs - Installation type: Baremetal Intel S5500HCV - Additional comments: Requires reboot
  16. S5500HCV Baremetall 2 X quad Intel Xeon 2.16Ghz, 12Gb Ram DS3617xs with 1.02b loader DSM 6.1.4-15217 Update 2 No reboot! Everything seems ok!
  17. S5500HCV Baremetall 2 X quad Intel Xeon 2.16Ghz, 12Gb Ram DS3617xs with 1.02b loader DSM 6.1.4-15217 Update 1 All working!
  18. Hello. I did migrate back to 3615, but back again to 3617. I cant see any significance increase in performance. So I think I will stay on 3617 because of my processors: -Xeon-
  19. S5500HCV Baremetall 2 X quad Intel Xeon 2.16Ghz, 12Gb Ram Tested on DS3617xs and DS3615xs with 1.02b loader DSM 6.1.4-15217 All working
  20. S5500HCV Baremetall 2 X Intel Xeon 2.16Ghz, 12Gb Ram DS3617xs 1.02b loader 6.1.3-15152 Update 8 Ok!!!
  21. I have a question regarding models. Running baremetal: DS3617XS 1.0.2b and 6.1.3 15152 Update1 Before I had ds3615xs installed. I migrated to ds3617xs becouse of my 2X Xeon prosessors. (2 X 2.16 quad) The thing i found out is that synocomunity and others dont support ds3617xs with their packages. I run Docker for some of these packages, but should I, or not, migrate back to ds3615xs with my prosessors in mind? Another thing that occured is that my 12Gb ram, was reduced to 8Gb ram after migrating to ds3617xs. That might be hardware fault, not sure. Thank you.
  22. Now all working. No clue why. Might have been something with my network....
  23. Well mine was set to that by default. Still dont know why I dont get connection. In windows Network it discovers "Synology" but cant access.... ???? Error reports that Synology dosent answer
  24. Anyone having trouble accessing files via windows. Samba?
  25. Updated from I installed 6.1.3 and downloaded 15152.pat from synology. 15152 update 1 I just installed from within DSM as it is latest update
×
×
  • Create New...