Xeno

Members
  • Content Count

    48
  • Joined

  • Last visited

Everything posted by Xeno

  1. The latest script doesn't work with DSM version 6.2.2-24922, however it seems to work fine under mobile.
  2. Xeno

    DSM 6.2 Loader

    DS3617xs with 1.03b did not work for me. The latest DSM. just hangs right after the install. I switch back to DS3615xs and the system upgraded flawlessly. Been running my rig for about 19 + hours, so far so good. No issues with Mellanox or LSI card.
  3. Fantastic tool, awesomely cool. Thank you so much.
  4. Xeno

    DSM 6.2 Loader

    I have successfully downgraded from DSM 6.2.1-23824 back to DSM 6.2-23739 Update 2. Everything is working properly and no more volume crash.. Big thanks to Jun, 1.03b worked perfectly! Also a big thanks to FOXBI for creating this awesome little tool
  5. Xeno

    DSM 6.2 Loader

    I would suggest to setup a test setup, run different loaders and see what works best on your hardware.
  6. Xeno

    DSM 6.2 Loader

    Verified again this morning all drives attached to sas keep crashing. So if you have mellanox nic and SAS9211-8i I would recommend not to use 1.04b at this time.
  7. Doesn't work for me every time I install manually it tells me I need to installation file 6.2.1 23824. Can someone help? DS3617xs 1.02b loader
  8. Xeno

    DSM 6.2 Loader

    Checked the server today and all the drives that are connected to LSI 9211-8I crashed or failed. The reaming derives that are connected to on board sata are all ok. Drives hocked up to LSI crashes after a period of time usually withing 24 to 48 hours.
  9. Xeno

    DSM 6.2 Loader

    I Yeah, I'm going to downgrade since I can't get my mellanox to work.
  10. Xeno

    DSM 6.2 Loader

    Thanks, yeah I'm on 1.04b 918+ and couldn't get the hw transcoding and my mellanox 10GbE nic to work.
  11. Xeno

    DSM 6.2 Loader

    Hey baratta930 Can you post your grub.cfg screenshot? Thanks
  12. Hi I was just wondering is there any way to fix the drive numbering when using SAS9211-8I? What I mean is that the HD number in the GUI do not correspond to the bay number. I'm on DS918+ loader DSM 6.2.1-23824 Update 1 My system specs are in my sig.
  13. Xeno

    DSM 6.2 Loader

    I was wondering if anyone using MELLANOX MNPA19-XTR with 1.04b successfully? If so, could you please help? Thank you.
  14. Wow, this is just way to cool. THANK YOU! IT WORKS...
  15. Xeno

    DSM 6.2 Loader

    Baremetall install Updated fine however MELLANOX MNPA19-XTR no longer detected. LSI 9211-8i flashed to IT mode works without any issues. Specs Supermicro MBD-X10SLH-F-O Intel BX80646E31276V3 LSI 9211-8i MELLANOX MNPA19-XTR
  16. Xeno

    DSM 6.2 Loader

    First of all, I'd like to thank Jun for your awesome hard work and yes I would like to know that as well. Again thank you all for your hard work.
  17. Baremetal DS3617xs updated without issues. Will do some more testing for stability and or bugs....
  18. Xeno

    DSM 6.1.x Loader

    v1.02b Works great, thanks!
  19. Xeno

    DSM 6.1.x Loader

    Sorry I couldn't help, perhaps you should post your system specs including the what type of NIC you are using. It's possible that someone with similar setup might be able to help you.
  20. Xeno

    DSM 6.1.x Loader

    Did you change mac adders to your native mac in the grub.cfg?
  21. Xeno

    DSM 6.1.x Loader

    Wow New loader, thank you SIR. I will give it a go.
  22. Xeno

    DSM 6.1.x Loader

    Confirmed, upgrading VIA GUI from 6.1.1-15101 Update 4 to 6.1.2-15132 worked without issues. My sys spec: Install: Bare Metal Loader: DS3617xs v1.02a2. Motherboard: Supermicro X10SLH-F BIOS Revision: R 3.0a RAM:32Gb ECC ram CPU: XEON E3-1276 v3 HBA: SAS 9211-8i flashed to it mode firmware P20 Volume SHR2 Uptime: 13 hours. So far so good however the system was running for only 13+ hours. Will report if anything not working correctly.
  23. Xeno

    DSM 6.1.x Loader

    I have successfully upgraded from 6.1-15047 Update 2 to 6.1.1-15101 Update 1 using DS3615xs 6.1 Jun's Mod V1.02-alpha. First, I tried to do a strait upgrade via GUI, it failed. I then rebooted manually and used force install. I was greeted with DSM migration screen, I clicked on Synology's Download Center to download and install the newest version of DSM. https://www.synology.com/_images/tutori ... ard_91.png the system performed upgrade and rebooted fine. After reboot I performed another update from 6.1.1-15101 to 6.1.1-15101 Update 1 via GUI. System is working fine so far.
  24. Xeno

    DSM 6.1.x Loader

    Ok small update, loged in into my box this morning the system worked fine the uptime was around 13.5 hours. Then the GUI stopped responding and it failed . Interesting to note only the GUI side wans't accessible, but I still had full access to my shares. I removed the usb stick and re flashed with DS3615xs alpha and rebooted. After reboot I was greeted with welcome back massage and asked if I wish to migrate from DS3617xs to DS3615xs. I performed the migration and system rebooted without issues. Running DSM 6.1-15047 Update 2 and it works good so far. I will test it for few days to see if there are any issues. Granted that we are dealing with an alpha build issues to be expected. Bare metal SHR enabled BTW.