filippo333

Log for those interested: [spoiler=Logs]2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: RSDP 0x00000000000F05B0 00024 (v02 ALASKA) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: XSDT 0x00000000B3DFE0A0 000BC (v01 ALASKA A M I 01072009 AMI 00010013) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: FACP 0x00000000B3E26DB0 00114 (v06 ALASKA A M I 01072009 AMI 00010013) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI BIOS Bug: Warning: FADT (revision 6) is longer than ACPI 5.0 version, truncating length 276 to 268 (20130328/tbfadt-311) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130328/tbfadt-202) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: DSDT 0x00000000B3DFE1F8 28BB2 (v02 ALASKA A M I 01072009 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: FACS 0x00000000C2D29C40 00040 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: APIC 0x00000000B3E26EC8 00084 (v03 ALASKA A M I 01072009 AMI 00010013) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: FPDT 0x00000000B3E26F50 00044 (v01 ALASKA A M I 01072009 AMI 00010013) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: DBG2 0x00000000B3E32650 00054 (v00 INTEL 00000002 MSFT 0000005F) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: MCFG 0x00000000B3E26FF0 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E27030 00390 (v01 SataRe SataTabl 00001000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: FIDT 0x00000000B3E273C0 0009C (v01 ALASKA A M I 01072009 AMI 00010013) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E27460 03041 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E2A4A8 02544 (v02 PegSsd PegSsdt 00001000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: HPET 0x00000000B3E2C9F0 00038 (v01 INTEL SKL 00000001 MSFT 0000005F) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E2CA28 00E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E2D868 00B19 (v02 INTEL xh_rvp08 00000000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: UEFI 0x00000000B3E2E388 00042 (v01 INTEL EDK2 00000002 01000013) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E2E3D0 00EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: LPIT 0x00000000B3E2F2B0 00094 (v01 INTEL SKL 00000000 MSFT 0000005F) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: WSMT 0x00000000B3E2F348 00028 (v01 INTEL SKL 00000000 MSFT 0000005F) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E2F370 0029F (v02 INTEL sensrhub 00000000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: SSDT 0x00000000B3E2F610 03002 (v02 INTEL PtidDevc 00001000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] ACPI: DBGP 0x00000000B3E32618 00034 (v01 INTEL 00000002 MSFT 0000005F) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Zone ranges: 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Normal [mem 0x100000000-0x436ffffff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Movable zone start for each node 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Early memory node ranges 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] node 0: [mem 0x00001000-0x0009bfff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] node 0: [mem 0x00100000-0xb3dfdfff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] node 0: [mem 0xb3e33000-0xb41d3fff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] node 0: [mem 0xb41d6000-0xc0e2dfff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] node 0: [mem 0xc2547000-0xc2701fff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] node 0: [mem 0xc32ff000-0xc32fffff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] node 0: [mem 0x100000000-0x436ffffff] 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4104442 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Power on seq num: 0 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Synology Hardware Version: DS3617xs-j 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Vender format version: 2 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Serial Number: A8ODN02468 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Mac1: 00006c0bf764 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.000000] Internal netif num: 1 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.005000] tsc: Unable to calibrate against PIT 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.018479] ACPI: All ACPI Tables successfully acquired 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.107883] raid6: sse2x1 gen() 12765 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.124890] raid6: sse2x1 xor() 9228 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.141898] raid6: sse2x2 gen() 16082 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.158902] raid6: sse2x2 xor() 11046 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.175911] raid6: sse2x4 gen() 16996 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.192917] raid6: sse2x4 xor() 12468 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.209923] raid6: avx2x1 gen() 25718 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.226928] raid6: avx2x2 gen() 29234 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.243934] raid6: avx2x4 gen() 32777 MB/s 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.243935] raid6: using algorithm avx2x4 gen() (32777 MB/s) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.243935] raid6: using avx2x2 recovery algorithm 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.256169] ACPI: Executed 36 blocks of module-level executable AML code 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.275166] ACPI: SSDT 0x00000000C14E3898 003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.275674] ACPI: Executed 1 blocks of module-level executable AML code 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.275676] ACPI: Dynamic OEM Table Load: 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.275677] ACPI: SSDT 0x0000000000000000 003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.275763] ACPI: SSDT 0x00000000C24F8398 00759 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.276266] ACPI: Executed 1 blocks of module-level executable AML code 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.276268] ACPI: Dynamic OEM Table Load: 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.276269] ACPI: SSDT 0x0000000000000000 00759 (v02 PmRef Cpu0Ist 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.283270] ACPI: SSDT 0x00000000C14E3018 0065C (v02 PmRef ApIst 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.283819] ACPI: Executed 1 blocks of module-level executable AML code 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.283820] ACPI: Dynamic OEM Table Load: 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.283821] ACPI: SSDT 0x0000000000000000 0065C (v02 PmRef ApIst 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.286185] ACPI: SSDT 0x00000000C14E3DD8 0018A (v02 PmRef ApCst 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.286697] ACPI: Executed 1 blocks of module-level executable AML code 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.286699] ACPI: Dynamic OEM Table Load: 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.286700] ACPI: SSDT 0x0000000000000000 0018A (v02 PmRef ApCst 00003000 INTL 20160422) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 0.311842] ACPI: Enabled 4 GPEs in block 00 to 7F 2017-05-22T08:00:31+01:00 SR2 kernel: [ 1.335112] bounce pool size: 64 pages 2017-05-22T08:00:31+01:00 SR2 kernel: [ 1.335541] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.354910] broadwell_synobios: module license 'Synology Inc.' taints kernel. 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.354912] Disabling lock debugging due to kernel taint 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.355298] 2017-5-22 7:0:21 UTC 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.355302] Brand: Synology 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.355303] Model: DS-3617xs 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.355304] set group disks wakeup number to 4, spinup time deno 7 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.359735] synobios: unload 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.438803] md: invalid raid superblock magic on sda3 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.443942] md: sda3 does not have a valid v0.90 superblock, not importing! 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.509131] md: invalid raid superblock magic on sdb3 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.514254] md: sdb3 does not have a valid v0.90 superblock, not importing! 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.591271] md: invalid raid superblock magic on sdc3 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.596393] md: sdc3 does not have a valid v0.90 superblock, not importing! 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.596398] md: sda2 has different UUID to sda1 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.596400] md: sdb2 has different UUID to sda1 2017-05-22T08:00:31+01:00 SR2 kernel: [ 2.596403] md: sdc2 has different UUID to sda1 2017-05-22T08:00:31+01:00 SR2 kernel: [ 4.757300] usb 2-3: Parent hub missing LPM exit latency info. Power management will be impacted. 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.527504] sd 4:0:0:0: [synoboot] No Caching mode page found 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.533472] sd 4:0:0:0: [synoboot] Assuming drive cache: write through 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.541566] sd 4:0:0:0: [synoboot] No Caching mode page found 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.547478] sd 4:0:0:0: [synoboot] Assuming drive cache: write through 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.564075] sd 4:0:0:0: [synoboot] No Caching mode page found 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.570093] sd 4:0:0:0: [synoboot] Assuming drive cache: write through 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.760722] sd 5:0:0:0: [sdu] No Caching mode page found 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.766168] sd 5:0:0:0: [sdu] Assuming drive cache: write through 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.773731] sd 5:0:0:0: [sdu] No Caching mode page found 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.779238] sd 5:0:0:0: [sdu] Assuming drive cache: write through 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.787040] sd 5:0:0:0: [sdu] No Caching mode page found 2017-05-22T08:00:31+01:00 SR2 kernel: [ 5.792506] sd 5:0:0:0: [sdu] Assuming drive cache: write through 2017-05-22T08:00:31+01:00 SR2 kernel: [ 6.002365] Got empty serial number. Generate serial number from product. 2017-05-22T08:00:31+01:00 SR2 kernel: [ 6.002434] usb 1-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes 2017-05-22T08:00:31+01:00 SR2 kernel: [ 6.002436] usb 1-7: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes 2017-05-22T08:00:31+01:00 SR2 s70_synocheckhw: fan/fan_adjust_config_full_speed.c:90 Cannot find HIGH fan table. 2017-05-22T08:00:32+01:00 SR2 kernel: [ 13.700802] zram: module is from the staging directory, the quality is unknown, you have been warned. 2017-05-22T08:00:33+01:00 SR2 synoservice: synoservice.c:1559 pause gcpd due to require service cupsd runkey is stop 2017-05-22T08:00:33+01:00 SR2 root: mkcert: Verifying certificate in [/usr/syno/etc/certificate/system/default]. 2017-05-22T08:00:33+01:00 SR2 [ 15.272765] init: syno-auth-check main process (5373) killed by TERM signal 2017-05-22T08:00:35+01:00 SR2 kernel: [ 16.377586] 2017-5-22 7:0:35 UTC 2017-05-22T08:00:35+01:00 SR2 kernel: [ 16.377591] Brand: Synology 2017-05-22T08:00:35+01:00 SR2 kernel: [ 16.377592] Model: DS-3617xs 2017-05-22T08:00:35+01:00 SR2 kernel: [ 16.377593] set group disks wakeup number to 4, spinup time deno 7 2017-05-22T08:00:35+01:00 SR2 interface-catcher: eth0 (inet 192.168.1.240 netmask 255.255.255.0 mtu 1500) is added 2017-05-22T08:00:35+01:00 SR2 interface-catcher: lo (inet 127.0.0.1 netmask 255.0.0.0 ) is added 2017-05-22T08:00:35+01:00 SR2 synonetdtool: dbus_client.cpp:216 Failed to send message: The name com.synology.net was not provided by any .service files (-1) 2017-05-22T08:00:35+01:00 SR2 synonetdtool: dbus_client.cpp:216 Failed to send message: The name com.synology.net was not provided by any .service files (-1) 2017-05-22T08:00:36+01:00 SR2 synonetdtool: SYSTEM: Last message 'dbus_client.cpp:216 ' repeated 1 times, suppressed by syslog-ng on SR2 2017-05-22T08:00:36+01:00 SR2 synostorage: synostorage_int_disk.c:279 Disk [sda] info cache generated 2017-05-22T08:00:36+01:00 SR2 synostorage: synostorage_int_disk.c:279 Disk [sdc] info cache generated 2017-05-22T08:00:36+01:00 SR2 synostorage: synostorage_int_disk.c:279 Disk [sdb] info cache generated 2017-05-22T08:00:36+01:00 SR2 spacetool.shared: spacetool.c:3106 [info] Activate all VG 2017-05-22T08:00:36+01:00 SR2 spacetool.shared: spacetool.c:3160 space: [/dev/md2] 2017-05-22T08:00:36+01:00 SR2 spacetool.shared: spacetool.c:3186 space: [/dev/md2], ndisk: [3] 2017-05-22T08:00:37+01:00 SR2 spacetool.shared: hotspare_repair_config_set.c:36 Failed to hup synostoraged 2017-05-22T08:00:37+01:00 SR2 synovspace: virtual_space_conf_check.c:78 [iNFO] "PASS" checking configuration of virtual space [FCACHE], app: [1] 2017-05-22T08:00:37+01:00 SR2 synovspace: virtual_space_conf_check.c:74 [iNFO] No implementation, skip checking configuration of virtual space [HA] 2017-05-22T08:00:37+01:00 SR2 synovspace: virtual_space_conf_check.c:74 [iNFO] No implementation, skip checking configuration of virtual space [sNAPSHOT_ORG] 2017-05-22T08:00:37+01:00 SR2 synovspace: vspace_wrapper_load_all.c:76 [iNFO] No virtual layer above space: [/volume1] / [/dev/md2] 2017-05-22T08:00:39+01:00 SR2 kernel: [ 20.657356] BTRFS: has skinny extents 2017-05-22T08:00:40+01:00 SR2 synocheckhotspare: synocheckhotspare.c:150 [iNFO] No hotspare config, skip hotspare config check. [0x2000 virtual_space_layer_get.c:97] 2017-05-22T08:00:41+01:00 SR2 kernel: [ 22.630025] Get empty minor:104 2017-05-22T08:00:41+01:00 SR2 syno_hdd_util: Model:[HTS721010A9E630], Firmware:[JB0OA3J0], S/N:[JR10006P10BSJE] in [/dev/sdc] is not ssd 2017-05-22T08:00:41+01:00 SR2 syno_hdd_util: Model:[HTS721010A9E630], Firmware:[JB0OA3J0], S/N:[JR10006PHB1H9E] in [/dev/sdb] is not ssd 2017-05-22T08:00:41+01:00 SR2 syno_hdd_util: Model:[HTS721010A9E630], Firmware:[JB0OA3B0], S/N:[JG40006PG8WW2C] in [/dev/sda] is not ssd 2017-05-22T08:00:42+01:00 SR2 synoiscsiep: iscsi_start_all.cpp:93 Successfully started iSCSI service. 2017-05-22T08:00:43+01:00 SR2 synodrivehook: synodrivehook.cpp:210 Failed [FALSE == SLIBServiceIsRunning(SZ_PGSQL_SERVICE_NAME)], err=No such file or directory 2017-05-22T08:00:44+01:00 SR2 manutild: manutild.c:2896 /.start_manutild not exist, finish manutild 2017-05-22T08:00:44+01:00 SR2 synousbdisk: RCClean succeeded 2017-05-22T08:00:44+01:00 SR2 root: mkcert: Verifying certificate in [/usr/syno/etc/certificate/system/default]. 2017-05-22T08:00:45+01:00 SR2 synodrivehook: synodrivehook.cpp:210 Failed [FALSE == SLIBServiceIsRunning(SZ_PGSQL_SERVICE_NAME)], err=No such file or directory 2017-05-22T08:00:46+01:00 SR2 [ 27.426231] init: iscsi_pluginserverd main process (9526) terminated with status 255 2017-05-22T08:00:46+01:00 SR2 [ 27.426258] init: iscsi_pluginserverd main process ended, respawning 2017-05-22T08:00:46+01:00 SR2 hotplugd: hotplugd.c:1092 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/002, usbid=1058:259d:57584A314139364B44484854 [0x2200 file_get_section_value.c:28] 2017-05-22T08:00:46+01:00 SR2 hotplugd: hotplugd.c:1335 ##### ACTION:add 2017-05-22T08:00:46+01:00 SR2 hotplugd: DEVNAME:sdu 2017-05-22T08:00:46+01:00 SR2 hotplugd: DEVICE:/proc/bus/usb/002/002 2017-05-22T08:00:46+01:00 SR2 hotplugd: DEVGUID:57584A314139364B444848540 2017-05-22T08:00:46+01:00 SR2 hotplugd: DEVPATH:sdu 2017-05-22T08:00:46+01:00 SR2 hotplugd: SUBSYSTEM:block 2017-05-22T08:00:46+01:00 SR2 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/host5/target5:0:0/5:0:0:0 2017-05-22T08:00:46+01:00 SR2 hotplugd: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client. 2017-05-22T08:00:46+01:00 SR2 hotplugd: hotplugd.c:1478 ==== USB disk [sdu] plugged in ==== 2017-05-22T08:00:46+01:00 SR2 hotplugd: hotplugd.c:1479 goto USB disk, szDeviceName=sdu 2017-05-22T08:00:46+01:00 SR2 hotplugd: external_storage_parts_vol_info_get.c:98 Dev:sdu cannot find PostfixNumber. 2017-05-22T08:00:47+01:00 SR2 synocheckshare: synocheckshare_vol_mount.c:47 Export Share [uSB] [/dev/sdu1] [/volumeUSB1/usbshare] 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1335 ##### ACTION:add 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVNAME:sda 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVGUID:JG40006PG8WW2C0 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVPATH:sda 2017-05-22T08:00:51+01:00 SR2 hotplugd: SUBSYSTEM:block 2017-05-22T08:00:51+01:00 SR2 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:17.0/ata1/host0/target0:0:0/0:0:0:0 2017-05-22T08:00:51+01:00 SR2 hotplugd: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client. 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1431 ==== SATA disk [sda] hotswap [add] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: disk/disk_config_single.c:209 apply /usr/syno/bin/DiskApmSet.sh 255 /dev/sda 1>/dev/null 2>&1 2017-05-22T08:00:51+01:00 SR2 hotplugd: disk/disk_config_single.c:209 apply /usr/syno/bin/syno_disk_ctl --ncq-on /dev/sda 1>/dev/null 2>&1 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1452 ==== SATA disk [sda] Model: [HTS721010A9E630 ] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1453 ==== SATA disk [sda] Serial number: [JG40006PG8WW2C] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1454 ==== SATA disk [sda] Firmware version: [JB0OA3B0] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1335 ##### ACTION:add 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVNAME:sdb 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVGUID:JR10006PHB1H9E0 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVPATH:sdb 2017-05-22T08:00:51+01:00 SR2 hotplugd: SUBSYSTEM:block 2017-05-22T08:00:51+01:00 SR2 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:17.0/ata2/host1/target1:0:0/1:0:0:0 2017-05-22T08:00:51+01:00 SR2 hotplugd: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client. 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1431 ==== SATA disk [sdb] hotswap [add] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: disk/disk_config_single.c:209 apply /usr/syno/bin/DiskApmSet.sh 255 /dev/sdb 1>/dev/null 2>&1 2017-05-22T08:00:51+01:00 SR2 hotplugd: disk/disk_config_single.c:209 apply /usr/syno/bin/syno_disk_ctl --ncq-on /dev/sdb 1>/dev/null 2>&1 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1452 ==== SATA disk [sdb] Model: [HTS721010A9E630 ] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1453 ==== SATA disk [sdb] Serial number: [JR10006PHB1H9E] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1454 ==== SATA disk [sdb] Firmware version: [JB0OA3J0] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1335 ##### ACTION:add 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVNAME:sdc 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVGUID:JR10006P10BSJE0 2017-05-22T08:00:51+01:00 SR2 hotplugd: DEVPATH:sdc 2017-05-22T08:00:51+01:00 SR2 hotplugd: SUBSYSTEM:block 2017-05-22T08:00:51+01:00 SR2 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:17.0/ata3/host2/target2:0:0/2:0:0:0 2017-05-22T08:00:51+01:00 SR2 hotplugd: scemd_connector/scemd_connector.c:134 Fail to sendto() for scemd connector client. 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1431 ==== SATA disk [sdc] hotswap [add] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: disk/disk_config_single.c:209 apply /usr/syno/bin/DiskApmSet.sh 255 /dev/sdc 1>/dev/null 2>&1 2017-05-22T08:00:51+01:00 SR2 hotplugd: disk/disk_config_single.c:209 apply /usr/syno/bin/syno_disk_ctl --ncq-on /dev/sdc 1>/dev/null 2>&1 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1452 ==== SATA disk [sdc] Model: [HTS721010A9E630 ] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1453 ==== SATA disk [sdc] Serial number: [JR10006P10BSJE] ==== 2017-05-22T08:00:51+01:00 SR2 hotplugd: hotplugd.c:1454 ==== SATA disk [sdc] Firmware version: [JB0OA3J0] ==== 2017-05-22T08:00:53+01:00 SR2 serv-bootup-timeout.sh: all service finish boot up. 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire pam-config for WebDAVServer when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SnapshotReplication when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SnapshotReplication when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: SYSTEM: Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on SR2 2017-05-22T08:00:54+01:00 SR2 synoenc: enclosure_host_enum.c:31 failed to use glob to find disk path:/sys/class/sas_host/host* 2017-05-22T08:00:54+01:00 SR2 synoenc: enclosure_list_enum.c:202 failed to get enclosure head, please check enclosure firmware/hardware 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SynoFinder when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for SynoFinder when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: SYSTEM: Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on SR2 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for FileStation when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for FileStation when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: SYSTEM: Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on SR2 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire web-config for FileStation when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for HyperBackup when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for HyperBackup when 0x0000 (done) 2017-05-22T08:00:54+01:00 SR2 synopkgctl: SYSTEM: Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on SR2 2017-05-22T08:00:54+01:00 SR2 root: == DSM 6.1 15101-2 finished boot up == 2017-05-22T08:00:55+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for Docker when 0x0000 (done) 2017-05-22T08:00:55+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire webapi-desc for Docker when 0x0000 (done) 2017-05-22T08:00:55+01:00 SR2 synopkgctl: SYSTEM: Last message 'resource_api.cpp:163' repeated 1 times, suppressed by syslog-ng on SR2 2017-05-22T08:00:55+01:00 SR2 synopkgctl: resource_api.cpp:163 Acquire web-config for NoteStation when 0x0000 (done) 2017-05-22T08:00:55+01:00 SR2 thumbd: dispatcher.cpp:21 (11686, 0) start dispatcher thread 2017-05-22T08:00:55+01:00 SR2 thumbd: worker_pool.cpp:69 (11686, 0) start worker pool 2017-05-22T08:00:55+01:00 SR2 thumbd: pool_monitor.cpp:79 (11686, 0) start pool monitor 2017-05-22T08:00:57+01:00 SR2 updater: utils.cpp:188 Run SUS available updates 2017-05-22T08:01:04+01:00 SR2 synoddsmd: synoddsm-hostd.cpp:227 Fail to get DDSM licenses, errCode: 0x100 2017-05-22T08:01:04+01:00 SR2 gateway_change hook event: NEW 0.0.0.0 on docker0 2017-05-22T08:01:06+01:00 SR2 kernel: [ 47.711239] cgroup: docker-runc (12666) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future. 2017-05-22T08:05:51+01:00 SR2 if_link_down hook event: eth0 2017-05-22T08:05:51+01:00 SR2 [ 332.824098] init: nmbd main process (13812) killed by TERM signal 2017-05-22T08:05:58+01:00 SR2 if_link_up hook event: eth0 2017-05-22T08:05:58+01:00 SR2 [ 340.034218] init: nmbd main process (14460) killed by TERM signal 2017-05-22T08:05:59+01:00 SR2 gateway_change hook event: NEW 0.0.0.0 on eth0 2017-05-22T08:05:59+01:00 SR2 dns_change hook event: (1) DNS1=192.168.1.1 2017-05-22T08:05:59+01:00 SR2 gateway_change hook event: NEW 192.168.1.1 on eth0 2017-05-22T08:05:59+01:00 SR2 gateway_change hook event: DEL 192.168.1.1 on eth0 2017-05-22T08:05:59+01:00 SR2 gateway_change hook event: NEW 192.168.1.1 on eth0

I've had barely any issues at all with this release (v1.02a2) but twice now after restarting my system the network interface failed to start. The fix is unplugging and replugging the network cable from the machine. I've had this loader for around 3 weeks now with an auto power off and power on task so 95% of the time I've not encountered this problem. Any ideas what could be causing this? The PC has an integrated Realtek RTL8111H NIC. Thanks.

Migration didn't work for me either for whatever reason. I always recommend doing a simple data import without importing settings/apps. Sent from my SM-G935F using Tapatalk

Anyone know why official SHR support is so flaky? Is there a reason why Synology don't support it on some of their high end devices? Sent from my SM-G935F using Tapatalk

In theory it should work as DSM runs on top of Linux. I believe Linux has native support for multiple CPU sockets. Don't have any tests to back that up with DSM though. Sent from my SM-G935F using Tapatalk

I believe he is asking about running Xpenology in an ESXi VM vs bare metal. One would be insane to use the built in virtualization built into Xpenology vs VMware or other well developed methods, unless it's, just to try it. Who would use Xpenology for production? I would fire you for even suggesting that! Now that said, I run Xpenology in an ESXi 6.0 VM, and it runs very well and I will not run it bare metal, but for my Sophos firewall I run it bare metal, save lots of problems when you play with servers and VM's. The only reason I use Xpenology is for hobby use and because of SHR. It makes the best use of old odd sized hard drives. For any other important storage I use ZFS, whether it is freenas, nas4free or omnios & napp-it. I never said I'd use Xpenology for production, I'd use FreeNAS personally. Sent from my SM-G935F using Tapatalk

It's probably easier to buy a cheap supported Intel NIC and use that instead. Sent from my iPad using Tapatalk

Are you referring to running Xpenology on top of a virtualisation layer for production? As that would be an incredibly dumb idea from many perspectives. If you're instead asking about replacing Xpenology with VMware then I'd say it's a good idea if you do an ample amount of virtualisation. Personally I'd host my datastore on a FreeNAS or Synology for the performance and backup features they offer. Sent from my iPad using Tapatalk

That's really sweet! Anyone tested how well this works with 1.0.2a2?

Yeah don't use find.synology.com as it doesn't work properly. The official finder app however works great. Power button package is found below, I've tested it on my bare metal 1.0.2a2 DSM and in VBox and it works just fine. http://xpenology.com/forum/viewtopic.php?t=32773 Sent from my SM-G935F using Tapatalk

No need for any drivers from what I've tested, you may need to install the power button package if you would like to perform a graceful shutdown from the host (shutting down/restarting via DSM web interface works fine). USB 3 also works without issues on 3 completely different systems I tested.

I've created a OVA specifically for VirtualBox from Jun's 1.0.2a2 Loader. It's based on the DS3617xs image provided in the following post: http://xpenology.com/forum/viewtopic.php?f=2&t=20216 Hopefully others will find it useful too, just attach one or more VHDs to the VM and you'll be able to find it using Synology Assistant. I strongly recommend the desktop version as the web version rarely works for me https://drive.google.com/file/d/0B2OeA4Xy1JA6ejA1dzFoc3NFWVE/view?usp=sharing

Me neither :s Sent from my SM-G935F using Tapatalk

I no longer see Deluge with 6.1.x It looks like many apps are dependant on a certain version of DSM.

+1, can confirm that having Plex installed and active prevents disks from going into hibernation. My disks were power saving as normal until I got my Plex up and running. And yes I agree that scheduling your machine to turn off overnight is a better option. Sent from my iPad using Tapatalk

Have you tried unplugging and reinserting your network cable when your Xpenology is in this state? Every time I've lost connectivity this has worked for me. Sent from my SM-G935F using Tapatalk

Good to hear! It's pretty easy to enable SSH, just do it through the GUI in DSM. You should login using admin rather than root (as root doesn't work OOTB with DSM), you can still use sudo with your regular DSM admin password.

2. Spoofing is another word for faking, if you don't put in your real MAC address into grub.cfg, your network card is having to fake its identity in simple terms. 3. When you setup the Xpenology bootloader you'll see the following entry within grub.cfg: You'll want to figure out what your NIC's real MAC address is, this can be done a number of ways but the easiest (assuming you know what your IP address is) to run "arp -a" from command prompt in Windows. You need to put the physical address you see into the variable above without the formatting so rather than 00:11:32:2C:A6:03 it needs to be 0011322CA603. As Jun mentioned, it's not mandatory to change the MAC address but from my own testing I find using your real MAC address works best. 4. I'm using DS3617xs, I've not tried the other. EDIT: Forgot to mention that before you try and figure out your MAC address, it's essential that you unplug your system from power completely and leave it off for up to 5 mins. Do not boot back into the loader without changing the MAC address entry otherwise you'll get the spoofed MAC address rather than your real one.

I have the EXACT same motherboard and CPU as you and mine works without any issues on 1.0.2a2, make sure your BIOS is up-to-date. One thing I've discovered is that the NIC inside this motherboard doesn't like to be spoofed, so ensure you use your real MAC address for the loader. If you're using a fake MAC address then fully power off and unplug your system for 5 mins; I've noticed the spoofed MAC address is persistent as long as the system is connected to the wall. Also don't select any of the options within the loader, just boot straight to the defaults and you'll be able to find it. One more quirk is that the Synology Finder software (including the website version) is unreliable with Xpenology, so I'd use an IP scanner to figure out what your IP address is. Better yet, reserve a Mac address

+1 Sent from my SM-G935F using Tapatalk

Yep exactly what you said. Mine used to work perfectly, I guess they caught onto our hacking ways! It's not a deal breaker for me though, you can easily setup a dynamic dns on a third party router.

Any plans to release 1.02 proper Jun? 1.02a2 has been rock stable for me both in VMware and my Baremetal Skylake system Sent from my SM-G935F using Tapatalk

Any news on stable 6.1 Jun? Many thanks!

In that case a privately hosted github repo should work?

That could also mean that 1.02 will be 6.1 sources based AND out of alpha But we'd definitely need a better organized thread, and definitely better organized releases (possibly even on Github?) +1, not sure why we've got this crazy forum thread going when hosting the project on github would allow us to properly raise bug reports and monitor progress. Thoughts?