Jump to content
XPEnology Community

Rapp

Transition Member
  • Posts

    8
  • Joined

  • Last visited

Everything posted by Rapp

  1. Rapp

    N54L network issue

    Thanks for the reply, when I run that I get the following. [3.162228] jme: JMicron JMC2XX Ethernet driver version 1.0.8 [10.072501] usbcore: registered new interface driver ethub So looks like it does have the driver, any other idea's?
  2. Rapp

    N54L network issue

    No I can't do anything on the box remotely, the NIC interface just doesn't come online. I have been playing around with it for a little bit and found the config for eth0 under /etc/sysconfig/network-scripts/ifcfg-eth0 which is configured as below DEVICE=eth0 ONBOOT=yes IPADDR=192.168.1.42 NETMASK=255.255.255.0 Guessing I may have broken something as when I run ifconfig I get the following message now ifconfig: eth0: error fetching interface information: Device not found Looking under /etc/sysconfig/networking I only have the file ifcfg-lo and not sure if I should have a file there for eth0 or not? Anyone with a better understanding of this would be much appreciate, I just want to get my files off so I can rebuild the thing now.
  3. Rapp

    N54L network issue

    Does anyone have any idea's about this? Or am I going to have to start the long process of manually copying my files off to a USB hard drive.
  4. I have been away on holiday and shutdown my HP N54L running 4.3 and when coming back I have powered the system back on but can't seem to get any network connectivity from it. The NIC of the back of the box looks fine it is flashing green/orange etc but it doesn't seem to come online. I have connected directly on the box and am able to get into the system and if I run ifconfig I only get showned the lo interface and a 127.0.0.1 address. I run etc/rc.network restart I get the following messages ifconfig: SIOCSIFADDR: No such device Unloading module llc ... [FAILED] I have also tried running ifconfig eth0 192.168.1.99 netmask 255.255.255.0 broadcast 192.168.0.255 up but get the same message "ifconfig: SIOCSIFADDR: No such device" Any idea's what could be going on? I had manually configured a static IP on the box which had been working fine for months.
  5. Can anyone help me upgrade from DMS 4.3-3810 Update 3 to 4.3-3810 Update 4. I have tried doing the quote below but when I check for updates I just get the message "Connection failed. Please check your Internet connection"
  6. Can anyone help me upgrade from DMS 4.3-3810 Update 3 to 4.3-3810 Update 4. I have tried doing the quote below but when I check for updates I just get the message "Connection failed. Please check your Internet connection"
  7. Are you using a modified bios? and if so which one?
  8. Has anyone managed to find a fix for the issue with the bios getting reset for the N54L yet?
×
×
  • Create New...