Jump to content
XPEnology Community

DerMoeJoe

Member
  • Posts

    48
  • Joined

  • Last visited

Everything posted by DerMoeJoe

  1. ive tested it.. on esxi after converting the vmdk its not bootable. within vmware workstation it is booting. but within the tinycorelinux ive got a couple of problems.. ssh is not installed and enabled. after installing openssh and enabling/starting it this works. next problem is that the scripts arent executeable after transfering them with chmod +x rploader.sh this is done. but unable to start them after, cause the env variables for starting bash scripts isnt setup properly.. after doing this i only got a lot of warnings within the rploader.sh script in a couple of lines... tested with the acutally newest verision from the repo (9days old v0.4.4)
  2. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3 update 2 - Loader version and model: Jun's v1.04b - DS918+ - Using custom extra.lzma: No - Installation type: BareMetal | ASRock B250M Pro4 | i5-6400T | Intel X520-QDA1 | 4x WD Red 3TB & 2x 128GB Intenso NVME - Additional comments: before upgrade removed NVME Cache, after Upgrade recreated the Cache. All Fine including the 10G NIC
  3. Intel x520 and the other Variants works with Stock. Gesendet von meinem Mi A3 mit Tapatalk
  4. But the read only cache still works with the new Update. Gesendet von meinem Mi A3 mit Tapatalk
  5. Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25426 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BareMetal | ASRock B250M Pro4 | i5-6400T | Intel X520-QDA1 | 4x WD Red 3TB & 2x 128GB Intenso NVME - Additional comments: all fine
  6. yes, the stick must stay in the NAS... so u can use any old 256mb usb stick for the loader...
  7. The Boot Stick must be placed on the Board. The Boot Stick is Not o ly for the install of xpenology. Its also the Boot Stick for the Software! Gesendet von meinem Mi A3 mit Tapatalk
  8. - Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.3-25423 - Loader version and model: Jun's v1.04 - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - ASRock B250M Pro4 | i5-6400T | Intel x520 | 2x 120GB NVME - Additional comment : removed the NMVE Cache before Upgrade, Installd PAT Manualy, after 2 reboots and aprox. 5 minutes System was UP again. recreate the NVME Cache. 10G Nic works fine as always (without any additional drivers).
  9. https://www.synology.com/en-global/releaseNote/DS3615xs
  10. @The Chief @flyride thanks for your help. with the modded libary file it works again (y) important is, that the libary must be placed as u said within the /lib64/ on my first test ive searched for the original file and found it on /usr/lib/ and replaced this file, but after this the WEB GUI wasnt working. probably this is a good option to point the libary with the path in the STARTER Post. (or make another bookmarked topic or something for this)
  11. @The Chief thanks for your work, but the new nvme patch doesnt works for me with 6.2.3. ive relpaced the old patch, modified the rights with chmod, started the script and rebooted the NAS, but im unable to see the nvme drives within the storrage manager.
  12. Before the Upgrade to 6.2.3 i removed the Cache (aß always Before an Update). After the Update u still cann See the Hardware With console. But running the Script and performing a reboot wouldnt help until now to get the Cache up again.
  13. Outcome of the installation/update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922 Update 6 - Loader version and model: Jun's Loader v1.04b - DS918+ - Using custom extra.lzma: NO - Installation type: BAREMETAL - (ASRock B250M Pro4 | i5-6400T | Intel X520-DA1 | 4x WD Red 3TB, 2x Intenso NVME 120GB) - Additional comments: Reboot required by the update. But the Nvme Cache doesnt works after the Update!
  14. Update: after restart the script for enabling the nvme cache and make a full reboot i was able again to setup the nvme cache with the 2 drives.
  15. short update... ive swapped the 2 nvme ssds ports... and now i've got the following.. root@FSK-NAS:~# nvme list Node SN Model Namespace Usage Format FW Rev ---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- -------- /dev/nvme0n1 3QLUS7RSFP174FJTPDR5 INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 /dev/nvme1n1 OWNUZUMYDV8D9WHNPMAA INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 /dev/nvme1n1p1 OWNUZUMYDV8D9WHNPMAA INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 root@FSK-NAS:~# does someone got any idea why i can see now 3 nvme disks within the SHELL ? and on the GUI again only 1 is usable.
  16. ive upgraded my DSM (3 days before) to u6 and before the update ive removed the ssd cache. after the upgrade was done ive recreated the cache.. and then yesterday at night one if my 2 nvme cache ssd's get corrupted (DSM said). on the CLI i can see both nvme ssd's. but insight synology DSM i only can see 1. root@NAS:~# nvme list Node SN Model Namespace Usage Format FW Rev ---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- -------- /dev/nvme0n1 3QLUS7RSFP174FJTPDR5 INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 /dev/nvme0n1p1 3QLUS7RSFP174FJTPDR5 INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 root@NAS:~# so i removed the damaged ssd cache drive, make a proper reboot of the DSM, restarted the script from "The Chief" make again a reboot... and after this again i only can see 1 nvme drive insight the DSM but 2 drives on CLI. got someone a hint for me ?
  17. Schau dir mal das silverstone ds380 an. Da passen 8 3.5" Platten rein. Gesendet von meinem Mi A3 mit Tapatalk
  18. hy likedoc, d u work on a update for the nuew 6.2.2. u5 for the ds918+ ?
  19. Outcome of the update: SUCCESSFUL - DSM version prior update: DSM 6.2.2-24922-update 4 - Loader version and model: JUN'S LOADER v1.04b - DS918+ - Using custom extra.lzma: YES (IG-88 v0.6) - Installation type: BAREMETAL - ASRock B250M Pro4 / Intel X520-DA1 / 4x WD Red 3TB / 2x Intenso nVME 120GB SSD - Additional comments: REBOOT REQUIRED. removed SSD Cache before the Upgrade, after Reboot recreated the Cache again.
  20. Sounds like your source (the Backup hdd) is the Limit.... Not your network Gesendet von meinem Mi A3 mit Tapatalk
  21. for me it works fine... with 2x 120gb intenso nvme ssd's in RW Cache Mode.
  22. @The Chief damn... ive forgot the basic's... thx for your hint. now it works (y)
  23. @The Chief thanks for your good work, ive tried your script to get my test cache ssd to work... im running DSM 6.2.2-24922 U4 on Baremetal ASRock B250M with Intel i5-6400T ive copied your script to the NAS, started the shell script as ROOT and after this ive copied the file to /usr/local/etc/rc.d/ and rebooted the NAS with init 6.... but after the reboot my NVME isnt alive on the volume manager. Its an Intenso 128GB NVME root@NAS:/# nvme list Node SN Model Namespace Usage Format FW Rev ---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- -------- /dev/nvme0n1 3QLUS7RSFP174FJTPDR5 INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 /dev/nvme0n1p1 3QLUS7RSFP174FJTPDR5 INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 /dev/nvme0n1p2 3QLUS7RSFP174FJTPDR5 INTENSO 1 128.04 GB / 128.04 GB 512 B + 0 B R1115A0 root@NAS:/ root@NAS:/# synonvme --is-nvme-ssd /dev/nvme0n1 It is a NVMe SSD root@NAS:/# root@NAS:/# synonvme --model-get /dev/nvme0 Model name: INTENSO root@NAS:/# udevadm info /dev/nvme0n1 P: /devices/pci0000:00/0000:00:1d.0/0000:01:00.0/nvme/nvme0/nvme0n1 N: nvme0n1 E: DEVNAME=/dev/nvme0n1 E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/0000:01:00.0/nvme/nvme0/nvme0n1 E: DEVTYPE=disk E: ID_PART_TABLE_TYPE=gpt E: MAJOR=259 E: MINOR=0 E: PHYSDEVBUS=pci E: PHYSDEVDRIVER=nvme E: PHYSDEVPATH=/devices/pci0000:00/0000:00:1d.0/0000:01:00.0 E: SUBSYSTEM=block E: SYNO_ATTR_SERIAL=3QLUS7RSFP174FJTPDR5 E: SYNO_DEV_DISKPORTTYPE=UNKNOWN E: SYNO_INFO_PLATFORM_NAME=apollolake E: SYNO_KERNEL_VERSION=4.4 E: USEC_INITIALIZED=648737 root@NAS:/# when i look for the age of the file libsynonvme.so i can see that it was modded. (by the date) root@NAS:/usr/lib# ls -l total 145160 lrwxrwxrwx 1 root root 16 Nov 29 17:35 libsynonvme.so -> libsynonvme.so.1 -rw-r--r-- 1 root root 33578 May 9 2019 libsynonvme.so.1 d u got a hint for me?
  24. Bare Metal Gigabyte n3150-d3v 8gb so dimm 4x 3 tb wd Red @raid 5 Dual onboard nic with lacp With 25w @ file Transfer and 39w on Video Playback Ds3617 Image running Gesendet von meinem SM-G950F mit Tapatalk
  25. I use this Board with the 3615xs Image... And it is running fine. If this helps
×
×
  • Create New...