gnoboot
-
Posts
278 -
Joined
-
Last visited
Posts posted by gnoboot
-
-
It took so long before finally releasing this iSCSI patch to the community. I'm no longer interested in maintaining/keeping this stuff.
Releasing my kernel build script soon, but no support or whatever. If you want to donate or appreciate my work email me.
-
Sorry but it is still not working for me. Again ive attached the Debug log.
10_5 ( not working)
[ 10.433168] sd_probe: Got UNKNOWN dev_prefix (sd), index (4), disk_name (sde), disk_len (20)
10_4 (working)
[ 11.305137] sd_probe: Got UNKNOWN dev_prefix (sd), index (6), disk_name (sdg), disk_len (20)
The good News is that my cynergy t2 is working now
Did you try manually reloading mpt2sas driver after booting up DSM?
gnoboot> rmmod mpt2sas gnoboot> insmod /lib/modules/mpt2sas.ko && dmesg | tail -n 50 or gnoboot> insmod /lib/modules/mpt2sas.ko missing_delay=1000 && dmesg | tail -n 50
And post the result of 2nd command.
-
Hello,
with 10.5 my PERC310 (8 SATA/SAS-Port Controller) doesnt work, the Volume is not showing up...with 10.4 it works great...PLS Help
I´ve created the Volume in the BIOS settings (4 SAS Drives / 1 Volume) so i dont have to create an Software-Raid in the DSM.
I'm using 9211-8i and it works (IR mode) for me on ESXi+vt-d. Are you using baremetal or vt-d? Doesn't show in DSM or doesn't detect the disk?
Have you been able to get disks conected to the 9211-8i to start from Disk1-Disk8?
Do i need to blacklist any other drivers to make sure theres no unused slots before the disks on the raid card?
Also , Will flashing IT firmware instead of IR benifit in any way?
You have to blacklist the boot image disk (ata_piix) using rmmod GRUB option.
Put the following lines in your /boot/grub/menu_alpha.lst
kernel /zImage rmmod=ata_piix,r8169,r8169_new
To load the wireless or multimedia drivers, put the following lines in /etc/rc.local.
#!/bin/sh source /etc/rc.subr source /.gnoboot/modules.d/03-wifi.conf source /.gnoboot/modules.d/05-media.conf SYNOLoadModules $WIFI_MOD SYNOLoadModules $MEDIA_MOD
If video station still doesn't work, then you have to figure it out by yourself. I don't support anything related to DSM.
-
-
Hello,
I´m using it as baremetal. I don´t know in which Mode the Adapter is running. I diddnt switch anything so it runs unmodifeyd. The Volume was not shown in DSM. In 10.4 all runs fine.
THX fpr xour help!
Boot to debug mode by editing gnoboot-alpha boot menu, send your /.gnoboot/debug.log. Can you also provide a DSM screenshoot?
kernel /zImage debug
-
Updated to 10.5
Tried adding SSD cache
Still the same problem
SKW-SAN> tail -f /var/log/messages
Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth0 10.2.0.4 is Active
Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth1 10.3.0.4 is Active
Apr 7 20:58:37 SKW-SAN iss: synocomm_types.c:268 szName eth2 172.16.2.1 is Active
Apr 7 20:58:37 SKW-SAN kernel: [ 632.060284] EXT_INFO: INIT Extent-Pool
Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: flashcachehandler.cpp:238 Failed to create flashcache on /volume1 [0xEB00 servicec fg_internal_lib.c:104]
Apr 7 20:58:40 SKW-SAN kernel: [ 634.627242] md: md4: set sdf1 to auto_remap [0]
Apr 7 20:58:40 SKW-SAN kernel: [ 634.627243] md: md4: set sde1 to auto_remap [0]
Apr 7 20:58:40 SKW-SAN flashcachehandler.cgi: raid_remove.c:48 [info] clean RAID superblock of /dev/md4
Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sde1'
Apr 7 20:58:41 SKW-SAN flashcachehandler.cgi: raid_clean_superblock.c:87 [info] Clean RAID superblock on '/dev/sdf1'
Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac
Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000
Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add
Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000
Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.
Apr 7 20:58:46 SKW-SAN hotplugd: usb_get_device_id.c:56 failed get usb id Vendor=0000, ProdID=0000, SN=ffffffd0ffffffa2ffffffc3ffffffac
Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:990 failed get usb device id from usb config, DEVICE=/proc/bus/usb/000/000
Apr 7 20:58:46 SKW-SAN hotplugd: ##### ACTION:add
Apr 7 20:58:46 SKW-SAN hotplugd: DEVICE:/proc/bus/usb/000/000
Apr 7 20:58:46 SKW-SAN hotplugd: hotplugd.c:1406 Device is not in hotplugd supported list.
Haven't looked into it
.Hello,with 10.5 my PERC310 (8 SATA/SAS-Port Controller) doesnt work, the Volume is not showing up...with 10.4 it works great...PLS Help
I´ve created the Volume in the BIOS settings (4 SAS Drives / 1 Volume) so i dont have to create an Software-Raid in the DSM.
I'm using 9211-8i and it works (IR mode) for me on ESXi+vt-d. Are you using baremetal or vt-d? Doesn't show in DSM or doesn't detect the disk?
*For me i have always problem with Realtek network card 10DE:8136 rev=02 ( motherboard HP IPMEL-AE PEGATRON )
no IP ...?
addon cards
8086:1229 rev=02 OK
10DE:8169 rev=02 OK
I have a log with RR62x failed ...with no card in the computer
if i plug a RR622 card run , no problem in sata mode with only one HDD no RAID << fine ****
*** to change something or it really takes me a very detailed explanation **
** I know almost nothing linux !! ***
Pierre
Try to blacklist r8169 using rmmod GRUB option.
BTW, I have tried MagicPro PCTV Dual USB adaptor on my Xpenology box with 10.5 alpha, the dongle is not recognized by video station.Did you load the drivers in /etc/rc.local?
bump
, anything new? Or any idea what shoul I try?Try it again using 10.5, added more boot-up messages to trace your problem.
Hello, now I`m trying gnoboot-alpha-10.5 and v10.4 directly on hardware (MB GA-EP-DS4). Installed latest DSM 5.0-4458. I have some issuses with that configuration.1. When system boots up I have to wait about 5min to be available on the network, or unplug and plug in Lan cable. Motherboard using Realtek 8111C Chip.
2. Unable to install Update 1 no matter if trying automatic or manual update. System loads update the saying that the file is broken.
3. My DVB-T dongle not workig (works well on Trantor version and 4.3). This is Manta dvbtusb01 it is based on chipset It9135. As I see drivers are present in system, but Videostation not recognizes any tv card.
dmesg
[64440.720177] ------------[ cut here ]------------ [64440.720184] WARNING: at drivers/ata/libata-core.c:5348 ata_qc_issue+0x51/0x371() [64440.720186] Hardware name: EP45-DS4 [64440.720188] Modules linked in: it913x_fe(O) cifs udf isofs loop btusb(O) hidp(O) rfcomm(O) bluetooth(O) ip6t_LOG nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables xt_limit xt_state xt_tcpudp xt_multiport ipt_LOG nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack iptable_filter ip_tables x_tables usbhid hid usblp usb_storage uhci_hcd etxhci_hcd xhci_hcd ohci_hcd ehci_hcd bromolow_synobios(P) btrfs zlib_deflate hfsplus md4 hmac i2c_algo_bit fuse vfat fat chainiv cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand mperf processor cpufreq_stats freq_table dm_snapshot crc_itu_t quota_v2 quota_tree usbcore psnap p8022 llc usb_common zram(C) mpt2sas synoacl_ext4(P) synoacl_vfs(P) hptiop 3w_sas 3w_9xxx 3w_xxxx mv61xx(P) mvsas hpsa arcmsr aic7xxx aic79xx pm80xx(O) aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mptsas mptspi mptscsih mptbase scsi_transport_spi scsi_wait_scan sg ata_piix sata_uli sata_svw sata_qstor sata_inic162x sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pata_serverworks pata_oldpiix pata_sch pata_artop pata_atp867x pata_pdc202xx_old pata_pdc2027x pata_it821x pata_hpt3x2n pata_hpt37x pata_hpt366 pata_hpt3x3 pdc_adma pata_via pata_sil680 pata_rdc pata_ninja32 pata_netcell pata_marvell pata_jmicron pata_cmd64x pata_ali ata_generic iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4vf cxgb4 cxgb3 cxgb cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8169(O) r8168(O) 8139too 8139cp tg3(O) libphy b44(O) bnx2 mmc_core ssb(O) uio forcedeth ixgbe ixgb igb_new(O) ioatdma e1000e_new(O) e1000 e100 dca pcnet32 amd8111e tulip mdio mii container fan thermal_sys compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c crc32c eseqiv krng ansi_cprng cts rng aes_generic md5 cbc cryptomgr pcompress aead crypto_hash crypto_blkcipher crypto_wq crypto_algapi [last unloaded: it913x_fe] [64440.720342] Pid: 6118, comm: md0_raid1 Tainted: P C O 3.2.40 #8 [64440.720344] Call Trace: [64440.720348] [] ? ata_qc_issue+0x51/0x371 [64440.720351] [] ? ata_qc_issue+0x51/0x371 [64440.720355] [] ? warn_slowpath_common+0x78/0x8d [64440.720359] [] ? ata_qc_issue+0x51/0x371 [64440.720362] [] ? ata_qc_reinit+0x6d/0x7d [64440.720365] [] ? ata_ioc32+0x15/0x15 [64440.720368] [] ? ata_scsi_translate+0xda/0x10f [64440.720371] [] ? ata_scsi_queuecmd+0x3f/0x70 [64440.720376] [] ? scsi_dispatch_cmd+0x295/0x2fe [64440.720379] [] ? scsi_request_fn+0x4e7/0x516 [64440.720383] [] ? blk_queue_bio+0x294/0x2b8 [64440.720386] [] ? generic_make_request+0x91/0xd0 [64440.720389] [] ? submit_bio+0xa6/0xaf [64440.720393] [] ? md_super_write+0x58/0x83 [64440.720396] [] ? md_update_sb+0x2e6/0x455 [64440.720399] [] ? md_check_recovery+0x221/0x579 [64440.720403] [] ? raid1d+0x33/0x1298 [64440.720407] [] ? need_resched+0x1e/0x28 [64440.720410] [] ? __schedule+0x515/0x52f [64440.720414] [] ? __switch_to+0x142/0x27c [64440.720417] [] ? calc_global_load+0x191/0x191 [64440.720420] [] ? schedule_timeout+0x1e/0xb8 [64440.720424] [] ? default_spin_lock_flags+0x5/0x9 [64440.720427] [] ? _raw_spin_lock_irqsave+0x1e/0x27 [64440.720431] [] ? default_spin_lock_flags+0x5/0x9 [64440.720434] [] ? _raw_spin_lock_irqsave+0x1e/0x27 [64440.720437] [] ? md_thread+0xe4/0x102 [64440.720441] [] ? wake_up_bit+0x22/0x22 [64440.720444] [] ? md_trim_bio+0x105/0x105 [64440.720447] [] ? kthread+0x6a/0x72 [64440.720451] [] ? kernel_thread_helper+0x4/0x10 [64440.720454] [] ? kthread_bind+0x5c/0x5c [64440.720457] [] ? gs_change+0x13/0x13 [64440.720459] ---[ end trace 8e0b7a312ad2c2cc ]---
Any suggestions ?
Thanks
Try to blacklist r8169 using rmmod GRUB option. Did you load the DVB drivers in /etc/rc.local?
-
Thanks gnoboot for your 10.5 update.
I have updated to 10.5, but unlucky, I have a SATA HD connected on the original DVDROM sata connector, and that disk couldn't be found after the upgrade, I tried both vanilla and modified version, all failed, then I switched back to 10.4 and the disk was back.
I am using N40L.
Try to insmod pata_amd or pata_acpi.
-
Please expound custom hardware. What you're getting is the default hardware model if something weird happens.
-
Post your `dmesg` and `lspci -vvv`. You can also try gnoboot-alpha10.5-vanila-zImage.
-
How to change s/n 5.0 gnoboot on VMDK hdd(esxi) ?
Edit your GRUB configuration like the following:
kernel /zImage sn=XXXXXXXX
-
I've looked at your dmesg but there's no unknown messages. Did you dmesg after plugging your USB device?
-
Great! Are you still using those boot parameters I gave you?
Use pastebin or cryptobin then link it here.
-
@FrankDeRyder,
It's probably DSM app related issue, my boot image is just a kernel and initramfs. It has nothing to do with the apps.
For example, synozram script is broken because vendor is using PHP to calculate memory size which is missing from default installation.@Kybla,
Might be, try another backup method (e.g. rsync) or wait for beta release that will include a working iSCSI block backend.
-
Hello
I would like to upgrade my n54l.
It runs now under dsm 4.2 and I would like to install dsm 5.
I downloaded gnoboot 10.4, create a bootable usb key.
I plug the key on my n54l, switch it on, select gnoboot.me.
In synology assistant my Nas appear, but it is written "configuration lost".
When I right click on it the only choice is "install".
If I double click, a web page appear, adivisng me to backup my data ,and ask me where to find the firmware.
I didn't continue the process, because I don't know if this is normal.
From what I read, it would be written "migratable".
Can someone take a few minutes to explain me if it is normal, or if I did something wrong ?
Thanks a lot.no
Ps : sorry for my english, since it is not my mother langage.
Not sure, if you 4.2 would allow you to jump directly to 5.0. Take a backup first before you do anything as it should not be "configuration lost" if you have existing DSM installation.
-
Post your `dmesg` and `lspci -vvv` result. You have to give linuxtv.org link for your USB DVB-T2.
-
Try booting with the following options.
kernel /zImage acpi=off irqpoll debug rmmod=sg
-
Thanks for helping Gnoboot, much appreciated!
I will need a bit more hand holding for this, is there a way to send dmesg on the USB key I use for booting? Whatever I tried I could not mount it to write to it and I am on a physical server so I can't copy & paste.
Can you suggest what to look for or how to slow down the trace of messages I am getting before the screen stops at the point I have snapshot'ed it so that I can see a reference to a module?
I know this motherboard works with 4.3, but I failed to spot anyone with the board reporting success on the DSM 5 alpha
Serial console and boot to debug GRUB option, use putty to capture the text messages during boot up. Though, not sure if you MB supports serial connection.
-
Latest GNO with Intel NUC,
USB get's recognized as 2.0 still loads the xhci driver but uses the ehci driver ?
00:00.0 Class 0600: Device 8086:0154 (rev 09) Subsystem: Device 8086:2044 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:02.0 Class 0300: Device 8086:0166 (rev 09) Subsystem: Device 8086:2044 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=3] Expansion ROM at [disabled] Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a4] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- 00:16.0 Class 0780: Device 8086:1e3a (rev 04) Subsystem: Device 8086:2044 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f7c2c000 (64-bit, non-prefetchable) [size=1] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 00:19.0 Class 0200: Device 8086:1503 (rev 04) Subsystem: Device 8086:2044 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 41 Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f7c29000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f080 [size=2] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0100c Data: 4171 Capabilities: [e0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: e1000e 00:1a.0 Class 0c03: Device 8086:1e2d (rev 04) (prog-if 20) Subsystem: Device 8086:2044 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7c28000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1b.0 Class 0403: Device 8086:1e20 (rev 04) Subsystem: Device 8086:2044 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 4 Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0 ExtTag- RBE- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed- WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22 Status: NegoPending- InProgress- Capabilities: [130 v1] Root Complex Link Desc: PortNumber=0f ComponentID=00 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c000 00:1d.0 Class 0c03: Device 8086:1e26 (rev 04) (prog-if 20) Subsystem: Device 8086:2044 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7c27000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ehci_hcd 00:1f.0 Class 0601: Device 8086:1e56 (rev 04) Subsystem: Device 8086:2044 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:1f.2 Class 0106: Device 8086:1e03 (rev 04) (prog-if 01) Subsystem: Device 8086:2044 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 Interrupt: pin B routed to IRQ 40 Region 0: I/O ports at f0d0 [size=1] Region 1: I/O ports at f0c0 [size=1] Region 2: I/O ports at f0b0 [size=1] Region 3: I/O ports at f0a0 [size=1] Region 4: I/O ports at f060 [size=2] Region 5: Memory at f7c26000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0500c Data: 4151 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004 Capabilities: [b0] PCI Advanced Features AFCap: TP+ FLR+ AFCtrl: FLR- AFStatus: TP- Kernel driver in use: ahci 00:1f.3 Class 0c05: Device 8086:1e22 (rev 04) Subsystem: Device 8086:2044 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 5 Region 0: Memory at f7c25000 (64-bit, non-prefetchable) [size=11] Region 4: I/O ports at f040 [size=2]
Also allot of errors:
[ 1435.579735] dsmnotify.cgi[17761]: segfault at 0 ip 000000000804ccb8 sp 00000000fffeee00 error 6 [ 1459.540217] dsmnotify.cgi[19541]: segfault at 0 ip 000000000804ccb8 sp 00000000ffea6f00 error 6 [ 1466.538000] dsmnotify.cgi[20054]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcfe0a0 error 6 [ 1490.512849] dsmnotify.cgi[21703]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd13c40 error 6 [ 1498.510178] dsmnotify.cgi[22251]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9d3aa0 error 6 [ 1523.484098] dsmnotify.cgi[24128]: segfault at 0 ip 000000000804ccb8 sp 00000000ff83dde0 error 6 [ 1529.468447] dsmnotify.cgi[24560]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcfdea0 error 6 [ 1554.443824] dsmnotify.cgi[26298]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9a4e50 error 6 [ 1561.439088] dsmnotify.cgi[26767]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc00a50 error 6 [ 1586.404155] dsmnotify.cgi[28616]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9efef0 error 6
Then you either have to rmmod xhci or ehci in /etc/rc.local. Back read to know what's causing the segfaults.
-
if i delete the partition on the hard drive, the computer didn't get stuck.
It appends on the first reboot, after uploading the .pat file.
If i don't unplugged the drive before the motherboard check the Hard drive.
If the sata mode is in IDE mode, the computer start normally ... the problem seems to be with the AHCI mode ...
A quick google resulted to this. So i think this more of hardware bug/limitation.
-
How about using a Linux livecd with your disks connected, does it work?
I think this more of a hardware problem or something. It doesn't even load the GRUB and kernel. You can also try changing from AHCI to IDE mode, check if that works.
-
Kernel driver in use: r8168
There's already workaround posted in my blog.
You have to rmmod GRUB option r8169_new. Have you tried that already?kernel /zImage rmmod=r8169,r8169_new
-
Asking people to click your Ads is against ad companies terms and conditions.
Yeah, just read it the other day. That's why I've cleanup the comments section. This also the same to using a custom pat file which is against the vendor license terms.
-
screenshoot or dmesg would be helpful.
-
Capture the last module loaded before it panic, then try to rmmod that module.
kernel /zImage rmmod=pata_acpi,pata_amd
Can you send your `dmesg` and `lspci -vvv` result?
NEW DSM 5.1-5004 AVAILABLE !!
in DSM 5.2 and earlier (Legacy)
Posted
I've been there too... Some people doesn't really appreciate our effort for this community. All they want is free stuff and complain.