Jump to content
XPEnology Community

NoFate

Member
  • Posts

    174
  • Joined

  • Last visited

Everything posted by NoFate

  1. Well , bacause of the model off course, if you use a real 918 key on a virtual 918 system, no way that Synology is knowing that... If you use a real 918 key on a virtual 3515... I think Synology knows it .... Because probably the model number is also in the sn/Mac combination
  2. Ok, was quite sure that that was going to work, I wonder if the same truck also works on a 3615
  3. Tell us more details? Was the real sn/Mac combination from a completely different nas? Or was it from a real 918, so same model...
  4. Tell us more details? Was the real sn/Mac combination from a completely different nas? Or was it from a real 918, so same model...
  5. NoFate

    DSM 6.2 Loader

    No, I believe I choose Linux 64 bit or Linux 3.2 64 bit, esxi 6.7
  6. NoFate

    DSM 6.2 Loader

    i had also issues on esxi first install, booted up fine, then installed the .pat file , first wizard, rebooted after install, but ip was gone, wasnt reachable anymore on network i needed to change adapter in esxi from e1000 to e1000e , and then network was working again
  7. hi, have a question , i am running esxi 6.1 loader, synoboot is on ide0:0, os is on ide0:1 i have an hp gen 8 microserver, i have the 4 bay cougar in passtrough mode see screenshot attached for current config i HAD to select ide0:0 and ide0:1 , if i configured them on sata/scsi, i never saw all the disks from my 4 bay cougar sata controller, only like 1 or 2 of them instead of 4 so removed in 6.1 the sata+scsi adapter, and now i see all my 6 disks but after reading this new thread for new 6.2 loader, you need to configure it back on sata, so i think i will face my old problem back then? Seems ide controller is a nogo anymore, only Sata for synoboot any1 that can give me some tips? so i can still see ALL disks with the cougar sata controller in passthrough mode?
  8. Ok, see above, I managed to fix this in 6.1, but seems 6.2 doesn't like ide controller anymore.... Any advanced people here that can help me?
  9. I had the same issue on my microserver gen 8 , with lsi cougar in passthrough, seems xpeanology didn't t like multiple Sata controllers... I fixed it with attaching the synoboot to ide 0:0 ,and virtual disk for os , if you have that to ide 0:1... Then remove Sata and ssci, so there is only 1 Sata present, that's your passthrough ... Boot up,and I saw all my disks .. I 5.2 I didn't have to do this, no issue , only on 6.1... Not sure how I need to fix this on 6.2 though, since ide is not working there anymore
  10. NoFate

    DSM 6.2 Loader

    hi, have a question , i am running esxi 6.1 loader, synoboot is on ide0:0, os is on ide0:1 i have an hp gen 8 microserver, i have the 4 bay cougar in passtrough mode see screenshot attached for current config i HAD to select ide0:0 and ide0:1 , if i configured them on sata/scsi, i never saw all the disks from my 4 bay cougar sata controller, only like 1 or 2 of them instead of 4 so removed in 6.1 the sata+scsi adapter, and now i see all my 6 disks but after reading this new thread, i see you need to configure it back on sata, so i think i will face my old problem back then? any1 that can give me some tips? so i can still see ALL disks with the cougar sata controller in passthrough mode?
  11. Please search on this forum how to change the sn/Mac ,you need to change some files But then still,my original question, will the license work on a xpeonology with a real sn/Mac... Seems no one tried it yet
  12. You need to give an real Mac/sn to your xpeonology, did you do that already?
  13. yes, also tested that on esxi with the CMS SYNC, you can manage eveything from 1 synology , lifeview/settings/recordings , verry easy to setup
  14. well, its only like 50€ for 1 camera , its worth it we will see what new functions will come with the surveiiilance station, i still prefer to use it, since its a good system
  15. I don't need garanty Just wanted to know if someone already done this? Wanted to know if Synology checks product number on activation, if not , I am going to buy a license.... If Synology eventually is going to disactiave it later, then I loose some money
  16. hi, i have a real ds1512 , so an actual valid SN, not connected/registered on synology if i buy original surveillance licenses, can i i use it on the 3615xs ? if i change the SNl offcourse any1 already tried that ? thnx
  17. hi, i have a real ds1512 , so an actual valid SN, not connected/registered on synology if i buy original surveillance licenses, can i i use it on the 3615xs ? if i change the SNl offcourse any1 already tried that ? thnx
  18. ow, and btw, use thast HP custom builds for ESXI, older builds also had AHCI performance issues now i am running esxi 6.7 perfectly fine
  19. i always struggled with this issue, started copying on 100MB then after a min it dropped to 5-10 MB i never got this resolved in 5.2 or 6.1 , seems realated to compatibility in esxi vs cougar vs drivers si what i did, verry simple , i bought a microsd card 16 GB, installed ESXI on it, setup HP gen 8 in AHCI mode for sata controller bought an ASMEDIA sata controller card, asmedia is verry important, since marvel is not supported i boot from micro sd, my datastore is created on a small 2.5 ssd disk on that 2 port sata controller i create a virtual machine, create a virtual disk 100 GB for my synology ... install and run then i passthrough the cougar controller from the HP gen 8 , so i attach this card to my virtual host in stead of RDM mappings now my synology sees the 4 bays drives, and i also have S.M.A.R.T and offcourse full speed copiyn
  20. OMFG , resolved it attached the virtual disk and synoboot to IDE controller master/slave removed scsi and sata controller from the virtual machine, since not needed now there is actually one sata controller attached to the virtual machine in passtrhough mode booted synology; and BAM, all disks are there now i can start configuring
  21. i think it has todo with sataportmap ? in grub.cfg my config is al follow, on PCIE slot, i attahed a new sata controller , 2 port sata, with 1 SSD attached to it so my ESXi 6.7 boots from microSDslot on the SSD is my datastore, with 1 virtual disk so at this point, i see 2 disks in my xpenology, the synoboot disk and the virtual disk where DSM is installed on then i add the Cougart 6 port sata controller from my HP gen 8, 4 bay slot, this controller was set in AHCI mode, not raid by hp then i only see disk number from bay 3 and 4 how do i need to configure the sataportmap ? i tried 422 , but doesnt work? also tried 62 because, i have attached the virtual disk and synoboot to a sata controller in esxi, this stands for 2 then the cougart is passhtrough , is 6 port , so 62 ? but cant get the disks visible :'(
  22. so , created a new esxi virtual i boot from 6.1 synoboot.img loader created 1 extra virtual disk on my datastore, like 100GB for DSM soft , and apps installed DSM succesfully, all is working fine then i passthrough my sata ahci , with 4 bays , all western digital however, when i boot up synology, i only see 2 disks in passthrough, the ones in bay 3 and 4, disk number 3 and 4 so i think synology is confused about sata port mapping the virtual disk and synoboot are also disk 1 and disk 2 , so therefore i am not seeing the drives in bay 1 and 2 ? how can i fix this?? also tried this, from another topic, but doesnt help : set extra_args_3615='iommu=soft'
×
×
  • Create New...