Jump to content
XPEnology Community

|^HaDeS^|

Member
  • Posts

    27
  • Joined

  • Last visited

Everything posted by |^HaDeS^|

  1. No puedo. Me he tirado 2 semanas haciendo cosas, ya no se si seria capaz de replicar el proceso de reparacion. El de rotura seguro que si, pero el de reparacion....
  2. Arreglado Arranque en ubuntu, y con el comando mdadm, que es con lo synology gestiona sus raid, consegui sincronizar los discos. Luego con el comando btrfsck repare los datos. Ahora a copiar los datos y para la proxima MAS BACKUP
  3. Yes, it has so much power, technically. 6x20w(hd´s) + 65w(processor) = 185w full load The picopsu is 200w. The problem was the 220v~19v transformer that exploded. But the problem is finally solved. Startup in ubuntu, and with the command mdadm, which is with synology manages its raid, I managed to synchronize the disks. Then with the btrfsck command repair the data. Now to copy the data and for the next MORE BACKUP Thanks for the reply.
  4. hi, i come from here I have a PC for NAS with Xpenology. It´s six disks for RAID5. I decided to change the source for a PicoPsu the last sunday, which is smaller and less consumption, etc .... I changed it and when I boot 4 disks fail. I turn it off and look to see if I've let anything loose. I turn on and DSM say that the disk 2 is faulty. I turn off and look at the wires again. I turn on and it says to me again that the 2. I format it and I tell it to rebuild the RAID. During the rebuilding the new power source exploded, stopping everything: o: o. I leave the NAS as before, with the old power sourge, but now it does not give ip. I start by removing the disk 1 and if it enters DSM but it notifies me that disk 1 and 2 fail. I guess the system part of disk 1 is faulty and I try to reinstall the DSM without deleting the data, but every time I try to do the copy, i wait the 10 min restart and when it ends say fail system. Since Ubuntu boots perfectly although I do not have access to the data, but the partitions are seen. Can anyone help me or have I lost everything ?? I've been trying things since Sunday. I may have broken it more this images are with DSM working but without disk 1 the NAS : md0: md1: md2:
  5. Buenas, Tengo un pc haciendo de NAS. 6 Discos en RAID5. El otro dia decidi cambiarle la fuente por una PicoPsu, que es mas pequeña y menos consumo, etc.... Se la cambio y al arrancar me fallan 4 discos. Apago y miro a ver si es que me he dejado algo suelto. Enciendo y solo me falla el 2. Apago y vuelvo a mirar los cables. Enciendo y me vuelve a decir que el 2. Lo formateo y le digo que reconstruya el RAID. Durante la reconstruccion la fuente que habia puesto nueva explota, parandolo todo . Vuelvo a dejar el NAS como antes, pero ahora no me da ip. Arranco quitando el disco 1 y si que entra en DSM pero me avisa que falla el disco 1 y 2. Supongo que el sistema del disco 1 se ha ido a paseo e intento reinstalar el DSM sin borrar los datos, pero cada vez que lo intento hace la copia, los 10 min de reinicio y cuando termina da error. Desde Ubuntu arranca perfectamente aunque no tengo acceso a los datos, pero se ven las particiones. Alguien puede ayudarme o lo he perdido todo?? Llevo desde el Domingo intentado cosas. Es posible que lo haya roto mas Capturas del DSM funcionando pero sin el disco 1 esta es la estructura : md0: md1: md2:
  6. 258/5000 Phenix6600, as duck says, its serious that you did a new post with title "cross driver DSM6 skystar 2 express hd" for example. So that it does not mix with this one and by the way explain how you have done it, the order of the modules, the firmware etc. a greeting
  7. If you look at this previous post, the driver is valid for more than one model and brand, maybe changing the firmware file works, although I suppose I will have to add modules, but for testing ..... a greeting
  8. hi Manuelin, de kodimania?? In the folder that has DSM6 contains a DVB-C that has the satellite modules compiled, which is not if you have the firmware m88ds3103. I was used to my TBS 6920. Even though it will not work, try this to see that it is free, is what I did but with your firmware:D :
  9. I owe you a pair of superbock obrigado
  10. i solved the problem the correct order is: insmod /lib/modules/backports_dvb/dvb-core.ko insmod /lib/modules/backports_dvb/videobuf-core.ko insmod /lib/modules/backports_dvb/videobuf-dma-sg.ko insmod /lib/modules/backports_dvb/rc-core.ko insmod /lib/modules/backports_dvb/v4l2-compat-ioctl32.ko insmod /lib/modules/backports_dvb/videodev.ko insmod /lib/modules/backports_dvb/v4l2-common.ko insmod /lib/modules/backports_dvb/tveeprom.ko insmod /lib/modules/backports_dvb/videobuf-dvb.ko insmod /lib/modules/backports_dvb/btcx-risc.ko insmod /lib/modules/backports_dvb/cx24116.ko insmod /lib/modules/backports_dvb/cx2341x.ko insmod /lib/modules/backports_dvb/cx23885.ko card=14 dmesg: [ 29.816624] cx23885_dvb_register() allocating 1 frontend(s) [ 29.816629] cx23885[0]: cx23885 based dvb card [ 29.816913] DVB: registering new adapter (cx23885[0]) [ 29.816915] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118). .. [ 29.843758] TurboSight TBS 692x MAC= 00:22:AB:E0:1D:0F [ 29.843764] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 29.843768] cx23885[0]/0: found at 0000:01:00.0, rev: 2, irq: 18, latency: 0, mmio: 0xff400000 thank you JMRR if you come to almeria, spain, you have some beers o cup of wine free....but without google translator
  11. List of errors: [ 20.627212] cx23885: Unknown symbol videobuf_streamoff (err 0) [ 20.627229] cx23885: Unknown symbol v4l2_norm_to_name (err 0) [ 20.627258] cx23885: Unknown symbol videobuf_poll_stream (err 0) [ 20.627269] cx23885: Unknown symbol video_ioctl2 (err 0) [ 20.627282] cx23885: Unknown symbol videobuf_read_stop (err 0) [ 20.627318] cx23885: Unknown symbol ir_raw_event_handle (err 0) [ 20.627347] cx23885: Unknown symbol dvb_ca_en50221_init (err 0) [ 20.627380] cx23885: Unknown symbol cx2341x_ext_ctrls (err 0) [ 20.627409] cx23885: Unknown symbol videobuf_dma_free (err 0) [ 20.627440] cx23885: Unknown symbol ir_raw_event_store (err 0) [ 20.627458] cx23885: Unknown symbol videobuf_reqbufs (err 0) [ 20.627473] cx23885: Unknown symbol videobuf_waiton (err 0) [ 20.627484] cx23885: Unknown symbol v4l2_subdev_init (err 0) [ 20.627495] cx23885: Unknown symbol videobuf_dqbuf (err 0) [ 20.627508] cx23885: Unknown symbol videobuf_dvb_alloc_frontend (err 0) [ 20.627519] cx23885: Unknown symbol v4l2_i2c_subdev_addr (err 0) [ 20.627529] cx23885: Unknown symbol v4l2_device_register_subdev (err 0) [ 20.627541] cx23885: Unknown symbol cx2341x_ctrl_query (err 0) [ 20.627552] cx23885: Unknown symbol video_devdata (err 0) [ 20.627563] cx23885: Unknown symbol v4l_bound_align_image (err 0) [ 20.627575] cx23885: Unknown symbol v4l2_type_names (err 0) [ 20.627585] cx23885: Unknown symbol v4l2_device_unregister_subdev (err 0) [ 20.627595] cx23885: Unknown symbol v4l2_ctrl_next (err 0) [ 20.627609] cx23885: Unknown symbol btcx_riscmem_alloc (err 0) [ 20.627619] cx23885: Unknown symbol videobuf_dvb_get_frontend (err 0) [ 20.627631] cx23885: Unknown symbol tveeprom_read (err 0) [ 20.627641] cx23885: Unknown symbol videobuf_queue_sg_init (err 0) [ 20.627652] cx23885: Unknown symbol btcx_riscmem_free (err 0) [ 20.627662] cx23885: Unknown symbol v4l2_ctrl_query_menu (err 0) [ 20.627672] cx23885: Unknown symbol videobuf_dma_unmap (err 0) [ 20.627682] cx23885: Unknown symbol videobuf_read_stream (err 0) [ 20.627694] cx23885: Unknown symbol dvb_ca_en50221_release (err 0) [ 20.627706] cx23885: Unknown symbol rc_register_device (err 0) [ 20.627716] cx23885: Unknown symbol videobuf_querybuf (err 0) [ 20.627726] cx23885: Unknown symbol video_unregister_device (err 0) [ 20.627737] cx23885: Unknown symbol videobuf_qbuf (err 0) [ 20.627749] cx23885: Unknown symbol cx2341x_update (err 0) [ 20.627760] cx23885: Unknown symbol video_device_alloc (err 0) [ 20.627770] cx23885: Unknown symbol videobuf_read_one (err 0) [ 20.627781] cx23885: Unknown symbol rc_free_device (err 0) [ 20.627794] cx23885: Unknown symbol dvb_ca_en50221_frda_irq (err 0) [ 20.627805] cx23885: Unknown symbol cx2341x_ctrl_get_menu (err 0) [ 20.627815] cx23885: Unknown symbol v4l2_device_register (err 0) [ 20.627825] cx23885: Unknown symbol videobuf_dvb_unregister_bus (err 0) [ 20.627837] cx23885: Unknown symbol dvb_ca_en50221_camready_irq (err 0) [ 20.627848] cx23885: Unknown symbol rc_allocate_device (err 0) [ 20.627859] cx23885: Unknown symbol cx2341x_log_status (err 0) [ 20.627872] cx23885: Unknown symbol cx2341x_fill_defaults (err 0) [ 20.627882] cx23885: Unknown symbol videobuf_dvb_register_bus (err 0) [ 20.627893] cx23885: Unknown symbol videobuf_iolock (err 0) [ 20.627905] cx23885: Unknown symbol __video_register_device (err 0) [ 20.627915] cx23885: Unknown symbol videobuf_streamon (err 0) [ 20.627925] cx23885: Unknown symbol videobuf_queue_cancel (err 0) [ 20.627936] cx23885: Unknown symbol videobuf_dvb_dealloc_frontends (err 0) [ 20.627945] cx23885: Unknown symbol v4l2_i2c_tuner_addrs (err 0) [ 20.627956] cx23885: Unknown symbol v4l2_device_unregister (err 0) [ 20.627967] cx23885: Unknown symbol tveeprom_hauppauge_analog (err 0) [ 20.627977] cx23885: Unknown symbol video_device_release (err 0) [ 20.627987] cx23885: Unknown symbol v4l2_i2c_new_subdev (err 0) [ 20.627998] cx23885: Unknown symbol videobuf_mmap_mapper (err 0) [ 20.628038] cx23885: Unknown symbol cx2341x_mpeg_ctrls (err 0) [ 20.628051] cx23885: Unknown symbol rc_unregister_device (err 0) [ 20.628073] cx23885: Unknown symbol videobuf_to_dma (err 0) [ 20.628083] cx23885: Unknown symbol videobuf_mmap_free (err 0) JMRR, How do you find dependences? thank you
  12. Jejeje, i thinked this and i did the change, but the error list was bigger and i turned at first. how i did formatted the nas i am copying things. This night i reboot it and paste the ereors. Thanks
  13. hi, i´m in DSM6. I followed the same steps as before, but with your DSM6 drivers. 1º) Copy dvb-fe-cx24116.fw to /lib/firmware 2º) Copy this into /lib/modules/backports_dvb: dvb-core.ko videobuf-core.ko videobuf-dma-sg.ko rc-core.ko v4l2-compat-ioctl32.ko videodev.ko v4l2-common.ko tveeprom.ko videobuf-dvb.ko btcx-risc.ko cx2341x.ko cx23885.ko cx24116.ko 3º)I had to create the rc.local file. insmod /lib/modules/backports_dvb/dvb-core.ko insmod /lib/modules/backports_dvb/videobuf-core.ko insmod /lib/modules/backports_dvb/videobuf-dma-sg.ko insmod /lib/modules/backports_dvb/rc-core.ko insmod /lib/modules/backports_dvb/v4l2-compat-ioctl32.ko insmod /lib/modules/backports_dvb/videodev.ko insmod /lib/modules/backports_dvb/v4l2-common.ko insmod /lib/modules/backports_dvb/tveeprom.ko insmod /lib/modules/backports_dvb/videobuf-dvb.ko insmod /lib/modules/backports_dvb/btcx-risc.ko insmod /lib/modules/backports_dvb/cx2341x.ko insmod /lib/modules/backports_dvb/cx23885.ko card=14 insmod /lib/modules/backports_dvb/cx24116.ko 4º) chmod 755 /lib/modules/backports_dvb/*.ko 5º) Reboot Dmesg says this: [ 19.592379] TBS version 160405 [ 19.846469] Linux video capture interface: v2.00 [ 19.884842] loop: module loaded [ 20.023368] cx23885 driver version 0.0.3 loaded [ 20.023449] CORE cx23885[0]: subsystem: 0000:0000, board: TurboSight TBS 6920 [card=14,insmod option] [ 20.750324] cx23885_dvb_register() allocating 1 frontend(s) [ 20.750329] cx23885[0]: cx23885 based dvb card [ 20.750809] DVB: Unable to find symbol cx24116_attach() [ 20.750979] cx23885[0]: frontend initialization failed [ 20.751187] cx23885_dvb_register() dvb_register failed err = -22 [ 20.751386] cx23885_dev_setup() Failed to register dvb adapters on VID_B [ 20.751606] cx23885_dev_checkrevision() Hardware revision = 0xb0 [ 20.751611] cx23885[0]/0: found at 0000:01:00.0, rev: 2, irq: 18, latency: 0,mmio: 0xff200000 What happens to you that this can be ?? In tvheadend I do not have to do anything special, right? Just run the wizard and it will appear, right? thanks
  14. I think that he say that your drivers for DSM6 for dvb-c work for DVB-t or at least for tbs 6981
  15. Everything is as you have ordered: D I am backing up the data and formatting the nas and start again. Possibly have some permissions problem and so I do not let me modify the tvh etc .... I guess for the next weekend I will have everything in order (4x4tb = 4x24 hours formatted) + 48 hours passing data. Any web explaining for dummies how to compile the drivers for DSM6? Try cross compilation, but my linux level is "ls and mkdir" and I lost: D thank you
  16. hi JMRR dmesg say this now: [ 19.800078] TBS version 160405 [ 19.889534] Linux video capture interface: v2.00 [ 19.981852] cx23885 driver version 0.0.3 loaded [ 19.981950] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 19.981952] BUG: unable to handle kernel paging request at ffff88022536d1c8 [ 19.981954] IP: [] 0xffff88022536d1c7 [ 19.981962] PGD 48c9067 PUD 48cc067 PMD 80000002252001e3 [ 19.981965] Oops: 0011 [#1] SMP [ 19.981967] Modules linked in: cx23885(O+) cx2341x(O) btcx_risc(O) videobuf_dvb(O) tveeprom(O) v4l2_common(O) videodev(O) v4l2_compat_ioctl32(O) rc_core(O) videobuf_dma_sg(O) videobuf_core(O) dvb_core(O) hid_generic usbhid usblp usb_storage oxu210hp_hcd ath3k hidp rfcomm bluetooth hid bromolow_synobios(PO) btrfs synoacl_vfs(PO) zlib_deflate hfsplus md4 hmac mlx_compat(O) tn40xx(O) fuse vfat fat crc32c_intel aesni_intel glue_helper lrw gf128mul ablk_helper arc4 rng_core cpufreq_conservative cpufreq_powersave cpufreq_performance cpufreq_ondemand acpi_cpufreq mperf cpufreq_stats freq_table crc_itu_t quota_v2 quota_tree psnap p8022 llc sit tunnel4 ip_tunnel zram© r8152 asix ax88179_178a usbnet etxhci_hcd xhci_hcd ehci_pci ehci_hcd uhci_hcd ohci_hcd usbcore usb_common hptiop 3w_sas 3w_9xxx mvsas hpsa arcmsr pm80xx aic94xx aacraid megaraid_sas megaraid_mbox megaraid_mm mptsas mptspi mptscsih mptbase scsi_transport_spi sg sata_uli sata_svw sata_qstor sata_sis pata_sis stex sata_sx4 sata_promise sata_nv sata_via sata_sil pdc_adma pata_via iscsi_tcp libiscsi_tcp libiscsi enic qlge qlcnic qla3xxx netxen_nic mlx4_en mlx4_core cxgb4 cxgb3 cnic ipv6 bnx2x bna be2net sis900 sis190 jme atl1e(O) atl1c atl2(O) atl1(O) alx(O) sky2 skge via_velocity crc_ccitt via_rhine r8101 r8168 r8169 8139too 8139cp tg3 broadcom b44(O) bnx2 ssb(O) uio forcedeth i40e ixgbe ixgb igb ioatdma e1000e e1000 e100 dca pcnet32 amd8111e mdio mii compat(O) cryptd ecryptfs sha512_generic sha256_generic sha1_generic ecb aes_x86_64 authenc des_generic libcrc32c ansi_cprng cts md5 cbc [last unloaded: bromolow_synobios] [ 19.982046] CPU: 2 PID: 18662 Comm: insmod Tainted: P C O 3.10.35 #1 [ 19.982048] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./FM2A88X-ITX+, BIOS P2.50 11/11/2014 [ 19.982050] task: ffff88022466d740 ti: ffff8802143a4000 task.ti: ffff8802143a4000 [ 19.982051] RIP: 0010:[] [] 0xffff88022536d1c7 [ 19.982056] RSP: 0018:ffff8802143a7b90 EFLAGS: 00010246 [ 19.982057] RAX: ffffffff81364220 RBX: ffff880210d61130 RCX: 0000000000000020 [ 19.982059] RDX: ffff8802143a7ba0 RSI: 0000000000000040 RDI: ffff88022536d098 [ 19.982060] RBP: 0000000000000040 R08: 0000000000000000 R09: ffff88022536d1c8 [ 19.982061] R10: 0000000000000000 R11: dead000000100100 R12: 0000000000000040 [ 19.982062] R13: ffff88022536d000 R14: ffff88022536d098 R15: ffff88021422b340 [ 19.982064] FS: 00007f99dfb33740(0000) GS:ffff88022ed00000(0063) knlGS:00000000f77ebb40 [ 19.982065] CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b [ 19.982066] CR2: ffff88022536d1c8 CR3: 000000021412d000 CR4: 00000000000407e0 [ 19.982068] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 19.982069] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 19.982070] Stack: [ 19.982071] ffffffffa0c5f61b ffff880210d60000 0000000000000000 ffff880210d60008 [ 19.982074] ffff880210d61130 0000000000130140 0000000000000011 0000000000000000 [ 19.982076] ffffffffa0c71ddd ffff8802143a7c28 ffff880210d60ff8 0000000000000001 [ 19.982078] Call Trace: [ 19.982081] [] ? btcx_riscmem_alloc+0xfb/0x18c [btcx_risc] [ 19.982088] [] ? cx23885_risc_stopper+0x2d/0x80 [cx23885] [ 19.982095] [] ? cx23885_init_tsport+0x1af/0x290 [cx23885] [ 19.982101] [] ? cx23885_initdev+0xa99/0xe10 [cx23885] [ 19.982105] [] ? pci_device_probe+0x98/0xe0 [ 19.982108] [] ? driver_probe_device+0x68/0x220 [ 19.982110] [] ? __driver_attach+0x93/0xa0 [ 19.982112] [] ? driver_probe_device+0x220/0x220 [ 19.982115] [] ? bus_for_each_dev+0x4d/0x80 [ 19.982117] [] ? bus_add_driver+0xe5/0x230 [ 19.982121] [] ? 0xffffffffa0c8dfff [ 19.982123] [] ? driver_register+0x84/0x180 [ 19.982127] [] ? 0xffffffffa0c8dfff [ 19.982130] [] ? do_one_initcall+0x112/0x170 [ 19.982133] [] ? load_module+0x1784/0x1fc0 [ 19.982135] [] ? free_notes_attrs+0x60/0x60 [ 19.982138] [] ? map_vm_area+0x25/0x40 [ 19.982140] [] ? __vmalloc_node_range+0x117/0x1f0 [ 19.982142] [] ? SyS_init_module+0xb1/0xe0 [ 19.982145] [] ? cstar_dispatch+0x7/0x21 [ 19.982146] Code: 88 ff ff 20 42 36 81 ff ff ff ff 98 d0 36 25 02 88 ff ff ff ff ff ff 00 00 00 00 00 00 00 00 00 00 00 00 e0 ff ff ff 0f 00 00 00 d1 36 25 02 88 ff ff c8 d1 36 25 02 88 ff ff d0 46 36 81 ff [ 19.982165] RIP [] 0xffff88022536d1c7 [ 19.982169] RSP [ 19.982170] CR2: ffff88022536d1c8 [ 19.982172] ---[ end trace 9a2fee7e10225699 ]--- its ok??? tvheadend dont see the TBS and I do not know if I just need to configure it. For DSM 6 I would have to do cross compilation, right? Thank you very much.......I'm going to have to invite you to a coffee or beer ...: D
  17. The process is similar for DSM6???
  18. hi JMRR dmesg say this now: Nas> dmesg | grep cx23885 [ 22.006214] cx23885 driver version 0.0.3 loaded [ 22.006295] cx23885[0]: Board has no valid PCIe Subsystem ID and can't [ 22.006295] cx23885[0]: be autodetected. Pass card= insmod option [ 22.006295] cx23885[0]: to workaround that. Redirect complaints to the [ 22.006295] cx23885[0]: vendor of the TV card. Best regards, [ 22.006295] cx23885[0]: -- tux [ 22.006298] cx23885[0]: Here is a list of valid choices for the card= insmod option: [ 22.006299] cx23885[0]: card=0 -> UNKNOWN/GENERIC [ 22.006300] cx23885[0]: card=1 -> Hauppauge WinTV-HVR1800lp [ 22.006300] cx23885[0]: card=2 -> Hauppauge WinTV-HVR1800 [ 22.006301] cx23885[0]: card=3 -> Hauppauge WinTV-HVR1250 [ 22.006302] cx23885[0]: card=4 -> DViCO FusionHDTV5 Express [ 22.006303] cx23885[0]: card=5 -> Hauppauge WinTV-HVR1500Q [ 22.006304] cx23885[0]: card=6 -> Hauppauge WinTV-HVR1500 [ 22.006305] cx23885[0]: card=7 -> Hauppauge WinTV-HVR1200 [ 22.006305] cx23885[0]: card=8 -> Hauppauge WinTV-HVR1700 [ 22.006306] cx23885[0]: card=9 -> Hauppauge WinTV-HVR1400 [ 22.006307] cx23885[0]: card=10 -> DViCO FusionHDTV7 Dual Express [ 22.006308] cx23885[0]: card=11 -> DViCO FusionHDTV DVB-T Dual Express [ 22.006309] cx23885[0]: card=12 -> Leadtek Winfast PxDVR3200 H [ 22.006310] cx23885[0]: card=13 -> Compro VideoMate E650F [ 22.006311] cx23885[0]: card=14 -> TurboSight TBS 6920 [ 22.006311] cx23885[0]: card=15 -> TeVii S470 [ 22.006312] cx23885[0]: card=16 -> DVBWorld DVB-S2 2005 [ 22.006313] cx23885[0]: card=17 -> NetUP Dual DVB-S2 CI [ 22.006314] cx23885[0]: card=18 -> Hauppauge WinTV-HVR1270 [ 22.006315] cx23885[0]: card=19 -> Hauppauge WinTV-HVR1275 [ 22.006315] cx23885[0]: card=20 -> Hauppauge WinTV-HVR1255 [ 22.006316] cx23885[0]: card=21 -> Hauppauge WinTV-HVR1210 [ 22.006317] cx23885[0]: card=22 -> Mygica X8506 DMB-TH [ 22.006318] cx23885[0]: card=23 -> Magic-Pro ProHDTV Extreme 2 [ 22.006319] cx23885[0]: card=24 -> Hauppauge WinTV-HVR1850 [ 22.006320] cx23885[0]: card=25 -> Compro VideoMate E800 [ 22.006321] cx23885[0]: card=26 -> Hauppauge WinTV-HVR1290 [ 22.006321] cx23885[0]: card=27 -> Mygica X8558 PRO DMB-TH [ 22.006322] cx23885[0]: card=28 -> LEADTEK WinFast PxTV1200 [ 22.006323] cx23885[0]: card=29 -> GoTView X5 3D Hybrid [ 22.006324] cx23885[0]: card=30 -> NetUP Dual DVB-T/C-CI RF [ 22.006325] cx23885[0]: card=31 -> Leadtek Winfast PxDVR3200 H XC4000 [ 22.006325] cx23885[0]: card=32 -> TurboSight TBS 6980 [ 22.006326] cx23885[0]: card=33 -> TurboSight TBS 6981 [ 22.006327] cx23885[0]: card=34 -> TurboSight TBS 6921 [ 22.006328] cx23885[0]: card=35 -> TurboSight TBS 6925C [ 22.006330] cx23885[0]: can't get MMIO memory @ 0x0 [ 22.006331] CORE cx23885[0] No more PCIe resources for subsystem: 0000:0000 [ 22.006335] cx23885: probe of 0000:01:00.0 failed with error -22 i have a tbs 6920 Now, i´m dont going to touch the NAS more. i have a problem, when i connect by console with the nas, the volume1 fail, i dont know if the problem is a permissions or other thing. i´m going to backup the volume and format, and when i have the nas ok I'll try again if the problem was some faulty system folder or some poltergeist. thank you very much and the next week i hope i can to have the nas ok
  19. i have read your post again and i see that "DONT COPY TO" but i did..... ¿it's very important?
  20. i have read your post again and i see that "DONT COPY TO" but i did..... ¿it's very important?
  21. hi JMRR, the log say this: [ 18.980045] TBS version 160405 [ 19.040277] cx2341x: Unknown symbol v4l2_ctrl_grab (err 0) [ 19.040292] cx2341x: Unknown symbol v4l2_ctrl_query_fill (err 0) [ 19.040305] cx2341x: Unknown symbol v4l2_ctrl_handler_setup (err 0) [ 19.040317] cx2341x: Unknown symbol v4l2_ctrl_new_custom (err 0) [ 19.040330] cx2341x: Unknown symbol v4l2_ctrl_check (err 0) [ 19.040345] cx2341x: Unknown symbol v4l2_ctrl_new_std_menu (err 0) [ 19.040357] cx2341x: Unknown symbol v4l2_ctrl_get_menu (err 0) [ 19.040370] cx2341x: Unknown symbol v4l2_ctrl_activate (err 0) [ 19.040382] cx2341x: Unknown symbol v4l2_ctrl_handler_init (err 0) [ 19.040394] cx2341x: Unknown symbol v4l2_ctrl_new_std (err 0) [ 19.040406] cx2341x: Unknown symbol v4l2_ctrl_g_ctrl (err 0) [ 19.040418] cx2341x: Unknown symbol v4l2_ctrl_handler_free (err 0) [ 19.040431] cx2341x: Unknown symbol v4l2_ctrl_cluster (err 0) [ 19.061086] v4l2_common: Unknown symbol v4l2_subdev_init (err 0) [ 19.061099] v4l2_common: Unknown symbol v4l2_device_register_subdev (err 0) [ 19.061114] v4l2_common: Unknown symbol v4l2_ctrl_get_menu (err 0) [ 19.061125] v4l2_common: Unknown symbol v4l2_ctrl_fill (err 0) [ 19.120506] videodev: Unknown symbol v4l2_compat_ioctl32 (err 0) [ 19.215349] cx23885: Unknown symbol v4l2_norm_to_name (err 0) [ 19.215362] cx23885: Unknown symbol video_ioctl2 (err 0) [ 19.215390] cx23885: Unknown symbol cx2341x_ext_ctrls (err 0) [ 19.215412] cx23885: Unknown symbol v4l2_subdev_init (err 0) [ 19.215427] cx23885: Unknown symbol v4l2_i2c_subdev_addr (err 0) [ 19.215437] cx23885: Unknown symbol v4l2_device_register_subdev (err 0) [ 19.215447] cx23885: Unknown symbol cx2341x_ctrl_query (err 0) [ 19.215457] cx23885: Unknown symbol video_devdata (err 0) [ 19.215467] cx23885: Unknown symbol v4l_bound_align_image (err 0) [ 19.215479] cx23885: Unknown symbol v4l2_type_names (err 0) [ 19.215488] cx23885: Unknown symbol v4l2_device_unregister_subdev (err 0) [ 19.215498] cx23885: Unknown symbol v4l2_ctrl_next (err 0) [ 19.215513] cx23885: Unknown symbol v4l2_ctrl_query_menu (err 0) [ 19.215529] cx23885: Unknown symbol video_unregister_device (err 0) [ 19.215542] cx23885: Unknown symbol cx2341x_update (err 0) [ 19.215552] cx23885: Unknown symbol video_device_alloc (err 0) [ 19.215566] cx23885: Unknown symbol cx2341x_ctrl_get_menu (err 0) [ 19.215576] cx23885: Unknown symbol v4l2_device_register (err 0) [ 19.215590] cx23885: Unknown symbol cx2341x_log_status (err 0) [ 19.215601] cx23885: Unknown symbol cx2341x_fill_defaults (err 0) [ 19.215614] cx23885: Unknown symbol __video_register_device (err 0) [ 19.215626] cx23885: Unknown symbol v4l2_i2c_tuner_addrs (err 0) [ 19.215636] cx23885: Unknown symbol v4l2_device_unregister (err 0) [ 19.215646] cx23885: Unknown symbol video_device_release (err 0) [ 19.215656] cx23885: Unknown symbol v4l2_i2c_new_subdev (err 0) [ 19.215668] cx23885: Unknown symbol cx2341x_mpeg_ctrls (err 0) Last year I tried to install it, but I could not do cross compilation. I do not know if I put some file where it should not. Thank you
  22. Thanks JMRR for the reply. I'll try this tomorrow
  23. Hi JMRR, i have a sat card TBS 6920... this drivers are ok for me?? i have reading the first post but i dont know where is the wiki page for i look for the modules for my card. Can you help me? What do I have to do to make your drivers good for DSM 5.2-5644 Update 3 ?? i see that you have a version for DSM 6 .... what version is supported?? it's very possible that i will formatted my xpenology for other things kind regards P.D: google translator
×
×
  • Create New...