Jump to content
XPEnology Community

cyberdott

Member
 View Profile  See their activity

  • Posts

    25

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Posts posted by cyberdott

    Neuinstallation DSM 6.1

    in GERMAN

    Posted

    Also ich nutze den Loader nun schon seit mehr als einer Woche auf einem frisch aufgesetzten Microserver gen8 mit 4x3TB WD Red mit dem aktuellsten Update. Auch phpvirtualbox funktioniert mit Appache 2.4/PHP7 fehlerfrei. Installiert habe ich ihn als 3615xs. Mir hat sich nicht erschlossen, was es für vorteile bringt, wenn ich ihn als 3617xs installiert hätte. Bisher habe ich auch noch nicht gehört, dass dies mit diesem loader funktioniert.

    N54L esata port on nanoboot 5.0.3.1 4493 U3

    in Archives

    Posted

    Hi there,

     

    I'm now switched from gnoboot to nanoboot and went so far quite well:-) The only thing I did not manage is my esata-port. This worked most recently with gnoboot 10.4. Under 10.5 it no longer worked. Unfortunately, now even with nanobott :sad:

     

    Her is my config:

     

    n54l with modified bios (latest version)

    2 hard drives

    Perc H310 (cross flash to LSI 9211-8i) as HBA / IT mode with 4 hard drives

     

    So I have currently 6 hard drives and 2 empty bays = 8 bays

    I do not use the ODD-port

    The esata port is to be used as a backup-volume, currently a hard drive is connected but not shown up as internal or external drive...

     

    edit the Syninfo has brought nothing except thar harddrives disappear from the LSI HBA ...

     

    Can any one help me? What do I have to configure where that my esata can be used as an external connection? Thank you so much!

    XPEnology gnoBoot

    in DSM 5.2 and earlier (Legacy)

    Posted

    Still no luck with my PERC H310 on 10.5... But i need 10.5 for Multimedia-Support :???: And I Need my Backup-Volume :cry:

    So maybe It could also be helpfull to crossflash to an LSI 9211-8i firmware!? Someone else here with a n54l/perc h310 baremetal config?

    I have both perc h310 and n54l in baremetal under gnoboot 10.5. But they are - two different baremetal xpenologies. :smile:

     

    Seriously speaking I do use h310 reflashed to 8211-8i/IT. Reflash procedure was rather complex. I had to consecutively flash it to latest dell's hba fw, then to 8211/IR and only third was 8211/IT. I used three different tool-chaines (dell's one, official lsi's and lsiutil correspondingly for those three stages). Also I used two different mobos (one with dos environment and other with efi-shell). And also had to cover two pins on pci-e.

     

    So I do not know if you can do it inside n54l. But you can try. As for me - I decided not to buy H310 adapters any more, but only original lsi 9211 (or 9240) as I did previously for two other hardware setups. As the little price difference do not excuse the complexity of making it functional.

     

    So Crossflash works inside N54L :smile: Actually P18 is the actually Firmware of my new branded LSI 9211-8i :smile:

    But new Prob :sad: Now the esata-Port is detected as Internal Port and no longer as esata...and also the Drive-Ordering is not correct:

     

    Disks.png

     

    Actually Config

    esataportcfg=0x30

    internalportcfg=0xfff

    usbportcfg=0x1FC0

     

    Disk 1 + 2 is from the internal Bay, 3 + 4 empty Slot of the Internal Bay

    5-7 ?

    Port 8 Is from the LSI (External ODD Tray-Bay)

    Port 9 E-Sata

    Port 10-12 from the LSI (External ODD Tray-Bay)

    Port 9 should be estata and not internal...

    How cann I change This? MaxDisk=12 ?

     

    4 from internal Bay, Port 1-4

    8 from LSI, Port 5-12)

    2 ESATA (1 odd + 1 real esata)

     

    THX!

    XPEnology gnoBoot

    in DSM 5.2 and earlier (Legacy)

    Posted · Edited by Guest

    Did you try manually reloading mpt2sas driver after booting up DSM?

     

    gnoboot> rmmod mpt2sas
gnoboot> insmod /lib/modules/mpt2sas.ko && dmesg | tail -n 50
or
gnoboot> insmod /lib/modules/mpt2sas.ko missing_delay=1000 && dmesg | tail -n 50

     

    And post the result of 2nd command. :wink:

     

    No but doesnt work also...Here is the Output:

     

    CyberDisk> rmmod mpt2sas
CyberDisk> insmod /lib/modules/mpt2sas.ko && dmesg | tail -n 50
[   37.555625] ata1: EH complete
[   37.556591] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.643176] usbcore: registered new interface driver dvb_usb_nova_t_usb2
[   37.695116] HDHomeRun: Begin init, version 0.0.15
[   37.711525] HDHomeRun: Waiting for userspace to connect
[   37.727298] HDHomeRun: End init
[   39.180914] EXT4-fs (sdu1): mounted filesystem without journal. Opts: nodelalloc,synoacl,data=ordered,oldalloc
[   39.682045] eth0: no IPv6 routers present
[   40.531764] init: synoindexd main process (23002) killed by USR2 signal
[   40.546852] init: synoindexd main process ended, respawning
[   44.487049] loop: module loaded
[   45.390210] dsmnotify.cgi[24493]: segfault at 0 ip 000000000804ccb8 sp 00000000ffaa35f0 error 6
[   46.556219] init: synoindexd main process (23280) killed by HUP signal
[   46.571046] init: synoindexd main process ended, respawning
[   46.615573] init: synomkthumbd main process (21838) killed by HUP signal
[   46.631786] init: synomkthumbd main process ended, respawning
[   46.681098] init: synomkflvd main process (21827) killed by HUP signal
[   46.696527] init: synomkflvd main process ended, respawning
[   47.031554] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[   48.186136] init: synoindexd main process (24762) killed by HUP signal
[   48.200898] init: synoindexd main process ended, respawning
[   48.240284] init: synomkthumbd main process (24871) killed by HUP signal
[   48.255228] init: synomkthumbd main process ended, respawning
[   48.300927] init: synomkflvd main process (24880) killed by HUP signal
[   48.314912] init: synomkflvd main process ended, respawning
[   49.276112] init: synoindexd main process (25248) killed by HUP signal
[   49.289759] init: synoindexd main process ended, respawning
[   49.327884] init: synomkthumbd main process (25268) killed by HUP signal
[   49.341743] init: synomkthumbd main process ended, respawning
[   49.386283] init: synomkflvd main process (25280) killed by HUP signal
[   49.399369] init: synomkflvd main process ended, respawning
[   66.954905] dm request get [md2], push down wakeup no work
[   66.967637] wake up [sda5]
[   66.980073] wake up [sdb5]
[   66.987725] Sync page end [sda]
[   67.012371] Sync page end [sdb]
[   69.819634] dsmnotify.cgi[29539]: segfault at 0 ip 000000000804ccb8 sp 00000000fffd1d00 error 6
[   69.969304] dsmnotify.cgi[29541]: segfault at 0 ip 000000000804ccb8 sp 00000000ff85c2d0 error 6
[   74.189290] synobios_ioctl: SYNOIO_RTC_TIME_WRITE
[   74.201471] (0h, 10) (1h, 5) (2h, 12) (3h, 4) (4h, a) (5h, 3) (6h, 72)
[   76.034895] dsmnotify.cgi[29646]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbbf800 error 6
[   77.153924] dsmnotify.cgi[29651]: segfault at 0 ip 000000000804ccb8 sp 00000000ff81ae70 error 6
[  100.793338] dsmnotify.cgi[29821]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdf4750 error 6
[  108.260572] dsmnotify.cgi[29909]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9a8660 error 6
[  116.138046] storagehandler.[29935]: segfault at 0 ip 000000000809e298 sp 00000000ffdf3210 error 6
[  117.115037] storagehandler.[31104]: segfault at 0 ip 000000000809e298 sp 00000000ff8b64f0 error 6
[  128.235820] storagehandler.[1241]: segfault at 0 ip 000000000809e298 sp 00000000ff948bc0 error 6
[  130.674121] mpt2sas version 13.100.00.00 unloading
[  131.414394] dsmnotify.cgi[2626]: segfault at 0 ip 000000000804ccb8 sp 00000000ffeb57d0 error 6
[  138.930116] mpt2sas version 13.100.00.00 loaded
CyberDisk> mount
/dev/root on / type ext4 (defaults)
none on /dev/pts type devpts (gid=4,mode=620)
/sys on /sys type sysfs (0)
/tmp on /tmp type tmpfs (0)
/proc/bus/usb on /proc/bus/usb type usbfs (0)
/dev/vg1000/lv on /volume1 type ext4 (usrjquota=aquota.user,grpjquota=aquota.gro
up,jqfmt=vfsv0,synoacl)
none on /proc/fs/nfsd type nfsd (0)
/volume1/@optware on /opt type bind (bind)
/dev/sdu1 on /volumeUSB1/usbshare type ext4 (nodelalloc,synoacl)
CyberDisk>

     

    Output from 2nd Command:

     

    CyberDisk> rmmod mpt2sas
CyberDisk> insmod /lib/modules/mpt2sas.ko missing_delay=1000 && dmesg | tail -n50
[  161.969731] dsmnotify.cgi[8142]: segfault at 0 ip 000000000804ccb8 sp 00000000ffec7fe0 error 6
[  170.636243] dsmnotify.cgi[8982]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbb5210 error 6
[  173.648209] storagehandler.[8986]: segfault at 0 ip 000000000809e298 sp 00000000ff8c27b0 error 6
[  184.723040] storagehandler.[10902]: segfault at 0 ip 000000000809e298 sp 00000000ffe97920 error 6
[  193.089445] dsmnotify.cgi[12778]: segfault at 0 ip 000000000804ccb8 sp 00000000fff52040 error 6
[  195.941509] storagehandler.[12788]: segfault at 0 ip 000000000809e298 sp 00000000ffe9d590 error 6
[  201.942890] dsmnotify.cgi[14685]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe02e00 error 6
[  207.034950] storagehandler.[14717]: segfault at 0 ip 000000000809e298 sp 00000000fff7b310 error 6
[  218.364656] storagehandler.[16620]: segfault at 0 ip 000000000809e298 sp 00000000ffc694b0 error 6
[  223.590774] dsmnotify.cgi[18545]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd546c0 error 6
[  229.967952] storagehandler.[18579]: segfault at 0 ip 000000000809e298 sp 00000000ffe7e410 error 6
[  233.156291] dsmnotify.cgi[20004]: segfault at 0 ip 000000000804ccb8 sp 00000000ffae2cd0 error 6
[  241.047060] storagehandler.[20531]: segfault at 0 ip 000000000809e298 sp 00000000ff89dde0 error 6
[  252.137404] storagehandler.[22461]: segfault at 0 ip 000000000809e298 sp 00000000fff7d650 error 6
[  254.329469] dsmnotify.cgi[23802]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9cc310 error 6
[  263.431710] storagehandler.[24392]: segfault at 0 ip 000000000809e298 sp 00000000ff9e9660 error 6
[  264.404245] dsmnotify.cgi[25673]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd0e880 error 6
[  274.570618] storagehandler.[26352]: segfault at 0 ip 000000000809e298 sp 00000000ff823510 error 6
[  285.163223] dsmnotify.cgi[28300]: segfault at 0 ip 000000000804ccb8 sp 00000000ffe79900 error 6
[  285.906033] storagehandler.[28301]: segfault at 0 ip 000000000809e298 sp 00000000ff962be0 error 6
[  295.670636] dsmnotify.cgi[30302]: segfault at 0 ip 000000000804ccb8 sp 00000000ffdd3520 error 6
[  297.585090] storagehandler.[30304]: segfault at 0 ip 000000000809e298 sp 00000000ff878700 error 6
[  308.711157] storagehandler.[32193]: segfault at 0 ip 000000000809e298 sp 00000000ffd7cdf0 error 6
[  315.965049] dsmnotify.cgi[1617]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcbdc90 error 6
[  319.831486] storagehandler.[1643]: segfault at 0 ip 000000000809e298 sp 00000000ffd928d0 error 6
[  326.940640] dsmnotify.cgi[3536]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb07cb0 error 6
[  332.436420] storagehandler.[3556]: segfault at 0 ip 000000000809e298 sp 00000000ff858320 error 6
[  344.120451] storagehandler.[5462]: segfault at 0 ip 000000000809e298 sp 00000000ffc033c0 error 6
[  346.281777] dsmnotify.cgi[6850]: segfault at 0 ip 000000000804ccb8 sp 00000000fff50240 error 6
[  356.481092] storagehandler.[7467]: segfault at 0 ip 000000000809e298 sp 00000000ffa04920 error 6
[  358.211447] dsmnotify.cgi[8756]: segfault at 0 ip 000000000804ccb8 sp 00000000ffa2f750 error 6
[  367.587217] storagehandler.[9386]: segfault at 0 ip 000000000809e298 sp 00000000ffc72d20 error 6
[  376.989722] dsmnotify.cgi[11258]: segfault at 0 ip 000000000804ccb8 sp 00000000ffbb0860 error 6
[  379.404449] storagehandler.[11261]: segfault at 0 ip 000000000809e298 sp 00000000ffe31080 error 6
[  389.423992] dsmnotify.cgi[13180]: segfault at 0 ip 000000000804ccb8 sp 00000000ffab4110 error 6
[  390.531296] storagehandler.[13182]: segfault at 0 ip 000000000809e298 sp 00000000ff809580 error 6
[  401.852918] storagehandler.[15095]: segfault at 0 ip 000000000809e298 sp 00000000fff95f20 error 6
[  407.105192] dsmnotify.cgi[17017]: segfault at 0 ip 000000000804ccb8 sp 00000000ff8da910 error 6
[  413.262676] storagehandler.[17074]: segfault at 0 ip 000000000809e298 sp 00000000fff9a320 error 6
[  420.705384] dsmnotify.cgi[18989]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9eda80 error 6
[  424.362638] storagehandler.[19001]: segfault at 0 ip 000000000809e298 sp 00000000ffbdf800 error 6
[  435.456894] storagehandler.[20905]: segfault at 0 ip 000000000809e298 sp 00000000ffccf270 error 6
[  437.710342] dsmnotify.cgi[22252]: segfault at 0 ip 000000000804ccb8 sp 00000000ffb34bf0 error 6
[  446.748137] storagehandler.[22841]: segfault at 0 ip 000000000809e298 sp 00000000ffd01010 error 6
[  451.956945] dsmnotify.cgi[24785]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc323d0 error 6
[  458.149735] storagehandler.[24824]: segfault at 0 ip 000000000809e298 sp 00000000ff8622c0 error 6
[  462.546053] mpt2sas version 13.100.00.00 unloading
[  468.494519] dsmnotify.cgi[26762]: segfault at 0 ip 000000000804ccb8 sp 00000000ff85ab60 error 6
[  469.278760] storagehandler.[26763]: segfault at 0 ip 000000000809e298 sp 00000000ffa42b80 error 6
[  476.164348] mpt2sas version 13.100.00.00 loaded
CyberDisk>
CyberDisk> mount
/dev/root on / type ext4 (defaults)
none on /dev/pts type devpts (gid=4,mode=620)
/sys on /sys type sysfs (0)
/tmp on /tmp type tmpfs (0)
/proc/bus/usb on /proc/bus/usb type usbfs (0)
/dev/vg1000/lv on /volume1 type ext4 (usrjquota=aquota.user,grpjquota=aquota.gro
up,jqfmt=vfsv0,synoacl)
none on /proc/fs/nfsd type nfsd (0)
/volume1/@optware on /opt type bind (bind)
/dev/sdu1 on /volumeUSB1/usbshare type ext4 (nodelalloc,synoacl)
CyberDisk>

     

    Unfortunately that did not work also. Hope you have a few more ideas :smile:

     

    **Update**

     

    Maybee i find it in the log. The Driver pata_atiixp is not loading. In 10_4 the followings line are in the Debug log:

     

    [    9.719919] scsi4 : pata_atiixp
[    9.726470] scsi5 : pata_atiixp
[    9.730600] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    9.734748] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[    9.893428] ata5.00: ATA-8: VB0250EAVER, HPG9, max UDMA/100
[    9.897910] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    9.903037] ata5.00: limited to UDMA/33 due to 40-wire cable
[    9.914434] ata5.00: configured for UDMA/33
[    9.921341] scsi 4:0:0:0: Direct-Access     ATA      VB0250EAVER              HPG9 PQ: 0 ANSI: 5
[    9.934522] syno_disk_type_get: disk driver 'pata_atiixp'
[    9.935199] syno_disk_type_get: SATA syno_port_type 1
[    9.949450] sd_probe: Got SATA dev_prefix (sd), index (4), disk_name (), disk_len (20)
[    9.966513] sd 4:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    9.986160] sd 4:0:0:0: [sde] Write Protect is off
[    9.996842] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
[   10.007963] sd 4:0:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   10.037812]  sde: sde1
[   10.050269] sd 4:0:0:0: [sde] Attached SCSI disk
[   10.315020] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[   10.483632] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   10.498291] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   10.506497] sd 4:0:0:0: Attached scsi generic sg2 type 0

     

    This lines i cant find in the 10_5 log. I know that this is the driver for the intgerated SATA-Controller of my n54l but this may prevent to load the Driver for thr SAS-HBA PERC 310 correctly!?

    XPEnology gnoBoot

    in DSM 5.2 and earlier (Legacy)

    Posted

    [quote name='"gnoboot

    Put the following lines in your /boot/grub/menu_alpha.lst

     

    kernel /zImage rmmod=ata_piix,r8169,r8169_new

     

     

    Sorry but it is still not working for me. Again ive attached the Debug log.

     

    10_5 ( not working)

    [ 10.433168] sd_probe: Got UNKNOWN dev_prefix (sd)' date=' index (4), disk_name [b'](sde)[/b], disk_len (20)

    10_4 (working)

    [ 11.305137] sd_probe: Got UNKNOWN dev_prefix (sd), index (6), disk_name (sdg), disk_len (20)

     

    The good News is that my cynergy t2 is working now :smile:

     

    Her some Screens:

    10_4

    10_4_1.png10_4_2.png

    10_5

    10_5_1.png10_5_2.png

    debug10_5_v2.zip

    XPEnology gnoBoot

    in DSM 5.2 and earlier (Legacy)

    Posted

    Hello,

     

    I´m using it as baremetal. I don´t know in which Mode the Adapter is running. I diddnt switch anything so it runs unmodifeyd. The Volume was not shown in DSM. In 10.4 all runs fine.

     

    THX fpr xour help!

     

    Boot to debug mode by editing gnoboot-alpha boot menu, send your /.gnoboot/debug.log. Can you also provide a DSM screenshoot?

     

    kernel /zImage debug

     

    Here it is. THX again!

    debug10_4_5.zip

    XPEnology gnoBoot

    in DSM 5.2 and earlier (Legacy)

    Posted

    DEBUG from 10.4 or 10.5?

     

    Here some DATA from MEGACLI:

     

    Product Name : PERC H310 Adapter

    Serial No : 2BG09XX

    FW Package Build: 20.10.2-0002

     

    BIOS Version : 4.29.00_4.12.05.00_0x05110000

    Preboot CLI Version: 03.02-015:#%00008

    Ctrl-R Version : 3.00-0020

    NVDATA Version : 3.09.03-0038

    FW Version : 2.120.14-1504

    Boot Block Version : 2.02.00.00-0001

     

    Virtual Drives : 1

    Degraded : 0

    Offline : 0

    Physical Devices : 4

    Disks : 4

    Critical Disks : 0

    Failed Disks : 0

    XPEnology gnoBoot

    in DSM 5.2 and earlier (Legacy)

    Posted

    Hello,

     

    with 10.5 my PERC310 (8 SATA/SAS-Port Controller) doesnt work, the Volume is not showing up...with 10.4 it works great...PLS Help :smile:

    I´ve created the Volume in the BIOS settings (4 SAS Drives / 1 Volume) so i dont have to create an Software-Raid in the DSM.

    Drivers requests for DSM 5.2

    in DSM 5.2 and earlier (Legacy)

    Posted

    Hello :smile:

    I Use the Dell Perc H310 (with 4xSAS Disk´s attached) on N54L without any Problem (DSM 4.3 / synoboot-3810-pre-v1.1_v4):

     

    root@cyberdisk:/opt/MegaRAID/MegaCli# ./MegaCli -AdpAllInfo -aAll

     

    Adapter #0

     

    ==============================================================================

    Versions

    ================

    Product Name : PERC H310 Adapter

    Serial No : 2BG09EO

    FW Package Build: 20.10.2-0002

     

    Mfg. Data

    ================

    Mfg. Date : 11/19/12

    Rework Date : 11/19/12

    Revision No : A00

    Battery FRU : N/A

     

    Image Versions in Flash:

    ================

    BIOS Version : 4.29.00_4.12.05.00_0x05110000

    Preboot CLI Version: 03.02-015:#%00008

    Ctrl-R Version : 3.00-0020

    NVDATA Version : 3.09.03-0038

    FW Version : 2.120.14-1504

    Boot Block Version : 2.02.00.00-0001

    Drivers requests for DSM 5.2

    in DSM 5.2 and earlier (Legacy)

    Posted

    The same problem in V4. How to solve it??

    if you reboot the system the system log show "system started counting down to reboot " but the system is run (all server are shut down expect VPN server)

    if you shutdown the system the system log show "system started counting down to shutdown " but the system is run (all server are shut down expect VPN server)

     

    No clue for this sorry.

     

    H310 > Backplane > drives

     

    Tried different controller (1068e) just by itself (one drive)

    Nothing

    no drives detected

     

    This is strange because I see this on your H300 logs

    md: Scanned 9 and added 9 devices
md/raid1:md0: active with 4 out of 12 mirrors
md/raid1:md1: active with 4 out of 12 mirrors

     

    Can you give me more informations/details of what happend when you boot and/or try to install on your H300 controller.

    Maybe mpt2sas doesn't work well with DELL PERC and need DELL driver

    I suppose the 1068e is LSI ?

     

    Hello,

     

    I use an original / unmodified DELL Perc H310. The Raid was created in the BIOS (Raid 10). Otherwise in my opinion it makes no sense, since the DSM would create a software-raid and so i would not need an hardware RAID adapter...

    Drivers requests for DSM 5.2

    in DSM 5.2 and earlier (Legacy)

    Posted

    This is an updated synoobot file which include several updates/fixes.

     

    Before doing anything, backup your data.

    No warranty for any damages, loss of data or anything else.

     

    Link : http://xpenology.trantor.be/beta/

    Copy *.ko to /lib/modules/

     

    We can finally install DSM on SCSI/SAS controller !

     

     

    Changelog:

    v4 (29/12/2013)

- You can now install DSM on drives connected to a SCSI/SAS controller
- Fix the volume "broken" issue when DSM is installed on a SCSI/SAS controller
- Fix NFS support
- Update megaraid_sas driver to the latest version
- Modify the way XPEnology's modules are loaded in ramdisk
- Include modules from previous beta
- Add PS2 keyboard support

v3 (21/12/2013)

- Add more drivers for KVM / virtio / virtualization support
- Add patched r8169 driver (realtek chips which are not working with the r8168 driver will work with this one)
- Add latest version of sk98lin driver (Marvell Yukon / SysKonnect SK-98xx/SK-95xx support)
- Update Broadcom bnx2 driver to latest version


v2 (05/12/2013)

- AX88179 Gigabit Ethernet USB 3.0
- Latest driver version for RocketRAID 3xxx/4xxx Controller
- Latest (aacraid) driver version for Adaptec
- Support XFS filesystem (no idea if DSM will automount this)


v1

- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)


SCSI
----

Highpoint Rocketraid 2720SGL
LSI mpt2sas v17
Adaptec aacraid
Intel C600 Series Chipset SAS


NETWORK
-------

3Com 3c590/3c900, 3cr990
Alteon AceNIC/3Com 3C985/NetGear GA620
QLogic QLA3XXX
SiS 900/7016 SiS190/SiS191


USB
---

USB to serial / Prolific 2303 driver


PATA
----

ATI PATA (PATA_ATIIXP)
AMD/NVidia PATA (PATA_AMD)
CMD64x PATA (PATA_CMD64X)
JMicron PATA (PATA_JMICRON)
Marvell PATA (PATA_MARVELL)
Promise PATA 2027x (PATA_PDC2027X)
Intel SCH PATA (PATA_SCH)
CMD / Silicon Image 680 PATA (PATA_SIL680)
SiS PATA (PATA_SIS)
VIA PATA (PATA_VIA)
Winbond SL82C105 PATA (PATA_WINBOND)
Legacy PATA support (PATA_LEGACY)

     

    Confirm :smile:

     

    Works! Thanks!

×
×
  • Create New...