hawie
-
Posts
37 -
Joined
-
Last visited
Everything posted by hawie
-
J4125 main board with 4 * RTL8125B, hw info, arc linux works OOB. r8169.ko drive r8125b?
-
Would u pls update the r8125 driver to latest? I am 'some people' ^_^ J4125 + onboard r8125*4, 918+ with 0.13.3, no lucky.
-
Anyone please help me upload the files to gofile.io, I can't access mega.nz here. thanks.
-
WOL. change RTL8111H mac to the loader's, WOL would be fine.
-
get one ASRock J4105-itx, HW accelerations, Shutdown/Reboot, 1.04b 918+ works OOB! only one question is, how to mod the RTL8111H mac? pg8168.exe need msdos, but the mainboard looks like without EFI/CSM module. any idea?
-
it's great, thanks! Haswell is good enough for HEVC transcoding, the wikipedia is not as trustworthy as your actual test. (^_^) the problem for me, is how to let it works with my mainboard and E3 1275 v3 CPU, which always kernel panic till now. any other changes with your loader? if yes, please share me.
-
https://mega.nz/#F!mRMVXKqS!AzAH57-3YIierx7O8C8FMA uploaded one more file, 4K HEVC 10bit clip. please test it with HW acceleration, 1285L v3.
-
C states disabled in BIOS. it's the latest version. just changed to 6.1.7 ds3617xs, shutdown and reboot works fine. but 1.04b 918+, no /dev/dri devices, can not shutdown/reboot, HW accelerations shows enabled but not function.
-
ASUS Q87T, https://www.asus.com/us/Motherboards/Q87TCSM/overview/ with XEON E3 1275v3 CPU, DDR3L 4GB * 2
-
I try it again step by step, still no lucky. maybe something wrong. the 915 driver always get kernel panic: [ 14.899201] [<ffffffffa05beccf>] i915_driver_load+0xa0f/0xe00 [i915] [ 14.899222] [<ffffffff813842d1>] driver_probe_device+0x1f1/0x310 [ 14.899223] [<ffffffff81384472>] __driver_attach+0x82/0x90 [ 14.899224] [<ffffffff813843f0>] ? driver_probe_device+0x310/0x310 [ 14.899227] [<ffffffff81383d69>] driver_attach+0x19/0x20 [ 14.899228] [<ffffffff81383993>] bus_add_driver+0x1b3/0x230 [ 14.899230] [<ffffffff81384c7b>] driver_register+0x5b/0xe0 [ 14.899231] [<ffffffff812fb337>] __pci_register_driver+0x47/0x50 and /dev/dri not exists.
-
thanks. shutdown and reboot problem, do u have it with 1285L v3 CPU? I tried some extra.lzma versions, common_args i915.enable_execlists=0, but failed. would u please send me your 1.04b loader modified? I wanna keep the CPU for performance.
-
Yes ^_^, I just tried in my iPhone XS too. Does 1.04b support J4105 or J5005 HW acceleration?
-
https://en.wikipedia.org/wiki/Intel_Quick_Sync_Video Found something. Haswell without HEVC support. Apollo Lake, J3455, even better……^_^
-
https://mega.nz/#F!mRMVXKqS!AzAH57-3YIierx7O8C8FMA
-
of coz, my E3 1275 v3, it's 4th generation (Haswell) , the same series as your e3 1285L v3. my ASUS Q87T + E3 1275 v3 + 1.04b, legal sn & mac from another official DS918+, only shows HW acceleration in Video Station, but NOT play H.265+4K video normally. Do u try it with 4K H.265 files?
-
Must I have J3455 to support hardware decoding? 1.04b with XEON 1275v3 (QSV supported, https://ark.intel.com/content/www/us/en/ark/products/75464/intel-xeon-processor-e3-1275-v3-8m-cache-3-50-ghz.html), Video Station shows HW acceleration enabled, but not working (can NOT decode H.265 4K). BTW, official DS918+, decode the same film (H.265 4K) fine, just checked.
-
already the case today with Jun's loader, at least with my N40L ... it's good news. but I found nothing /lib/modules/powernow-k8.ko found nothing cpufreq-set utilities. in dsm 5.x: insmod /lib/modules/powernow-k8.ko cpufreq-set -c 0 -g ondemand cpufreq-set -c 1 -g ondemand power meter show 5x watts if N54L cpu run on demand, 7x watts if not.
-
best wishes, next release 2.3 integrated with cpufreq support. also powernow driver (for AMD cpu, N54L...etc), which supported in DSM 5.x.
-
YES! it's correct. now update 7. the problem was, jun's loader did not mount the usb stick device with synoboot official vid 0xf400 / pid 0xf401. sfdisk -l shows no synoboot device. thanks a lot! add: In other words, jun's loader protected the usb stick not to be changed. ^_^
-
Did you upgraded from DSM 5->DSM6? Or Clean installed DSM 6? I'm asking because i also have an HP N54L and successfully installed Update 7 with no problem at all. Clean installed DSM 6 with update 5. I did not install the update 6. just do online upgrade to update 7, 100% done, but prompt 'update failed...' try manual update 6/update 7, fails too. It's grade to know N54L works with update 7, I'll try it again. thx.
-
Have you tried the upgrade fromthe control panel on the disk station ? Just did the 7'th update and everything went fine and straight forward... after online upgrade failed, try d/l update file first, then manual update. still no lucky.
-
update to 7 fails too. also tried update 6 first, exactly the same results. so, remains update 5 version. waiting for new progress... BTW: AMD cpu, N54L, ...
-
Congratulations! actually, I have one BAREMETAL N54L, updated to 6.0.2 update 5, too. but met some problems: 1) /etc/synoinfo.cfg, changed: internalportcfg=“0x00f" esataportcfg=“0xffff0" usbportcfg=“0xf00000" but esata disk not appears. "appended SataPortMap=4" would help this? any grub.cfg sample lines? thanks. 2) missing button.ko & acpid, can not power off when press power button. 3) missing powernow-k8.ko, can not power saving. ...maybe need recompiled, still found no source. any help? Thx a lot for this great forum and tutorials finally got my nas running.. - jun´s loader v1.01 (DSM 6.0.2-8451 Update 5) - Asrock J4205-ITX J4205 Apollolake SOD/U3/4S3 M-ITX - 8GB (1x 8192MB) HyperX Impact Black DDR3L-1600 SO-DIMM CL9 Single - 2x WD Red 3TB - Mach Xtreme Technology Ultra MX-ES MXUB3SESU-16G 16GB USB-Stick, USB 3.0 - Intel EXPI9301CTBLK PRO1000 Ethernet Adapter CT with flashed MAC address - PicoPSU-90 12V DC-DC ATX mini-ITX 0-90W power supply with Salcar 72W Transformator (12V 6A) - Raijintek Metis Mini-ITX case with Noctua NF-S12A FLX fan i would also ask like hawie if anybody please could help with this: - hdd hibernation - Power button shutdown - auto shutdown when no access / power safe i´ve read most of the post and first of all tried this http://xpenology.com/forum/viewtopic.php?f=2&p=75406#p75404 with no success. unzipped it an copied all files to their specific folders. no way very important information for me, thanks. Power button shutdown works now. FYI: sudo -i cd / tar zxvf power-off-repacked-for-dsm602.tar.gz reboot file attached, with minor fix. mega.nz not working. please access this link instead: http://pan.baidu.com/s/1miFcas4
-
Congratulations! actually, I have one BAREMETAL N54L, updated to 6.0.2 update 5, too. but met some problems: 1) /etc/synoinfo.cfg, changed: internalportcfg=“0x00f" esataportcfg=“0xffff0" usbportcfg=“0xf00000" but esata disk not appears. "appended SataPortMap=4" would help this? any grub.cfg sample lines? thanks. 2) missing button.ko & acpid, can not power off when press power button. 3) missing powernow-k8.ko, can not power saving. ...maybe need recompiled, still found no source. any help?
-
Board with NEC uPD720201 chip, works fine OOB.
