Jump to content
XPEnology Community

RainbowShaggy

Member
  • Posts

    22
  • Joined

  • Last visited

Posts posted by RainbowShaggy

  1. Hello everyone,

     

    I'm trying to install DSM 7.0 on my ESXi as well, but I'm also facing the issue where I get error at 56%. Below is some more info from serial console, but I couldn't find any solution to this yet. I also followed this tutorial: https://xpenology.club/install-dsm-7-on-baremetal-or-vm/

     

    Spoiler
    
    �[H�[J�[1;1Herror: file `/boot/grub/x86_64-efi/vbe.mod' not found.
    error: file `/boot/grub/x86_64-efi/vga.mod' not found.
    error: file `/boot/grub/unicode.pf2' not found.
    �[?25l�[m�[H�[J�[1;1H�[2;30HGNU GRUB  version 2.06
    
    �[m�[4;2H+----------------------------------------------------------------------------+�[5;2H|�[5;79H|�[6;2H|�[6;79H|�[7;2H|�[7;79H|�[8;2H|�[8;79H|�[9;2H|�[9;79H|�[10;2H|�[10;79H|�[11;2H|�[11;79H|�[12;2H|�[12;79H|�[13;2H|�[13;79H|�[14;2H|�[14;79H|�[15;2H|�[15;79H|�[16;2H|�[16;79H|�[17;2H+----------------------------------------------------------------------------+�[m�[18;2H�[19;2H�[m     Use the ^ and v keys to select which entry is highlighted.          
          Press enter to boot the selected OS, `e' to edit the commands       
          before booting or `c' for a command-line.                           �[5;80H �[m�[5;3H RedPill DS3615xs v7.0.1-42218 (USB, Verbose)                               �[m�[5;78H�[m�[7m�[6;3H*RedPill DS3615xs v7.0.1-42218 (SATA, Verbose)                              �[m�[6;78H�[m�[m�[7;3H Tiny Core Image Build                                                      �[m�[7;78H�[m�[m�[8;3H                                                                            �[m�[8;78H�[m�[m�[9;3H                                                                            �[m�[9;78H�[m�[m�[10;3H                                                                            �[m�[10;78H�[m�[m�[11;3H                                                                            �[m�[11;78H�[m�[m�[12;3H                                                                            �[m�[12;78H�[m�[m�[13;3H                                                                            �[m�[13;78H�[m�[m�[14;3H                                                                            �[m�[14;78H�[m�[m�[15;3H                                                                            �[m�[15;78H�[m�[m�[16;3H                                                                            �[m�[16;78H�[m�[16;80H �[6;78H�[22;1H   The highlighted entry will be executed automatically in 5s.                 �[6;78H�[22;1H   The highlighted entry will be executed automatically in 4s.                 �[6;78H�[22;1H   The highlighted entry will be executed automatically in 3s.                 �[6;78H�[22;1H   The highlighted entry will be executed automatically in 2s.                 �[6;78H�[22;1H                                                                               �[23;1H                                                                               �[6;78H�[?25h�[H�[J�[1;1H�[H�[J�[1;1HLoading Linux...
    Loading initramfs...
    Starting kernel with SATA boot
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.10.108 (root@build13) (gcc version 7.5.0 (GCC) ) #42218 SMP Mon Oct 18 19:15:14 CST 2021
    [    0.000000] Command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=1 pid=0xa4a5 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=001132FDE926 sn=1230LWN002037 vid=0x0525 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=0A00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=58
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000] Disabled fast string operations
    [    0.000000] e820: BIOS-provided physical RAM map:
    [    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
    [    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000df17fff] usable
    [    0.000000] BIOS-e820: [mem 0x000000000df18000-0x000000000df37fff] type 20
    [    0.000000] BIOS-e820: [mem 0x000000000df38000-0x000000000df87fff] reserved
    [    0.000000] BIOS-e820: [mem 0x000000000df88000-0x000000000dfa3fff] ACPI data
    [    0.000000] BIOS-e820: [mem 0x000000000dfa4000-0x000000000dfa7fff] ACPI NVS
    [    0.000000] BIOS-e820: [mem 0x000000000dfa8000-0x00000000bfffffff] usable
    [    0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffc17fff] reserved
    [    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
    [    0.000000] Early serial console at I/O port 0x3f8 (options '115200n')
    [    0.000000] bootconsole [uart0] enabled
    [    0.000000] NX (Execute Disable) protection: active
    [    0.000000] efi: EFI v2.31 by VMware, Inc.
    [    0.000000] efi:  SMBIOS=0xdfa5000  ACPI 2.0=0xdf95000
    [    0.000000] efi: mem00: type=10, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [    0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x00000000000a0000) (0MB)
    [    0.000000] efi: mem02: type=2, attr=0xf, range=[0x0000000000100000-0x00000000037cc000) (54MB)
    [    0.000000] efi: mem03: type=7, attr=0xf, range=[0x00000000037cc000-0x0000000004000000) (8MB)
    [    0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000004000000-0x00000000076cc000) (54MB)
    [    0.000000] efi: mem05: type=7, attr=0xf, range=[0x00000000076cc000-0x000000000b4de000) (62MB)
    [    0.000000] efi: mem06: type=1, attr=0xf, range=[0x000000000b4de000-0x000000000b4ff000) (0MB)
    [    0.000000] efi: mem07: type=7, attr=0xf, range=[0x000000000b4ff000-0x000000000b521000) (0MB)
    [    0.000000] efi: mem08: type=4, attr=0xf, range=[0x000000000b521000-0x000000000b544000) (0MB)
    [    0.000000] efi: mem09: type=2, attr=0xf, range=[0x000000000b544000-0x000000000b545000) (0MB)
    [    0.000000] efi: mem10: type=4, attr=0xf, range=[0x000000000b545000-0x000000000b588000) (0MB)
    [    0.000000] efi: mem11: type=7, attr=0xf, range=[0x000000000b588000-0x000000000b589000) (0MB)
    [    0.000000] efi: mem12: type=4, attr=0xf, range=[0x000000000b589000-0x000000000c629000) (16MB)
    [    0.000000] efi: mem13: type=3, attr=0xf, range=[0x000000000c629000-0x000000000c640000) (0MB)
    [    0.000000] efi: mem14: type=4, attr=0xf, range=[0x000000000c640000-0x000000000c643000) (0MB)
    [    0.000000] efi: mem15: type=3, attr=0xf, range=[0x000000000c643000-0x000000000c64b000) (0MB)
    [    0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000000c64b000-0x000000000c656000) (0MB)
    [    0.000000] efi: mem17: type=3, attr=0xf, range=[0x000000000c656000-0x000000000c65a000) (0MB)
    [    0.000000] efi: mem18: type=4, attr=0xf, range=[0x000000000c65a000-0x000000000c65b000) (0MB)
    [    0.000000] efi: mem19: type=3, attr=0xf, range=[0x000000000c65b000-0x000000000c66c000) (0MB)
    [    0.000000] efi: mem20: type=4, attr=0xf, range=[0x000000000c66c000-0x000000000c66e000) (0MB)
    [    0.000000] efi: mem21: type=3, attr=0xf, range=[0x000000000c66e000-0x000000000c6a5000) (0MB)
    [    0.000000] efi: mem22: type=4, attr=0xf, range=[0x000000000c6a5000-0x000000000c6a7000) (0MB)
    [    0.000000] efi: mem23: type=3, attr=0xf, range=[0x000000000c6a7000-0x000000000c6ba000) (0MB)
    [    0.000000] efi: mem24: type=4, attr=0xf, range=[0x000000000c6ba000-0x000000000c6bb000) (0MB)
    [    0.000000] efi: mem25: type=3, attr=0xf, range=[0x000000000c6bb000-0x000000000c6f0000) (0MB)
    [    0.000000] efi: mem26: type=4, attr=0xf, range=[0x000000000c6f0000-0x000000000c6f3000) (0MB)
    [    0.000000] efi: mem27: type=3, attr=0xf, range=[0x000000000c6f3000-0x000000000c6f7000) (0MB)
    [    0.000000] efi: mem28: type=4, attr=0xf, range=[0x000000000c6f7000-0x000000000c6f9000) (0MB)
    [    0.000000] efi: mem29: type=3, attr=0xf, range=[0x000000000c6f9000-0x000000000c709000) (0MB)
    [    0.000000] efi: mem30: type=4, attr=0xf, range=[0x000000000c709000-0x000000000c70a000) (0MB)
    [    0.000000] efi: mem31: type=3, attr=0xf, range=[0x000000000c70a000-0x000000000c718000) (0MB)
    [    0.000000] efi: mem32: type=4, attr=0xf, range=[0x000000000c718000-0x000000000de28000) (23MB)
    [    0.000000] efi: mem33: type=3, attr=0xf, range=[0x000000000de28000-0x000000000df18000) (0MB)
    [    0.000000] efi: mem34: type=5, attr=0x800000000000000f, range=[0x000000000df18000-0x000000000df38000) (0MB)
    [    0.000000] efi: mem35: type=6, attr=0x800000000000000f, range=[0x000000000df38000-0x000000000df88000) (0MB)
    [    0.000000] efi: mem36: type=9, attr=0xf, range=[0x000000000df88000-0x000000000dfa4000) (0MB)
    [    0.000000] efi: mem37: type=10, attr=0xf, range=[0x000000000dfa4000-0x000000000dfa8000) (0MB)
    [    0.000000] efi: mem38: type=4, attr=0xf, range=[0x000000000dfa8000-0x0000000010000000) (32MB)
    [    0.000000] efi: mem39: type=7, attr=0xf, range=[0x0000000010000000-0x0000000035ac7000) (602MB)
    [    0.000000] efi: mem40: type=2, attr=0xf, range=[0x0000000035ac7000-0x0000000036d5b000) (18MB)
    [    0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000036d5b000-0x0000000091301000) (1445MB)
    [    0.000000] efi: mem42: type=1, attr=0xf, range=[0x0000000091301000-0x00000000c0000000) (748MB)
    [    0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000100000000-0x0000000140000000) (1024MB)
    [    0.000000] efi: mem44: type=11, attr=0x8000000000000000, range=[0x00000000ffc00000-0x00000000ffc18000) (0MB)
    [    0.000000] SMBIOS 2.7 present.
    [    0.000000] DMI: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.0.B64.2008052155 08/05/2020
    [    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-FFFFF uncachable
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 00000000000 mask 7FE00000000 write-back
    [    0.000000]   1 base 000C0000000 mask 7FFC0000000 uncachable
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
    [    0.000000] e820: last_pfn = 0xc0000 max_arch_pfn = 0x400000000
    [    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [    0.000000]  [mem 0x00000000-0x000fffff] page 4k
    [    0.000000] BRK [0x04b2c000, 0x04b2cfff] PGTABLE
    [    0.000000] BRK [0x04b2d000, 0x04b2dfff] PGTABLE
    [    0.000000] BRK [0x04b2e000, 0x04b2efff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
    [    0.000000]  [mem 0x13fe00000-0x13fffffff] page 2M
    [    0.000000] BRK [0x04b2f000, 0x04b2ffff] PGTABLE
    [    0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
    [    0.000000]  [mem 0x13c000000-0x13fdfffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
    [    0.000000]  [mem 0x100000000-0x13bffffff] page 2M
    [    0.000000] init_memory_mapping: [mem 0x00100000-0x0df17fff]
    [    0.000000]  [mem 0x00100000-0x001fffff] page 4k
    [    0.000000]  [mem 0x00200000-0x0ddfffff] page 2M
    [    0.000000]  [mem 0x0de00000-0x0df17fff] page 4k
    [    0.000000] init_memory_mapping: [mem 0x0dfa8000-0xbfffffff]
    [    0.000000]  [mem 0x0dfa8000-0x0dffffff] page 4k
    [    0.000000]  [mem 0x0e000000-0xbfffffff] page 2M
    [    0.000000] BRK [0x04b30000, 0x04b30fff] PGTABLE
    [    0.000000] BRK [0x04b31000, 0x04b31fff] PGTABLE
    [    0.000000] log_buf_len: 33554432
    [    0.000000] early log buf free: 1039780(99%)
    [    0.000000] RAMDISK: [mem 0x35ac7000-0x36d5afff]
    [    0.000000] ACPI: RSDP 0x000000000DF95000 00024 (v02 VMWARE)
    [    0.000000] ACPI: XSDT 0x000000000DF95060 00054 (v01 INTEL  440BX    06040000 VMW  01324272)
    [    0.000000] ACPI: SRAT 0x000000000DF950B4 000C8 (v02 VMWARE EFISRAT  06040001 VMW  000007CE)
    [    0.000000] ACPI: FACP 0x000000000DFA32D2 000F4 (v04 INTEL  440BX    06040000 PTL  000F4240)
    [    0.000000] ACPI: DSDT 0x000000000DF9517C 0E156 (v01 PTLTD  Custom   00000000 INTL 20130823)
    [    0.000000] ACPI: FACS 0x000000000DFA4000 00040
    [    0.000000] ACPI: APIC 0x000000000DFA343A 0005E (v02 VMWARE EFIAPIC  06040001 VMW  000007CE)
    [    0.000000] ACPI: MCFG 0x000000000DFA3498 0003C (v01 VMWARE EFIMCFG  06040001 VMW  000007CE)
    [    0.000000] ACPI: HPET 0x000000000DFA34D4 00038 (v01 VMWARE VMW HPET 00000000 VMW  00000000)
    [    0.000000] ACPI: WAET 0x000000000DFA350C 00028 (v01 VMWARE VMW WAET 06040001 VMW  00000001)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff880139600000-ffff88013cdfffff] on node 0
    [    0.000000] Zone ranges:
    [    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
    [    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
    [    0.000000]   Normal   [mem 0x100000000-0x13fffffff]
    [    0.000000] Movable zone start for each node
    [    0.000000] Early memory node ranges
    [    0.000000]   node   0: [mem 0x00001000-0x0009ffff]
    [    0.000000]   node   0: [mem 0x00100000-0x0df17fff]
    [    0.000000]   node   0: [mem 0x0dfa8000-0xbfffffff]
    [    0.000000]   node   0: [mem 0x100000000-0x13fffffff]
    [    0.000000] On node 0 totalpages: 1048335
    [    0.000000]   DMA zone: 56 pages used for memmap
    [    0.000000]   DMA zone: 23 pages reserved
    [    0.000000]   DMA zone: 3999 pages, LIFO batch:0
    [    0.000000]   DMA32 zone: 10695 pages used for memmap
    [    0.000000]   DMA32 zone: 782192 pages, LIFO batch:31
    [    0.000000]   Normal zone: 3584 pages used for memmap
    [    0.000000]   Normal zone: 262144 pages, LIFO batch:31
    [    0.000000] ACPI: PM-Timer IO Port: 0x448
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086af01 base: 0xfed00000
    [    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [    0.000000] PM: Registered nosave memory: 000000000df18000 - 000000000df38000
    [    0.000000] PM: Registered nosave memory: 000000000df38000 - 000000000df88000
    [    0.000000] PM: Registered nosave memory: 000000000df88000 - 000000000dfa4000
    [    0.000000] PM: Registered nosave memory: 000000000dfa4000 - 000000000dfa8000
    [    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000ffc00000
    [    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffc18000
    [    0.000000] PM: Registered nosave memory: 00000000ffc18000 - 0000000100000000
    [    0.000000] e820: [mem 0xc0000000-0xffbfffff] available for PCI devices
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013dc00000 s80704 r8192 d21696 u1048576
    [    0.000000] pcpu-alloc: s80704 r8192 d21696 u1048576 alloc=1*2097152
    [    0.000000] pcpu-alloc: [0] 0 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1033977
    [    0.000000] Kernel command line: BOOT_IMAGE=/zImage withefi earlyprintk syno_hw_version=DS3615xs console=ttyS0,115200n8 netif_num=1 pid=0xa4a5 earlycon=uart8250,io,0x3f8,115200n8 synoboot_satadom=1 syno_port_thaw=1 mac1=001132FDE926 sn=1230LWN002037 vid=0x0525 elevator=elevator loglevel=15 HddHotplug=0 DiskIdxMap=0A00 syno_hdd_detect=0 vender_format_version=2 syno_hdd_powerup_seq=0 log_buf_len=32M root=/dev/md0 SataPortMap=58
    [    0.000000] Synology Hardware Version: DS3615xs-j
    [    0.000000] Internal netif num: 1
    [    0.000000] Synology boot device SATADOM: 1
    [    0.000000] Mac1: 001132FDE926
    [    0.000000] Serial Number: 1230LWN002037
    [    0.000000] Disk Index Map: 0A00
    [    0.000000] Vender format version: 2
    [    0.000000] Power on seq num: 0
    [    0.000000] Sata Port Map: 58
    [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [    0.000000] Memory: 3924068k/5242880k available (4820k kernel code, 1049540k absent, 269272k reserved, 4065k data, 828k init)
    [    0.000000] Kernel/User page tables isolation: disabled
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]     CONFIG_RCU_FANOUT set to non-default value of 32
    [    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [    0.000000] NR_IRQS:4352 nr_irqs:512 16
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [ttyS0] enabled, bootconsole disabled
    [    0.850595] PCI host bridge to bus 0001:07
    [    0.850779] pci_bus 0001:07: root bus resource [io  0x0000-0xffff]
    [    0.851501] pci_bus 0001:07: root bus resource [mem 0x00000000-0x7ffffffffff]
    [    0.851895] pci_bus 0001:07: root bus resource [bus 00-ff]
    [    0.852515] pci 0001:07:00.0: [1b4b:9235] type 00 class 0x010601
    [    0.853645] pci 0001:07:00.0: Can't map mv9235 registers
    [    0.854599] PCI host bridge to bus 0001:08
    [    0.854881] pci_bus 0001:08: root bus resource [io  0x0000-0xffff]
    [    0.855320] pci_bus 0001:08: root bus resource [mem 0x00000000-0x7ffffffffff]
    [    0.855620] pci_bus 0001:08: root bus resource [bus 00-ff]
    [    0.856511] pci 0001:08:00.0: [1b4b:9235] type 00 class 0x010601
    [    0.857717] pci 0001:08:00.0: Can't map mv9235 registers
    [    0.858214] PCI host bridge to bus 0001:09
    [    0.858535] pci_bus 0001:09: root bus resource [io  0x0000-0xffff]
    [    0.858974] pci_bus 0001:09: root bus resource [mem 0x00000000-0x7ffffffffff]
    [    0.859608] pci_bus 0001:09: root bus resource [bus 00-ff]
    [    0.859978] pci 0001:09:00.0: [1b4b:9235] type 00 class 0x010601
    [    0.860565] pci 0001:09:00.0: Can't map mv9235 registers
    [    0.860998] PCI host bridge to bus 0001:0a
    [    0.861303] pci_bus 0001:0a: root bus resource [io  0x0000-0xffff]
    [    0.862016] pci_bus 0001:0a: root bus resource [mem 0x00000000-0x7ffffffffff]
    [    0.862607] pci_bus 0001:0a: root bus resource [bus 00-ff]
    [    0.862999] pci 0001:0a:00.0: [1b4b:9235] type 00 class 0x010601
    [    0.863625] pci 0001:0a:00.0: Can't map mv9235 registers
    [    0.872194] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [    0.872518] software IO TLB [mem 0xbc000000-0xc0000000] (64MB) mapped at [ffff8800bc000000-ffff8800bfffffff]
    [    0.879668] Initialise module verification
    [    0.880025] audit: initializing netlink socket (disabled)
    [    0.880548] type=2000 audit(1643555160.860:1): initialized
    [    0.893519] bounce pool size: 64 pages
    [    0.894924] VFS: Disk quotas dquot_6.5.2
    [    0.895220] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [    0.895934] msgmni has been set to 7849
    [    0.896558] Key type asymmetric registered
    [    0.897537] Asymmetric key parser 'x509' registered
    [    0.898638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.899208] io scheduler noop registered
    [    0.899879] io scheduler deadline registered
    [    0.900570] io scheduler cfq registered (default)
    [    0.901740] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
    [    0.902518] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
    [    0.903601] pcieport 0000:00:15.2: irq 42 for MSI/MSI-X
    [    0.905532] pcieport 0000:00:15.3: irq 43 for MSI/MSI-X
    [    0.906758] pcieport 0000:00:15.4: irq 44 for MSI/MSI-X
    [    0.909355] pcieport 0000:00:15.5: irq 45 for MSI/MSI-X
    [    0.911106] pcieport 0000:00:15.6: irq 46 for MSI/MSI-X
    [    0.914036] pcieport 0000:00:15.7: irq 47 for MSI/MSI-X
    [    0.915405] pcieport 0000:00:16.0: irq 48 for MSI/MSI-X
    [    0.916787] pcieport 0000:00:16.1: irq 49 for MSI/MSI-X
    [    0.918675] pcieport 0000:00:16.2: irq 50 for MSI/MSI-X
    [    0.920640] pcieport 0000:00:16.3: irq 51 for MSI/MSI-X
    [    0.923106] pcieport 0000:00:16.4: irq 52 for MSI/MSI-X
    [    0.924775] pcieport 0000:00:16.5: irq 53 for MSI/MSI-X
    [    0.926387] pcieport 0000:00:16.6: irq 54 for MSI/MSI-X
    [    0.928565] pcieport 0000:00:16.7: irq 55 for MSI/MSI-X
    [    0.930558] pcieport 0000:00:17.0: irq 56 for MSI/MSI-X
    [    0.932148] pcieport 0000:00:17.1: irq 57 for MSI/MSI-X
    [    0.934201] pcieport 0000:00:17.2: irq 58 for MSI/MSI-X
    [    0.936127] pcieport 0000:00:17.3: irq 59 for MSI/MSI-X
    [    0.938792] pcieport 0000:00:17.4: irq 60 for MSI/MSI-X
    [    0.940078] pcieport 0000:00:17.5: irq 61 for MSI/MSI-X
    [    0.941779] pcieport 0000:00:17.6: irq 62 for MSI/MSI-X
    [    0.943533] pcieport 0000:00:17.7: irq 63 for MSI/MSI-X
    [    0.945172] pcieport 0000:00:18.0: irq 64 for MSI/MSI-X
    [    0.947597] pcieport 0000:00:18.1: irq 65 for MSI/MSI-X
    [    0.949551] pcieport 0000:00:18.2: irq 66 for MSI/MSI-X
    [    0.951170] pcieport 0000:00:18.3: irq 67 for MSI/MSI-X
    [    0.953292] pcieport 0000:00:18.4: irq 68 for MSI/MSI-X
    [    0.955872] pcieport 0000:00:18.5: irq 69 for MSI/MSI-X
    [    0.957300] pcieport 0000:00:18.6: irq 70 for MSI/MSI-X
    [    0.959231] pcieport 0000:00:18.7: irq 71 for MSI/MSI-X
    [    1.475275] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    1.498670] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.522982] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    [    1.582420] brd: module loaded
    [    1.589441] Loading iSCSI transport class v2.0-870.
    [    1.611085] rdac: device handler registered
    [    1.614706] ahci 0000:02:01.0: version 3.0
    [    1.615244] ahci 0000:02:01.0: irq 72 for MSI/MSI-X
    [    1.616050] ahci 0000:02:01.0: AHCI 0001.0300 32 slots 30 ports 6 Gbps 0x3fffffff impl SATA mode
    [    1.616903] ahci 0000:02:01.0: flags: 64bit ncq clo only
    [    1.617397] ahci 0000:02:01.0: setting latency timer to 64
    [    1.634096] scsi0 : ahci
    [    1.637544] scsi1 : ahci
    [    1.640188] scsi2 : ahci
    [    1.642746] scsi3 : ahci
    [    1.643771] scsi4 : ahci
    [    1.645833] ata1: SATA max UDMA/133 abar m4096@0xfc000000 port 0xfc000100 irq 72
    [    1.646478] ata2: SATA max UDMA/133 abar m4096@0xfc000000 port 0xfc000180 irq 72
    [    1.647336] ata3: SATA max UDMA/133 abar m4096@0xfc000000 port 0xfc000200 irq 72
    [    1.648155] ata4: SATA max UDMA/133 abar m4096@0xfc000000 port 0xfc000280 irq 72
    [    1.648702] ata5: SATA max UDMA/133 abar m4096@0xfc000000 port 0xfc000300 irq 72
    [    1.649418] ahci: probe of 0001:07:00.0 failed with error -22
    [    1.649761] ahci: probe of 0001:08:00.0 failed with error -22
    [    1.650700] ahci: probe of 0001:09:00.0 failed with error -22
    [    1.651766] ahci: probe of 0001:0a:00.0 failed with error -22
    [    1.677628] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    1.678388] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [    1.679287] i2c /dev entries driver
    [    1.679890] md: raid1 personality registered for level 1
    [    1.680355] cpuidle: using governor ladder
    [    1.680863] cpuidle: using governor menu
    [    1.681271] TCP: cubic registered
    [    1.681701] NET: Registered protocol family 17
    [    1.682128] Key type dns_resolver registered
    [    1.874805] tsc: Refined TSC clocksource calibration: 2260.988 MHz
    [    1.875754] Switching to clocksource tsc
    [    1.956791] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.957850] ata2.00: ATA-6: VMware Virtual SATA Hard Drive, 00000001, max UDMA/100
    [    1.958782] ata2.00: 62914560 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [    1.959781] ata2.00: SN:01000000000000000001
    [    1.960830] ata3: SATA link down (SStatus 0 SControl 300)
    [    1.961852] ata4: SATA link down (SStatus 0 SControl 300)
    [    1.962813] ata5: SATA link down (SStatus 0 SControl 300)
    [    1.963840] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.964863] ata1.00: ATAPI: VMware Virtual SATA CDRW Drive, 00000001, max UDMA/33
    [    1.965859] ata1.00: configured for UDMA/33
    [    1.966845] ata1.00: Find SSD disks. [VMware Virtual SATA CDRW Drive]
    [    1.966857] ata2.00: configured for UDMA/100
    [    1.968986] scsi 0:0:0:0: CD-ROM            NECVMWar VMware SATA CD00         1.00 PQ: 0 ANSI: 5
    [    1.970964] ata2.00: Find SSD disks. [VMware Virtual SATA Hard Drive]
    [    1.971872] scsi 1:0:0:0: Direct-Access     VMware   Virtual SATA Hard Drive  0000 PQ: 0 ANSI: 5
    [    1.975128] sd 1:0:0:0: [sdl] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
    [    1.976066] sd 1:0:0:0: [sdl] Write Protect is off
    [    1.976501] sd 1:0:0:0: [sdl] Mode Sense: 00 3a 00 00
    [    1.977208] sd 1:0:0:0: [sdl] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [    1.980613]  sdl: sdl1 sdl2
    [    1.983617] sd 1:0:0:0: [sdl] Attached SCSI disk
    [    1.984100] Loading module verification blacklist certificates
    [    1.984656] Loading module verification certificates
    [    1.985169] MODSIGN: Loaded cert 'Synology SDG kernel module signing key: 7bd0b0d6bcd31651c22ce3978bdc8c8bdc417329'
    [    1.986793] MODSIGN: Loaded cert 'Synology Root Certification Authority: f2c075361f168425f8b5ef31b796406c3aab2089'
    [    1.987929] MODSIGN: Loaded cert 'Synology Kernel Module Signing Certification Authority: 600839b5d127e0e11d817a31f0575d323a7c0e28'
    [    1.989070] MODSIGN: Loaded cert 'Synology kernel module signing key: 4646ce54489669338118a3b1286da156ac366fa5'
    [    1.990105] registered taskstats version 1
    [    1.994801] rtc_cmos 00:03: setting system clock to 2022-01-30 15:06:03 UTC (1643555163)
    [    1.996014] Freeing unused kernel memory: 828k freed
    [    1.996540] Write protecting the kernel read-only data: 8192k
    [    1.997322] Freeing unused kernel memory: 1312k freed
    [    1.997858] Freeing unused kernel memory: 480k freed
    START /linuxrc.syno
    START /linuxrc.syno.impl
    Insert basic USB modules...
    :: Loading module usb-common ... [  OK  ]
    :: Loading module usbcore[    2.049937] ACPI: bus type USB registered
    [    2.051456] usbcore: registered new interface driver usbfs
    [    2.053001] usbcore: registered new interface driver hub
    [    2.055838] usbcore: registered new interface driver ethub
    [    2.057996] usbcore: registered new device driver usb
     ... [  OK  ]
    :: Loading module ehci-hcd[    2.070001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
     ... [  OK  ]
    :: Loading module ehci-pci[    2.078016] ehci-pci: EHCI PCI platform driver
     ... [  OK  ]
    :: Loading module uhci-hcd[    2.088010] uhci_hcd: USB Universal Host Controller Interface driver
     ... [  OK  ]
    :: Loading module xhci-hcd[    2.098010] xhci_hcd 0000:13:00.0: xHCI Host Controller
    [    2.098882] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 1
    [    2.100609] xhci_hcd 0000:13:00.0: cache line size of 32 is not supported
    [    2.101862] xhci_hcd 0000:13:00.0: irq 73 for MSI/MSI-X
    [    2.102841] xhci_hcd 0000:13:00.0: irq 74 for MSI/MSI-X
    [    2.103841] xhci_hcd 0000:13:00.0: irq 75 for MSI/MSI-X
    [    2.106130] xHCI xhci_add_endpoint called for root hub
    [    2.107893] xHCI xhci_check_bandwidth called for root hub
    [    2.108638] hub 1-0:1.0: USB hub found
    [    2.109178] hub 1-0:1.0: 4 ports detected
    [    2.109904] xhci_hcd 0000:13:00.0: xHCI Host Controller
    [    2.110577] xhci_hcd 0000:13:00.0: new USB bus registered, assigned bus number 2
    [    2.112417] xHCI xhci_add_endpoint called for root hub
    [    2.113080] xHCI xhci_check_bandwidth called for root hub
    [    2.114527] hub 2-0:1.0: USB hub found
    [    2.115128] hub 2-0:1.0: 4 ports detected
     ... [  OK  ]
    :: Loading module usb-storage[    2.142091] usbcore: registered new interface driver usb-storage
     ... [  OK  ]
    :: Loading kernel modules from extensions ...
    Loading kmod #0 "vmw_pvscsi.ko" for pocopico.vmw_pvscsi (args: )
    [    2.156749] VMware PVSCSI driver - version 1.0.2.0-k
    [    2.156858] vmw_pvscsi: using 64bit dma
    [    2.158061] vmw_pvscsi 0000:03:00.0: vmw_pvscsi: host->max_id: 16
    [    2.159062] vmw_pvscsi 0000:03:00.0: irq 76 for MSI/MSI-X
    [    2.159686] vmw_pvscsi: using MSI-X
    [    2.160115] scsi5 : VMware PVSCSI storage adapter rev 2, req/cmp/msg rings: 8/8/1 pages, cmd_per_lun=64
    [    2.162195] vmw_pvscsi 0000:03:00.0: VMware PVSCSI rev 2 host #5
    Loading kmod #0 "vmxnet3.ko" for pocopico.vmxnet3 (args: )
    [    2.173170] VMware vmxnet3 virtual NIC driver - version 1.1.30.0-k-NAPI
    [    2.173889] vmxnet3 0000:0b:00.0: # of Tx queues : 2, # of Rx queues : 2
    [    2.174585] vmxnet3 0000:0b:00.0: enabling device (0000 -> 0003)
    [    2.176083] vmxnet3 0000:0b:00.0: irq 77 for MSI/MSI-X
    [    2.176859] vmxnet3 0000:0b:00.0: irq 78 for MSI/MSI-X
    [    2.178890] vmxnet3 0000:0b:00.0: irq 79 for MSI/MSI-X
    [    2.182395] vmxnet3 0000:0b:00.0 eth0: NIC Link is Up 10000 Mbps
    Checking if kmods for thethorgroup.virtio should run using check-virtio.sh script
    Checking for VirtIO
    *No* VirtIO hypervisor detected
    NOT loading kmods for thethorgroup.virtio
    :: Loading kernel modules from extensions ... [  OK  ]
    :: Executing "on_boot" custom scripts ...
    Running "check-vmw_pvscsi.sh" for pocopico.vmw_pvscsi->on_boot
    Loading module vmw_pvscsi -> Module vmw_pvscsi loaded succesfully
    Ran "check-vmw_pvscsi.sh" for pocopico.vmw_pvscsi->on_boot - exit=0
    Running "check-vmxnet3.sh" for pocopico.vmxnet3->on_boot
    Loading module vmxnet3 -> Module vmxnet3 loaded succesfully
    Ran "check-vmxnet3.sh" for pocopico.vmxnet3->on_boot - exit=0
    Running "boot-wait.sh" for thethorgroup.boot-wait->on_boot
    Still waiting for boot device (waited 1 of 30 seconds)
    [    3.434142] usb 1-1: new full-speed USB device number 2 using xhci_hcd
    [    3.446511] Got empty serial number. Generate serial number from product.
    Still waiting for boot device (waited 2 of 30 seconds)
    Still waiting for boot device (waited 3 of 30 seconds)
    Still waiting for boot device (waited 4 of 30 seconds)
    Still waiting for boot device (waited 5 of 30 seconds)
    Still waiting for boot device (waited 6 of 30 seconds)
    Still waiting for boot device (waited 7 of 30 seconds)
    Still waiting for boot device (waited 8 of 30 seconds)
    Still waiting for boot device (waited 9 of 30 seconds)
    Still waiting for boot device (waited 10 of 30 seconds)
    Still waiting for boot device (waited 11 of 30 seconds)
    Still waiting for boot device (waited 12 of 30 seconds)
    Still waiting for boot device (waited 13 of 30 seconds)
    Still waiting for boot device (waited 14 of 30 seconds)
    Still waiting for boot device (waited 15 of 30 seconds)
    Still waiting for boot device (waited 16 of 30 seconds)
    Still waiting for boot device (waited 17 of 30 seconds)
    Still waiting for boot device (waited 18 of 30 seconds)
    Still waiting for boot device (waited 19 of 30 seconds)
    Still waiting for boot device (waited 20 of 30 seconds)
    Still waiting for boot device (waited 21 of 30 seconds)
    Still waiting for boot device (waited 22 of 30 seconds)
    Still waiting for boot device (waited 23 of 30 seconds)
    Still waiting for boot device (waited 24 of 30 seconds)
    Still waiting for boot device (waited 25 of 30 seconds)
    Still waiting for boot device (waited 26 of 30 seconds)
    Still waiting for boot device (waited 27 of 30 seconds)
    Still waiting for boot device (waited 28 of 30 seconds)
    Still waiting for boot device (waited 29 of 30 seconds)
    Still waiting for boot device (waited 30 of 30 seconds)
    ERROR: Timeout waiting for /dev/synoboot device to appear.
    Most likely your vid/pid configuration is numount: /etc/mtab: No such file or directory
    
    linuxrc.syno failed on 99
    
    starting pid 4046, tty '': '/etc/rc'
    :: Starting /etc/rc
    :: Mounting procfs ... [  OK  ]
    :: Mounting tmpfs ... [  OK  ]
    :: Mounting devtmpfs ... [  OK  ]
    :: Mounting devpts ... [  OK  ]
    :: Mounting sysfs ... [  OK  ]
    [   34.520678] md: md1 stopped.
    [   34.522897] md: bind<sdl2>
    [   34.524800] md/raid1:md1: active with 1 out of 16 mirrors
    [   34.630801] md1: detected capacity change from 0 to 2147418112
    [   34.633403]  md1: unknown partition table
    [   34.645567] Adding 2097084k swap on /dev/md1.  Priority:-1 extents:1 across:2097084k
    :: Loading module sg[   34.713667] scsi 0:0:0:0: Attached scsi generic sg0 type 5
    [   34.716090] sd 1:0:0:0: Attached scsi generic sg1 type 0
     ... [  OK  ]
    :: Loading module fat ... [  OK  ]
    :: Loading module vfat ... [  OK  ]
    :: Loading module ip_tunnel ... [  OK  ]
    :: Loading module vxlan ... [  OK  ]
    :: Loading module dca[   34.812569] dca service started, version 1.12.1
     ... [  OK  ]
    :: Loading module e1000e[   34.828623] e1000e: Intel(R) PRO/1000 Network Driver - 3.4.2.4-NAPI
    [   34.830971] e1000e: Copyright(c) 1999 - 2019 Intel Corporation.
     ... [  OK  ]
    :: Loading module i2c-algo-bit ... [  OK  ]
    :: Loading module igb[   34.853578] Intel(R) Gigabit Ethernet Linux Driver - version 5.3.5.22
    [   34.855971] Copyright(c) 2007 - 2018 Intel Corporation.
     ... [  OK  ]
    :: Loading module ixgbe[   34.872809] Intel(R) 10GbE PCI Express Linux Network Driver - version 5.5.5
    [   34.875386] Copyright(c) 1999 - 2019 Intel Corporation.
     ... [  OK  ]
    :: Loading module i40e[   34.894529] i40e: Intel(R) 40-10 Gigabit Ethernet Connection Network Driver - version 2.7.29
    [   34.897617] i40e: Copyright(c) 2013 - 2018 Intel Corporation.
     ... [  OK  ]
    :: Loading module sunrpc[   34.921872] RPC: Registered named UNIX socket transport module.
    [   34.924065] RPC: Registered udp transport module.
    [   34.925829] RPC: Registered tcp transport module.
    [   34.927574] RPC: Registered tcp NFSv4.1 backchannel transport module.
     ... [  OK  ]
    :: Loading module lockd ... [  OK  ]
    :: Loading module nfs ... [  OK  ]
    :: Loading module nfsv3 ... [  OK  ]
    :: Loading module i2c-i801 ... [  OK  ]
    :: Loading module adt7475 ... [  OK  ]
    Can not detect ADT device, Retry: 1...
    :: Unloading module adt7475[   36.009898] Module [adt7475] is removed.
     ... [  OK  ]
    :: Unloading module i2c-i801[   36.021033] Module [i2c_i801] is removed.
     ... [  OK  ]
    :: Loading module i2c-i801 ... [  OK  ]
    :: Loading module adt7475 ... [  OK  ]
    Can not detect ADT device, Retry: 2...
    :: Unloading module adt7475[   38.066350] Module [adt7475] is removed.
     ... [  OK  ]
    :: Unloading module i2c-i801[   38.077002] Module [i2c_i801] is removed.
     ... [  OK  ]
    :: Loading module i2c-i801 ... [  OK  ]
    :: Loading module adt7475 ... [  OK  ]
    Can not detect ADT device, Retry: 3...
    :: Unloading module adt7475[   40.121825] Module [adt7475] is removed.
     ... [  OK  ]
    :: Unloading module i2c-i801[   40.132693] Module [i2c_i801] is removed.
     ... [  OK  ]
    :: Loading module i2c-i801 ... [  OK  ]
    :: Loading module adt7475 ... [  OK  ]
    [   41.175934] bromolow_synobios: module license 'Synology Inc.' taints kernel.
    [   41.178472] Disabling lock debugging due to kernel taint
    [   41.186300] synobios open /dev/ttyS1 success
    [   41.208293] 2022-1-30 15:6:41 UTC
    [   41.209536] synobios: load, major number 201
    [   41.211107] Brand: Synology
    [   41.212160] Model: DS-3615xs
    [   41.213236] set group disks wakeup number to 4, spinup time deno 7
    [   41.215464] synobios cpu_arch proc entry initialized
    [   41.217273] synobios crypto_hw proc entry initialized
    [   41.219116] synobios syno_platform proc entry initialized
    Starting SW init...
    [   41.232138] Module [bromolow_synobios] is removed.
    [   41.234004] synobios: unload
    :: Loading module synobios[   41.274417] synobios open /dev/ttyS1 success
    [   41.276296] 2022-1-30 15:6:41 UTC
    [   41.277532] synobios: load, major number 201
    [   41.279099] Brand: Synology
    [   41.280147] Model: DS-3615xs
    [   41.281231] set group disks wakeup number to 4, spinup time deno 7
    [   41.283457] synobios cpu_arch proc entry initialized
    [   41.285260] synobios crypto_hw proc entry initialized
    [   41.287100] synobios syno_platform proc entry initialized
     ... [  OK  ]
    [   41.516300] vmxnet3 0000:0b:00.0 eth0: intr type 3, mode 0, 3 vectors allocated
    [   41.519808] vmxnet3 0000:0b:00.0 eth0: NIC Link is Up 10000 Mbps
    udhcpc: started, v1.30.1
    eth0      Link encap:Ethernet  HWaddr 00:11:32:FD:E9:26  
              inet addr:192.168.1.85  Bcast:192.168.1.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:1054 (1.0 KiB)  TX bytes:989 (989.0 B)
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:65536  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    
    :: Starting syslogd ... [  OK  ]
    :: Starting scemd
    :: Starting services in background
    Starting findhostd in flash_rd...
    Starting services in flash_rd...
    Running /usr/syno/etc/rc.d/J01httpd.sh...
    Starting httpd:80 in flash_rd...
    Starting httpd:5000 in flash_rd...
    Running /usr/syno/etc/rc.d/J03ssdpd.sh...
    /usr/bin/minissdpd -i eth0
    (15): upnp:rootdevice
    (51): uuid:upnp_SynologyNAS-001132fde926::upnp:rootdevice
    (56): Synology/synology_bromolow_3615xs/7.0-42218/192.168.1.85
    (45): http://192.168.1.85:5000/description-eth0.xml
    Connected.
    done.
    /usr/syno/bin/reg_ssdp_service 192.168.1.85 001132fde926 7.0-42218 synology_bromolow_3615xs eth0
    Running /usr/syno/etc/rc.d/J04synoagentregisterd.sh...
    Starting synoagentregisterd...
    Running /usr/syno/etc/rc.d/J30DisableNCQ.sh...
    Running /usr/syno/etc/rc.d/J80ADTFanControl.sh...
    Running /usr/syno/etc/rc.d/J98nbnsd.sh...
    Starting nbnsd...
    Running /usr/syno/etc/rc.d/J99avahi.sh...
    Starting Avahi mDNS/DNS-SD Daemon
    cname_load_conf failed:/var/tmp/nginx/avahi-aliases.conf
    :: Loading module etxhci-hcd ... [  OK  ]
    :: Loading module hid ... [  OK  ]
    :: Loading module usbhid[   49.009170] usbcore: registered new interface driver usbhid
    [   49.011259] usbhid: USB HID core driver
     ... [  OK  ]
    Excution Error
    ============ Date ============
    Sun Jan 30 15:06:48 UTC 2022
    ==============================
    
    starting pid 5521, tty '': '/sbin/getty 115200 console'
    
    Sun Jan 30 15:06:48 2022
    
    
    DiskStation login: [  115.629986] md1: detected capacity change from 2147418112 to 0
    [  115.632093] md: md1: set sdl2 to auto_remap [0]
    [  115.633729] md: md1 stopped.
    [  115.634788] md: unbind<sdl2>
    [  115.647058] md: export_rdev(sdl2)
    [  118.701545] md: bind<sdl1>
    [  118.703975] md/raid1:md0: active with 1 out of 16 mirrors
    [  118.706806] md0: detected capacity change from 0 to 2549940224
    [  121.717560] md: bind<sdl2>
    [  121.719594] md/raid1:md1: active with 1 out of 16 mirrors
    [  121.721664] md1: detected capacity change from 0 to 2147418112
    [  121.736080]  md1: unknown partition table
    [  121.748802]  md0: unknown partition table
    [  122.052873] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0)
    [  122.056229] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0)
    [  122.068882] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
    [  122.125077] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0)
    [  122.128560] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0)
    [  122.140716] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
    [  122.152413] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (2c0)
    [  122.155946] EXT2-fs (md0): error: couldn't mount because of unsupported optional features (2c0)
    [  122.168018] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)

     

     

    Thank you for any help.

     

  2. - Outcome of the update: SUCCESSFUL

    - DSM version prior update: DSM 6.2-23739 Update 2

    - Loader version and model: JUN'S LOADER v1.03b - DS3617xs

    - Using custom extra.lzma: NO

    - Installation type: VM - ESXi 6.5

    - Additional comments: Changed network adapter from VMXNET to E1000e, removed SCSI controller and attached storage disks to new added SATA Controller (1), changed USB controller from version 2.0 to 3.0

  3. Hello,

     

    so I'm successfully set up Reverse Proxy on IIS today to access to my DSM through my own domain and without port. And I found an interesting thing. Everything works great except when I'm redirect to https://mydomain.com/webman/index.cgi or https://mydomain.com/webman. I found this, when I playing with Office. When I wanted to create a new document, every time it redirected me to login page without rewrite to address https://ipaddress:5001/webman/index.cgi and I don't know why. Why every other pages works and this don't? Even If I create Portal Application with alias rewrite works.

     

    Here's my rewrite rules:

    <rewrite>
      <rules useOriginalURLEncoding="false">
        <clear />
        <rule name="HTTP/S to HTTPS Redirect" enabled="true" stopProcessing="true">
          <match url="(.*)" />
          <conditions logicalGrouping="MatchAny">
            <add input="{SERVER_PORT_SECURE}" pattern="^0$" />
          </conditions>
          <action type="Redirect" url="https://{HTTP_HOST}{REQUEST_URI}" redirectType="Permanent" />
        </rule>
        <rule name="ReverseProxyInboundRule2" enabled="true" stopProcessing="true">
          <match url="(.*)" />
          <action type="Rewrite" url="https://192.168.1.240:5001/{R:1}" appendQueryString="true" logRewrittenUrl="true" />
        </rule>
      </rules>
    </rewrite>

     

    Thanks for your help and suggestions.

  4. Outcome of the update: SUCCESSFUL

    DSM version prior update: DSM 6.2-23739 Update 1

    Loader version and model: JUN'S LOADER v1.03b - DS3617xs

    Using custom extra.lzma: NO

    Installation type: VM - ESXi 6.5

    Additional comments: REBOOT, OK!

  5. Thank you for your replies. The problem is, that I have small disks on my server and I want to manage these drives by ESXi for now because I'd like use this drives not only for DSM, but for other systems too. So, If I undrestand correctly. Even If I extend the space for the virtual disks in ESXi and the RAID group is already created in DSM, the change will not take effect. So your suggestions is create JBOD at the beginning for 100-200 GB and then expand it by adding next 50-100 GB virtual drives?

     

    Thanks

  6. Hello,

     

    I'd like to ask. I want to use DSM on ESXi, but I have a question about disks and RAID's. I don't have much capacity, so I'd like to expand size gradually depends on free space and I don't want to use mirroring and data protection for now, so I'm thinking about RAID 0, JBOD or Basic. My idea is, that I assign about 150-200 GB in the beginning and then I will expand the space about 50 GB in the future.

    I tried expand the space in ESXi, but in DSM I saw that the disk is bigger, but I couldn't somehow expand the space on existing RAID group.

     

    Could anyone help me, how can I solve this situation with expanding existing RAID groups?

     

    Thanks

  7. Hello everyone,

     

    I'm trying to install DSM 6.0.2-8451 to my older AMD computer. So I downloaded the Jun loader v1.0.1 and then I added to my flash drive the img file with Win32DiskImager. After that I went to the grub file and edited vid and pid like was write in the tutorial.

    The problem is when I want to boot from the flash drive. It stuck on booting the kernel and then nothing. I'm trying to find this computer but nothing.

     

    Can anyone help me please?

     

    Oh.. and can I ask. Is 6.0.2-8451 support IDE controller?

    Thank you very much

  8. UPDATE:

    So I downloaded version DSM_DS214play_4493.pat and now everything worked.

    But I have small question. Can I somehow update from interface to newer or newest version?

    And when I boot DSM, I need to have inserted Nanoboot usb. Can I somehow boot without nanoboot when is dsm installed?

     

    Thank you

  9. That's okay :smile:

     

    So. I write to you in steps what I've done:

     

    1) I booted up nanoboot in VM

    2) Selected the First option

    3) I launched Synology Assistant from my PC to find IP address of the instance

    4) The Synology Assistant opened automatically my browser with Synology DSM web interface.

    5) I opened my router web interface to forward port 22 to IP address of the DSM instance

    6) Then I started the installation process

    7) Formatting of the drive was done, copy too and when Installation started I've got error 13.

     

    I tried option download file from web. Upload DSM file and install dsm from synology assistant. And nothing worked :/

  10. Hello everyone,

     

    I would like to install XPEnology to my oldest netbook, but for the first I want to try it on Virtual Machine. So I created Virtual Machine on x86 architecture (because the netbook supports only x86 architecture), and then one SATA hard drive disc with 10 GB space. I used NanoBoot-x86-5.0.3.1-fat for the boot and DSM_DS214play_4528. After I booted up the nanoboot and then I inserted IP address to my browser. Then I forwarded port 22 to Virtual Machine. After all that I tried to upload the DSM file, but I've got error 13 and I don't know why. This si my first question.

     

    The second question is what is the newest DSM what can I use for x86 architecture and for which device (type like DSxxx) I should use for XPEnology.

     

    Thanks for the answers and sorry for my english

×
×
  • Create New...