jpifer

I'm trying to install on a physical machine, a Lenovo DX8200C. I've tried loaders for DS918+ and DS3617xs. I've tried a couple DSM versions. They all do the same thing. I've tried the same DS and DSM version that I have running on a desktop install, so I know they are supported. I can boot from the USB drive, get an IP address, and run through the setup. The setup sees all the drives and says they'll be erased. Setup runs, but when the system reboots it does not get an IP address and never loads. Any suggestions appreciated. Thanks!

I'm trying to use a "white box" system of mine for a new install using 6.2.3 with Jun's loader. I tested the process first on an HP desktop and it worked fine, got on the network, etc. The white box has an older Realtek NIC builtin, but did not get on the network with a standard setup. I tried the realtek drivers but still could not get an IP address. I'd rather use the NC360-T anyway, so I rebuilt the usb stick for that, but I still cannot get it to get on the network. I updated grub.cfg in for the VID and PID of the USB stick and mac addresses for the NIC. (I tried both mac's and just one of them). Example: set vid=0x1234 set pid=0x5678 set sn=01010101010101 set mac1=00112233445C set mac2=00112233445D Am I missing anything for using an HP NC360-T? Everything I've found searching suggests it should work out of the box. I also tried a newer "white box" and different HP NC360-T (updated grub.cfg for this nic) and get the same results. Any help is appreciated!

Just wondering if anyone got this running under xen? I've tried a couple things but haven't worked real hard just yet. I'm playing with it on VirtualBox right now. I'll probably try to convert this one to xen and see what happens. If anyone has proven it either way, please share. Thanks, James