[How to add drivers to Nanoboot?]

Hi, can anyone tell me if can I add driver for network card to be recognized? I try to install on a Asus Eee PC B202 AzureWave AW-NE785 witch have JMC250 network card and a x32 cpu Intel Atom N270. Everything is ok but network card does not acquire an ip address and it's because he does not have a driver.

Or can I buy an WiFi dongle from this list?: https://www.synology.com/en-global/compatibility?search_by=category&category=usb_wifi_dongles&not_recommend_mode=false&p=1

will this work for installing DSM or should be done by LAN network card? 

Or maybe can I use a USB to LAN adapter?

[[GUIDE] 32bit Nanoboot x86 How To?]

Hi, Can you help me please? I have one ATA HDD and one SATA HDD witch is seen as eSATA. Can I make it to be seen as internal HDD? I don't care if is seen as SATA or ATA, just to be seen as internal not external. thank you.

[DSM 6 on Asus Eee PC B202 AzureWave AW-NE785?]

Hi, I have an Asus Eee PC B202 AzureWave AW-NE785, I just want to ask if can I install DSM 6 or to express myself better, which is the latest version that I can install on this box and what tutorial should I follow?

 

These are specs:

• CPU
  Intel Atom N270
• Memory
  1GB
• Chipset
  Intel chipset
• Graphics
  On Board
• LAN
  10/100/1000 Mbps
• Wireless
  WLAN: 802.11 b/g/n
• Card Reader
  SD/SDHC/MS/MS Pro/MMC
• Audio chip
  Realtek ALC662 Azalia CODEC
• Front I/O port
  USB x 2, Card Reader x 1, Headphone-out jack (WO/SPDIF) x 1, MIC x 1
• Rear I/O port
  USB x 2, GigaLan x 1, Line-Out (L/R) with S/PDIF x 1*
• Power Supply
  19Vdc, 4.74A, 65W power adaptor

[After installing DSM and the server reboots, blank screen with blinking cursor]

I have same problem, if you hit ctrl+alt+del it will reboot and try again to boot from usb, or try to change/reattach usb stick then try a reboot.

[Dsm 5.2 power up problem]

but I want to auto power up if is a power loss 

[How to update from 5.0-4528 update 1 to update 2?]

Hello, I want to update from 5.0-4528 update 1 to 5.0-4528 update 2 but I get errors like corrupted file.

Any advice?

[Dsm 5.2 power up problem]

Sorry about that mistakes. Is not dsm 5.2 but dsm 5.0-4528 update 2. And what I try to say is when a power failure happens the computer is rebooting but remains stuck on black screen. I have to restart it manually. Before dsm 5.0-4528 update 2  I used dsm 5.0-4493 and this does not happen before

I will like to upgrade to 6.0.2 or even 6.1 but I think I can't because I use NanoBoot x86 on Dell GX270 Intel Pentium 4 2.8ghz, 2GB RAM, Bios A07, Integrated VGA.

[Dsm 5.2 power up problem]

Nothing?

[Dsm 5.2 power up problem]

This problem is related to xpenology because this happens since I updated to 5.0-4528 update 2.

It is not from bios or other place, it is not load the bootloader from first time, only after a restart.

[Dsm 5.2 power up problem]

Hello, I have a problem with my dsm, after a power failure the server is restarting but getting stuck on black screen with "_" blinking on top left corner, so everytime after a power up from a power failure I need to hit CTRL + ALT+DEL to manually reboot again.

Anyone know how can I fix this to if there is a power shutting down the server will reboot as normaly?

[Create volume eSATA]

Hello, I created my first Xpenology server using an old Dell optiplex gx270 with P4 2.8Ghz x32, 1Gb Ram with Nanoboot DSM-5.0-4528 DS214Play and DSM DSM-5.0-4528 update 2

I have one 80 Gb ATA HDD and inside computer I found one sata port so I connected one 2,5" SATA 500Gb. In StorageManager I created one volume using the 80Gb hdd, the 500gb hdd is seen as eSATA so I can not create a volume using it. is there any sollution to make it to be seen as ATA HDD? or is there any trick to create a volume or extend the one I already use?