dyonissos
-
Posts
10 -
Joined
-
Last visited
Posts posted by dyonissos
-
-
This is an updated synoobot file which include several updates/fixes.
if you reboot the system the system log show "system started counting down to reboot " but the system is run (all server are shut down expect VPN server)
if you shutdown the system the system log show "system started counting down to shutdown " but the system is run (all server are shut down expect VPN server)
I find I cannot connect to the vpn with PC and phone
Have you figured it out?
Same problem here.
Thanks!
-
Ok, it's dead silent now
However, i installed it on a 3.5GB internal drive, and i'm using the remaining diskspace as datastore.
The problem is that copy speed is around 50 Mb/s. Would RDM improve this?
There's one thing i noticed. The rear USB 3.0 ports are not working. Do you have any idea why?
Thanks!
-
Anybody using XPenology with the B120i on HP Gen8 Microservers?
My only concern is the noise. I need to know if using the built-in RAID controller helps iLO get the temperatures for HDDs and lower the fan speed. In AHCI mode, the fan speed is 37% and the servers is quite noisy.
Also, what synoboot version are you using? 1.4 beta seems to have issues with USB devices (UPS, printer, HDD)
Thanks!
-
I did the upgrade to 4.3-3810 Update 4 today and i'm facing an issue.
One of my USB HDDs is showing as initalizing. Also, sometimes it's not coming up after a reboot, i have to manually reset the machine.
It's a gen8 HP microserver.
Any ideas?
Thanks!
-
Installed 4.3-3810 with v1.1-beta2 of synoboot on a N36L MicroServer with 8GB ram and 5x3TB drives.
Everything works fine out of the box (as far as I can tell). Only thing I've not yet tested is WOL.
Massive thanks to everyone who has worked hard on this new release!
Same on a gen8 Microserver (G2020T CPU, 2 GB RAM, 1x TB WD RED)
The only issue is the noise. Fan is running constantly at 40-45% and it's a bit annoying.
-
I got it - the microsd card is seen as an external drive, and DSM cannot be installed on external disks.
I'm upgrading from an USB Station 2 with 2 external drives.
I hoped i can use a similar setup with the new gen8 until i get some new drives.
Thanks!
-
Got that part, i booted from an external USB thumbdrive, but i thought the OS can be loaded on the internal SD card (like ESXi for example).
If that's not possible, i'll have to find some HDDs.
Thanks!
-
Excuse my ignorance, but let me rephrase.
Can i install Xpenology on the SD card?
A simple yes/no, please
-
Trying to install xpenology 4.3 on an HP gen8 microserver, on the internal SD card, no HDD installed.
The image boots fine, i can see it detects the SD card, but cannot install. The Web Assistant says "No Hard Disk found" and the DS assistant says Server Error (Error code:38).
Any ideas?
Thanks,
[SOLVED] Tips for installing XPENology in Hyper-V
in DSM 5.2 and earlier (Legacy)
Posted
I installed DSM 5.0-4418 Beta in a Windows 2008 R2 Hyper-V machine by converting the vmdks from a VMware VM.
It boots up just fine, but i don't get the network adapter. The VM is configured with Legacy Network Adapter. Is there any way to install the network drivers?
Thanks!