mcdull
Member-
Posts
252 -
Joined
-
Last visited
-
Days Won
4
Everything posted by mcdull
-
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
A noob question. For every new loader image to test with, is it mandatory to migrate the entire system again? -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
What CPU do you have? If it just hard-reboots it means the CPU just crashed, which usually means that it doesn't support some instructions. mine is D425, probably require DS713+ image for maximum compatibility of instruction set. -
most useful stuff is to use ds app on the go, while keeping the NAS under firewall. I think it should be a norm to NOT explosing the NAS to the internet, see QNAP ransome case. So with quickconnect, it is much easier to keep using the DS service. Which can only be replaced by using VPN, which is not easy in most circumstances. Anyone has a good idea of a better implementation without quick connect?
-
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
I bet an AMD variant first will bring more benefit. I vote for 1621+ -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
probably should be the fat32 one. -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
sorry, a typo, it should be active. use any partition tools or windows diskpart. Or refer to some pages before. -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
did you set the partition to active (sorry typo before) for synoboot1? -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
seems not fatal problem here in log. -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
AFAIK, the valid mac is just needed to be input to the grub, but the actual hardware mac dose not matter, can you confirm? I used it under proxmox so I acutally put the valid mac into virtual machine as well. -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
-
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
I am no ilo user. But I guess it is possible to redirect serial out to ilo interface? -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
root then enter for nil password -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
can you hook a serial out for debug? and see if /dev/synoboot* is there? -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
seems 918 is in many way better than 3615 -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
I dont see cpufreq folder in my DSM -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
install curl for debian / ubuntu sudo apt install curl centos sudo yum install curl -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
update and preserve setting is fine -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
yup. thats the one.. but I did not test it as I dont have this issue under proxmox. -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
I remembered there is a post in this thread shared a link to fix this.. the link is a script to replace some files?... -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
check if you have /dev/synoboot* -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
I tried 3615 image in my old qnap. But it does not boot properly. In GRUB> whenever I press enter, it will reboot by itself. -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
After using the 7.0.1RC (918) on proxmox, I got quite a lot of call trace in log, and the system is very slow. Anyone experiencing the same? [ 2160.666146] INFO: task kworker/u8:4:14489 blocked for more than 120 seconds. [ 2160.668620] Tainted: P OE 4.4.180+ #42214 [ 2160.670135] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2160.671611] kworker/u8:4 D ffff8802613a3850 0 14489 2 0x00000000 [ 2160.672895] Workqueue: writeback wb_workfn (flush-btrfs-2) [ 2160.674311] ffff8802613a3850 00000000812c380a ffffffff818114c0 ffff8800367b6600 [ 2160.675579] 0000000000000000 ffff88027dc16300 7fffffffffffffff ffffffff81576880 [ 2160.676493] ffff8802613a3970 ffff8802613a3860 ffffffff81576126 ffff8802613a38d8 [ 2160.677916] Call Trace: [ 2160.678311] [<ffffffff81576880>] ? bit_wait+0x60/0x60 [ 2160.679061] [<ffffffff81576126>] schedule+0x26/0x70 [ 2160.679679] [<ffffffff81578cfe>] schedule_timeout+0x16e/0x280 [ 2160.680306] [<ffffffff810b836a>] ? ktime_get+0x3a/0xa0 [ 2160.682031] [<ffffffff81576880>] ? bit_wait+0x60/0x60 [ 2160.682702] [<ffffffff81575871>] io_schedule_timeout+0xa1/0x110 [ 2160.683374] [<ffffffff81576896>] bit_wait_io+0x16/0x60 [ 2160.683942] [<ffffffff8157663e>] __wait_on_bit_lock+0x4e/0xd0 [ 2160.684637] [<ffffffff8113124b>] __lock_page+0xab/0xb0 [ 2160.685314] [<ffffffff8108e850>] ? prepare_to_wait_event+0x100/0x100 [ 2160.685922] [<ffffffffa08c150d>] extent_write_cache_pages.isra.46.constprop.68+0x34d/0x480 [btrfs] [ 2160.686800] [<ffffffff8108e351>] ? __wake_up+0x41/0x50 [ 2160.687517] [<ffffffff81082c15>] ? update_curr+0xa5/0x130 [ 2160.688139] [<ffffffffa08c28bb>] extent_writepages+0x4b/0x60 [btrfs] [ 2160.688829] [<ffffffffa08a00b0>] ? btrfs_submit_direct+0x940/0x940 [btrfs] [ 2160.689620] [<ffffffffa089c8b6>] btrfs_writepages+0x26/0x30 [btrfs] [ 2160.690432] [<ffffffff8113ea7b>] do_writepages+0x2b/0x80 [ 2160.690986] [<ffffffffa08bd876>] ? clear_state_bit+0x156/0x1e0 [btrfs] [ 2160.691691] [<ffffffff811c34aa>] __writeback_single_inode+0x4a/0x380 [ 2160.692445] [<ffffffff811c3c69>] writeback_sb_inodes+0x1b9/0x530 [ 2160.693183] [<ffffffff811c4044>] __writeback_inodes_wb+0x64/0xb0 [ 2160.693901] [<ffffffff811c434a>] wb_writeback+0x22a/0x310 [ 2160.694571] [<ffffffff811c49f2>] wb_workfn+0x162/0x360 [ 2160.695197] [<ffffffff81073ceb>] worker_run_work+0x9b/0xe0 [ 2160.695860] [<ffffffff811c4890>] ? inode_wait_for_writeback+0x30/0x30 [ 2160.696723] [<ffffffff8106b2e3>] process_one_work+0x1e3/0x4f0 [ 2160.697559] [<ffffffff8106b61e>] worker_thread+0x2e/0x4b0 [ 2160.698251] [<ffffffff8106b5f0>] ? process_one_work+0x4f0/0x4f0 [ 2160.698850] [<ffffffff810700f5>] kthread+0xd5/0xf0 [ 2160.699369] [<ffffffff81070020>] ? kthread_worker_fn+0x160/0x160 [ 2160.699981] [<ffffffff81579fef>] ret_from_fork+0x3f/0x80 [ 2160.700547] [<ffffffff81070020>] ? kthread_worker_fn+0x160/0x160 [ 2160.701382] INFO: task SYNO.API.Auth.T:16585 blocked for more than 120 seconds. [ 2160.702204] Tainted: P OE 4.4.180+ #42214 [ 2160.702807] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2160.703679] SYNO.API.Auth.T D ffff880235643c50 0 16585 10537 0x00000000 [ 2160.704476] ffff880235643c50 000000008182ed60 ffff880274970000 ffff8802643b8cc0 [ 2160.705284] ffff88025e54d760 ffff8802643b8cc0 ffff88025e54d764 00000000ffffffff [ 2160.706104] ffff88025e54d768 ffff880235643c60 ffffffff81576126 ffff880235643c70 [ 2160.706929] Call Trace: [ 2160.707196] [<ffffffff81576126>] schedule+0x26/0x70 [ 2160.707682] [<ffffffff815763b9>] schedule_preempt_disabled+0x9/0x10 [ 2160.708367] [<ffffffff81577b6c>] __mutex_lock_slowpath+0x8c/0x100 [ 2160.709101] [<ffffffff8119add9>] ? lookup_fast+0xc9/0x320 [ 2160.709633] [<ffffffff81577bf2>] mutex_lock+0x12/0x30 [ 2160.710157] [<ffffffff8119c8fb>] walk_component+0x21b/0x330 [ 2160.710773] [<ffffffff8119db24>] path_lookupat+0xb4/0x230 [ 2160.711384] [<ffffffff811a2d0a>] filename_lookup+0x9a/0x100 [ 2160.711974] [<ffffffff8117ca4d>] ? kmem_cache_alloc_trace+0x13d/0x150 [ 2160.712665] [<ffffffff811a2a23>] ? getname_flags+0x53/0x190 [ 2160.713253] [<ffffffff811a2e23>] user_path_at_empty+0x33/0x40 [ 2160.713815] [<ffffffff8118b0ff>] SyS_access+0x8f/0x2a0 [ 2160.714307] [<ffffffff81579c4a>] entry_SYSCALL_64_fastpath+0x1e/0x8e [ 2160.714866] INFO: task synoappnotify:16640 blocked for more than 120 seconds. [ 2160.715496] Tainted: P OE 4.4.180+ #42214 [ 2160.715977] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2160.716882] synoappnotify D ffff880035693c60 0 16640 1 0x00000004 [ 2160.717741] ffff880035693c60 000000008119a7e5 ffffffff818114c0 ffff8802732ccc80 [ 2160.718576] ffff88025e54d760 ffff8802732ccc80 ffff88025e54d764 00000000ffffffff [ 2160.719414] ffff88025e54d768 ffff880035693c70 ffffffff81576126 ffff880035693c80 [ 2160.720268] Call Trace: [ 2160.720550] [<ffffffff81576126>] schedule+0x26/0x70 [ 2160.721168] [<ffffffff815763b9>] schedule_preempt_disabled+0x9/0x10 [ 2160.721904] [<ffffffff81577b6c>] __mutex_lock_slowpath+0x8c/0x100 [ 2160.722627] [<ffffffff81577bf2>] mutex_lock+0x12/0x30 [ 2160.723246] [<ffffffff811a0614>] path_openat+0x444/0x1a40 [ 2160.723882] [<ffffffff811e458a>] ? flock_lock_inode+0xda/0x280 [ 2160.724579] [<ffffffff811e47ee>] ? locks_remove_flock+0xbe/0xc0 [ 2160.725298] [<ffffffff811a390e>] do_filp_open+0x7e/0xc0 [ 2160.725897] [<ffffffff811ab2b1>] ? dput.part.25+0x91/0x200 [ 2160.726549] [<ffffffff811b1c6b>] ? __alloc_fd+0x3b/0x170 [ 2160.727187] [<ffffffff81189b4f>] do_sys_open+0x1af/0x240 [ 2160.727715] [<ffffffff8118bf3f>] SyS_openat+0xf/0x20 [ 2160.728242] [<ffffffff81579c4a>] entry_SYSCALL_64_fastpath+0x1e/0x8e [ 2160.728924] INFO: task SYNO.API.Auth.T:19202 blocked for more than 120 seconds. [ 2160.729745] Tainted: P OE 4.4.180+ #42214 [ 2160.730348] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 2160.731201] SYNO.API.Auth.T D ffff880231103c50 0 19202 10537 0x00000000 [ 2160.731980] ffff880231103c50 000000008182ed60 ffffffff818114c0 ffff88026c4f3300 [ 2160.732827] ffff88025e54d760 ffff88026c4f3300 ffff88025e54d764 00000000ffffffff [ 2160.733753] ffff88025e54d768 ffff880231103c60 ffffffff81576126 ffff880231103c70 [ 2160.734605] Call Trace: [ 2160.734819] [<ffffffff81576126>] schedule+0x26/0x70 [ 2160.735273] [<ffffffff815763b9>] schedule_preempt_disabled+0x9/0x10 [ 2160.735812] [<ffffffff81577b6c>] __mutex_lock_slowpath+0x8c/0x100 [ 2160.736580] [<ffffffff8119add9>] ? lookup_fast+0xc9/0x320 [ 2160.737218] [<ffffffff81577bf2>] mutex_lock+0x12/0x30 [ 2160.737791] [<ffffffff8119c8fb>] walk_component+0x21b/0x330 [ 2160.738406] [<ffffffff8119db24>] path_lookupat+0xb4/0x230 [ 2160.738980] [<ffffffff811a2d0a>] filename_lookup+0x9a/0x100 [ 2160.739615] [<ffffffff8117ca4d>] ? kmem_cache_alloc_trace+0x13d/0x150 [ 2160.740399] [<ffffffff811a2a23>] ? getname_flags+0x53/0x190 [ 2160.741083] [<ffffffff811a2e23>] user_path_at_empty+0x33/0x40 [ 2160.741734] [<ffffffff8118b0ff>] SyS_access+0x8f/0x2a0 [ 2160.742330] [<ffffffff81579c4a>] entry_SYSCALL_64_fastpath+0x1e/0x8e [ 2180.147079] <redpill/pmu_shim.c:324> Got 1 bytes from PMU: reason=1 hex={2d} ascii="-" [ 2180.297936] <redpill/pmu_shim.c:324> Got 1 bytes from PMU: reason=1 hex={75} ascii="u" [ 2180.298917] <redpill/pmu_shim.c:253> Executing cmd OUT_FAN_HEALTH_ON handler cmd_shim_noop+0x0/0x2d [redpill] [ 2180.298917] <redpill/pmu_shim.c:42> vPMU received OUT_FAN_HEALTH_ON using 1 bytes - NOOP -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
Is it normal that from 7.0 -> 7.0.1 also needs migration? -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
seems possibility of UEFI boot and 7.0.1. But need some customisation. -
RedPill - the new loader for 6.2.4 - Discussion
mcdull replied to ThorGroup's topic in Developer Discussion Room
I think he has enabled CSM.