Jedie

Ok. Thx for your help.

Hi JMRR! I need your help again. I have a HP n40l microserver, inside a TBS6984 DVB-S2 PCIE card. Operation system: Xpenology DSM 5.2 5967 I installed the TBS card (with your instructions) and it work good, but in the TVHeadend I can't see the SNR Level. (Not just the TVHeadent) I can see the signal strength. The play ok, all mux are ok. When I watch TV, and I want watch the infobar, I can' watch the SNR level. I don't know why. I use Opensource drivers. insmod /lib/modules/tbs/media.ko insmod /lib/modules/tbs/dvb-core.ko insmod /lib/modules/tbs/isl6422.ko insmod /lib/modules/tbs/cx24117.ko insmod /lib/modules/tbs/tas2101.ko insmod /lib/modules/tbs/saa716x_core.ko insmod /lib/modules/tbs/saa716x_budget.ko int_type=1 When I used Closed Source drivers, I saw the SNR Level, but it worked very instable. Here my dmesg, maybe it help something... dmesg [ 32.239215] usb-storage 5-3:1.0: USB Mass Storage device detected [ 32.239297] scsi4 : usb-storage 5-3:1.0 [ 32.239382] usbcore: registered new interface driver usb-storage [ 32.257789] usbcore: registered new interface driver usblp [ 32.295637] usbcore: registered new interface driver usbhid [ 32.295642] usbhid: USB HID core driver [ 32.338591] media: Linux media interface: v0.10 [ 32.426679] WARNING: You are using an experimental version of the media stack . [ 32.426679] As the driver is backported to an older kernel, it doesn't offer [ 32.426679] enough quality for its usage in production. [ 32.426679] Use it with care. [ 32.426679] Latest git patches (needed if you report a bug to linux-media@vge r.kernel.org): [ 32.426679] 82a81d9826df96cc90cebec54a00ce008719c411 support cx231xx CI func tion [ 32.464607] ata3.00: configured for UDMA/133 [ 32.464619] ata3: EH complete [ 32.464773] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 32.472481] ata2.00: configured for UDMA/133 [ 32.472494] ata2: EH complete [ 32.472664] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 32.560723] ata1.00: configured for UDMA/133 [ 32.560734] ata1: EH complete [ 32.560908] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 32.567833] SAA716x Budget 0000:02:00.0: irq 44 for MSI/MSI-X [ 32.576305] DVB: registering new adapter (SAA716x dvb adapter) [ 33.241279] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS [ 33.241578] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 33.242280] sd 4:0:0:0: [sdu] 4030464 512-byte logical blocks: (2.06 GB/1.92 GiB) [ 33.242962] sd 4:0:0:0: [sdu] Write Protect is off [ 33.242967] sd 4:0:0:0: [sdu] Mode Sense: 23 00 00 00 [ 33.243607] sd 4:0:0:0: [sdu] No Caching mode page found [ 33.243612] sd 4:0:0:0: [sdu] Assuming drive cache: write through [ 33.247506] sd 4:0:0:0: [sdu] No Caching mode page found [ 33.247514] sd 4:0:0:0: [sdu] Assuming drive cache: write through [ 33.248248] sdu: sdu1 [ 33.255594] sd 4:0:0:0: [sdu] No Caching mode page found [ 33.255601] sd 4:0:0:0: [sdu] Assuming drive cache: write through [ 33.255606] sd 4:0:0:0: [sdu] Attached SCSI removable disk [ 34.935460] ata1.00: configured for UDMA/133 [ 34.935471] ata1: EH complete [ 35.028823] ata2.00: configured for UDMA/133 [ 35.028834] ata2: EH complete [ 35.073324] ata3.00: configured for UDMA/133 [ 35.073336] ata3: EH complete [ 35.645261] cx24117 1-0055: creating new instance [ 35.645271] i2c i2c-1: cx24117: Attaching frontend 0 [ 35.645280] isl6422_write: write reg 45 [ 35.650195] isl6422_write: I/O error <-5> [ 35.650197] isl6422_set_current: I/O error <-5> [ 35.650204] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 0 does n't seem to have a isl6422b on the i2c bus. [ 35.650498] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:e8 [ 35.650503] SAA716x Budget 0000:02:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 35.650822] DVB: registering new adapter (SAA716x dvb adapter) [ 35.651578] cx24117 1-0055: attaching existing instance [ 35.651586] i2c i2c-1: cx24117: Attaching frontend 1 [ 35.651592] isl6422_write: write reg C5 [ 35.656511] isl6422_write: I/O error <-5> [ 35.656513] isl6422_set_current: I/O error <-5> [ 35.656518] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 1 does n't seem to have a isl6422b on the i2c bus. [ 35.656811] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:e9 [ 35.656817] SAA716x Budget 0000:02:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 35.657596] DVB: registering new adapter (SAA716x dvb adapter) [ 35.658746] cx24117 0-0005: creating new instance [ 35.658752] i2c i2c-0: cx24117: Attaching frontend 0 [ 35.658758] isl6422_write: write reg 45 [ 35.663657] isl6422_write: I/O error <-5> [ 35.663659] isl6422_set_current: I/O error <-5> [ 35.663665] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 2 does n't seem to have a isl6422b on the i2c bus. [ 35.663959] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:ea [ 35.663963] SAA716x Budget 0000:02:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 35.664736] DVB: registering new adapter (SAA716x dvb adapter) [ 35.665277] cx24117 0-0005: attaching existing instance [ 35.665285] i2c i2c-0: cx24117: Attaching frontend 1 [ 35.665290] isl6422_write: write reg C5 [ 35.670185] isl6422_write: I/O error <-5> [ 35.670187] isl6422_set_current: I/O error <-5> [ 35.670192] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 3 does n't seem to have a isl6422b on the i2c bus. [ 35.670488] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:eb [ 35.670492] SAA716x Budget 0000:02:00.0: DVB: registering adapter 3 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 36.503892] FAT-fs (sdu1): Volume was not properly unmounted. Some data may b e corrupt. Please run fsck. [ 39.421747] loop: module loaded >[ 39.902153] init: smbd main process (19211) killed by HUP signal >[ 39.902241] init: smbd main process ended, respawning [ 45.060002] usbcore: registered new interface driver usbserial [ 45.090969] usbcore: registered new interface driver ftdi_sio [ 45.090990] usbserial: USB Serial support registered for FTDI USB Serial Devi ce [ 45.104042] pl2303: version magic '3.10.77 SMP mod_unload ' should be '3.10.3 5 SMP mod_unload ' [ 45.555153] findhostd uses obsolete (PF_INET,SOCK_PACKET) [ 52.161850] i2c i2c-0: cx24117_load_firmware: FW version 9.1.10.0 [ 52.161865] i2c i2c-0: cx24117_firmware_ondemand: Firmware upload complete [ 52.225566] SAA716x Budget 0000:02:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (950000..2150000) [ 52.396580] SAA716x Budget 0000:02:00.0: DVB: adapter 2 frontend 0 frequency 0 out of range (950000..2150000) [ 53.874399] i2c i2c-1: cx24117_load_firmware: FW version 9.1.10.0 [ 53.874415] i2c i2c-1: cx24117_firmware_ondemand: Firmware upload complete [ 53.917413] SAA716x Budget 0000:02:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000) [ 54.107675] SAA716x Budget 0000:02:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000) [26762.134524] type=1400 audit(1496917593.692:2): apparmor="DENIED" operation="m kdir" parent=29831 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=29865 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 [26766.033287] type=1400 audit(1496917597.590:3): apparmor="DENIED" operation="m kdir" parent=29891 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=29925 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 Hide Thx for your time. Regards, Peter

I tried everything, but did not fix it. So I deleted the TVH 4.1, and I installed TVH 4.0.8-1. It fixed my problem. Posted via Xpenology.us

Thanks for your help. I think I will wait for the 4.0.9 version. I have 4.1 custom version now. The biggest problem with this, when I wach the any channel on TV (streaming) sometimes the streaming is frozen. The TVH write this: "can not decode...channel". If I push the stop button, and I start the channel again, it's ok. I use the OSCAM, but it worked fine latest to my wetek play. I think it's the TVH problem. Or not? Maybee driver problem? Posted via Xpenology.us

Hi JMRR. I was search the working, stable TVHeadend version of my synology (bromolow). I found the syno.dierkse.nl 4.0.8-1 version, but it is not working. (acces denided problem). Could you help me? Now I have the 4.1 custom version, but it isn't too good. It has a some bugs. Posted via Xpenology.us

After when I load these modules and restart my Nas, I run the dmesg. The card had to two other modules. (isl6423.ko, and tbsfe.ko) I restarted, and I loaded again all of these modules. And finally my card working perfect! Thank you very much JMRR! You are the best! Posted via Xpenology.us

Huh we wrote at same time. Ok I will try these first. Thank you. Posted via Xpenology.us

I searched in google very much about my problem. Maybee it's not a driver problem. I will set up for a bigger (110 cm) parabola at the next weekend, and I will try that. Maybee it will fix my problem. See you soon. Posted via Xpenology.us

I loaded to isl6422.ko module. I wrote wrong earlier to my previous post. Posted via Xpenology.us

I loaded to isl6224.ko module. But the problem is same. Few channels (of course the best channels) not working. If I use the wetek play, this chanels are working. Maybe the TBS tuner is worse that Wetek tuner. Here my dmesg: [ 111.390339] media: Linux media interface: v0.10 [ 126.132011] WARNING: You are using an experimental version of the media stack . [ 126.132011] As the driver is backported to an older kernel, it doesn't offer [ 126.132011] enough quality for its usage in production. [ 126.132011] Use it with care. [ 126.132011] Latest git patches (needed if you report a bug to linux-media@vge r.kernel.org): [ 126.132011] 82a81d9826df96cc90cebec54a00ce008719c411 support cx231xx CI func tion [ 303.117444] SAA716x Budget 0000:02:00.0: irq 44 for MSI/MSI-X [ 303.125200] DVB: registering new adapter (SAA716x dvb adapter) [ 306.192354] cx24117 1-0055: creating new instance [ 306.192364] i2c i2c-1: cx24117: Attaching frontend 0 [ 306.197338] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 0 does n't seem to have a isl6422b on the i2c bus. [ 306.197632] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:e8 [ 306.197637] SAA716x Budget 0000:02:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 306.197828] DVB: registering new adapter (SAA716x dvb adapter) [ 306.198735] cx24117 1-0055: attaching existing instance [ 306.198744] i2c i2c-1: cx24117: Attaching frontend 1 [ 306.203685] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 1 does n't seem to have a isl6422b on the i2c bus. [ 306.203979] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:e9 [ 306.203984] SAA716x Budget 0000:02:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 306.204147] DVB: registering new adapter (SAA716x dvb adapter) [ 306.204917] cx24117 0-0005: creating new instance [ 306.204923] i2c i2c-0: cx24117: Attaching frontend 0 [ 306.209867] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 2 does n't seem to have a isl6422b on the i2c bus. [ 306.210160] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:ea [ 306.210164] SAA716x Budget 0000:02:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 306.210320] DVB: registering new adapter (SAA716x dvb adapter) [ 306.211175] cx24117 0-0005: attaching existing instance [ 306.211179] i2c i2c-0: cx24117: Attaching frontend 1 [ 306.216162] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 3 does n't seem to have a isl6422b on the i2c bus. [ 306.216458] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:eb [ 306.216462] SAA716x Budget 0000:02:00.0: DVB: registering adapter 3 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 578.203821] type=1400 audit(1473078713.894:3): apparmor="DENIED" operation="m kdir" parent=23629 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=23663 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 [ 593.187847] SAA716x Budget 0000:02:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (950000..2150000) [ 593.272870] SAA716x Budget 0000:02:00.0: DVB: adapter 2 frontend 0 frequency 0 out of range (950000..2150000) [ 593.359476] SAA716x Budget 0000:02:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000) [ 593.528517] SAA716x Budget 0000:02:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000) [ 3661.180845] type=1400 audit(1473081795.907:4): apparmor="DENIED" operation="m kdir" parent=25709 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=25743 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 [ 3664.169337] type=1400 audit(1473081798.895:5): apparmor="DENIED" operation="m kdir" parent=25770 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=25805 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 [ 5812.552876] type=1400 audit(1473083946.576:6): apparmor="DENIED" operation="m kdir" parent=30745 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=30779 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 Posted via Xpenology.us

If need it I can post my dmesg output (only dvb lines). Here: [ 48.953291] pl2303: version magic '3.10.77 SMP mod_unload ' should be '3.10.3 5 SMP mod_unload ' [ 60.032135] type=1400 audit(1473021345.367:2): apparmor="DENIED" operation="m kdir" parent=22399 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=22433 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 [ 137.525934] media: Linux media interface: v0.10 [ 151.459306] WARNING: You are using an experimental version of the media stack . [ 151.459306] As the driver is backported to an older kernel, it doesn't offer [ 151.459306] enough quality for its usage in production. [ 151.459306] Use it with care. [ 151.459306] Latest git patches (needed if you report a bug to linux-media@vge r.kernel.org): [ 151.459306] 82a81d9826df96cc90cebec54a00ce008719c411 support cx231xx CI func tion [ 222.423646] SAA716x Budget 0000:02:00.0: irq 44 for MSI/MSI-X [ 222.431701] DVB: registering new adapter (SAA716x dvb adapter) [ 225.500197] cx24117 1-0055: creating new instance [ 225.500207] i2c i2c-1: cx24117: Attaching frontend 0 [ 225.501463] DVB: Unable to find symbol isl6422_attach() [ 225.501477] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 0 does n't seem to have a isl6422b on the i2c bus. [ 225.501776] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:e8 [ 225.501782] SAA716x Budget 0000:02:00.0: DVB: registering adapter 0 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 225.501970] DVB: registering new adapter (SAA716x dvb adapter) [ 225.502860] cx24117 1-0055: attaching existing instance [ 225.502870] i2c i2c-1: cx24117: Attaching frontend 1 [ 225.505163] DVB: Unable to find symbol isl6422_attach() [ 225.505173] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 1 does n't seem to have a isl6422b on the i2c bus. [ 225.505473] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:e9 [ 225.505479] SAA716x Budget 0000:02:00.0: DVB: registering adapter 1 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 225.505663] DVB: registering new adapter (SAA716x dvb adapter) [ 225.506613] cx24117 0-0005: creating new instance [ 225.506622] i2c i2c-0: cx24117: Attaching frontend 0 [ 225.508314] DVB: Unable to find symbol isl6422_attach() [ 225.508324] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 2 does n't seem to have a isl6422b on the i2c bus. [ 225.508620] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:ea [ 225.508625] SAA716x Budget 0000:02:00.0: DVB: registering adapter 2 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 225.508835] DVB: registering new adapter (SAA716x dvb adapter) [ 225.509745] cx24117 0-0005: attaching existing instance [ 225.509753] i2c i2c-0: cx24117: Attaching frontend 1 [ 225.511247] DVB: Unable to find symbol isl6422_attach() [ 225.511259] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 frontend 3 does n't seem to have a isl6422b on the i2c bus. [ 225.511557] SAA716x Budget 0000:02:00.0: TurboSight TBS 6984 MAC=00:22:ab:90 :24:eb [ 225.511562] SAA716x Budget 0000:02:00.0: DVB: registering adapter 3 frontend 0 (TurboSight TBS 6984 DVB-S/S2)... [ 233.716157] type=1400 audit(1473021519.000:3): apparmor="DENIED" operation="m kdir" parent=22590 profile="/usr/syno/synoman/webman/index.cgi" name="/usr/syno/ synoman/synohdpack/tmp/" pid=22624 comm="mkdir" requested_mask="c" denied_mask=" c" fsuid=0 ouid=0 [ 248.225096] SAA716x Budget 0000:02:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (950000..2150000) [ 248.310624] SAA716x Budget 0000:02:00.0: DVB: adapter 2 frontend 0 frequency 0 out of range (950000..2150000) [ 248.375206] SAA716x Budget 0000:02:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000) [ 248.439065] SAA716x Budget 0000:02:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000) [ 300.217050] SAA716x Budget 0000:02:00.0: DVB: adapter 3 frontend 0 frequency 0 out of range (950000..2150000) [ 300.282490] SAA716x Budget 0000:02:00.0: DVB: adapter 2 frontend 0 frequency 0 out of range (950000..2150000) [ 300.326451] SAA716x Budget 0000:02:00.0: DVB: adapter 1 frontend 0 frequency 0 out of range (950000..2150000) [ 300.412110] SAA716x Budget 0000:02:00.0: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000) NAS

Yes of course, I put it. Posted via Xpenology.us

Yes of course, I put it. Posted via Xpenology.us

Hi I installed my TBS6984 card. Succes. I followed your instuctions JMRR. Thank you very much. But I have a little problem. When I search the muxes in tvheadend,, it find lot of muxes, but a few muxes failed. I have a Wetek Play with dual DVB-S2 tuner (I want to change it for the TBS card and NAS) and it's find this muxes. I don't know why it doesn't work as same, but but I know, I not loaded one of the missing module (cx24132.ko). Is it possible that's the problem? I tried some tvheadend version. Any idea? Posted via Xpenology.us

Hi I installed my TBS6984 card. Succes. I followed your instuctions JMRR. Thank you very much. But I have a little problem. When I search the muxes in tvheadend,, it find lot of muxes, but a few muxes failed. I have a Wetek Play with dual DVB-S2 tuner (I want to change it for the TBS card and NAS) and it's find this muxes. I don't know why it doesn't work as same, but but I know, I not loaded one of the missing module (cx24132.ko). Is it possible that's the problem? I tried some tvheadend version. Any idea? Posted via Xpenology.us