Flarup
-
Posts
35 -
Joined
-
Last visited
Posts posted by Flarup
-
-
i have now made a new boot loader, the problem is that I I use a Mac with VMware and it won't work for some reason I just used my dads pc and wept now I got the cfg file
-
11 minutes ago, Olegin said:
Put img file in the root of your windows disk - c:/
tha didnt help I still got the message this img has no partitions
-
I can't select any partitions the img file in osfmount, it says no partitions found on this img
-
I can't figure out how to use the off software should I just mount the synoboot.img in it ?
if yes I only can mount the full omg not choose any with 15 mb
-
OK thanks I just installed the xpenology tool I try this
-
Just now, Dfds said:
Did you mount the img file in osfmount?
no I did it with win32diskimager
-
the problem is that I have no cfg file at all
-
Hey I need som e help
I just created and reset on my HP Proviant Gen 8 with DSM 6.1.7 Update 2
now the Dam says they can see that have have moved my harddrive from an old nas
so I only have the option to migrate
when I try to migrate with the 6.1.7 pat it says the files is broken
i also tried to update my bootloader but I get no cfg file on my usb pen
please help me .9
-
hello I have no settings in power settings
here is a log
file:///Users/JFK/Downloads/syslog_2016-9-21-17_43_2.html
-
I have a problem with my synology.
It has started to go into sleep mode at night and will not start up again.
When I physically press the power shuts the server down and I must press on physical power back where it then starts up again and starts and runs fine otherwise again until the next night.
I've set it up for static ip and reserved ip to my router.
Some have a solution to the problem
-
Thank you for the suggestion, but I think there should be a more logical solution to this.
I can only say that it worked for me
-
How whould this solve the problem?
I had the 5-5592 and upgraded to 5644 and still the same problem so , I don`t think upgrading to 6.0 and downgrading would solve the issue.
i dont no, bu it could have something to to with dam 6.0 if you had upgraded to that earlier
when i have these problems i just try something and sometimes it works
-
Any chance to restore the icons ?
I have reinstalled the 5.2 pat . Maybe there is a solution to read the files from a 5.2 pat and put them in place manually. What I think is that some master layouts files remained from 6.0 and the path to the css and icons in there are wrong.
Have you tried to upgrade to DSM6.0 again and then downgrade again ?
-
Didn`t work.
ok then try to update to dam 6.0 and be sure to complete the update
after that then downgrade to dam 5.2 the way its told before
-
Didn`t work.
ok then try to update to dam 6.0 and be sure to complete the update
after that then downgrade to dam 5.2 the way its told before
-
I have downgrade from 6 to version 5.2-5544.5. Everything is working , except the icons disapeared from the menu`s and checkboxes. Only the icons disapeared, i can still use the checkboxes and menu.
Is there any way of restoring the icons?
had the same problem with DSM 6.0
I don't know if it working, but try to reinstall the pat file with 5.2
-
I have downgrade from 6 to version 5.2-5544.5. Everything is working , except the icons disapeared from the menu`s and checkboxes. Only the icons disapeared, i can still use the checkboxes and menu.
Is there any way of restoring the icons?
had the same problem with DSM 6.0
I don't know if it working, but try to reinstall the pat file with 5.2
-
You shal not choose formate disk if you got that option
Sent from my iPhone using Tapatalk
-
Yeps Choose clean installation
And be sure you have the right pat file [emoji3]
Don't worry you only loose all your settings and packages but you don't loose any data
Sent from my iPhone using Tapatalk
-
I need some help / assistance here!!
I stupidly left the XPEnology Diskstation to auto update and its updated itself, all I get now when I log into the Diskstation via the Web Assisant is;
"We've detected that the hard drives of your current DS3615xs, had been moved from a previous DS3615xs, and installing a newer DSM is required before continuing"
Device info;
FW 5.2-5644
DSM Ver; 6.0-7321
I've tried to install via the Web Assisant, nothing seems to install, I just go back to the above message on rebooting
If i check the status via Synology Assistant it reports as "Migratable"
I've also hooked up a monitor to the diskstation but cant log in, the keyboard doesnt seem to work.
I dont even think SSH is enabled either;
help anyone!!
when you are on the screen "migrate" be sure you have the right pat file local on your computer, then choose to update manual
when you get the next screen with two options choose option 2
if it fails, then try again
i did this two times before it would downgrade
-
I did the update to 6.0 aswell, I now have no volume (shows 6 unused disks)
I was using SHR on 6x6TB drives in a microserver
Have I lost my data as I cant see the volume? ...or do I just need to roll back to 5.2?
Thanks
You have not lost your data as long you'd did not formatted the disk
Before you go back to 5.2 be sure you have the right pat file
then complete the 6.0 update
put your usb with the expenoboot file in to your server
be sure that you have a screen connected to your server with the via cable restart your server boot with usb
then choose the install/update 5.2
then go back to your computer and look for your server with sinology assistant
choose to manual update and then browse to the 5444.4 pat file and then follow the instructions
-
Now the all thing is working again, thanks to your very kind of help
thank you very much
as i told before im pretty new, so to understand it right
is it necessary to have an usb with the Xpenobott in the server all the time ?
if yes, to get the newest version of Xpenoboot is it then just to copy past to the usb ?
-
Ok now i found y server and was logged in to DSM
But yet another problems is showing
DSM is telling me that there is a new update the update is update 5, last time this came i just installed it directly from dsm without problems, but now dsm tells me the file is broken what to do ?
-
i have tried both option 1 and 2 with option 1 it just initialising and then come with an error 13 the file is broken (i use the file from xepenology.me)
with option 2 i start to formate, but after 10 % it stops and come with the same error
make an clean installation Help Needed
in DSM 6.x
Posted
Sorry i thought that VMware was like windows
i already tried with Mac but there I didn’t get the cfg file either