razer1x2

hi, A long time ago, I installed DSM4.3 when building my server. It has worked flawlessly until now on 4.3 build. Ive got 3x2tb drives in the machine. If I remove these prior to reinstallation of the latest build, will this leave the data intact on the drives and as they should be in the hybrid array?? Any tips on updating? Or things I need to know? Any guides would be helpful. Cheers,

My Startup still refuses to work right at all.. Thinking of swapping to the original 4.2 build and use a raspberry pi for VPN and then see if I can get WOL to work on 4.2 as never really tried properly..

I cant seem to get that to work either?? Tried it last night and didnt want to shut down so not sure where to go now??......

Yeah mangaged to find the WOL settings for the eth0 config.. WOL working but now cant get scheduled shutdown/startup to work on 4.3? The scheduling accepts the schedule's and saves ( still there even after shutdown! ) but refuses to do anything? Not sure if setting in the modded Bios refusing to let it do it or something in the 4.3 build?? 4.2 was working fine! :S Ry

Hi guys, Yet again, Looking for advice/ help.. I have a N54L microserver in stock config with 3x2tb hdds running 4.3 build successfully natively.. Works pretty well actually Trying to get WOL working but had no luck. Wol is enabled in Bios so that side seems ok but as soon as I try to enable it in the DSM control panel, it refuses it saying it hasnt saved changes to WOL config. I remember reading about making changes to the etho config directly from SSH'ing into the machine but cant seem to find it. - Can someone talk me through the steps I need to do to change this? I can SSH into it ( from Mac terminal ) so that's fine. Just need the cmd line stuff really... Bit of a newbie for cmd line work/ linux in general! Cheers, Ryan ** Edit** Now got Schedule startup/shutdown is playing up! Might have to go back to 4.2 build.... Unless anyone got suggestions??

Got VPN working now... A little bit of tinkering and it now works on 4.3 build... Now to try and get WOL working so I can boot the machine remotely.. Am planning on moving VPN server from xpenology to Raspberry PI if I can get WOL to work... We shall see.. Any demo's/ instructions for WOL would be grateful! Lol.. Raz

Ports all open right... Been through about 20 combinations of ports and forwarding to no avail.. Ports are right as it will get as far as the authentication stage at which point I use my login which has admin rights and gets refused. Try default admin ( the one setup with) same problem so gathered its not a port problem.. I could understand the port problem being the case if it wouldn't connect at all but it does?? Thanks for the help anyhow.. WIll also try when I update to 4.3 tomorrow and see if it makes any difference.. Still looking at going hardware anyway as means can vpn into network and wol..

Glad im not the only one with issues! Im about to try the 4.3 build to see if makes any difference aswell as try to get the WOL to work.. If I cant get VPN to work then looking at going hardware based with VPN switch or router... Will have to see...

Hi, My first post here and I have read what I can and still confused and cant seem to find what im looking for.. plus the search doesn't seem to want to find anything - Terms too generic/common? Im new to installing Xpenology and have got a successful install but a few bugs are present. Hardware wise, specs for install are: HP N54L Microserver std config with 250gb hdd / 2gb ram.. 3x2tb hdd's Onboard NIC Network specs: Virgin Media Superhub Business 50mb Netgear 200mb Homeplugs connected to router and server Clients: Macbook Pro ML Iphone's Windows Hardwired desktop 2ft from server connected to same homeplug as is 4way switch model.. The problems im having are: HDD's dont seem to want to spin down. Nor do I have WOL working. Says cannot make changes to WOL setup.. Problem with Mac address from digging? Also cant connect via openvpn to the server from outside the network. Everything works fine except for the spindown of the hdd's and the VPN tunnel. I can get to the authentication stage at which point it asks for the Username and password - Which are the User's ones ( have tried all of my users accounts and even made new one to try still no luck. I have ports forwarded right on the SH - Port 1194 on both the SH and also in the Firewall, and router config for DSM. I have a dynamic IP so use the DDNS service free with a synology domain. I have used this external WAN ip for the connection in the config file for OpenVPN and do get as far as authentication so thats all fine. Now im stuck and not sure what to try. Oh im connecting using tunnelblick for mac as the VPN tunnel platform. I tried PPTP but couldn't get it to connect at all?? NOW HELP! Please! Cheers, Ryan